Military Engineer Services Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Military Engineer Services - MES Tender
Civil And Construction
Paints and Enamels
Civil Works Others
Eprocure
Opening Date12 Jul 2024
Closing Date3 Sep 2024
Tender Amount₹ 49,50,000
Costs
EMD
₹ 99,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Repair/ Maint To Damaged / Facia / Projection Of Bldgs, Wall Cracks, Roof Treatment, Kitchen Hardware, Cup Board, Painting And Other B/r Works
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_665748_1Bid Award Id
ViewTender No
8652/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking down chowkhat or frame(wooden/steel) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.
24
-
-
... More
Taking down chowkhat or frame(wooden/steel) exceeding 1.50 Sqm not exceeding 4.0 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.
30
-
-
... More
Taking down shutters of any description exc 1.0 Sq.m and n.exc 2.0 Sq.m each complete all as specified and directed.
60
-
-
... More
Resecuring without taking down chowkhats or frames but with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.
35
-
-
... More
Resecuring without taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed.
10
-
-
... More
M & L cutting holes in stone wall exc half brick and n.exc one brick in cement mortar for inserting hold fasts/lugs and making good dismantled portion in cement mortar 1:3 or 1:2:4 type B-1 concrete as required complete all as specified and as directed.
140
-
-
... More
S&F MS work (flat iron) 25mm x 3mm thick, in small articles such as hold fast and similar small articles conforming to Fe 290 Gde E-165 including taking down existing one complete all as directed.
30
-
-
... More
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified .
130
-
-
... More
S&F Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified.
25
-
-
... More
M&L Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
0.2
-
-
... More
Supply and fixing 200 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed.
30
-
-
... More
Supply and fixing in repairs 200 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed.
24
-
-
... More
Supply and fixing 100 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed.
54
-
-
... More
Supply and fixing in repairs 100 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed.
50
-
-
... More
S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete all as specified and as directed.
30
-
-
... More
S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete including taking down existing one all as specified and as directed.
42
-
-
... More
S&F 200mm extruded aluminum alloy handles, fabricated type, anodised complete all as specified and as directed.
30
-
-
... More
S&F 150mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminum alloy and fixed complete all as specified and as directed.
54
-
-
... More
S&F 200mm extruded Extruded aluminium alloy handles, fabricated type, anodised including taking down existing one complete all as specified and as directed.
20
-
-
... More
Supply and Fixing 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panels, comercial type on both faces complete all as specified and directed.
30
-
-
... More
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete including taking down existing one all as specified and directed.
90
-
-
... More
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed.
12
-
-
... More
Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete all as specified and as directed.
150
-
-
... More
S & F in repairs 100mm long Butt hinges medium weight cold rolled stainless steel, fixed in repair to wooden frame/welded to metal frame complete all as specified and directed.
340
-
-
... More
S&F Butt hinges 75 mm long medium weight cold rolled stainless steel complete all as specified and as directed.
162
-
-
... More
S & F in repairs butt hinges 75 mm long medium weight cold rolled stainless steel complete all as specified and as directed.
300
-
-
... More
S&F Factory made 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); all as specified and directed.
12
-
-
... More
M & L Preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
160
-
-
... More
Note for item No 31 :-
(a) All synthetic enamel paint shall be of 1st quality manufactured by the standard firms of make as specified.
-
-
-
... More
(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.
-
-
-
... More
(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE.
-
-
-
... More
(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite)
-
-
-
... More
(e ) Unless otherwise specified the tints of paint shall be as approved by the GE
-
-
-
... More
(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.
-
-
-
... More
(g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge.
-
-
-
... More
(h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.
-
-
-
... More
M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 60mm thickness M-35 grade, laid over and including M sand cushion of 50mm thick and packing the sides with PCC 1:3:6 type C1 (using 20mm graded stone aggregates)complete incl dismantling of existing tiles all as specified and directed.
79
-
-
... More
Note for item No 40 :- The Unit rate quoted is included for Demolition of paver tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar and removing of debris outside of MD land
-
-
-
... More
S&F in repairs Overhead Shower 95 mm (4”) dia with 3 flow Round Shape 3 Flow complete all as specified and as directed. (Make :CAT Part No- F7020302AB of CERA or equivalent in make specified in PS
30
-
-
... More
S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
20
-
-
... More
S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
30
-
-
... More
M&L in repairs Chromium plated Central hole basin mixer with 450 mm braided connection pipe (without pop-up) complete all as specified and directed. Make:-QT F2006461 HT F3001461 of CERA equivalent in make specified in PS
15
-
-
... More
S & F in repairs Vitreous China wash basin, wliile, flat back, size 580x450irun (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.
16
-
-
... More
S&F in repair Pillar taps 15mm bore CP with capstan head screwed down high pressure screwed for iron pipe including taking down existing one complete as directed by Engr-in-charge.
Make:- Cat Part No.QT F2006101, HT F3001101 of CERA or equivalent in make specified in PS
16
-
-
... More
S&F CP Hand shower (Health Faucet) with 1.20M braided hose pipe with 8mm bore wall Hook with N.R.V (Back Flow Preventor) Including taking down existing one complete all as specified and as directed by Engineer-in-Charge.
Make:- CAT Part No-F8030401AB of CERA equivalent in make specified in PS
25
-
-
... More
S & F in repairs 32mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete
12
-
-
... More
S & F in repairs 40mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete
12
-
-
... More
Resecuring or easing & adjusting without taking down of door shutter exc 1 sq. m and n exc 2 sq. m each complete
30
-
-
... More
Resecuring or easing & adjusting without taking down of Shutters of any description n exc 1 sq. m each complete
30
-
-
... More
Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and refixing same opening complete all as specified and directed.
45
-
-
... More
S & F in repairs 25 mm outer dia of pipes3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized andantimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or infloors etc. complete all as specified and directed.
200
-
-
... More
S & F in repairs 20 mm outer dia of pipes3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized andantimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or infloors etc.complete all as specified and directed.
180
-
-
... More
Note for item No 54 & 55 :-
(a) The unit rate shall be include for taking down existing GI pipe and connections and all fittings as directed.
-
-
-
... More
(b) The unit rate shall be include the cost of short lengths, with all pipe fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accssories such as pipe hooks, screws clamps etc
-
-
-
... More
(c ) Wall thickness of pipes shall be all as per IS : 15801
-
-
-
... More
S & F 20mm outer dia of pipes PPR gate valves (brass insert) as per requirement of sites incl taking down existing one complete all as specified and directed.
15
-
-
... More
S & F 25mm outer dia of pipes PPR gate valves (brass insert) as per requirement of sites incl taking down existing one complete all as specified and directed.
10
-
-
... More
S & F in repairs 25 mm PP-R Ball valves (brass insert) as per requirement of the site complete all as specified and directed.
10
-
-
... More
S&F CP 2 way bib cock with wall flange fancy type screwed down screwed for iron pipe in repairs 15mm bore Including taking down existing one complete all as specified and as directed by Engineer-in-Charge.
Make:- CAT Part No- QT F2006163 of CERA or equivalent in make specified in PS
24
-
-
... More
M&L Water proofing treatment of existing roofs as per details given below after complete removal of existing water proofing treatment and expose of top surface of RCC slab of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with water and using wire brush including removing debris to outside the MOD land complete all as specified and as directed :-
100
-
-
... More
(a) Surface should be free from any loose paint, dust or grease. Remove all existing bitumen coatings completely by using intense wire brushing, high speed water jet & vacuum cleaner for thorough cleaning of the surface to avoid ‘Peeling off’ problems.
-
-
-
... More
(b) All cracks at corner joints, channels and parapets should be properly treated. For filling cracks upto 3mm crack seal material of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical to be used. Bigger cracks, damaged portions & hollow areas must be repaired with polymer modified cement mortar.
-
-
-
... More
(c) Apply a coat of self priming smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical with 33% dilution with water using brush/roller on newly plastered surface after curing as per IS-456 and allow to dry for 4 to 6 hours (dilution & forced coverage requirement strictly as per manufacturer’s instructions).
-
-
-
... More
(d) After the primed surface has dried, apply first coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same primed surface & allow to dry for 4 to 6 hours.
-
-
-
... More
(e) Prepare for apply 2nd coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same surface. The temp to be maintained 25 to 35° C through out the all above application work.
-
-
-
... More
(f) In case of severe dampness an additional coat of damp proof materials to be applied.
-
-
-
... More
Note for item No 63 to 69 :- (i) The work shall be carried out through authorized and qualified applicators of the following manufacturers only. MOU to be submitted before commencement of work. Make : M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical
-
-
-
... More
(ii) A performance guarantee certificate for 10 years shall be submitted by the contractor to the GE on completion of work as specified.
-
-
-
... More
(iii) The unit quoted rate is deemed to include taking down of water pipeline, tanks, wires (etc) found on roof and refix at the original position after complete treatment of roof.
-
-
-
... More
(iv) The unit quoted rate shall be inclusive of material, all labours, tools and plants including scaffolding required for working upto approx 7.5 mtr height from natural ground level.
-
-
-
... More
(v) The unit rate quoted for item is deemed to include for Removing of accumulated earth of any width and depth upto 15 cm cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 3 m from plinth protection to outside MD land.
-
-
-
... More
(vi) Adoption of necessary safety arrangement like safety belts, ropes, helmets, netting etc. which are required for safety of working labour at height exceeding 3 to 25 mtr height shall be mandatary and deemed to be included in the unit rate quoted.
-
-
-
... More
M&L providing PCC 1:2:4 type B1 using 20mm graded stone aggregates as in roof or in any position to bring upto the slope of average thickness of 50 mm including demolition of existing concreter complete all as specified and directed.
100
-
-
... More
S & F Bib Cock with wall flange screwed down screwed for iron pipe 15mm bore including taking existing one complete as directed by Engr-in-charge.
Make:- CAT Part No Qt F2006152 HT F3001152 of CERA or equivalent to Parryware/Hindware/Jaguar
10
-
-
... More
S & F Angular stop cock, valves high pressure screwed both ends iron pipe or for unioins 15mm dia, including taking down existing one complete as directed by Engr-in-charge.
Make:- CAT Part No QT F2006201 HT F3001201 of CERA or equivalent to Hindware/Jaguar
10
-
-
... More
Taking down cement plaster on brick or stone walls, or concrete or ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed.
250
-
-
... More
M & L rendering 15 mm thick in two layers on brick or concrete wall surfaces,first coat 10mm thick in cement mortar 1:4 and 2nd coat 5mm thick in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
150
-
-
... More
M & L rendering 15 mm thick in two layers on brick or concrete wall surfaces, first coat 10 mm thick in CM 1:6 and 2nd coat 5 mm thick in CM 1:6 finished other than fair face without using extra cement complete all as specified and directed.
150
-
-
... More
M&L Preparation of new plastered surfaces wall and applying two coat of white wasing on walls surfaces complete all as specified and directed.
150
-
-
... More
M&L Preparation of new plastered surfaces wall applying two coat of OBD over a coat of alkali resistant priming paint complete all as specified and directed.
150
-
-
... More
M&L Rendering 15 mm thick in two layers on brick or stone or concrete surfaces,first coat 10mm thick in cement mortar 1:4 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement including taking down existing complete all as specified and as directed.
Note : Water proofing compound shall be measured and paid separately.
100
-
-
... More
Supply Only integral water proofing compound complete all as specified and as directed.
36
-
-
... More
Demolition of brick work masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and as directed.
9
-
-
... More
M & L brickwork with fly ash’ bricks using with modular bricks, straight or curved on plan exc 6m mean radius built in cm 1:4 , complete all as specified and as directed.
4
-
-
... More
Description all as per item No 87 here in above but except bricks. Note:Serviceable bricks obtained from Sl item No 86 be reused.
2
-
-
... More
M & L for Brickwork with fly ash brick, straight or curved on plan to any radius in half brick thick walls, buil in CM 1:4 complete all as specified and as directed.
36
-
-
... More
M&L Preparation of new plastered surfaces of walls, Chajja, balcony, facia etc. by brooming down or steel wire brushing scrapping down, smoke shoots moulds, mass efforescent salt, treating oil and greasy spots etc and applying two coats of cement based paint complete all as specified and directed.
130
-
-
... More
Demolition of cement concrete (reinforced) in of any description and in any position and removal of debris out of MD land complete all as specified and directed.
2
-
-
... More
M&L Reinforced precast cement concrete in 1:2:4 type B0 (using12.5mm graded stone aggregate) in Jallies, 45mm thick (measured solid) including all moulding but excluding frame set in CM 1:6 including dismantling existing damaged one complete all as specified and as directed.
20
-
-
... More
M&L Precast RCC 1:2:4, Type B–1 using 20mm graded stone aggregate as in landings, cover slabs, chullah hoods, Chajjas, water troughs, mangers, Shelves and similar articles with plain faces including formwork, set in cement mortar 1:4 complete all as specified and as directed.
2
-
-
... More
M&L High strength corrosion resistant TMTsteel bar of grade Fe-500 , 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
420
-
-
... More
M&L Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistren and flushpipe) and including seat cover for pedestal pattern complete fixed including taking down existing damaged one complete as specified and as directed.
10
-
-
... More
M&L Vitreous china squatting pan 'Orissa' Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe ) including provision of lime concrete bedding fixed including taking down existing damaged one complete all as specified and as directed.
10
-
-
... More
M&L PVC (SWR) 110mm bore P Trap including taking down existing one complete all as specified and as directed.
10
-
-
... More
M&L PVC (SWR) 110mm bore S Trap including taking down existing one complete all as specified and as directed.
10
-
-
... More
M & L Renewing glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed.
60
-
-
... More
Note for Item No 99 :-
The rate included for cutting out broken tiles, removing and cleaning loose tiles, preparing bed removing rubbish, brooming and replacing old with new tiles to match, complete with all cuttings etc, that may be required. New tiles required is deemed to be included in the unit rate quoted. The unit rate is also including necessary bedding in cement mortor in CM(1:4) not exceeding 15mm thick.
-
-
-
... More
S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
300
-
-
... More
M&L Preparation of new steel surfaces over 10 cm girth and applying two coats of synthetic enamel paint including one coat of red oxide primer
20
-
-
... More
Note for item No 102 :-
(a) All synthetic enamel paint shall be of 1st quality manufactured by the standard firms of make as specified.
-
-
-
... More
(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.
-
-
-
... More
(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE.
-
-
-
... More
(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite)
-
-
-
... More
(e ) Unless otherwise specified the tints of paint shall be as approved by the GE
-
-
-
... More
(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.
-
-
-
... More
(g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge.
-
-
-
... More
(h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.
-
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
3
-
-
... More
M&L preparation of plastered or un plastered old surfaces of walls, Chajja, balcony, facia etc. by brooming down or steel wire brushing scrapping down, smoke shoots moulds, mass efforescent salt, treating oil and greasy spots etc and applying one coat of cement based paint complete all as specified and directed.
1000
-
-
... More
M&L complete removal of existing plastering old surface in walls, Chajja, balcony, facia etc. by brooming down or steel wire brushing scrapping down, smoke shoots moulds, mass efforescent salt, treating oil and greasy spots etc and applying two coat of cement based paint complete all as specified and directed.
500
-
-
... More
M & L preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying one coat of exterior emulsion weater proof paint complete all as specified and as directed.
1500
-
-
... More
M&L in repairs Doom grating 125mm dia with waste hole of PTMT(minimum weight 40gms) Including taking down existing one complete all as specified and as directed by Engneer-in-Charge.
60
-
-
... More
S&F for in repairs 10 litre capacity PVC flushing cistern low level white colour with inlet ball valve float and handle incl brackets complete all as specified and directed.
18
-
-
... More
S & F Aluminium powder coated of three track sliding window outer frame top & sides (section no-20831) of size 92.0x31.75x1.5mm weighing 1.06 Kg/m, frame bottom (Section No 20832) of size 92.0x31.75x1.5mm weighing 1.248Kg/m , shutter to plain vertical (Section No 21093) of size 39x18x1.5mm weighing 0.634 Kg/m, shutter interlock vertical frame (section 21094) of size 39x18x1.55 weighing 0.734 Kg/m, shutter bottom horizontal frame (Section No 20551) size 40x20x1.5mm weighing 0.484 Kg/m, with powder coating of min thickness 50 micron , sliding type with out sash bars, 4mm thickness colour glass, rubber packing, snap beading screws with stainless steel wire mesh, including taken existing window with chowkats of any size, completet all as specified
Note: Minimum thickness of powder coating 50 micron.
14
-
-
... More
Supply and fixing in repairs factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. and provided with Clear Glass of Saint Gobain / Modiguard make with thickness of 4mm and stainless steel wire cloth of 0.19mm nominal dia. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
28
-
-
... More
M&L False ceiling using GI snap grid size 60x60cm with main runner 38x24,wall angle & cross tee 29x24mm wall angle 24x24mm suspended with 4mm dia GI Wire fixed with steel dash fasteners carrying max load upto 8.1 Kg/Sqcm with 4mm thick designer ceiling board Including taking down existing one complete all as specified and as directed by Engineer-in-Charge.
80
-
-
... More
S & F in repairs 18/19mm thick both side Prelaminated particle board, interior grade, with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.
50
-
-
... More
M & L for Second class hard-wood in scantlings timber framed and fixed clean sawn including taking down existing one complete all as specified and directed.
0.2
-
-
... More
M & L for second class hard wood Plain fillets square, rectangular or triangular in section exc 3sqcm and not exc 6sqcm, clean sawn, secured with nails or brads including taking down existing one complete all as specified and directed.
50
-
-
... More
M & L for second class hard wood Plain fillets bullnosed, splayed, chamfered or rounded on one edge or face, not exc 3sqcm, clean sawn, secured with nails or brads including taking down existing one complete all as specified and directed.
50
-
-
... More
M & L preperation of new wooden surfaces of any description, width or girth exc 10 cm and applying two or more coats of french polishing over a coat of wood filler on new works complete all as specified and directed.
50
-
-
... More
M&L Vitrified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertcal surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including backing coat of 15 mm thick in Cement Mortar 1:6 complete including dismantling of existing tile and disposal of to outside MD land all as specified and as directed.
25
-
-
... More
M&L Vitrified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 15 mm thick in Cement Mortar 1:6 complete including dismantling of existing tile and disposal off to outside MD land all as specified and as directed.
200
-
-
... More
Note for item No 125 & 126 :- (i) Vitrified tiles are classified under group B1a of the international Standard for ceramic tiles ISO: 13006. Tiles shall be hard, dense, impervious and frost resistant. Water absorption of tiles shall be less than 0.5% and flexural strength (Modulus of Rupture) shall be more than 35 N/Sqmm.
-
-
-
... More
(ii) The manufacturer's test certificate and individual test certificate of Tiles must be submitted for approval by the concerned authority prior to installation.
-
-
-
... More
M&L Glazed ceramic coloured tiles 450 x 300 mm x 7/8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as dado including 10mm thick 1:3 backing coat including taking down existing tile and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
100
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and Joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size exc 0.09 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as directed.
100
-
-
... More
Note for item No 129 & 130 :- The manufacturer's test certificate of Tiles must be submitted for approval by the concerned authority prior to installation.
-
-
-
... More
M&L in repairs Granite work (of any type) 18 to 20mm thick (table rubbed and polished including round edge) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
S &F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as sepcified and directed.
120
-
-
... More
M&L 25mm dia mild steel powder coated drapery rod out to length required without joint in between and fixed at openings including taking existing one complete as directed by Engr-in-charge.
200
-
-
... More
M&L Mild steel powder coated brackets for holding the drapory rod and fixed to wall with MS screw including taking down existing one complete as directed by Engr-in-charge.
110
-
-
... More
Supply and Fixing in repairs Mild steel powder coated fancy type brackets fixed at both the end of drapery rod of same colour and type of drapaery rod as directed.
150
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane complete all as specified and directed.
24
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass exc 0.5 sqm each pane complete all as specified and directed.
6
-
-
... More
M&L Checking of floor, plinth, plaster etc requiring masonry work and carrying out minor repairs such as edges, patches etc, including petty repairs material like sand, cement & aggregate to make it functional complete all as specified and as directed by Engineer-in-Charge. The rates for plastering / plinth include for: (a) Preparing the surfaces.
(b) Thickness of plaster/plinth key in joints, etc. (c) Anises, chamfers of any width, internal rounded angles upto 80mm in width or girth external rounded angles upto 80mm in width or girth.
(d) All materials, labour and equipment & supply of integral waterproofing compound, (e) Scoring surface of plastering for key, where the surface is not required to be finished fair.
(f) Plastering in patches (in repairs), exc 3 sq.m each patch, for preparing old walls to receive plastering'. Nothing extra shall be admissible for matching with existing work etc. (g) Any individual patch (other than nail hole, plug hole, etc.) are included for provided existing surface finish .
20
-
-
... More
M&L Hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface including removal of existing complete all as specified and directed.
22
-
-
... More
M & L Bullnosed chequered cement concrete tiles 32cm x 20cm x 30mm thick machine pressed set jointed and pointed in neat cement slurry as in treads and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor fnishes in cement mortar (1:4) including taking down existing tiles complete all as specified and as directed by Engineer-in Charge.
200
-
-
... More
M & L Chequered cement concrete tiles 30cmx30cmx25mm thick machine pressed set jointed and pointed in neat cement slurry on vertical surfaces as in skirting, dados and risers of steps and cut and polished using grey cement and pigments over backing coat of mortar 10mm thick for laying floor fnishes in cement mortar (1:3) including taking down existing tiles complete all as specified and as directed by Engineer-in Charge.
50
-
-
... More
M&L Chequered cement concrete tiles 30cmx30cmx25mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) including demolishing the existing tile complete all as specified and directed
120
-
-
... More
Note for item No 141 to 143 :- The manufacturer's test certificate of Tiles must be submitted for approval by the concerned authority prior to installation.
-
-
-
... More
M&L 75mm thick, plain cement concrete (1:3:6), type C-2 (using 40 mm graded mechanically crushed stone aggregates), as in plinth protection/path/hardstanding including making joints @ 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement including demolition of existing damagd cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness and rubish material shall be disposal to out side MD land complete all as specified and as directed..
100
-
-
... More
Note for Item No 145 :- The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.
-
-
-
... More
S&F in repair CP sink cock with swinging casted round shape spout screwed down screwed for iro pipe in repairs 15mm bore170mm long swivel spout and wall flange (Make : CAT part No QT F2006251 HT F3001251 of CERA or equivalent in make specified in PS
15
-
-
... More
S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete
15
-
-
... More
S & F in repairs 600mmx450mm bevelled edge mirror ofselected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
24
-
-
... More
S& F in repairs PVC body cabinet mirror of size 500 X 400 mm of approved design and pattern including taking down existing one complete all as specified and as directed by Engineer-in-Charge . Make: Cat Part No 556 of Prayag or its equivelent in make specified in PS
12
-
-
... More
S&F in repair CP Soap dish all as specified and as directed. Make:- CAT Part No- F5003106 of CERA or equivalent in make specified in PS
30
-
-
... More
S&F in repair Towel rail 24" long for wash basin complete all as specified and as directed.
(Make : CAT Part No-F5007103 of CERA series or or equivalent in make specified in PS
15
-
-
... More
S & F in repairs 100 mm brass mortice lock vertical 4 lever complete all as specified and directed.
10
-
-
... More
M&L 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall incuding taking down existing complete all as specified and as directed.
150
-
-
... More
M&L PVC bends 110mm bore including taking down existing one complete all as specified and as directed.
15
-
-
... More
M&L PVC (SWR) 110mm junction (single T) equal or unequal provided with access door including taking down existing one complete all as specified and as directed.
6
-
-
... More
M&L PVC (SWR) 110mm junction vent cowl all as specifed including taking down existing one complete all as specified and as directed.
6
-
-
... More
M&L in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 110 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore complete all as specified and directed.
36
-
-
... More
S & F in repairs 150mm dia of half round ready made PVC (SWR) eaves gutter of pressure rating 6 kg/cm2 of approved make including necessary fitting like bend WC/MS clips etc complete all as specified and directed.
120
-
-
... More
S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall incuding taking down existing PVC Rain Water Pipes (any size) along with all fittings heads bends etc complete all as specified and as directed.
160
-
-
... More
S & F in repairs PVC (SWR) bends any radius 75 mm dia fixed to wall complete all as specified and as directed.
15
-
-
... More
S & F in repairs PVC (SWR) 75mm bore junction (single T) equal or unequal provided with access door complete all as specified and as directed.
14
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements