Municipal Administration And Water Supply Department Tender

Providing and laying Tack Coat over WBM/WMM surface using 7 kg of Emulsion Bitumen (SSI) per 10 sqm for preparatory to another bitumenous construction over it, incidental charges etc., complete as per Clasuse 503 MORTH Rev-5

Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5

Providing and laying Bituminous Concrete to 30mm thick using 0.13 cum of 19.00 - 9.50mm, 0.17cum of 9.50 -2.36mm and 0.26cum of 2.36 and below by adding 5.04Kgs of shredded plastic waste over the aggregate heated to 170 degree celcious in the central hot mix plant, mixed well with 50.30kgs of VG30 / VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5.

Raising the existing damaged UGD man hole cover to newly laid road surface level using B.W 1:5, Plastering, and RCC 1:1.5:3 mix and all labour charges, etc., complete.

Providing and laying of hot applied thermoplastic compound 2.50mm thick including reflecting glass beads at 250 grams per square meter area,thickness of 2.5mm exclusive of surface applied glass beads as per IRC:35.The finished surface to be level,uniform and free from streaks and holes.

Maufacturing,supply and fixing of retro-reflective road name sign board single arrow size 1.0 x 0.5m size made out of wide angle cube corner micro prismatic grade sheeting conforming to IRC 67:2010 & Type XI standards of ASTM D 4956-09 specifications and fixed over 2MM thick aluminium sheet& back support frame of stainless steel supported by 32NB stainless steel pipe all around and 65NB stainless steel pipe all around and 65 NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30CM x 30CM x 45CM etc., complete.The information messages shall be made out of 67-2010 guidelines,7 years pre qualification warranty for Retro reflective sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an indipendent test lab for the reflective sheeting offered shall be submitted by the contractor. including all cost of materials,labours, conveyance etc.,complete with as directed by the departmental officers.