Municipal Administration And Water Supply Department Tender

supply of 80 mm C.I. DOUBLE AIR VALVE AS PER ISI 14845/2000( with ISI Make ) including all cost and conveyance of all materials and labour charges etc.,complete as per standard specification

Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing GateValves(Sluice Valves) with body Bonnet of Ductile cast iron ofGrade GGG 40 or equivalent grade,Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4.All the valves should be with electrostatic powder coating both inside and out side with pocketless straight through body passage. All the valves are to be compatible for buried applicationwith pressure rating PN 10/16 200 mm D.I Sulice Valve ( with ISI Make ) including all cost and conveyance of all materials and labour charges etc.,complete as per standard specification

Supply and delivery of 30 HP Openwell Submersible pumpset conforming to IS14220/2002 and asamended there after and BEE3Star Rated capable of discharging thefollowing dutiesdueto all causes.The pump shallbewithstainlesssteelshaftanddynamically balanced ronzemixedtypeimpeller,CIFG200gradecasingandbrassscrewsandrotorshallbeofcopperrodasperIS613/1984withISImark.Thepumpsuitableforinstallationinsumpwith1.1KVgrade3coresuitablecopperflatsubmersiblecabletoalengthof15mwithnecessarycablejointsThenon-return valve locatedattheto pof the pump inthe discharge outlet connection istobe designed with minimum friction. The pump should bedirectly coupled to 2880 RPM, threephase, 50Hz(±5),415V+6%&415V-15%squirrel cageinduction motorsuitableforDOLupto5HP,FullyAutomaticAirbreakStarDeltaupto20HPandAutoTransformerstarterforabove 20 HP starting and for continuous operation.( with ISI Make ) including all cost and conveyance of all materials and labour charges etc.,complete as per standard specification

Supply and delivery of Fully Automatic AutoTransformer Starter suitable for the motor offered. Floormounting type air/oilcooled Auto Transformer Starter 40 HP with tapings at 50%,65%,80%, house dinrobuststeelchamberwitharcandmaincontactsconfirmingtoIS8544PartIVforoperationinACthreePhase50Hz(+/-5%),415V(+/-10%)withthefollowing componentsetc. undervoltagereleasewithnovoltcoil,overloadrelaywithdashpotarrangements,singlephasingpreventor,LEDON/OFFswitches,MountedAmmeter,Earthleakagerelay,contactorassemblysuitablefornextstandardKWrating,incomingandoutgoingcableentryprovisions,transformer tank including first filling of oil etc.( with ISI Make ) including all cost and conveyance of all materials and labour charges etc.,complete as per standard specification

Overload Relays: Directly operated Bimetallic Thermal overload relay which operates in case of overload and also in case of under voltage with manual and auto reset mode..30A To 50A ( with ISI Make ) including all cost and conveyance of all materials and labour charges etc.,complete as per standard specification

Electro magnetic contactors of suitable capacity in AC Three Phase rating, conforming to IS/IEC 60947-4-1 50 Amps ( with ISI Make ) including all cost and conveyance of all materials and labour charges etc.,complete as per standard specification

Electro magnetic contactors of suitable capacity in AC Three Phase rating, conforming to IS/IEC 60947-4-1 32Ampere and 50Amps .( with ISI Make ) including all cost and conveyance of all materials and labour charges etc.,complete as per standard specification

RATE FOR MIXED DIE ELECTRIC CAPACITOR WITH TNEB TEST CERTIFICATE WITH ACCESSORIES INCLUDING BANKING CONFORM TO IS 2834 ( with ISI Make ) including all cost and conveyance of all materials and labour charges etc.,complete as per standard specification

Labour charges for the erection of submersible pumpset in well /sump including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of well /sump.30HP Sub Motor ( with ISI Make ) including all cost and conveyance of all materials and labour charges etc.,complete as per standard specification

supply of 300mm RUBBER GASKETS AS PER IS 5382/1985 ( with ISI Make ) including all cost and conveyance of all materials and labour charges etc.,complete as per standard specification