Municipal Administration And Water Supply Department Tender

Repairing Work of Shredding Machine Rotary Blade Type of Cutting Blades including all cost and conveyance of all materials to site and removing and refixing of Cutting Blades and all labour chrges etc., complete as directed by the departmental officers

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply, Delivery and Laying of Water Proofing Bituminous Black Sheet with 3mm thickness including all cost and conveyance of materials to site including labour charges etc., complete and as Directed by the Departmental Officers

Repairing Work of Shredding Machine Rotary Blade Type of Shredding Blades Rod including all cost and conveyance of all materials to site and removing and refixing of Shredding Blades Rod and all labour chrges etc., complete as directed by the departmental officers

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., Gear Operated Type (M-0402)

Repairing Work of Shredding Machine Rotary Blade Type of Bolt and Nut Full Set including all cost and conveyance of all materials to site and removing and refixing of Bolt and Nut Full Set and all labour chrges etc., complete as directed by the departmental officers

Goods and Service Tax @ 18%

Repairing Work of Shredding Machine Rotary Blade Type of Starter including all cost and conveyance of all materials to site and removing and refixing of Starter and all labour chrges etc., complete as directed by the departmental officers

Paving the floor with Kota Stone Slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Fabricating Supplying and fixing of Pre Painted Galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.