Municipal Administration And Water Supply Department Tender

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam specification including premixing the materials of size 45-22.40mm, 22.40-2.36mm and 2.36mm IRC with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base / Base course on well prepared surface and compacting with vibratory roller to acheive the desired density includidng cost of materials. labour charges, rental for machinery fuel and all other incidental charges etc. complete as per clause 406 of MORTH Rev.5

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete.

Providing and laying of Tack coat using RS1 grade emulsion bitumen at the rate of 2.5kg per 10sqm over the WMM/WBM primed surface preparatory to another construction over it.including all cost & conveyance all materials labour charges hire and fuel charges etc.for machineries and all other incidental charges etc.complete. per specification of MORTH Rev.5

Providing and laying 50mm Consolidated thick Dense Bituminous Mecadam using 0.24 cum of 26.50 – 13.20 mm Graded metal and 0.25 cum of 13.20 – 2.36 mm Grade metal and 0.23 cum of 2.36 mm & below with 53.20 kgs of 60/70 Grade Bulk bitumen for premixing per 10 Sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20 – 30 ton capacity, Conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 50 mm with mechanical pavers to the specified grades and cross sections and compaction by Vibratory/Pneumatic rollers to the required density etc., including labour for loading bitumen into bitumen tank and Metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20 – 30 ton CMP With bitumen boiler tipper,trucks, paver Finisher, Vibrator rollers and all other tools and plants required,including all other incidental charges etc., complete as per standard specification using CMP Clause 505 of MORTH Rev-5

Providing and laying Bituminous Concrete 30mm Consolidated thick using 0.13 cum of 19.00 – 9.50mm,0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 mm & below with 47.50 kgs of 60/70 Grade Bulk bitumen and 2.80kg of shredded Plastic waste for premixing per 10 Sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20 – 30 ton capacity, Conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30 mm with mechanical pavers to the specified grades and cross sections and compaction by Vibratory/Pneumatic rollers to the required density etc., including labour for loading bitumen into bitumen tank and Metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20 – 30 ton CMP With bitumen boiler tipper,trucks, paver Finisher, Vibrator rollers and all other tools and plants required,including all other incidental charges etc., complete as per standard specification using CMP Clause 507 of MORTH Rev-5

Providing and laying hot applied thermo plast compound 2.50mm thick including reflecting glass beads at 250 grammes per sqm area thick of 2.5mm in exclusine of surface applied glass beads as per IRC 35 , the finished surface to be laid uniform and free from streets and holes etc., complete as per standard., specifications.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed (P & D)Data 38 - Drain

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Manufacturing, Supply and Fixing of Retro Reflective Road Name Sign Board Single Arrow of Size 1.2 x 0.6m made out of Wide Angle Cube Corner Micro Prismatic grade Sheeting Conforming to IRC-67 : 2010 & Type XI Standards of ASTM D 4956-09 Specifications and fixed over 2mm thick Aluminium Sheet & Back support frame of 25 x 25 x 3mm MS Angle. Frame Supported by 38 OD Stainless Steel pipe Vertical post with wall thickness of 2mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cm x 30xm x 45xm etc Complete. The information message shall be made out of cut out letters in Blue color transparent overlay film as per IRC 67-2010 Guidelineds. 7 years Warranty for Ratro Reflective Sheeting from the original sheeing manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the Contractor.

Towards Charges For Trowel Finishing for Top CC Pavement and Groove Cutting Charges Etc., Complete As Per Standard Specification