Military Engineer Services Tender

Removing excavated soil to a distance not exc 50 metre and depositing where directed at a level n-exc 1.5 metre above the starting pointcomplete all as specified and as directed.

Material and labour for Brick work with flyash old size bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for M-Sand Under floors as cushioning to tiles including watering and consolidation complete all as specified and directed. Note: Punned thickness shall be measured and paid

Material and labour for Hard core of gauge n exc 63 mm graded broken stone or crushed stone aggregate deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed

Material and labour for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including necessary formwork complete all as specified and as directed.

M&L for 100 mm thick Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in sub base of floorsing/hard standing, complete all as specified and directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves.Kerb stone confirming to IS 5758(1984) (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified as directed.

M&L for screed bed or bedding layer of mortar 25 mm thick for laying Kerb stone in cement mortar 1:6 complete all as specified and directed..

M&L for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified.

Material and labour for Preparation of new plasted surface surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Material and labour for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in landing, bed plates , plinth blocks, anchorage blocks, cover slab (for manholes) shelve and ssimilar articles with plain faces and necessary form work complete all as specified and as directed.

Material and labour for corrosion steel TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for providing cement concrete type C1 1:3:6 using 20 mm graded aggregate cast in situ in lintels upto 1.5M clear span ,cills, steps, plinth coursesseismic and other similar bands, parapet,copings,bed plates, water troughs and and railing upto 60 cm in height coping including wethering slightly rounded or chamfered angles and thoarting including necessary form work complete all as specified and as directed

S&F 110mm bore PVC (SWR) soil, waste and vent pipe ring socketed in any length fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.

S & F PARK BENCH ARISTOCART(Make-VEDHA, Model VS-68) etc including necessary fixing arrangements on ground with MS bolts and nuts and concrete foundations and manufactures instructions leveling ground all as shown on drawing and all as specified.

Excavating in post holes each n.exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 CM in soft/loose soil including removal of soil to a distance not exceeding 50m and making good the surface complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

supply and fix Steel Tubular truss pipe as in truss purlins, post, rafters etc, including cutting welding and buffing with special shaped washers etc confirming to Steel Grade 240 complete all as specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Make:Tata Blue Scope/Jindal/Llyod

Material and labour for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Make:Tata Blue Scope/Jindal/Llyod

Material and labour for preparation of new painted steel or iron surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including screed bed bedding layer,15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Supply and lay XLPE insulated cable screened ,PVC Bedded ,galvanized steel strip or wire armoured . heavy duty electric power cable with aluminum conductor 1100 volts grade of cross sectional area 2 core 10 Sqmm laid complete all as specified and as directed.Make : Gloster/CCI/KEI Note: Excavation, earth work and cable protection shall be measured and paid separately.

Supply, laying & testing PVC insulated multicore FR PVC sheathed multistranded cables with bright annealed electrolytic bare copper conductor of size 1.5 sq mm ,2 core, 1100 Volts grade complete all as speicfied and as directed..

Material and labour for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised iron strip 32 x 6 mm by means of bolts, nut, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earth test point including excavation, earth work in any type of soil, PCC Chamber 1:2:4, B1 type and precast RCC cover slab 50 mm thick with RCC 1:2:4 type B1 using 20mm graded stone aggregate and 8mm CTD bar 150c/c both ways funnels, watering pipe 20mm dia GI medium grade,wire mesh, GI Protection pipe 40mm dia light grade connecting test point and testing on completion and as directed. Note:-The rate quoted is inclusive of GI strip 25 x 4 mm earth conductor upto a length of 7.5m from the earth pit.

Supply and spread clean dry river sand in trenches including levelling, punning for cushioning of cables complete all as specified and as directed. Note : Punned thickness of sand cushioning shall be measured.

Supply and lay in trenches dry fly ash bricks for cable protection keeping width of the brick parallel to the length of the cable complete all as specified and as directed.

Supply, install, testing and commissioning of 9W TULIP LED Bollard with opal acrylic diffuser and IP66 protection complete all as specified and as directed. Make : Crompton / Bajaj Electricals Ltd/ Wipro/Philips/Havells .

Supply and Fix junction box made out of polycarbonate with IP66/IP67 protection of size 130x180x77 mm Model,02 Nos polycarbonate cable gland complete all as specified and as directed. Make : Hensel model no.DK - 1000G/Sintex/ Schneider

Supply and fixing of ARIAN LED post top 45 W made in die-cast aluminium bottom housang and spun aluminium top reflector with decorative clear acrylic diffuser and IP65 protection complete all as specified and as directed. Make : Crompton / Bajaj Electricals Ltd/ Wipro/Philips/Havells .

Supply and fix Digital Time Switch with Astronomical Function 250 V single Phase of 16 Amp, 50 Hz , code no 412654 rating with contactor fitted inside steel enclosure. Make - Legrand/L&T/Anchor/Havells