Military Engineer Services Tender

Material and labour for preparing Old steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Supply and fixing in repairs DTGM board made of 2 mm thick PVC sheet, one side black colour and other side plain white side and numbered in red colour with reflective stickers and fixed in position by second class hardwood scantling necessary supports complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5m wide, and not exceeding 1.5m in depth for foundation etc and getting out in hard / dense soil all as specified

Material and labour for applying evenly a tack coat of PMB 40 @ 12 Kg/ Ten sqm complete all as specified and directed.

Supply and fixing in repairs sign board made of 2 mm thick acrylic sheet, coloured with reflective stickers and fixed in position with screws on existing supports complete all as specified and as directed.

Material and labour Machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

(d) 10 Users septic tank

Material and labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Demolition of Plain cement Concrete of any description and in any position n exe 15cm thk (below or above GL) all as specified and as directed.

Material and labour for 100 mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in floor, laid in panel, surface finished fair and even without using extra cement including necessary formwork complete all as specified and as directed.

Checking and attending the complaints of sewage line / manhole/septic tank blockage / leakage by cleaning of drains of dia not exceeding 150 mm including blocked manholes / Nahani traps/gully traps/was by rodding from manholes and well flushing after cleaning and removal of blocked/decomposed sludge/dirt and other material not exc 50 m and burning the same including removing and re fixing manhole covers without damaging complete all as directed by Engr-in-charge. Note: Attending 5 complaints shall be measured as a job. .

Demolition of Plain cement Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed.

Material and labour Forming Contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks old size straight or curved on plan exc 6m mean radius built in CM (1:4) all as specified.

Material and labour for preparation old or previously untreated steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Material and labour Plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in benching to manholes, coping etc.. including necessary formworks complete all as specified and directed.

Material and labour sand filling under floors or in foundation incl watering and consolidation etc complete all as specified and as directed

Demolition of Plain cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

(a) 100 users septic tank

Surface dressing not exceeding 15cm deep in hard/dense soil and levelling the uneven surface of natural ground by trimming to an even surface by removing vegetation and scrapping high patches and filling in low patches with soil to have a neat look complete all as specified and directed.

Material and labour in repairs Reinforced punched barb tape, with short barbed profile made out of GI reinforced core steel wire 2.5 mm dia and 0.5 mm cold clenched strip barbs around the core wire including 12 gauge spring steel GI wire having minimum tensile strength of 1650 kg/sqmm including fixing to concertina coil/steel posts/frames complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for TMT bars 10mm and over cut to length, bend to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed

Demolition of cement concrete reinforced cover slabs of man holes etc n.exc 15 cm thick all as specified & directed.

Supply and fixing mild steel angle iron fencing posts, struts and flat iron for fixing fencing and similar work conforming to Fe-290 Gde E- 165 including cutting tops to shape as directed, bent to shape, drilling holes, notching, hooking for wire etc. complete all directed.

Material and labour rendering 15mm thick plastering on fair faces of concrete surface in CM 1:4 with water proofing compound @ 2% by weight of cement even and fair surface complete all as specified and directed. Note:- Supply only Water proofing compound shall be measured and paid separately.

Material and labour for Precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in manhole/ gully trap cover slab set in cement mortar 1:4 including necessary form work all as specified and directed. Note: Reinforcement will be measured and paid seperately.

(b) 50 user septic tank

Returning filling in trenches including spreading levelling watering and well ramming in layers not exc 25cms in soil as specified and directed Engr-in-Charge

Material and labour 150 mm dia HDPE Pipes PN 10 including laying in trenches with all necessary fittings as specified and as directed by Engr-in-Charge

Material and labour for Plain cement concrete 1:3:6 type C2 (using 40mm graded granite stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for preparation of old plastered wall surface and applying one coat of cement base paint complete all as specified.

Repairing cracks on concrete/asphalt surfaces of runway/pavements and edges/joints using Hincol roadseal joint sealant as per IS-7124 of 2019 including preparation of surface and priming with Hincol bitumen primer all as per manufacturer's instructions and as directed by the Engineer-in-charge.

Cleaning of septic tank (By mechanical means) bailing out fluid, decomposed materials sludge etc, scrapping and washing the wall with fresh water and disposal of decomposed materials, sludge etc out side MD land complete all as directed by Engr-in-charge for the following septic tanks :-

Material and labour for preparation of new plastered wall surface and applying two coat of cement base paint over a coat of primer complete all as specified.

Dismantling wrought iron, or mild steel or cast iron work of any description not otherwise provided for complete all as directed.

Material and labour for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

Material and labour in repairs razor blade galvanised barbed Concertina coil of 1050 mm diameter made out of 2.59 mm thick galvanised wire having weight of each coil @ 15.2 kg ± 5% of coil, stretched to a length of 10 to 12 m to achieve 950 mm dia as in fencing to steel posts and to another coil/MS ribs including fixing with special galvanised fasteners such as J clips, C clips, U clips all as specified and as directed by Engineer-in-charge.

Cutting of grass and bushes upto ground level by sickle knife / grass cutting machine and scrapping with spades including removal of rubbish to a distance exceeding 1000 m outside the MD land complete all as specified and directed by Engineer-in-Charge. Note: (a) Grass cutting to be carried around the airfield operational area all as directed by Engineer-In-Charge. (b) Each cutting shall be measured separately. (c ) Rate quoted for the item is for each cutting. (d) For each cutting minimum one tractor with jungle Jim and Four hand cutting machine are to be incorporated to complete the work with in time frame. (e) All works to be executed inside technical area. The site for the work will be available in piece meal and also may be in non flying days. No claim for non availability of site on every working day will be entertained. The rates quoted shall be deemed to be considering these aspects.

Material and labour for Forming fair finish drain or channel 30cm inner girth in cement concrete using extra cement complete all as specified and as directed.

Removing excavated material/soil to a distance not exc 250 mtr but n exc 500 m away and deposing where as directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed by Engr-in-charge

Demolition of brick work built in cement mortar or lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre cast concrete articles all as specified and as directed.

(c) 25 User septic tank

Demolition and breaking up SWG drain pipe of 150mm dia set in cement concrete as in trenches as directed by Engr-in-charge Note: Excavation and RFR will measured and paid separately.

Schedule of credit amount brought back from Ser Page No.31 - Rs. 21,300.00 will be deducted from the above quoted amount to derive the contract sum. SIGNATURE OF CONTRACTOR

Taking down cement plaster on brick or stone walls etc including all quoins,arches,pillars, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Cutting of grass and bushes around concertina coil upto ground level by sickle knife / grass cutting machine and scrapping with spades including removal of rubbish to a distance exceeding 1000 m outside the MD land by removing and refixing two layered razor blade galvanised barbed Concertina coil of 1050 mm diameter in fencing to steel posts and to another coil/MS ribs including fixing with special galvanised fasteners such as J clips, C clips, U clips complete all as specified and directed by Engineer-in-Charge. Note: (a) Grass cutting to be carried around the airfield operational area all as directed by Engineer-In-Charge. (b) Each cutting shall be measured separately. (c ) Rate quoted for the item is for each cutting. (d) For each cutting minimum one tractor with jungle jim and Four hand cutting machine are to be incorporated to complete the work with in time frame. (e) All works to be executed inside technical area. The site for the work will be available in piece meal and also may be in non flying days. No claim for non availability of site on every working day will be entertained. The rates quoted shall be deemed to be considering these aspects.

Supply and fixing in repairs DTGM board made of 2 mm thick PVC sheet, one side black colour and other side plain white fixed in position by second class hardwood scantling complete all as specified and as directed.