Military Engineer Services Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date10 Jul 2024
Closing Date4 Sep 2024
Tender Amount₹ 39,50,000
Costs
EMD
₹ 79,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_665125_1Tender No
8910/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
COMPREHENSIVE MAINTENANCE INCLUDING REPAIRS TO JOINERY, WALL FLOORING AND PERIODICAL SERVICES INCLUDING INTERNAL WIRING, REPAIRS AND CLEANING OF SEPTIC TANK, SOAKAGE WELL SEWAGE LINES, MAN HOLES, REPAIRS FENCING COMPOUND WALL ETC AND REPAIRS/ REPLACEMENT
BOQ Items
Preparation of old treated surface of any description over 10 cm girth or width not other wise described and applying one coat of cement base paint on wall surfaces complete all as specified and directed .
1500
-
-
Applying one coat of wall care putty to cover old uneven plastered surfaces in wall/ceiling upto 2mm to cover undulations and finished even and smooth using emery paper all as specified and directed .
100
-
-
Applying one coat of oil bound distemper on old decorated plastered surfaces of walls including preparation of surfcaes and filling holes and undulations with wall putty all as specified and directed.
3000
-
-
Taking down cement or cement lime plaster on brick walls incl racking out joints hacking for key scrubbing down with water etc all as specified and directed.
80
-
-
Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified.
130
-
-
Rendering 10mm thick in cement mortar 1:3 on concrete surfaces of ceiling finished even and smooth (without using extra cement) complete all as specified
20
-
-
Preparation of newly plastered surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new surfaces complete all as specified and directed.
20
-
-
Preparation of new plastered wall surface and applying two coat of cement base paint over a alkali resitant primer on wall surfaces complete all as specified and directed .
10
-
-
Applying three coats of whitewash in ceiling on newly palstered surfaces all as specified and directed.
20
-
-
Applying three coats of whitewash on newly plastered wall surfaces all as specified and directed.
10
-
-
Preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a priming coat using chalk whiting, complete all as specified and directed.
20
-
-
Complete removal of existing treatment on walls and applying two coats of oil bound distemper on old plastered surface all as specified and directed.
200
-
-
Complete removal of existing treatment on walls and applying two coats of cement base paint on old plastered surface all as specified and directed.
200
-
-
Preparation of old painted wooden surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
350
-
-
Preparation of old painted steel surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
250
-
-
Hacking out old broken glass (any thickness, size, quality or description) from wooden/matel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.
40
-
-
Plain sheet glass 4mm thick, ordinary quality and glazing with oil putty/ wooden beading in squares not exceeding 0.50 Sqm in each pane all as specified and directed.
45
-
-
Figured glass, pin headed type, 3mm thick , and glazing with oil putty/ wooden beading in squares not exceeding 0.50 Sqm in each pane all as specified and directed.
10
-
-
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repairs all as specified and directed.
40
-
-
Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.
20
-
-
PVC valveless, syphonic action type flushing cistern, low level, 10 litres capacity, white, with inlet, ball, valve, float and handle including brackets fixed in repair all as specified and directed.
15
-
-
600 x 450mm bevelled edge mirror of selected quality glass 5.0/ 5.5mm thick mounted on standard PVC/ Aluminum frame all as specified and directed.
15
-
-
Stainless steel sinks with drainage board 1mm thick with plugs, washers and waste; incl bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm, bowl size 410 x 330 x 160mm, fixed to repairs all as specified and directed.
2
-
-
Sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including fixed in repairs all as specified and directed.
3
-
-
Chromium plated shower rose with or without swivel joint,100 to 125mm size, including fixing to steel pipe or union, fixed in repairs all as specified and directed.
20
-
-
Vitreous china wash basin, white, flat back, size 550 x 400mm including brackets and fixed in repairs all as specified and directed.
10
-
-
Vitreous China Wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) complete fixed in repairs all as specified and directed.
10
-
-
Dismantling water tanks capacity exceeding 250 ltrs and not exceeding 500 ltrs all as specified and directed.
10
-
-
Dismantling water tanks capacity exceeding 500 ltrs and not exceeding 1000 ltrs all as specified and directed.
5
-
-
Rotational moulded polyethylene water storage tanks, ISI marked Three layered (cylindrical vertical with closed top) hoisted and fixed in position, 500 ltrs capacity all as specified and directed.
10
-
-
Rotational moulded polyethylene water storage tank, ISI marked Three layered (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position all as specified and directed.
5
-
-
15mm dia bore bib taps of cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and directed.
40
-
-
Pillar taps, fancy type, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.
20
-
-
Stop/ angle valves, 15mm dia,fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.
10
-
-
Stop/angle valves, 15mm dia for shower rose, fancy type chromium plated cast copper alloy, with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.
10
-
-
20mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and directed.
4
-
-
32/40mm dia expandable type PTMT waste pipe for Wash hand basin/kitchen sink complete and fixed in repairs all as specified and diercted.
40
-
-
25mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and diercted.
4
-
-
PVC connections 15mm size with PTMT nuts of length 450mm all as specified and diercted.
40
-
-
Stainless steel plate rack of approved make, size not less than 36 x 36 inches and weight not less than 7.00 kgs each all as specified and diercted.
5
-
-
20mm dia 1.25mm thick stainless steel / Harrison rails, chromium plated including fixing with brackets, stops, rollers etc curtain rod complete all as specified and directed.
60
-
-
Tubular towel rail 20mm dia, brass chromium plated fancy type all as specified and directed.
10
-
-
15mm dia chromium plated cast copper alloy fancy type, two in one combination of bib tap and angle valve fixed in repairs all as specified and directed.
10
-
-
Taking up or down steel tubing and connections, bore of pipe 15 mm all as specified and directed.
60
-
-
15mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors all as specified and directed.
60
-
-
20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors all as specified and directed.
60
-
-
PVC lid/ cover for PVC OH tank of capacity 250/ 500/ 1000 ltrs suitable for syntex/ reno/ polycon etc all as specified and directed.
15
-
-
Syphonic set suitable for PVC flushing cistern 10 Ltrs capacity all as specified and directed.
10
-
-
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified and directed.
15
-
-
All as per item No. 52 above, but exceeding 1.5 Sqm and not exceeding 4 Sqm each all as specified and directed.
20
-
-
Taking down shutters exceeding 1 Sqm and not exeeding 2 Sqm each all as specified and directed.
15
-
-
Taking down shutters not exeeding 1 Sqm each all as specified and directed.
15
-
-
Pressed steel frames of size 165x60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc, complete all as specified and directed.
26
-
-
Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified size of 105 x 60mm all as specified and directed.
26
-
-
2nd class Hard wood 30 mm thick Glazed and skeleton shutters, open rebated prepared to receive glass/gauze etc. edges of framing, divided in to squres with plain chamfered or rounded, fitted with cut mitered beads for securing glass/ gauze all as specified and directed.
Note: Glazing and gauze will be measured separately
15
-
-
Second class HW plain, framed, panelled shutters 30mm thick (any No of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats all as specified and directed.
40
-
-
Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing.
75
-
-
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck in side with solvent cement all as specified and directed.
25
-
-
Steel windows with side hung shutters including projecting type hinges with steel handle and steel pegs stay complete with glazing bars dovetailed or welded with glazing bars all as specified and directed.
10
-
-
Steel windows with side hung shutters incl projecting type hinges with steel handle complete with out glazing bars dovetailed or welded as fly proof shutters all as specified and directed.
5
-
-
Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
5
-
-
Providing plain cement concrete 1:3:6 Type C0 (using 12.50 mm graded stone aggregate) as in filling hollow of pressed steel frame all as specified and directed.
1
-
-
PCC 1:2:4, type B1, using 20mm graded stone aggregate as in bed block for fixing hold fasts and benching /coping including necessary use and waste of form work complete all as specified and directed.
3
-
-
MS Butt hinges medium weight cold rolled 100mm long all as specified and directed.
90
-
-
Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21, with MS hinge pin 100 mm size all as specified and directed.
105
-
-
Aluminium anodized barrel tower bolt of extruded section 150 mm length all as specified and directed.
65
-
-
Extruded aluminium alloy handles fabricated type 150 mm size, anodized all as specified and directed.
65
-
-
300 mm long aluminium alloy, anodized sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section all as specified and directed.
35
-
-
Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm all as specified and directed.
35
-
-
Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long including fixed in repairs complete all as specified and directed.
5
-
-
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.
15
-
-
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel / wooden joinery all as specified and directed.
30
-
-
Ground or obscured or frosted sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane all as specified and directed.
12
-
-
Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers all as specified and directed.
5
-
-
Preparation of new wood surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.
80
-
-
Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
130
-
-
12 mm thick Prelaminated termite resistant water proofing plywood interior grade, Prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work , fixed in repairs all as specified and directed.
15
-
-
18 mm thick Prelaminated termite resistant water proofing plywood interior grade, Prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work , fixed in repairs all as specified and directed.
15
-
-
Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
10
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gaske etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions all as specified and directed.
15
-
-
4.8mm thk Sheet glass, ordinary quality and glazing with oil putty/ rubber beading in square but exceeding 0.5 sq. m in each pane all as specified and directed.
5
-
-
Aluminium (extruded section body) Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.
5
-
-
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.
2
-
-
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.
0.75
-
-
Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.
225
-
-
Sunken treatment with following specification completely, complete all as specified and as directed by Engineer-in-Charge :- (i) Applying evenly a tack coat of bitumen primer @ 1.2 kg/ sqm.
(ii) Laying APP modified membrane weighting not less than 3 to 4 kg/sqm in 100 mm over laps both longitudinally and transversally and overlaps to be sealed by torch, membrane shall be taken upto the thickness of slab/ front fascia.
10
-
-
Roof treatment with following specification completely, complete all as specified and as directed by Engineer-in-Charge :- (i) Applying evenly a tack coat of bitumen primer @ 1.2 kg/ sqm.
(ii) Laying APP modified membrane weighting not less than 3 to 4 kg/sqm in 100 mm over laps both longitudinally and transversally and overlaps to be sealed by torch, membrane shall be taken upto the thickness of slab/front fascia. (iii) Cleaning & preparing the surfaces and finally painted at the top with a coat of bituminous aluminium paint all as specified and as directed
25
-
-
Demolition of Concrete such as Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work compelte all as specified and as directed.
3.63
-
-
10mm thick cement plaster in cm (1:4) on top of roof slab/ sunken floor with WPC all as specified and as directed.
35
-
-
Supply only liquid water proofing compound all as specified and directed.
0.5
-
-
PCC 1:4:8 Type D2 40mm aggreagate as in sunken floor, foundations filling and mass concrete etc complete all as specified and directed.
5
-
-
25mm thick cement concrete type B1 1:2:4 20mm stone aggregate as in sub floor, sub bases, floors, roof and pavings etc complete all as specified.
10
-
-
Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.
40
-
-
Coloured Glazed ceramic tiles in vertical surfaces 450mm x 350 x 7mm / 350mm x 250mm x 7mm to 8mm thick as in dados, skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigments to match the surface, on including 10mm thick rendering in cement mortar 1:3 for fixing dado tiles complete all as specified and directed.
40
-
-
Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.
30
-
-
All as per above item 98 hereinbefore, but on vertical surfaces including 10mm thick cement mortar 1:4 as in baking coat of dado/ skirting all as specified and as directed.
3
-
-
Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) light grade polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement slurry to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.
10
-
-
All as per above item 100 hereinbefore, but on vertical surfaces including 10mm thick cement mortar 1:4 as in backing coat of dado/ skirting all as specified and as directed.
1
-
-
20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigmet to match with shade of granite all as specified and as directed.
2
-
-
20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed.
2
-
-
China urinal partition white of size 310 x 710 mm all as specified and as directed.
2
-
-
Brass chromium plated bottle trap 32 mm for wash basins with inlet and outlet screwd for pipe or connections incl necessary packing, union and cap all as specified and directed.
2
-
-
Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) all as specified and directed.
2
-
-
Vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed complete all as specified and as directed.
2
-
-
Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms, complete all as specified and directed.
15
-
-
20 mm dia nipple of PTMT, suitable for HDPE water tank, min weight 45 gms, complete as as specified and as directed.
15
-
-
PVC (SWR) gully traps 125 x 110 mm, setting and jointing with solvent cement all as specified and directed.
12
-
-
110mm bore,PVC (SWR) Tee any radius, fitted with oval access door all as specified and directed.
8
-
-
PVC (SWR) bends any radius, 110mm bore all as specified and directed.
12
-
-
PVC (SWR) bends any radius, 110mm bore with access door all as specified and directed.
12
-
-
PVC (SWR) vent cowl 110mm dia bore of pipe complete all as specified and directed.
2
-
-
PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches, drain, walls or in floors complete all as specified and directed.
90
-
-
PVC (SWR) pipes 75mm dia single socketed, in any length, laid in trenches, walls or in floors complete all as specified and directed.
15
-
-
75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
7
-
-
Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
11
-
-
Brickwork with fly ash bricks, built in straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
0.8
-
-
Brickwork with fly ash bricks,, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
5
-
-
75 mm thick PCC 1:3:6 type C2(using 40 mm graded agg) as in plinth protection laid and finished in bays not exceeding 2 sqm in paln and filling the joints with mastic bitumen complete all as specified and directed.
30
-
-
Cast iron floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
5
-
-
Cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
4
-
-
Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof covering complete all as specified and directed.
36.3
-
-
Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.
32
-
-
Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in ridges, fixed with self tapping screws all as specified and directed.
4.3
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
1.93
-
-
Rolled mild steel work in purlins, rafters, roof truss etc incl cleats/distance pieces etc complete, conforming to Fe-410 W (Gde-E-250) Quality A all as specified and directed.
140
-
-
Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed.
33
-
-
Demolition of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets all as specified and directed.
35
-
-
Providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturer's instructions all as specified and as directed
10
-
-
Providing & fixing fully peforated 12mm thick micro tegular edged false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions
10
-
-
Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.
15
-
-
Anodised aluminium snap grid 605mmX605mm frame work for false ceiling all as specified and as directed.
15
-
-
Providing and fixing 12mm thick particle board in metal /Al frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and as directed.
5
-
-
Providing and fixing 12mm thick perforated particle board in metal /Al frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and as directed.
10
-
-
MS, plain, black sheet 1.25mm thick In wall cladding,steel gates and similar work,cut to size,holes punched;including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up ,mitred angles,etc as required welded to frame all as specified and as directed.
8
-
-
Taking down existing drain/ soil/ waste/ vent pipes of any description and in any position of any size all as specified and as directed.
35
-
-
Welding in repairs not exceeding 2.5cm in length & thickness not exceeding 6mm complete on windows/ shutters hinges etc including making shutters functionable as directed.
8
-
-
Cleaning the existing SGSW/ CI /PVC (SWR) sewage Pipe line of any dia by mechanical means by rodding, jetting and removing all sludge and foreign matters completely and neatly from the pipe line under foul condition (including lines and manholes under blocked/ choked condition) and making the sewage lines serviceable for free flow of sewage including blocking of higher level manholes, washing with fresh water to the cleaned line by means of hydraulic/ pneumatic/ vacuum water jet etc all as specified and directed. These operation shall be carried out strictly in conformity with the provisions of 'Manual scavenging (Prohibition) Act and by following all mandatory safety provisions.
1300
-
-
Cleaning of manholes of any size and depth up to 2.00 mtrs under foul condition, by removing MH covers, removing of accumulated liquid, sludge/ sediments by mechanical means, transporting the fluid/ sludge etc in covered containers by mechanical means and disposing of the same in CPCB approved central STP/ ETP facility. Cleaning of the manholes with fresh water and white washing inside MH, including petty repairs of cement mortar/ cement concrete (type B-1 1:2:4 using 20 mm graded aggregate and) patch work on holes if any made by rodents and making good to walls, placing the MH covers back intact in position and setting in cement mortar 1:6 all as specified and directed.
70
-
-
Cleaning and removing individual blockages in IWC/ EWC mechanically and removing all sludge and foreign matters completely, neatly and making serviceable for free flow all as specified and directed.
125
-
-
All as per Item No.142 hereinbefore, but for Gully trap / nahani trap / floor trap etc including opening the gratings and replacing the covers / gratings in position and making good complete all as specified and directed.
120
-
-
Cleaning of septic tank / sewage sump / soak well by removing of sludge and sediments in dry or mud state by machanical means, transporting the fluids / sludge etc in covered containers machanically and burying the same in pits where directed including necessary excavation, refill and disposal of surplus soil etc, complete, cleaning of septic tank with water, placing the covers intact and removing bush / vegatation near by septic tank to and extent of 3M all round and removing of sewage water from septic tank/ sewage sump/ soak well through septic tank cleaning lorries having pumping arrangement and carrying the sewage water in tanks of lorry having 5000 liters capacity and disposal of the sewage water 15Km away from outside defence area in the places upproved by local municipality / corporation complete all as specified and directed.
60
-
-
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.50M in depth; for foundation, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.
30
-
-
Demolition and breaking up drain pipe (salt glazed drain pipes, AC or RCC) set in cement mortar internal dia of pipes 150mm / 110mm including under and haunching of cement concrete all as specified and directed.
150
-
-
160mm (outer dia) PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors or in walls all as specified and directed.
80
-
-
110mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door all as specified and directed.
13
-
-
Concrete bed to 150mm bore drain pipes in PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested all as specified and directed.
80
-
-
Concrete bed to 110mm bore drain pipes in PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested all as specified and directed.
70
-
-
Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick using soils all as specified and directed.
98
-
-
Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point as in soils all as specified and directed.
108
-
-
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.
2
-
-
Demolition of cement concrete (unreinforced) in ground floors not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
5
-
-
Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:4) all as specified and directed.
2
-
-
Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed
8
-
-
Precast cement concrete, type B1, 1:2:4 using 20mm graded stone aggregate, set in cement mortar 1:4 as in cover slabs all as specified and directed.
Note: Reinforcement shall be measured and paid separately.
1.8
-
-
PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels and drains including fomr works if necessary all as directed.
2
-
-
100 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base and finished even and fair complete all as specified and directed.
20
-
-
Chequered cement concrete tiles with grey cement and pigments, of size 300x300mm x 25mm thick set, jointed and pointed in neat cement slurry in floor including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.
38
-
-
Machine Pressed precast concrete interlocking paver block rubberised any shape and size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement and pigment including finishing the outer edge with cement concrete 1:2:4 using 20mm graded aggregate complete all as specified and directed.
38
-
-
Sand filling under floors or in foundations including watering and consolidation all as specified and directed.
2
-
-
Mild steel TMT bars 8mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.
80
-
-
Mild steel deformed TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
20
-
-
Rolled Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
20
-
-
Mild Steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe 290 Gde E - 165 complete all as specified and directed.
53
-
-
Mild steel bolt 75mm long 12mm dia with hexgonal or square head one end and screwed the sother or screwed both ends each screwed is to be fitted with washers and one hexagonal or square nut all as specified and directed.
3
-
-
Supply only chain link fencing exceeding 2.00 Kg per sqm but not exceeding 3.5 kg per sqm with size of mesh 50 x 50 mm and thickness of wire not exceeding 4mm complete all as specified and as directed.
90
-
-
Fixing only chain link fencing including line wire, any mesh, any size galvanised mild steel to any type of strandard rails, straining bolts etc complete, all as specified and directed.
36
-
-
Dismantling of (steel, wood, or RCC) posts or struts embedded in ground, any section incl taking out embedded portion and making good disturbed ground, complete all as specified and directed.
5
-
-
All as per item No.170 hereinabove but posts embedded in concrete, brick work, masonary, etc, complete all as specified and directed.
5
-
-
Excavating in post holes (or similar holes) each in hard / dense soil not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removal of excavated materials to a distance not exceeding 50mtr and making good surfaces, complete all as specified and directed
3
-
-
Rough excavation/ cleaning of weeds, mud, sand, etc from storm water drain including, excavating of rubbish off from site in poul position, complete all as specified and as directed.
9.2
-
-
Dismantling of old damaged chain link fencing wiremesh any type and size, complete all as specified and as directed.
36
-
-
Excavation in trenches not exceeding 1.50m deep and not exceeding 1.5m width in soft/ loose soil for taking out / laying of pipe line complete all as specified and as directed.
111
-
-
Taking out / up / down from trenches /walls /floors of galvanised steel tubings and connections of bore of pipe 20mm dia complete all as specified and as directed.
260
-
-
Taking out / up / down from trenches /walls /floors of galvanised steel tubings and connections of bore of pipe 25mm dia complete all as specified and as directed.
300
-
-
Taking out / up / down from trenches /walls /floors of galvanised steel tubings and connections of bore of pipe 40 /50mm dia complete all as specified and as directed.
790
-
-
Taking out / up / down from trenches /walls /floors of galvanised steel tubings and connections of bore of pipe 80mm dia complete all as specified and as directed.
50
-
-
Taking out / up / down from trenches /walls /floors of galvanised steel tubings and connections of bore of pipe 100mm dia complete all as specified and as directed.
12
-
-
Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 20mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed.
100
-
-
Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 25mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed.
150
-
-
Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 40mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed.
50
-
-
Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 50mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed.
150
-
-
Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 80mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed.
50
-
-
Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 100mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed.
12
-
-
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls complete including connections of bore size of pipe 20mm dia all as specified and directed.
100
-
-
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls complete including connections of bore size of pipe 20mm dia all as specified and directed.
150
-
-
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls complete including connections of bore size of pipe 50mm dia all as specified and directed.
Note for item No 187 to 189: 1. Excavation and earth work will be measured and paid separately.
2. Suitable size of Union will be provided at all branches tees joints and at a maximum distance of 30 RM of straight pipe and rates are deemed to be included in the rate quoted above for ease in maintenance.
150
-
-
Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 15mm bore complete all as specified and as directed.
7
-
-
Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 20mm bore complete all as specified and as directed.
9
-
-
Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 25mm bore complete all as specified and as directed.
10
-
-
Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 40mm bore complete all as specified and as directed.
5
-
-
Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 50mm bore complete all as specified and as directed.
10
-
-
Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes bore 100mm dia Non return butterfly valve complete all as specified and as directed.
1
-
-
Supply, fixing and testing sluice valve flanged and drilled both ends CI body, heavy duty, class PN 1:6 gun metal spindle conforming to IS 14846 including jointing with and including rubber gaskets, bolts, nuts, and washers complete and dismantling taking out old unserviceable sluice valve including cutting unscrewing old nut bolts for size 80mm dia complete all as specified and directed.
2
-
-
Supply, fixing and testing sluice valve flanged and drilled both ends CI body, heavy duty, class PN 1:6 gun metal spindle conforming to IS 14846 including jointing with and including rubber gaskets, bolts, nuts, and washers complete and dismantling taking out old unserviceable sluice valve including cutting unscrewing old nut bolts for size 100mm dia complete all as specified and directed.
2
-
-
Supply, fixing and testing sluice valve flanged and drilled both ends CI body, heavy duty, class PN 1:6 gun metal spindle conforming to IS 14846 including jointing with and including rubber gaskets, bolts, nuts, and washers complete and dismantling taking out old unserviceable sluice valve including cutting unscrewing old nut bolts for size 150mm dia complete all as specified and directed.
2
-
-
Supply, fixing and testing sluice valve flanged and drilled both ends CI body, heavy duty, class PN 1:6 gun metal spindle conforming to IS 14846 including jointing with and including rubber gaskets, bolts, nuts, and washers complete and dismantling taking out old unserviceable sluice valve including cutting unscrewing old nut bolts for size 200mm dia complete all as specified and directed.
2
-
-
Foot valve of Brass, Plunger type, heavy duty suitable for 100 mm dia pipe line, including replacement of old unserviceable foot valve of any type and size from suction pipe of pump set all as specified and directed.
2
-
-
Foot valve of Brass, Plunger type, heavy duty suitable for 50 mm dia pipe line, including replacement of old unserviceable foot valve of any type and size from suction pipe of pump set all as specified and directed.
Note for item No 200 & 201: The rate coated above deemed to be included the cost of minor alteration to the pipe for fixing of above foot valve complete.
1
-
-
PVC insulated water proof multi stranded copper conductor cable 3 core 6Sqmm 1100 volts grade ISI marked including disconnecting dismantling taking out old unserviciable cable from LT panel to submersible pump moter set in bore well all as specified and directed.
90
-
-
PVC insulated water proof multi stranded copper conductor cable 3 core 10Sqmm 1100 volts grade ISI marked including disconnecting dismantling taking out old unserviciable cable from LT panel to submersible pump moter set in bore well all as specified and directed.
90
-
-
Chlorinated water testing Kit with coloured sample complete with all testing fitments and OT solution in rexine finish / wooden box/ PVC box complete all as specified and direcetd.
2
-
-
Collection and testing of water sample collected from taken over points at Madukkarai and tested in any authorised Government approved lab/NABL and obtain the water testing report and submit to AGE E/M office complete all as specified and directed. Note: 1) 5 Ltr sealed bottle used for collecting the sample shall be provided by the contractor.
2) Testing of water for physical and chemical parameters shall be deemed to be included in quoted rate.
6
-
-
Preparation/ cleaning of old painted steel surfaces of any description such as electric motor operator pumps set and base plates, its foundation including suction/deliver GI Pipe line up to ground level writing of SM No.etc all as per colour code or all as specified and directed. Note:- One job includes Two Sets of pump and pipe line of suction and delivery and other connected items all above at one installation including writing of block stencil cut MES No.2 cm height complete all as specified and as directed.
2
-
-
Site clearance by cutting of shrubs, cutting of grass, bush weed, trees, sapling not exceeding in 30 CM girth and removal of grass with roots and leveling area and removal of same outside not more than 50m complete all as specified and directed.
400
-
-
Supply and replacement of star delta starter fully automatic suitable for electric pump set motors 7.5 HP to 10 HP cap, 3 phase, 415volts, comprising of main star delta contactor, timer, overload relay including taking out old unserviceable starter complete all as specified and directed.
Note: The rate coated above are deemed to be included the cost of minor alteration to the panel for fixing of above starter complete all as specified and directed.
1
-
-
cleaning of 2 lakh ltr capacity RCC UG water storage sump / ground level tank by pumping out dirty water & removing all sludge, dirt silt etc from walls and floor of the tank & treating the wall with bleaching powder,rubbing scrasping walls and floor with the wire brushes and taking out all silt, sludge and dirt from the sump and depositing to a distance up to 50 meter complete all as directed by engineer in charge after primery cleaning the empty sump shall be cleaned further with mixture of fresh water and potassium permagnate at the rate two percent with water & washing the sump shall be continued till water stored in the tank looks clear and then appling two coats of lime wash inside the sump and painting of outer dom / top by means of white wash and writing the date of cleaning and capacity of sump of size of letter 4" with White synthetic enemel paint over Black synthetic enamel paint patta of suitable size, distinctively and area cleaning incl removal of bushes,unwanted plants and grass with roots around 50mtr all the sides from the UG resorvoirfor all as specified and directed.
1
-
-
All as per item No 209 hereinbefore but 50000 Ltr capacity all as specified and directed.
2
-
-
All as per item No 209 hereinbefore but 4 Lakh Ltr capacity all as specified and directed.
1
-
-
Cleaning of 30000 Gallan capacity 20 mtr RCC overhead water storage tank by removing all sludge, dirt silt etc from walls and floor of the tank & treating the wall with bleaching powder,rubbing scrasping walls and floor with the wire brushes and taking out all silt, sludge and dirt from the sump and depositing to a distance up to 50 meter complete all as directed by engineer in charge after primery cleaning the empty sump shall be cleaned further with mixture of fresh water and potassium permagnate at the rate two percent with water & washing the sump shall be continued till water stored in the tank shall be continued till water stored in the tank looks clear and then appling two coats of lime wash inside the tank and writing the date of cleaning and capacity of Tank of size of letter 4" with synthetic enemel paint (white) over Black synthetic enamel paint patta of suitable size,distinctively including preparation of base and area cleaning incl removal of bushes,unwanted plants and grass with roots around 50mtr all the sides from the OH resorvoir all as specified and directed.
1
-
-
All as per item No 212 hereinbefore but 20000 gallon capacity 15 mtr all as specified and directed.
1
-
-
All as per item No 212 hereinbefore but 44000 gallon capacity 20 mtr all as specified and directed.
1
-
-
Replacement ball valves made out of PVC with polythene float and fly nut of size 25mm bore of pipes complete all as specified and directed
60
-
-
Replacement ball valves made out of PVC with polythene float and fly nut of size 20mm bore of pipes complete all as specified and directed
150
-
-
Lifting and dismantling the submersible pump set 7.5 HP to12.5 HP capacity by dismantling pumps and motor and replacement of worn out spares of pumps and reassembling the same and testing complete all as specified and directed.
1
-
-
Rewinding of 7.5 up to 12.5 HP AC three phase Submersible monoblock motor with super enameled copper wire of same wire gauge and turn out old burnt out wire with insulating material including varnishing , turning and polishing to the shaft and / or rotor, including replacement of suitable size of bearing etc complete all as specified and directed.
1
-
-
Rewinding of 5 to 10 HP capacity AC three phase pump set motor with super enameled copper wire of same wire gauge and turn out old burnt out wire with insulating material including varnishing, turning and polishing to the shaft and or rotor, including replacement of suitable size of bearing etc complete all as specified and directed.
1
-
-
Repair and replacement Terminal plate with brass nuts ,washers suitable for 3 phase 5 to 10 HP mono block pump set complete all as specified and directed.
1
-
-
Repair and replacement of Rubber bush coupling suitable for 10 HP Centrifugal pump set complete all as specified and directed
1
-
-
Cleaning and removing all scale, dirt etc from 250 Ltrs capacity RCC/ AC/ Ferro cement water tanks and mouth of circular pipes, following capacity of tanks including writing letters or figures (Block, Roman, Italic or Indian ) not exceeding 15cm high (Example: Cleaned on 05 JAN 2022) complete all as specified and as directed.
30
-
-
Cleaning and removing all scale, dirt etc from 500 Ltrs capacity RCC/ AC/ Ferro cement water tanks and mouth of circular pipes, following capacity of tanks including writing letters or figures (Block, Roman, Italic or Indian ) not exceeding 15cm high (Example: Cleaned on 05 JAN 2022) complete all as specified and as directed.
350
-
-
Cleaning and removing all scale, dirt etc from 1000 Ltrs capacity RCC/ AC/ Ferro cement water tanks and mouth of circular pipes, following capacity of tanks including writing letters or figures (Block, Roman, Italic or Indian ) not exceeding 15cm high (Example: Cleaned on 05 JAN 2022) complete all as specified and as directed.
100
-
-
Cleaning and removing all scale, dirt etc from 2000 Ltrs capacity RCC/ AC/ Ferro cement water tanks and mouth of circular pipes, following capacity of tanks including writing letters or figures (Block, Roman, Italic or Indian ) not exceeding 15cm high (Example: Cleaned on 05 JAN 2022) complete all as specified and directed.
Note for item No 222 to 225: Detail procedure of cleaning the water tank is as below:-
a) Remove all water from the water tank and then desilt the tank
b) All walls & floor of the tank should be scrubbed througly with detergent powder
c) Then the tank is again filled with fresh water & bleach powder is to be added in the dose 4-5 gram per 1000 liters
20
-
-
Cover for sintex tank of 200/500/1000 lit cap made of polythene with all accessories all as specified and directed.
50
-
-
MS plain black sheet 1.60mm thick for covering to top of water tank staging valve chamber cover cut to size hole & punching including reveting welding as required complete fixed in repairs all as specified and directed.
10
-
-
Preparation /cleaning of old painted steel surfaces of Valve chamber cover,pipe line, pump house doors/window etc. carrying painting with one coats of synthetic enameled paint first quality paint all as specified and directed.
20
-
-
Motor starters for submersible water pump set Heavy duty DOL starter type MK I with robust 4 pole contactor & LR1D OLR in S.S enclosere. Suitable for 5 HP 3 phase all as specified and directed
1
-
-
Supply only Bleaching powder for water treatment complete all as specifeid and directed.
50
-
-
Supply only alum sulphate complete all as specified and directed.
20
-
-
Material & labour for attending breakdown of 150 mm dia pipe line bursting/cracks including broken pipe pieces of various sizes through gas cutting or manual cutting as required at site and providing new CI/MS/GI pipes of required length (not more than 2m) and removing out the damaged CI pipe and inserting necessary specials such as flanges etc as required at site including testing for the leakages of flange joints for 150mm dia MS/CI pipes complete all as specified and directed. Note: Excavation,returning refilling will be measured and paid seperately under relevant item of Sch.
4
-
-
Supply and replacement of water level indicator for over head tanks including all ball, rope, pully and level indicator as per site requirement complete all as specified and directed.
1
-
-
Integral aviation light comprising of aluminium housing with polycorbonate enclosure with LED lamp fixed in position on over head tank minimum height 30 meter staging with provisiong of 1.5 Sq.mm 3 core multi stranded copper conductor cable passing through PVC conduit pipe with all fixing accessories including taking down old unservicable light fitting complete all as specified and directed.
1
-
-
Supply and fix pressure gauge with chromium plated brass cock and tube range up to 7Kg/ Sq cm for pumpset including all accessories required to be fixed on CI / GI pipe lines including taking out old unserviciable pressure gauge complete all as specified and directed.
2
-
-
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete including tube light fittings, switches, ceiling roses, pendants, fan regulators, sockets etc and making good to the disturbed surfaces of walls, floors, roof etc all as specified and directed.
55
-
-
Point wiring complete with two runs of 1.5Sqmm (for Phase and Netural) PVC insulated unsheathed multistranded copper conductor FRLS cable of 1100V grade conforming to IS-694 drawn through and including new non metallic rigid PVC conduit medium grade ISI, Marked with conduit accessories on wall / floor and fixed on ceiling / roof/ truss/ columns etc including provision of factory made branded galvanized steel pressed steel terminal box (modular metal flush box) 3mm thick of suitable module of housing the modular switches, sockets, fan regulators etc, complete on walls and provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc for one light point controlled by one No one way switch 5/6 Amps complete all as specified and directed.
20
-
-
All as per item No 237 hereinbefore but one ceiling/ Exhaust fan point controlled by one No one way switch 5/6 Amps complete all as specified and directed.
10
-
-
All as per item No 237 hereinbefore but one 3 pin 5 Amps socket outlet on the independent boards controlled by one 5 Amps switch complete all as specified and directed.
10
-
-
All as per item No 237 hereinbefore but one 3 pin 5 Amps socket outlet on the same board with other switches controlled by one 5 Amps switch complete all as specified and directed.
10
-
-
All as per item No 237 hereinbefore but for 4 Sqmm PVC insulated and PVC unsheathed copper multi stranded conductor cable and 4 Sqmm multi stranded copper conductor for earth wire for 3 pin 15 Amps power points all as specified and directed.
5
-
-
Switch Piano flush button single pole one way 5 Amp 240V, 50Hz AC, ISI marked complete all as specified and directed
50
-
-
Ceiling rose surface Bakelite three terminals 65x25mm PVC/ Polycarbonate isolated body all as specified and directed.
30
-
-
Lamp holder PVC/ Polycarbonate type with back plate suitable for angular fitting all as specified and directed.
10
-
-
Stepped switch type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.
10
-
-
Stepped socket type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.
10
-
-
Replacement of switch socket outlet 2 in 1, 3 pin, 5 and 15 Amps complete all as specified and directed.
5
-
-
Replacement of switch socket outlet 3pin, 5 flush type complete all as specified and directed.
5
-
-
Replacement of bell push, flush type 5 Amps all as specified and directed.
5
-
-
Replacement of bell push, flush type 5 Amps modular press type complete all as specified and directed.
Make: Legrand Model Myrius
5
-
-
Replacement of switch flush type 5 Amps modular press type all as specified and directed.
5
-
-
Replacement of switch flush type 15 Amps modular press type all as specified and directed.
5
-
-
Replacement of stepped type electronic fan regulator modular press type complete all as specified and directed.
Make: Legrand Model Myrius or equivalent in Havells/ Crompton/ Anchor
5
-
-
Replacement of bell AC multi music type 230 volt all as specified and directed.
5
-
-
Taking down old unsv FTL fittings, Supply and fix 20W LED batten light Lum output 2000 CCT 6500K Size 115x2.5x3.5 cm comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. Panasonic Product Code-. PBTM01207 or equivalent in Philips/ Bajaj.
40
-
-
Taking down old unsv FTL fittings, Supply and fix 10W LED batten light Lum output 1000 CCT 6500K Size 59x2.2x3.4 cm comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. Panasonic Product Code-. PBTM01107 / Philips / Bajaj.
50
-
-
LED light fitting mirror type with high out put diffuser 1 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Make: Surya Cat Part No 5WG-LINEECO or equivalent in Havells / Wipro
5
-
-
LED bulb operating voltage 120-300 V AC IP 20 wattage 9CCT 6500K lumen output 900 (Main) 350 (Battery) 4hr backup B-22 holder type all as specified and directed.
Make: Panasonic Product Code PBUM13097 or equivalent in Philips / Bajaj
50
-
-
Candle LED lamp 3 watt E 14 candle lamp for type cool day light 230/240 AC supply complete all as specified and directed.
Make: Surya Cat Part No 3WCANDLE or equivalent in Havells / Wipro
10
-
-
Round shape 12 watt 220 volts AC 6500K recesse cum surface panel type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Surya Cat Part No SLE DLS 12W RIVO RD XX or equivalent in Havells / Wipro
2
-
-
LED luminaire 600mm x 600 mm, 35/36 watts, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed.
Make: Surya Cat Part No SLE DS 36 22R- ASTRUM or equivalent in Havells / Wipro
10
-
-
LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make: Havells Cat Part No ENDURASUNDOWN SL35WLED 765PASYBOPC or equivalent in Surya / Wipro
8
-
-
PVC insulated water proof multi stranded copper conductor cable 3 core 2.5 sq mm 1100 volts grade ISI marked for security light to the DB complete all as specified and directed.
54
-
-
Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.
4
-
-
Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.
3
-
-
Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 4 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.
2
-
-
Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 8 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.
1
-
-
Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.
10
-
-
All as per item No. 268 hereinbefore but SPN 230V 32 Amps capacity all as specified and directed.
5
-
-
All as per item No. 268 hereinbefore but MCB TPN 415V 40 to 100 Amps capacity all as specified and directed.
1
-
-
Re-winding the stator complete with super enamelled copper conductor with same size, number of turns as that of old one including insulating, varnishing and pre heating for Ceiling fan 1200mm/1400mm sweep any model all as specified and directed.
20
-
-
All as per item No 271 hereinbefore but for Exhaust fan up to 300mm sweep all as specified and directed.
5
-
-
Supply and replacement ceiling fan condenser 2.5 MFD, 240 volt, AC complete all as specified and directed.
52
-
-
Earthing complete with GI earth plate electrode 60cmx60cmx6mm thick buried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m below normal ground level connected to GI earth strip of 32x6 mm by means of bolts and nuts washers mase out of GI and earth strip protected by Galvanized pipe light grade 40mm bore, 20 mm bore medium grade watering pipe and connected to main control board all as shown in Electrical plate No 5 of SSR part I including necessary earth work and excavations in any type of soil PCC 1:2:4 type B1 chamber with 40mm thick, RCC 1:2:4 cover slab with 6mm dia MS bars etc complete all as specified.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements