Military Engineer Services Tender

SCHEDULE 'A'

Supply, errection, testing and commissioning of 16 Mtr high mast, suitable for 180 Km/hr wind speed continuously tapered, polygonal cross section, not less than 20 sided manufactured from MS plates, hot dip galvanized complete with all its accessories and suitable for mounting max 08 Nos of 150 to 180 watt LED luminaires consisting of head frame, pully assembly, motorized movable lantern carriage, double drum winch, 3/4 point suspension system with SS wire rope 6mm dia 7/19 gauge, trailing cable - 5 core x 4 sqmm, with integral power tool and control panel housing with suitable control gears and circuit for the operation of high mast complete all as specified & with following specification :- Design and casting of suitable shallow foundation with M-25 concrete for the high mast considering the safe soil bearing capacity at site as 10 Ton per square meter at 2m depth, design factor for safety 1.2, considering wind speed (Km/hr) is 180 (IS 875, 1987) and depth of foundation as per manufacturer instruction/design and minimum 12 Nos of foundation bolts (dia minimum 25mm) (b) Aviation obstruction lights with one numbers of LED lights fittings complete. (c) Supply and erection of hot dip galvanised lightning arrestor with 25 x 3 mm hot dip galvanised strip down conductor upto ground level. (d) LED flood light 150 watt s -08 nos .

Item No. 02 Conte....... (e) Supply, installation, testing and connecting to electical system distribution board (outdoor type - 01 No) suitbale size, factory made, double door, cubical and pedestal tyupe, compartmentalised design, back door hinged type & openable, fabricated out of 3.15 mm thick CRCA steel sheet, weather/ dust/ vvermin proof, IP 65 protection, suitable spaced totally enclosed in chamber, earthing arrangement, locking arrangement with one number lock with duplicate key duly painted with power coated paint and providing the following items including connection of all incoming and outgoing cables using suitable size lugs and glands, danger notice board, with supporting legs of angle iron of size 50 x 50 x 6mm of length 100 cm long duly grouted in PCC (1:3:6), 50cm below ground level and 50cm above ground complete all as speccified and directed by Engr-in-Charge including comprising of following items :- (i)MCCB 63 Amp, 4 pole, 415 Volts, 35 KA breaking capacity - 01 No (ii) Power contactor 3 pole, AC, 70 Amps, 50 Hz, ML type. (Make : L&T Cat Pat No SS90910 Model : ML-4 or equv) - 01 No. (iii) Timer switch, light sensing type, - 01 No. (iv) MCB 3 pole 20 Amps, AC, 415 Volts, 50 Hz - 01 No. Note :1) Excavation, PCC, nuts, bolts etc retun filing, removal all shall be deemed to be included in quoted rates as per specifications/ foundation drawing of manufacturer. 2) Design and drawings of the foundation shall be prepared as recommended by the OEM and be got approved from AGE(I) before commencement the work and the rate quoted is deemed to include for the same.Amount of foundation to be included in the quoted unit rate, No extra payment will be paid to contractor in this regard.