Military Engineer Services Tender

Material and labour for preparing of old flexible /rigid surfaces by Wire brush and remove dust particles,etc by using compressed air blow or vaccum clean to ensure free from contaminants, flying debris, laitance, loosely adhering concrete, after that applying one coat of aqua water based painting of any tint approved by MORTH, IRTC and AAI as in lettering, dashes, arrows for preparation of old painted/new rigid surface applying complete all as specified and as directed by Engr-in-Charge Note : one coat of aqua water based road marking/runways paint shall be applied as per manufacturers instructions along with MORTH Technology and specially by using mechanical sprayer complete all as specified and as directed by Engineer-in- charge.

All as per item No 01 here-in-before but on old painted/new flexible/bituminous surfaces.

Material and labour for one coat of retro reflective painting to runway, taxi way, centre line, apron markings etc. either continuous or broken lines to the required width and length over the existing painting surface/new surface on bituminous surface with solvent based road marking paint (Retro reflective paint) Brand : Road King or equivalent brand approved by MORTH, IRTC and AAI including supply of paint material at the rate of 0.5 litre per sqm and glass beads at the rate of 0.35 Kg per Sqm (Reflective index 1.5) with self propelled airless spray painting equipment including , remove dust particles by using compressed air blow or vaccum clean to ensure free from contaminants, flying debris, laitance, loosely adhering concrete,preparation of surface upto the requirements at site complete all as specified and as directed by Engineer-in-Charge. Note : Retro reflective paint shall be applied as per manufacturers instructions along with MORTH Technology and Specially.