Military Engineer Services Tender

Material and labour for plain cement concrete 1:4:8, type D-2, using (40 mm graded aggregate), as in 50 mm thick floor, finished even and fair etc complete all as specified and as directed.

Material and labour for 15mm thick rendering with cement mortar 1:6 on stone masonry or other than fair faces of brick wall surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed.

Material and labour for 20mm thick granite stone slab flooring as per approved pattern/ size (polished/ leathered finish) machine cut, rounded edges, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone with grinding and polishing, including 20mm thick screed bed in cement mortar 1:4 etc complete all as specified and as directed.

Material and labour for 20mm thick granite stone slab as per approved pattern/ size (table rubbed and polished) as in skirtings, cills, jambs, pillars, cooking platforms and like, machine cut, rounded edges, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone with grinding and polishing, including 15mm thick backing coat in cement mortar 1:4 etc complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying two or more coats of distempering with 1st quality acrylic distemper, ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including wall care putty of average thickness of 3mm all as specified and as directed.

Material and labour for complete removal of existing treatment on surfaces of ceiling and applying two coats of oil bound distemper by approved applicator of the manufacturer of the paint over one coat 3mm thick wall care putty for even and smooth etc complete all as specified and directed.

Material and labour for complete removal of existing treatment on surfaces of wall by scrapping, washing, rubbing down and stopping of distempered and applying two coats of oil bound distemper by approved applicator of the manufacturer of the paint over one coat 3mm thick wall care putty for even and smooth etc complete all as specified and directed.

Material and labour for highly polished brass flat strips for anti slip nosing fixed in granite steps with suitable brass screws/ fasteners/ adhesives as per manufactures instruction etc complete all as specified and directed.

E/M Works Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area), drawn through and including suitable dia non metallic rigid PVC conduit (ISI marked), provision of suitable modular metal boxes flush to wall and cover plate and accessories concealed on wall/ roof including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge for the following. Note: (i) Cost of making good the disturbed surfaces is deemed to include in the unit quoted rate (ii) Cost of cutting chases is deemed to include in the unit quoted rate

One light / Exhaust fan / bell point controlled by one, one way switch

One 3 pin 5/6 Amps switch socket outlet combination point on independent board.

All as per item No. 14 described here-in-before but for point wiring with 2.5 sqmm single core standard FRLS copper conductor and one run of 2.5 sqmm FRLS copper conductor, standard for earth wire for one switch socket outlet point 15/16 amps on the independent board.

Material and labour for sub main wiring complete with and including 4 runs of 6 sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit of suitable size including accessories etc as required and concealed on walls/ roof and one run of 6 sqmm, single core FRLS, PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing sub main wiring complete all as specified and as directed. Note : (i) Four runs of 6 sqmm PVC insulated cable and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one unit length. (ii) Cost of making good the disturbed surfaces is deemed to include in the unit quoted rate (iii) Cost of cutting chases is deemed to include in the unit quoted rate

Material and labour for sub main wiring complete with and including 2 runs of 6 sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit of suitable size including accessories etc as required and concealed on walls/ roof and one run of 6 sqmm, single core FRLS, PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing sub main wiring complete all as specified and as directed. Note : (i) Two runs of 6 sqmm PVC insulated cable and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one unit length. (ii) Cost of making good the disturbed surfaces is deemed to include in the unit quoted rate (iii) Cost of cutting chases is deemed to include in the unit quoted rate

Material and labour for sub main wiring complete with and including 2 runs of 4 sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit of suitable size including accessories etc as required and concealed on walls/ roof and one run of 4 sqmm, single core FRLS, PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing sub main wiring complete all as specified and as directed. Note : (i) Two runs of 4 sqmm PVC insulated cable and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one unit length. (ii) Cost of making good the disturbed surfaces is deemed to include in the unit quoted rate (iii) Cost of cutting chases is deemed to include in the unit quoted rate

Material and labour for sub main wiring complete with and including 2 runs of 2.5 sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit of suitable size including accessories etc as required and concealed on walls/ roof and one run of 2.5 sqmm, single core FRLS, PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing sub main wiring complete all as specified and as directed. Note : (i) Two runs of 2.5 sqmm PVC insulated cable and one run of 2.5 sqmm cable and one run of PVC conduit shall be measured as one unit length. (ii) Cost of making good the disturbed surfaces is deemed to include in the unit quoted rate (iii) Cost of cutting chases is deemed to include in the unit quoted rate

Supply and fix Modular type socket outlet 2/3 pin, 6/16A combined 2 module, ISI marked complete all as specified and as directed.

Supply and fix Modular type switch single pole, 16A, one way, 1 module, 230V, AC, 50Hz, ISI marked complete all as specified and as directed.

Supply and fix Modular type switch single pole, 6A, one way, 1 module, 230V, AC, 50Hz, ISI marked complete all as specified and as directed.

Supply and fix Modular type socket outlet 6A, 1 module, ISI marked complete all as specified and as directed.

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed.

Supply and fix in repair wall mounted, 20W, LED 6000K (4 feet) LED tube light batten, minimum lumen out put 100 lum/ watts extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, lamp colour white including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in repair ultra modern, LED Surface mounted, 15 W, 6500K, elegant surface panel complete with electronic driver & high brightness LED with suitable fixing clamp and accessories including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in repair 6 Way triple pole and neutral DB, IP43, IK-09 metal double door, fitted with busbar and blanking plates, Neutral link with 4 pole TPN as incomer and SP/TP MCBs as outgoings, concealed to wall and making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair SPN DB, 08 Way, IP43, IK09, metal double door type 240 volts fitted with 200 Amps rated busbar and blanking plates, neutral link, concealed to wall and making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed by Engineer-in-Charge

Supply and fix in repair SPN DB, 12 Way, IP43, IK09, metal double door type 240 volts fitted with 200 Amps rated busbar and blanking plates, neutral link, concealed to wall and making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed by Engineer-in-Charge

Supply and fix in repair Miniature Circuit Breakers, 'B' Curve, SP, 240 Volts of capacity 40 Amps with breaking capacity 10 KA, ISI marked complete all as specified and as directed by Engineer-in-charge

Supply and fix in repair Miniature Circuit Breakers, ' C' Curve, single pole, 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA, ISI marked complete all as specified and as directed by Engineer-in-charge

Supply and fix in repair Miniature Circuit Breakers, ' C' Curve, SP&N, 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA, ISI marked complete all as specified and as directed by Engineer-in-charge

Supply and fix in repair Miniature Circuit Breakers, ' C' Curve, SP&N, 240 Volts of capacity 40 Amps as ordered breaking capacity 10 KA, ISI marked complete all as specified and as directed by Engineer-in-charge

Supply and fix in repair MCB, TPN, 10KA, 415V, "C" curve, 63A, ISI marked complete all as specified and as directed by Engineer-in-charge

Supply and fix in repairs 25mm (external dia) Rigid non-metallic medium grade PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

Supply and fix in repairs 40mm (external dia) Rigid non-metallic medium grade PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

Supply and fix Wall trunking alongwith cover made of lead free PVC, compiles to ROHS flammability at Vo as per UL 94, self fire extinguishing, standard length of 2 mtr suitable for fixing wiring devices with the support of back box and cover plates, the base of the trunking shall have perforations for anchoring, railing clip provision to facilitate partition for routing power and data cables separately, the trunking shall confirm to EN 50085-2-1, cable tray with cover clip for fixing the cover of tray, alongwith fixing accessories for accommodate power, data, communications cables and & other accessories as required at site 210 mm width x 60 mm height including taking down existing PVC conduit etc complete all as specified and as directed. Note : (i) The cable tray shall be made of poly vinyl chloride material for protection against electrical shock and interference between electrical and communication line. (ii)) All connected items to be measured and paid separately under relevant items. (iii) The cable trays shall be installed by trained technician to ensured neat installation.

Supply and fix barrier strip (Partition) of standard length of 2mtr and 60mm width for separation of cables of different voltages or functions with and including appropriate fastening materials complete all as specified and as directed.

Supply and fix End piece of size 60 x 210mm for closing of cable tray at end part including appropriate fastening materials complete all as specified and as directed.

Supply and fix Internal corner cover of dimension 210 x 60 including appropriate fastening materials complete all as specified and as directed.

Supply and fix External corner cover of dimension 210 x 60 including appropriate fastening materials complete all as specified and as directed.

Supply and fix T & Intersection cover of dimension 210 x 60 including appropriate fastening materials complete all as specified and as directed.

Supply and fix Flat angle cover of dimension 210 x 60 with including appropriate fastening materials complete all as specified and as directed.

Supply and fix Cover clip of dimension 210 x 60 for fixing of tray including appropriate fastening materials complete all as specified and as directed.

Supply and fix Cat 6 Cable, 4 Pair, unshielded twisted pair (UTP) industrial cable for LAN network complete all as specified and as directed.

Labour only for removing of existing electrical, data, LAN Network cable along with connection and conduit/Cashing-capping of any size/ type and refixing the same wire/ data cable in cable trunk with fixing accessories complete all as specified and as directed. . Note: New PVC conduit of any type if used at site is measured and paid separately under relevant items.