Military Engineer Services Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date22 Jun 2024
Closing Date11 Jul 2024
Tender Amount₹ 49,50,000
Costs
EMD
₹ 99,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Repair / Maint To Barbed Wire Fencing, Chain Link Fencing, Gates, Gate Pillars, Pcc Coping, Jaffari Wall And Other Misc B/r Works
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_661570_1Bid Award Id
ViewTender No
8667/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
S&F Welded steel wire fabric cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members not excceding 4Kg/Sqm complete all as specified and directed..
555
-
-
M&L Stainless steel (Grade 304) hollow round or square pipe of any dia/ size fixed as in posts/ railing with knock-down fixing system & top mounted round balaster made of 38 to 50mm dia stailness steel 304 grade, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size suitable arrangement as per approval of Engineer-in-charge for any height including taking down old railing and make good the surfaces complete all as specified and as directed.
87
-
-
Note for Item No 5 :- The distance between vertical stainless steel posts should be as per existing/site requirement.
-
-
-
Taking down and refixing the same steel gate not exc 3 sqm each pane after repair of rusted or damaged portion of the gate including pivate,holdfast,stoper,locking arrangement,pintal etc and necessary greasing to pivate with or including spot welding,running welding complete all as specified and as directed
9
-
-
Taking down and refixing the same steel gate exc 3 sqm but n exc 5.00 sqm each pane after repair of rusted or damaged portion of the gate including pivate,holdfast,stoper,locking arrangement,pintal etc and necessary greasing to pivate with or including spot welding,running welding complete all as specified and as directed
4
-
-
Removing the existing sand from the firing butt and refilling in the same area after seiving the sand with out any fired bullet scrap, pebbles etc, complete all as specified and directed.
95
-
-
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and as directed.
35
-
-
M&L Plain Cement Concrete, type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in foundation of fencing post, filling and mass concrete complete all as specified and as directed.
5.67
-
-
Dismantling posts and struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground complete all as specified and directed.
200
-
-
M&L Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 including dismantling posts or struts (wood, steel or RCC) any section, complete all as specified and as directed.
1700
-
-
Dismantling of existing damaged fencing wire mesh of any type and any size complete all as specified and as directed.
500
-
-
Supply only Chain link mesh, made of 3mm dia galvanised wire, confirming to IS 2712.2003 and having zinc coating, heavy type,as laid down in IS 4826 including line wires/ binding wire etc fixed to any type of standards posts complete all as specified and as directed.
1200
-
-
Straining and fixing only chain link fencing including line wires, any mesh size and type of to any type of standards, rails, straining bolts etc including provision 10mm dia MS bars as line wire welded to fencing posts and MS flat iron for fixing fencing wire mesh complete all as specified and as directed.
500
-
-
Note for item 16:- 10mm dia round bars shall be measured and paid vide relevent item. However, labour aspect for fixing is deemed to be included in this item.
-
-
-
Supply only 10mm dia round bars, cut to length ,hooking ends as in wooven/ straining bar (stiches through chain link fencing between post) complete all as specified and as directed.
100
-
-
Supply & lay river sand (M sand prohibited) filling in firing butt of height average 3.2m including necesaary watering complete all as specified and directed.
60
-
-
Supply only saw dust and mixing with sand in proportion as directed including filling in the firing butt complete all as specified and directed.
60
-
-
M & L polyethene bag of 50 Kg capacity and river sand filling (M sand prohibited) in bag after screening, striching the bag with hand machine and stacked/placed upto 1.5m heightcomplete all as specified and directed.
820
-
-
M&L Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc includig dismantling of existing damaged fencing complete all as specified and as directed (Note: Each line of wire to be measured).
9
-
-
S & F 2 mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors including taking down existing one complete all as specified and directed.
15
-
-
S&F 12mm thick toughened glass for doors including polished by machine on edges including stainless steel clips/hinges, stainless handles (02 Nos), floor spring double action including taking down existing glass complete all as specified and as directed by Engr-in-Charge
7.5
-
-
M&L Cleaning of existing cover drain / open drain of any width and depth upto 15 cm by using jet water pressure mechanical pump,suction pump and removing mud/silt, vegetation growth, plants/small trees etc to a distance 50m , including repairing cracks in cement mortar (1:3) where noticed in surface of drain all as specified and as directed.
750
-
-
Note for item No 25 :- (a) The work to be executed in highly restricted area.
-
-
-
(b) The unit rate is deemed to be included for removing of accumulated earth of any width and depth upto 15 cm cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 1m from both side of the drain to outside MD land Note: Periodicity of cutting of grass shall be before commencement of work and after completion of repairs.
-
-
-
(c) The unit rate deemed to be considered for First Aid and necessary safety arrangements equipment’s to be provided by the tenderer for workman.
-
-
-
(d) The tenderer shall adhere to time frame as per the user’s requirement and as per demand. The demand and the location of work will be intimated either by the rep of user/ MES rep well in advance. In case of failure to attend the demand in time penalty will be levied for each day @ Rs 500/ for non-completing the requirement till completion of work. The nature of the work related to Airfield maintenance, hence the delay is not acceptable.
-
-
-
S&F in repairs rolled Mild Steel work including cleats, brackets, etc.,and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
550
-
-
M & L two coats of painting on steel and iron surfaces over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.
135
-
-
Note for item 31:-
(a) Synthetic enamel paint shall be of 1st quality manufactured by the standard firms of make as specified.
-
-
-
(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.
-
-
-
(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint will be approved by the GE.
-
-
-
(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite)
-
-
-
(e) Unless otherwise specified the tints of paint shall be as approved by the GE
-
-
-
(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.
-
-
-
(g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge.
-
-
-
(h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.
-
-
-
M&L complete removal and preparation of old steel surface of Watch Towers of height 10 to 15 mtr of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed
900
-
-
Note for item 40:-
(a) All synthetic enamel paint, shall be of 1st quality manufactured by the standard firms of make as specified.
-
-
-
(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.
-
-
-
(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint will be approved by the GE.
-
-
-
(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite)
-
-
-
(e) Unless otherwise specified the tints of paint shall be as approved by the GE
-
-
-
(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.
-
-
-
(g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge.
-
-
-
(h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.
-
-
-
(j) The above item No 40 shall be executed on watch tower for repair/ maint, which are scattered in a periphery of 4-5 KM distance and height of watch tower is upto 15 mtr.
-
-
-
(k) Due to security reason towers will be handed over for repair/ maint work in phase manner. No compensation or extra claim shall be admissible due to loss of manhours.
-
-
-
(l) The unit rate quoted for this item is deemed to include for removing of accumulated earth of any width and depth upto 15 cm lying around approaches, cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine around 3 m from plinth protection and removing the grass waste to outside MD land.
-
-
-
(m) Necessary boom lift/ scaffolding required for working upto 15 mtr height from natural ground level will be arranged by the contractor and cost for the same shall deem to be included in the unit quoted rate.
-
-
-
(n) Necessary safety arrangement like safety belts,ropes,helmets, netting etc. which are required for safety of working labour at height exceeding 3 to 15 mtr height shall be mandatary and deemed to be inclusive in unit quoted rate quoted.
-
-
-
M&L Rotational moulded polythene water storage tank of 1000 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed.
10
-
-
M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment. (Fe 410 -W (Gde- E-250) quality -A including dismantling of existing one complete all as specified and as directed.
120
-
-
M&L Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane complete all as specified and directed.
15
-
-
M&L Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass exc 0.5 sqm each pane complete all as specified and directed.
10
-
-
M&L Reinforced precast cement concrete in 1:2:4 type B0 (using12.5mm graded stone aggregate) in Jallies, 40mm thick (measured solid) including all moulding but excluding frame set in CM 1:6 including taking down existing damaged one complete all as specified and as directed.
135
-
-
Demolition of brick work masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed.
25
-
-
M&L Fly ash Brick work using modular bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 complete all as specified and directed.
25
-
-
M&L Rendering 15 mm thick in two layers on brick or stone or concrete surfaces,first coat 10mm thick in cement mortar 1:4 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.
210
-
-
Note for item No 61 :- Water proofing compound shall be measured and paid seperately.
-
-
-
M&L 100mm thick, Plain Cement Concrete (1:3:6), type C-2 (using 40 mm graded stone aggregates), as in hardstanding including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, including demolition of existing concrete and removal of debris to outside MD land to a distance exc 1.5 km but not exceeding 5.0 km complete all as specified and as directed.
110
-
-
Note for item No 63 :- The concrete shall be laid in alternate bays at a stretch not exceeding 3 metre in length in each bay and width of joint shall not be more than 12 mm.
-
-
-
M & L preparation of plastered or un plastered old surfaces of wall chajja, blacony,facia etc. by brooming down or steel wire brushing scrapping down, smoke shoots moulds, mass efforescent salt, treating oil and greasy spots ect and applying one coat of white wash on old surfaces complete all as specified and directed.
6500
-
-
Note for item No 65 -: (i) The lime shall be slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use
-
-
-
(ii) Application of Whitewash:-
Whitewash shall be applied with ‘MOONJ’ brush or other brush to the specified number of coats. The operation for each coat shall consist of a stroke of the brush given from the top downwards, another from the bottom upwards over the first stroke and similarly one stroke horizontally from the right and another from the left before it dries. Each coat shall be allowed to dry before the next coat is applied. No portion of the surface shall be left out initially to be patched up later on. The brush shall be dipped in whitewash, pressed lightly against the wall of the container and then applied by lightly pressing against the surface with full swing of hand
-
-
-
(iii)Whitewashing on ceiling should be done prior to that on walls.
-
-
-
M & L preparation of plastered or un plastered old surfaces of walls, Chajja, balcony, facia etc. by brooming down or steel wire brushing scrapping down, smoke shoots moulds, mass efforescent salt, treating oil and greasy spots ect and applying one coat of cement based paint including preparation of old surface of wall complete all as specified and directed.
450
-
-
Note for Item No 69:-
(i)Before applying cement based paint ,the surface shall be thouroughly wetted to control surface suction. The surface shall be moist but not dripping wet when the paint applied .Surfaces which readily absorb moisture shall be wetted in one operation not more than one hour before painting.Surfaces which absorb moisture slowly shall be wtted in at least two operations not less than 30 minutes apart.
-
-
-
(ii)To maintain a uniform mixture and to prevent segregation ,the paint shall be stirred frequently in the bucket.
-
-
-
(iii)Painting surfaces shall be cured as soon as paint has hardened so as not be to damaged by the spray about 12 hours after the applications.
-
-
-
(iv) Cost of scaffolding required deemed to be included in the quoted rate of item and nothing extra shall be admissible on this account.
-
-
-
(v)Paints shall be obtained direct from approved manufacturer or from their authorized agents only and brought to site in sealed containers. The paint so procured shall be of any approved make as per list of makes specified.
-
-
-
Taking down carefully any type of steel rolling shutters, of size exc. 5 Sqm but n. exc. 15 Sqm each , inspecting/notifying the defective springs, bearings, shaft, side guides, Gear box, Gear box, etc including greasing and replacement of unserviceable/ defective parts and re fixing in the same and releasing the tension in the springs, lowering complete all as specified and directed by Engineer - in - Charge
15
-
-
M&L 100 mm thick Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate ) as in sub base , filling and mass concrete or as in receiving tiles/ surface channels and drains etc including demolition of existing cocrete complete all as specified and directed.
480
-
-
M&L Chequered cement concrete tiles 30cmx30cmx25mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) including demolition of existing tile complete all as specified and directed.
100
-
-
Note for item No 77 :-
The manufacturer's test certificate for tiles must be submitted for approval by the concerned authority prior to installation/fixing. .
-
-
-
S & F SS Sign board pattern (SS to SS-7), fully retro reflective sign board made of 3mm thick ACP (Aluminum composit panel) sheet framed with 40mm round SS pipe having front/back (both) side entire surface fully bonded with retro reflective sheeting of HIP (High Intensive Prismatic) grade having pressure sensitive adhisive. boarders and message as indicated cut out. Back ground in Blue and matter in white colour tape having two posts of 50mm round SS pipe 3.0mtr long including excavating post holes of 30 x 30 x 30 cm and embedded in PCC 1:3:6 and including taking down and removing rubbish material to outside MD land complete and as directed by Engineer-in-charge
14
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and Material and labour for new Glazed ceramic coloured tiles 450 x 300 mm x 7/8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as dado including 10mm thick, cement mortar( 1:3) backing coat complete all as specified and directed.
85
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises and Joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size exc 0.09 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as directed.
75
-
-
Note for item No 80 & 81 :- The manufacturer's test certificate and individual test certificate of Tiles must be submitted for approval by the concerned authority prior to installation.
-
-
-
M&L preparation of newly plastered wall surfaces and applying two coats of Exterior emulsion anti fungal paint over a coat of primer complete all as specified and as directed.
250
-
-
Note for item 83:-
(a) Exterior emulsion anti fungal paint, shall be of 1st quality manufactured by the standard firms of make as specified.
-
-
-
(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.
-
-
-
(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint will be approved by the GE.
-
-
-
(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified.
-
-
-
(e) Unless otherwise specified the tints of paint shall be as approved by the GE
-
-
-
(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.
-
-
-
(g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge.
-
-
-
(h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.
-
-
-
S&F in repair powder coated aluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete all as specified and as directed.
8.5
-
-
M & L Complete removal of existing water proofing treatment and expose of top surface of RCC slabof any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with water and using wire brush including removing debris to out side the MoD land and providing waterproofing treatment as following :-
50
-
-
(a) Dismantling existing cement concrete/roof tiles on roof including removing debris to out side MD land as directed.
-
-
-
(b) Bring upto the slope by providing filling of light weight materials sch as cinder, light weight concrete etc as required, and then providing PCC 1:2:4 type B1 of average thickness of 50mm.
-
-
-
(c) Rendering 10mm thick in CM 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 3% by weight of cement.
-
-
-
(d) Apply a coat of bituminous primer confirming to IS-3384@ 0.5 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried.
-
-
-
(e) Providing APP modified water proofing as approved by GE weighing not less than 4kg per sqm unrolled over the bituminous coated surgace with 100mm over laps, the overlap shall be sealed by flame as per manufacture instructions complete.
-
-
-
(f) Over the APP membrane, apply evenly a tack coat of hot air blown bitumen of grade 85/25 at the rate of 1.20 kg per sqm including cleaning of surface.
-
-
-
(g) Applying a coat of aluminium paint at the rate of 100 gm per sqm as per manufacture instruuction over bituminous layer complete all as directed.
-
-
-
(h) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface.
-
-
-
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed to existing members including taking down existing one complete all as specified and as directed by Engineer-in-Charge.
20
-
-
M&L Hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
48
-
-
Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.
30
-
-
M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 80mm thickness M-40 grade, complete all as specified and directed.
100
-
-
Note for item No 105 :- The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar and removing of debris outside of MD land
-
-
-
M & L treating the soil along with external perimeter of building using anti termite treatment emulsion @ 2.25 litre of emulsion per metre of the perimeter wall including drilling and plugging holes etc. in apron complete all as specified and directed.
175
-
-
S&F Pre painted Coloured Galvalume roofing system sheet 0.50 mm thick having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws including dismantling of existing roof sheet complete all as specified and as directed by Engr-in-charge.
325
-
-
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of existing roof sheetas specified
25
-
-
Note for Pre-painted coloured Galvalume roofing :-
-
-
-
(i) The manufacturer's test certificate and individual test certificate for the chemical and mechanical properties of sheet must be submitted for approval by the concerned authority prior to installation.
-
-
-
(ii) The contractor shall ensured that no leakages take place from the roof. The roofing shall be Coloured Galvalume roofing system (olive green colour or as approved by GE) with feed material manufactured from 0.50 mm Total coated thickness (TCT), minimum 550 MPa yield strength and shall conform to the physical specifications of IS: 2062 of 2011, coated with hot dip metallic Aluminium / Zinc alloy coating AZ150 as 150 gm/sq.mt total on both sides.
-
-
-
(iii) The painting shall be coloured baked enamel polyester with silicon coating of film thickness 25 microns nominal on the exposed face/exterior side and on the reverse side ( interior face) shall be white with 15 microns film thickness, over a coat of 5 micron nominal thickness Primer.
-
-
-
(iv) The contractor shall produce purchase vouchers for each lot for verification of Engineer-in-Charge.
-
-
-
M&L 75mm thick, Plain Cement Concrete (1:4:8), type D-2 (using 40 mm graded stone aggregates), as in hardstanding including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, including demolition of existing concrete and removal of debris to outside MD land to a distance exc 1.5 km but not exceeding 5.0 km complete all as specified and as directed.
55
-
-
Note for item No 115 :- The concrete shall be laid in alternate bays at a stretch not exceeding 3 metre in length in each bay and width of joint shall not be more than 12 mm.
-
-
-
M&L Taking down cement plaster on brick or stone walls, or concrete or ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and material and labour for Rendering 15 mm thick in two layers on brick or stone or concrete surfaces,first coat 10mm thick in cement mortar 1:4 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.
90
-
-
Note for Item No 117 :-
WPC shall be measured and paid seperately under supply only item, Whereas, the labour cost for mixing the WPC with cement mortar as per manufacturer's instruction shall be deemed to be included in the quoted rate
-
-
-
supply only integral water proofing compound complete all as specified and directed.
45
-
-
M&L preparation of newly plastered surfaces wall and applying three coats of white washing on walls surfaces complete all as specified and directed.
50
-
-
M&L applying two coat of cement based paint over a coat of primer, including preparation of newly plastered wall surfaces of any description, complete all as specified and as directed.
40
-
-
M&L in repairs for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 60mm thickness M-35 grade, complete all as specified and directed.
135
-
-
Note for Item No 122 :- The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar and removing of debris outside of MD land
-
-
-
M & L preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying one coat of exterior emulsion weater proof paint complete all as specified and as directed.
950
-
-
Note for item No 124:-
(a) The Exterior emulsion paint shall be of 1st quality manufactured by the standard firms of make as specified.
-
-
-
(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.
-
-
-
(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE.
-
-
-
(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands and brought to site in sealed containers. The paint so procured shall be of first quality
-
-
-
(e ) Unless otherwise specified the tints of paint shall be as approved by the GE
-
-
-
(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.
-
-
-
(g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge.
-
-
-
(h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.
-
-
-
M & L for sand cushioning including speading in layers and rolled consolidated to thickness 50mm for receiving precast PCC interlocking blocks complete all as specified and directed.
12
-
-
Repair to door by supply and fixing lock/ middle rail of size 200mm wide of second class hard wood 35mm thick including making of grooves and fixing new middle rail by replacing defecting rail using fevicol and wooden pinning complete all as specified and directed.
8
-
-
Repair to door by supply and fixing stiles/ top and freeze rails of size 100mm wide of second class hard wood 35mm thick including making of grooves and fixing new top rail by replacing defecting rail using fevicol and wooden pinning complete all as specified and directed.
8
-
-
S&F stainless steel letters 12 inch height made out of 1 mm thick stainless steel plate, cut folded, welded to required shape including fixing on the granite with bolt nuts etc all as directed by Engineer -in-Charge./steel surface complete all as specified and directed.
9
-
-
S&F stainless steel 1mm thick sheet logo of Airforce exceeding 0.15 Sqm but not exceeding 0.34 Sqm including necessary fitting complete all as specified and directed.
2
-
-
M&L Granite 18 to 20mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as specified and directed.
20
-
-
Note for Item No 138 :- The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors
-
-
-
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 110 mm bore fixed to wall including taking down existing one complete all as specified and as directed by Engineer-in-Charge
25
-
-
S&F in repair Stack clamps made out of 50 mm x 5 mm flat iron and 75 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and directed.
8
-
-
S&F in repair Stack clamps made out of 50 mm x 5 mm flat iron and 110 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore complete all as specified and directed.
13
-
-
S&F in repair stainless steel letters 8 inch height made out of 1 mm thick stainless steel plate, cut folded, welded to required shape including fixing on the granite with bolt nuts etc all as directed by Engineer -in-Charge./steel surface complete all as specified and directed.
13
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements