Military Engineer Services Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date7 Nov 2024
Closing Date5 Dec 2024
Tender Amount₹ 99,00,000
Costs
EMD
₹ 1,73,500Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Repair / Replacement Of Rcc Slab In Kitchen, Joinery, Plate Rack, Cupboard, Flooring, And Broken Stair Case, Sanitary Fitting, Certain Parking Shed, Other Misc B/r Works In Omq Area
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_682817_1Tender No
8717/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(b) Cleaning the sunken/ lowered portion of RCC slab surfaces (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper sploe including cutting holes in bricks or RCC wall for spout
-
-
-
(c) Rendering of uneven surfaces with 10mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/ seepage is noticed, nozzles shall be fixed and grouting carried out. (Quoted rate shall be deemed to be inclusive for WPC )
-
-
-
(d) All junctions points of side wall where CI/ GI pipes are passing through shall be sealed with epoxy putty.
-
-
-
(e) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.
-
-
-
(f) M&L for applying two coats of polymer modified cementious water proof coating as per manufactures instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.
-
-
-
(g) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturers specification including rounding of corners and junctions sloping towards spout. (Quoted rate shall be deemed to be inclusive for WPC )
-
-
-
(h) PCC 1:5:10 type E2, complete all as specified
-
-
-
(j) PCC 1:2:4 type B0 40mm thick, complete all as specified
-
-
-
Note for item No 1 to 11 :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage, seepage and to the entire satisfaction of GE. Test shall be done in presence of reps of Engineer-in-Charge and record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is include in the rates quoted above.
-
-
-
Repair of leakage/seepage from the Nahani trap/ floor trap of kitchen/ bathroom/ washbasin of the upper Qtr, in any position at any height, complete including change of floor trap, PVC horinzontal pipe embeded in floor in bathroom or kitchen making good to the damage portion of flooring, laying and matching of tiles in the existing flooring, complete all as specified and directed by Engineer-in-Charge.
30
-
-
Repair of leakage/seepage from the wall/ door bend /door tee/ 'Y' junction/ 'T' Junction of soil pipe / waste pipe/ vent pipe of kitchen/ bathroom/WC of the upper Qtr or at the ground floor Qtr including change of any damage soil waste pipes or fittings of any shape, specification and size, making good to the damage portion of wall with brick work in cement mortar 1:6 or cement concrete 1:2:4 and plastering to wall in CM 1:4 and matching to existing wall complete to avoid the leakage/ seepage at the site of work as directed and specifie by the Engineer -in- charge
30
-
-
Note for item No 13 & 14 :- (a) Find out main cause of leakage and take necessary steps to resolve / rectify.
(b) Replace existing tiles in case leakage through NT/FT.
(c) The rate also include provision of new NT/FT.
(d) The unit rate is also deemed to be included for reqd bonding chemicals to arrest the leakage/seepage as direct by the manufacturer specification. Make : M/s Sika Chemical, M/s Pidilite, M/s Dr Fixit
-
-
-
M&L Water proofing treatment of existing roofs as per details given below after complete removal of existing water proofing treatment and expose of top surface of RCC slab of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with water and using wire brush including removing debris to outside the MOD land complete all as specified and as directed :-
300
-
-
Note for Item No 16 :-
(a) Surface should be free from any loose paint, dust or grease. Remove all existing bitumen coatings completely by using intense wire brushing, high speed water jet & vacuum cleaner for thorough cleaning of the surface to avoid ‘Peeling off’ problems.
-
-
-
(b) All cracks at corner joints, channels and parapets should be properly treated. For filling cracks upto 3mm crack seal material of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical to be used. Bigger cracks, damaged portions & hollow areas must be repaired with polymer modified cement mortar.
-
-
-
(c) Apply a coat of self priming smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical with 33% dilution with water using brush/roller on newly plastered surface after curing as per IS-456 and allow to dry for 4 to 6 hours (dilution & forced coverage requirement strictly as per manufacturer’s instructions).
-
-
-
(d) After the primed surface has dried, apply first coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same primed surface & allow to dry for 4 to 6 hours.
-
-
-
(e) Prepare for apply 2nd coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same surface. The temp to be maintained 25 to 35° C through out the all above application work.
-
-
-
(f) In case of severe dampness an additional coat of damp proof materials to be applied.
-
-
-
Note for item No 16 to 22 :- (i) The work shall be carried out through authorized and qualified applicators of the following manufacturers only. MOU to be submitted before commencement of work. Make : M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical
-
-
-
(ii) A performance guarantee certificate for 10 years shall be submitted by the contractor to the GE on completion of work as specified.
-
-
-
(iii) The unit quoted rate is deemed to include taking down of water pipeline, tanks, wires (etc) found on roof and refix at the original position after complete treatment of roof.
-
-
-
(iv) The unit quoted rate shall be inclusive of material, all labours, tools and plants including scaffolding required for working upto approx 7.5 mtr height from natural ground level.
-
-
-
(v) The unit rate quoted for item is deemed to include for Removing of accumulated earth of any width and depth upto 15 cm cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 3 m from plinth protection to outside MD land.
-
-
-
(vi) Adoption of necessary safety arrangement like safety belts, ropes, helmets, netting etc. which are required for safety of working labour at height exceeding 3 to 25 mtr height shall be mandatary and deemed to be included in the unit rate quoted.
-
-
-
M&L Plain cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in roof kerbs, benching rounded or chamfered on edge all as specified complete all as directed.
1
-
-
M&L in repairs Doom grating 125mm dia with waste hole of PTMT(minimum weight 40gms) Including taking down existing one complete all as specified and as directed by Engneer-in-Charge.
60
-
-
M&L Taking down & re fixing high or low level flushing cistern 10 ltrs capacity & connections to pipes & fixing of chain & pull or lever after cleaning inside of all dirt, scale formation, replacement of rubber washers, stopping of leakage etc complete all as specified and as directed
60
-
-
M&L PVC connection 15 mm size with PTMT nuts of length 450 mm including taking down existing one complete as directed by Engr-in-charge.
90
-
-
M&L WHB, vitreous china (flate back or angle back type) of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe Complete including taken down existing one all as specified .
30
-
-
M&L 32 mm low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm for WHB Including taken down existing one complete all as specified and as directed by Engineer-in-Charge
75
-
-
M&L Bib Cock with wall flange screwed down screwed for iron pipe 15mm bore CAT Part No CQT -23047 of Jaquar or equivalent to Parryware/Hindware/Cera including taking down existing one complete as directed by Engr-in-charge.
60
-
-
M&L Angular stop cock, valves high pressure screwed both ends iron pipe or for unioins 15mm dia, CAT Part No G3007A1 of Parryware or equivalent to Hindware/Cera including taking down existing one complete as directed by Engr-in-charge.
60
-
-
M&L Pillar taps 15mm bore CP with capstan head screwed down high pressure screwed for iron pipe Cat Part No F2006101, HT F3001101 of CERA or equivalent to /Parryware/Hindware/ Cera including taking down existing one complete as directed by Engr-in-charge.
55
-
-
M&L in repairs Chromium plated wall mixer with provision for over head shower with 115mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed. Make:- CQT 23273 of Jaquar or equivalent in Parryware /Hindware / ESS-ESS all as specified and as directed.
30
-
-
M&L Glass shelf assembly including taking down existing one complete as directed by Engr-in-charge.
(Make : CAT Part No-F5001114 continental of CERA Continental series or equivalent make of Parriware /Hindware all as specified and as directed.
15
-
-
M&L Towel Ring round including taking existing one complete as directed by Engr-in-charge.
Make: (Make : CAT Part No-ACN-1121BN of Jaguar series or equivalent make of hindware / parriware all as specified and as directed.
15
-
-
S&F in repair CP Soap dish CAT Part No-F5003106 of CERA or equivalent make of Parriware /Hindware all as specified and as directed.
25
-
-
S&F in repair Towel rail 24" long for wash basin Make: (Make : CAT Part No-F 5007103 of CERA series or equivalent make of hindware / parriware all as specified and as directed.
35
-
-
S&F Plastic water closet seat for EWC with flat bottom and cover and mild steel chromium plated or alluminised hinging device fixing Including taking down existing one complete all as specified and as directed by Engineer-in-Charge.
52
-
-
S&F CP 2 way bib cock with wall flange fancy type screwed down screwed for iron pipe in repairs 15mm bore CAT Part No-Sl. No-CQT-23041 Jaquar or equivalent in Parryware ,or as per list of makes Including taking down existing one complete all as specified and as directed by Engineer-in-Charge
40
-
-
S&F CP Hand shower (Health Faucet) with 1M Flexible Tube with 8mm bore wall Hook with N.R.V (Back Flow Preventor) CAT Part No-S. No-ALD CHR-579 Jaquar equivalent in ESSCO/ Kohler as per list of makes Including taking down existing one complete all as specified and as directed by Engineer-in-Charge
50
-
-
S&F PVC body cabinet mirror of size 500 X 400 MM of approved design and pattern Including taking down existing one complete all as specified and as directed by Engineer-in-Charge . (Make: Cat Part No 556 of Prayag or its equivelent in ESSCO/ Kohler as approved by GE
10
-
-
M&L Vitreous china Ware wash down water closet (Pedestal), white (EWC) Plastic seat of same colour of WC, closed pattern with flat bottom, and cover and Mild steel chromium plated hinging device including taking down the existing fitting complete all as specified and directed.
30
-
-
S&F PVC Dual flush ceramic colour, low level, 10 litres capacity, star white with inlet float ball valve, PVC flush pipe and handle, making proper fixing and hanging arrangements Including taking down existing one complete all as specified and as directed by Engineer-in-Charge Make/Cat Part No:- 21029 of hindware or equivalent approved make
40
-
-
S&F Vitreous china squatting pan 'Orissa' Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor including provision of lime concrete bedding fixed in repairs all as specified and as directed.
24
-
-
S&F PVC (SWR) P trap 110 mm bore Including taking down existing one complete all as specified and as directed by Engineer-in-Charge
20
-
-
S&F PVC (SWR) S trap 110mm bore Including taking down existing one complete all as specified and as directed by Engineer-in-Charge
20
-
-
M&L 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall incuding taking down existing complete all as specified and as directed.
140
-
-
S&F PVC (SWR) 75mm bore junction single (single T) equal or unequal provided with access door including taking down existing one complete all as specified and as directed by Engineer-in-Charge
15
-
-
S&F PVC (SWR) branch piece single (single Y) 75mm bore equal or unequal provided with access door including taking down existing one complete all as specified and as directed by Engineer-in-Charge
15
-
-
S&F PVC bends 75mm bore including taking down existing one complete all as specified and as directed by Engineer-in-Charge
27
-
-
S&F PVC (SWR) 75mm bore junction vent cowl including taking down existing one complete all as specified and as directed by Engineer-in-Charge
17
-
-
M&L 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall incuding taking down existing complete all as specified and as directed.
200
-
-
M&L PVC bends 110mm bore including taking down existing one complete all as specified and as directed.
50
-
-
M&L PVC (SWR) 110mm junction (single T) equal or unequal provided with access door including taking down existing one complete all as specified and as directed.
24
-
-
M&L PVC (SWR) 110mm junction vent cowl all as specifed including taking down existing one complete all as specified and as directed.
30
-
-
M&L in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 75 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and directed.
90
-
-
M&L in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 110 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore complete all as specified and directed.
90
-
-
S&F 600 x 450 mm bevelled edge mirror fixed with 04 Nos Stainless steel studs including taking down existing one complete all as specified and as directed.
35
-
-
M&L Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , treading, oil, greasy spots and applying one coat oil bound distemper complete all as specified and as directed.
8000
-
-
M & L Preparation of old decorated plastered or unplastered surface of wall, chajja, balcony, facia etc., brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading, oil, greasy spots and applying one coat of white wash complete all as specified and directed.
4000
-
-
M & L Preparation of old plastered or unplastered surface of ceiling brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spotsand applying one coat of white wash complete all as specified and directed.
2000
-
-
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
250
-
-
M&L Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed.
1000
-
-
M&L Preparation of old decorated surfaces of walls by using pressure washer, remove existing colour/treatment and dirt, dust etc ,applying 2mm thickf wall care putty and then apply two coat of oil bound distemper of required shade over one complete all as specified and as directed by Engineer - in - Charge.
1000
-
-
M&L preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , treading, oil, greasy spots and applying one coat cement base paint complete all as specified and as directed.
2800
-
-
M&L Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds, mass, efflorescent , treading, oil, greasy spots including removal of existing colour/treatment, dirt, dust etc and applying two coats oil bound distemper complete all as specified and as directed.
3000
-
-
M&L Preparation of old painted wooden surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint using mechanical means complete all as specified and directed.
200
-
-
M&L Preparation of new steel surfaces under 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of of red oxide primer complete all as specified and as directed.
6
-
-
S & F Factory made UPVC three track sliding Window frame having 2 tracks for glass shutter and 1 track for mosquito sash made of upvc profile section of size 73mm x 42mm (wxh) having outer wall thickness of 2.0mm(+/-0.2mm). Sliding glass shutter shall be made of UPVC section of size 55mm x 33mm and sliding wire mesh shutter shall be made of UPVC section of size 40mm x 22mm. All section of the frame, sash, transom & mullion, as applicable, shall be duly reinforced with G/J/U/O shape galvanised mild steel section of required thickness considering structural / wind load requirement. System shall be provided with the suitable upvc bead for glazing of the system & fitted with inner & outer EPDM seal gaskets. Clear Glass of Saint Gobain / Modiguard make with thickness of 4mm and stainless steel wire cloth of 0.19mm nominal dia. All welded joints are to be neatly trimmed & feature grooved/raised nib finish so make the finished product free from all sharp edges & burrs. All the corner / mullion / transom joints of the frame and sash shall be mitered cut & fusion welded without any mechanical joining. System shall have adequate drainage mechanism to permit the escape of water from horizontal member beneath each sealed unit. System is to be provided with proper operating & locking hardware mechanism. Window locking system will be either both side push lock system or semi-circle locking system in centre. Complete window shall be fixed in to the existing pre finished aperture, by drilling and fixing through the outer frame using quality fasteners & silicon glue is applied to fill up the crevice between wall and window frame for leak proof installation including taking down existing one complete all as specified. Note: - The contractor will have to submit 5 years warranty certificate for upvc profile and 1 year warranty certificate for hardwares.
50
-
-
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly
reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in imension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
18
-
-
S & F 25 mm outer dia of pipes3-layer PP-R Polypropylene random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized andantimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded polypropylene random fittingsfixed complete to walls, ceilings or infloors etc. including taking down existing pipe all as specified and directed.
400
-
-
S & F 20 mm outer dia of pipes3-layer PP-R Polypropylene random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized andantimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded polypropylene random fittingsfixed complete to walls, ceilings or infloors etc. including taking down existing pipe all as specified and directed.
240
-
-
Note for item No 76 & 77 :-
(a) The unit rate shall be include for taking down existing GI pipe and connections and all fittings as directed.
-
-
-
(b) The unit rate shall be include the cost of short lengths, with all pipe fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accssories such as pipe hooks, screws clamps etc
-
-
-
(c ) Wall thickness of pipes shall be all as per IS : 15801
-
-
-
S & F 20mm outer dia of pipes PPR gate valves (brass insert) as per requirement of sites incl taking down existing one complete all as specified and directed.
16
-
-
S & F 25mm outer dia of pipes PPR gate valves (brass insert) as per requirement of sites incl taking down existing one complete all as specified and directed.
20
-
-
S&F Mild steel work in framed work such as grills and similar work including framed guard bars, barred iron doors, ladders, framed balusters etc., including of fixing of sheet steel or other covering to doors etc., to be prepared for hanging /sliding with or including either hooks or hinges or steel hanging door fittings etc., confirming to Fe 410-0 or Fe 310-0 work complete including Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
1180
-
-
M&L two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width and girth including preparation complete all as specified and as directed.
450
-
-
Note for item No 84 :-
(a) Synthetic enamel paint shall be of 1st quality manufactured by the standard firms of make as specified.
-
-
-
(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.
-
-
-
(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE.
-
-
-
(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite)
-
-
-
(e) Unless otherwise specified the tints of paint shall be as approved by the GE
-
-
-
(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.
-
-
-
(g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge.
-
-
-
(h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.
-
-
-
M&L taking down cement plaster on brick or stone walls, or concrete or ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering and material and labour for Rendering 15 mm thick in two layers on brick or stone or concrete surfaces,first coat 10mm thick in cement mortar 1:4 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.
200
-
-
supply only integral water proofing compound complete all as specified and directed.
55.62
-
-
M&L Preparation of new plastered surfaces wall/ ceiling and applying two coat of white wasing on ceiling/ walls surfaces complete all as specified and directed.
50
-
-
M&L Preparation of new plastered surfaces wall Applying two coats of cement based paint over and including a coat of primer of any description, complete all as specified.
450
-
-
M&L Preparation of new plastered surfaces wall applying two coat of OBD over a coat of alkali resistant priming paint complete all as specified and directed.
100
-
-
M&L Glazed ceramic coloured tiles 450 x 300 mm x 7/8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as dado including 10mm thick 1:3 backing coat including taking down existing tile and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
260
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and Joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size exc 0.09 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as directed.
110
-
-
Note for item No 98 & 99 :- The manufacturer's test certificate of Tiles must be submitted for approval by the concerned authority prior to installation.
-
-
-
M&L in repairs Granite work (of any type) 18 to 20mm thick (table rubbed and polished including round edge) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
40
-
-
Excavating in post holes (or similar holes) in any type of soil, each not exc 0.5 cum, getting out in hard dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.
50
-
-
M&L PCC 1:4:8, type D-2, using 40mm graded stone aggregate in foundation filling and mass concrete etc complete all as specified and as directed.
10.77
-
-
M&L Cement concrete type C2 1:3:6 (40mm Aggregate) in foundations, filling and mass concrete in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) etc complete all as specified and as directed.
4.35
-
-
M&L Pre painted Coloured Galvalume roofing system sheet 0.50 mm thick having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws including dismantling of existing one all complete all as directed.
300
-
-
M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dimantling of existing one all as directed.
28
-
-
Note for pre-painted coloured Galvalume roofing :-
-
-
-
(i) The manufacturer's test certificate and individual test certificate for the chemical and mechanical properties of sheet must be submitted for approval by the concerned authority prior to installation.
-
-
-
(ii) The contractor shall ensure that no leakages take place from the roof. The roofing shall be Coloured Galvalume roofing system (olive green colour or as approved by GE) with feed material manufactured from 0.50 mm Total coated thickness (TCT), minimum 550 MPa yield strength and shall conform to the physical specifications of IS: 2062 of 2011, coated with hot dip metallic Aluminium / Zinc alloy coating AZ150 as 150 gm/sq.mt total on both sides complete all as specified and as directed.
-
-
-
(iii) The painting shall be coloured baked enamel polyester with silicon coating of film thickness 25 microns nominal on the exposed face/exterior side and on the reverse side ( interior face) shall be white with 15 microns film thickness, over a coat of 5 micron nominal thickness Primer.
-
-
-
(iv) The contractor shall produce purchase vouchers for each lot and independent test for verification of Engineer-in-Charge.
-
-
-
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 gradeSt.-240) including dismantling existing one complete all as specified and as directed.
1250
-
-
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted , bolted or welded attachment.(Fe 410 -W (Gde- E-250) quality -A complete including dismantling existing one all as specified and as directed.
180
-
-
S&F in repairs MS flat iron wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc. , and similar work conforming to Fe-290 Gde E-165 complete all including dismantling existing one as specified and as directed.
110
-
-
M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n exc 5cm long diameter of neck 5 to 10mm including taking down existing one complete all as specified and as directed.
50
-
-
S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat etc. including taking down existing one complete all as specified and directed. Note: Minimum thickness of powder coating 50 micron.
20
-
-
S & F Powder coated aluminium door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each doors, hinges anodised aluminium snap beading screws etc including taking down existing one complete all as specified and directed. Note:-Glazing and particle board work shall be measured and paid seperately.
8
-
-
S & F 9mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame including taking down existing one complete all as specified and as directed.
4
-
-
S & F Figured glass and glazing, 5.0 mm thick with oil putty in squares not exceeding 0.5 Sq.m in each pane, with glazing clips and oil putty, including taking down existing one complete all as specified and directed.
4
-
-
S & F Mortice lock brass 4 levers vertical type of size 75mm fixed as including taking down existing one all as specified and directed.
4
-
-
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel covert governing pivot made of brass, other parts made of mild steel heavy duty including taking down existing wire cloth all as specified and directed.
15
-
-
S&F Aluminium extruded section body door closer hydraulically regulated,designation No.3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kg and fixed including taking down existing one complete as directed by Engr-in-charge.
10
-
-
Taking down chowkhat or frame(wooden/steel) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.
21
-
-
Taking down chowkhat or frame(wooden/steel) exceeding 1.50 Sqm not exceeding 4.0 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.
5
-
-
Taking down shutters of any description exc 1.0 Sq.m and n.exc 2.0 Sq.m each complete all as specified and directed.
19
-
-
M & L Cutting holes in stone wall exc half brick and n.exc one brick in cement mortar for inserting hold fasts/lugs and making good dismantled portion in cement mortar 1:3 or 1:2:4 type B-1 concrete as required complete all as specified and as directed.
30
-
-
S&F MS work (flat iron) 25mm x 3mm thick, in small articles such as hold fast and similar small articles conforming to Fe 290 Gde E-165 including taking down existing one complete all as directed.
10
-
-
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified .
80
-
-
S&F Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified.
35
-
-
M&L Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
0.25
-
-
Supply and fixing 200 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed.
60
-
-
Supply and fixing in repairs 200 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed.
10
-
-
Supply and fixing 100 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed.
20
-
-
Supply and fixing in repairs 100 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed.
10
-
-
S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete all as specified and as directed.
15
-
-
S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete including taking down existing one all as specified and as directed.
25
-
-
S&F 200mm extruded aluminum alloy handles, fabricated type, anodised complete all as specified and as directed.
30
-
-
S&F 200mm extruded aluminum alloy handles, fabricated type, anodised including taking down existing one complete all as specified and as directed.
20
-
-
Refixing of shutters of any description n.exc 1.0 sqm each, in same opening including taking down, petty repairs etc complete all as specified and directed.
15
-
-
Refixing of shutters of any description exc 1.0 sqm but not exc 2.0 sqm each, in same opening including taking down, petty repairs etc complete all as specified and directed.
15
-
-
Supply and Fixing 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panels, comercial type on both faces complete all as specified and directed.
20
-
-
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete including taking down existing one all as specified and directed.
60
-
-
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed.
10
-
-
Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete all as specified and as directed.
45
-
-
Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, fixed in repair to wooden frame/welded to metal frame complete all as specified and directed.
20
-
-
S&F Butt hinges 75 mm long medium weight cold rolled stainless steel complete all as specified and as directed.
75
-
-
Supply and fixing in repairs butt hinges 75 mm long medium weight cold rolled stainless steel complete all as specified and as directed.
20
-
-
S&F Factory made 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); all as specified and directed.
10
-
-
M & L Preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
64
-
-
Note for item No 147 :-
(a) All synthetic enamel paint, plastic emulsion paint shall be of 1st quality manufactured by the standard firms of make as specified.
-
-
-
(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.
-
-
-
(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE.
-
-
-
(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite)
-
-
-
(e) Unless otherwise specified the tints of paint shall be as approved by the GE
-
-
-
(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.
-
-
-
(g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge.
-
-
-
(h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.
-
-
-
S & F Aluminum handles cast type anodised 150 mm long complete all as specified and as directed.
60
-
-
Supply and fixing in repairs aluminum handles cast type anodised 150 mm long complete all as specified and as directed.
15
-
-
S&F 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
15
-
-
S&F in repairs 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
25
-
-
S&F 250mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminum alloy and fixed complete all as specified and as directed.
15
-
-
Supply and Fixing in repairs 250mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminum alloy and fixed complete all as specified and as directed.
10
-
-
M&L PVC (SWR) floor trap 75mm dia of outlet pipe, plain with grating including jointing with solvent cement including taking down existing damaged one complete all as specified and as directed.
30
-
-
M&L 100mm thick, plain cement concrete (1:3:6), type C-2 (using 40 mm graded mechanically crushed stone aggregates), as in plinth protection/path/hardstanding including making joints @ 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement including demolition of existing damagd cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness and rubish material shall be disposal to out side MD land complete all as specified and as directed.
250
-
-
S&F in repair 32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
20
-
-
S&F 18/19mm thick Prelaminated particle board, interior Grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete including taken down existing one complete all as specified and as directed by Engineer-in-Charge
100
-
-
S&F Brass 4 lever cupboards locks grade I size 65 mm complete all as specified and as directed by Engineer-in-Charge
25
-
-
S&F Brass 4 lever cupboards locks grade I size 65 mm complete including taken down existing one complete all as specified and as directed by Engineer-in-Charge
60
-
-
S&F Stainless steel cutlery basket of size 530 x 505 x 100 mm Including taking down the existing one complete Make : Butterfly or equivalent make as per list of makes in PS)
25
-
-
S&F Stainless steel handles of size 150 mm of approved pattern and make suitable for Base/Wall unit of modular kitchen Including taking down the existing one complete (Make : Spykar or equivalent make as per list of makes in PS)
80
-
-
S&F Stainless steel spring hinges of size of approved pattern and make suitable for base/wall unit of modular kitchen Including taking down the existing one complete (Make : BIR SS or equivalent make as per list of makes in PS)
150
-
-
S&F Stainless steel plain basket of size 530 x 505 x 100mm Including taking down the existing one complete. Make : Butterfly or equivalent make as per list of makes in PS
20
-
-
S&F Stainless steel bottle basket of size 200x 508x 431mm B35e. Make : Butterfly or equivalent make as per list of makes in PS
20
-
-
S&F Stainless steel thali basket of size 600x 500x 100mm Including taking down the existing one complete Make : Butterfly or equivalent make as per list of makes in PS)
20
-
-
S&F Magnetic catches with 8mm dia steel ball and brass body and striking plate including letting in repairs complete all as specified and directed.
30
-
-
S&F Stainless steel telescopic slider of 500 mm of approved pattern and make suitable for drawer in base unit of modular kitchen including taking down the existing one complete all as specified and directed.
120
-
-
S&F Brass continuous(Piano)hinge 30mm widthof flap, bright finish of electrolyte complete all as specified and as directed by Engneer-in-Charge
20
-
-
S&F Brass continuous(Piano)hinge 30mm widthof flap, bright finish of electrolyte Including taking down existing one complete all as specified and as directed by Engneer-in-Charge
20
-
-
M&L Vitrified Ceramic tiles 10 mm thick, LIGHT shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 15 mm thick in Cement Mortar 1:6 including dismantling existing tile and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
380
-
-
M&L Vitrified Ceramic tiles 10 mm thick, LIGHT shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including back coat of 10 mm thick in Cement Mortar 1:4 including taking down existing tile and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
39
-
-
S & F 4mm thick plain sheet glass Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one sideand glazed with oil putty or fixed with fillets 2nd class hard wood/steel/aluminium of sectional area glass not exc 0.5 sqm each pane complete all as specified and directed.
48
-
-
M&L 100 mm thick Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate ) as in sub base , fillng and mass concrete or as in receiving tiles/ surface channels and drains etc including demolition complete all as specified and directed.
368
-
-
M&L Chequered cement concrete tiles 30cmx30cmx25mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) including demolishing the existing tile complete all as specified and directed
Note : The manufacturer's test certificate and individual test certificate for tiles must be submitted for approval by the concerned authority prior to installation/fixing.
168
-
-
M&L Cleaning and Removing silt, grit , mud and other materials from covered drain in foul condition including removing materials from the site to outside MD land including necessary removing cover slabs and replacing after cleaning complete area including making good any damages complete all as specified and as direct
160
-
-
S&F Wall mounted Shower Arms 190mm long flat shape for wall mounted shower with flange including taking down complete all as specified and directed (Make :CAT Part No-SHA-483 of Jaguar or equivalent make of parriware /hindware
14
-
-
S&F in repairs Overhead Shower ø120mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System In repairs complete all as specified and as directed. (Make :CAT Part No- OSH-1709 of Jaguar or equivalent make of parriware /hindware
14
-
-
M&L providing PCC 1:2:4 type B1 using 20mm graded stone aggregates as in roof or in any position to bring upto the slope of average thickness of 50 mm including complete all as specified and directed.
100
-
-
S&F 25mm dia mild steel powder coated drapery rod out to length required without joint in between and fixed at openings including taking down existing one complete as directed by Engr-in-ch
150
-
-
S&F Mild steel powder coated brackets for holding the drapery rod and fixed to wall with MS screw including taking down existing one complete as directed by Engr-in-charge.
100
-
-
Supply and Fixing in repairs Mild steel powder coated fancy type brackets fixed at both the end of drapery rod of same colour and type of drapery rod as directed.
100
-
-
Demolition of brick work masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and as directed.
15
-
-
Brickwork with fly ash’ bricks using with modular bricks, straight or curved on plan exc 6m mean radius built in cm 1:4 , complete all as specified and as directed
50
-
-
Description all as per item No 193 here in above but except bricks. Note:Serviceable bricks obtained from Sl item No 192 be reused.
3
-
-
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, cesspits, manholes, pier holes, etc. and getting out in hard/dense soil complete all as specified and as directed.
25
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed.
6
-
-
Removal of excavated material to a distance exceeding 1.50 Km and not exceeding 5.00 Km and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
19
-
-
Dismantling existing cement concrete on roof and removal to a distance exc 1.5 KM but not not exc 5 KM and deposited as directed.
1
-
-
M&L Plain cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in roof kerbs, benching rounded or chamfered on edge all as specified complete all as directed.
1
-
-
M&L Reinforced precast cement concrete in 1:2:4 type B0 (using12.5mm graded stone aggregate) in Jallies, 45mm thick (measured solid) including all moulding but excluding frame set in CM 1:6 including taking down existing damaged one complete all as specified and as directed. Note: Reinforcement will be measured and paid separately.
80
-
-
M&L Reinforced Cement Concrete 1:2:4, Type B1 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed.
3
-
-
M&L High strength corrosion resistant TMTsteel bar of grade Fe-500 , 6 mm dia to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
200
-
-
M&L High strength corrosion resistant TMTsteel bar of grade Fe-500, 5 mm dia to 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips in stirrups , spacers and binders etc complete all as specified and directed.
400
-
-
M&L Rendering 15 mm thick in two layers on brick or concrete surfaces,first coat 10mm thick in cement mortar 1:6 and 2nd coat 5mm thick in cement mortar 1:6 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete complete all as specified and directed.
300
-
-
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid dry Laid, or laid bedded or pointed complete all as specified and directed
25
-
-
M & L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, laid over complete all as specified and as directed by Engr-in-Charge.
200
-
-
M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
10
-
-
M&L Hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface including removal of existing complete all as specified and directed.
30
-
-
Demolition of cement concrete (reinforced) in of any description and in any position and removal of debris out of MD land complete all as specified and directed.
3
-
-
M&L Precast RCC 1:2:4, Type B–1 using 20mm graded stone aggregate as in landings, cover slabs, chullah hoods, Chajjas, water troughs, mangers, Shelves and similar articles with plain faces including formwork, set in cement mortar 1:4 complete all as specified and as directed.
3
-
-
M&L for loose filling with broken bricks of gauge 40 to 80mm in soakage pits, soakage wells complete all as specified and as directed.
10
-
-
Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and as directed.
12
-
-
Excavating over areas, exc 1.5 m but not exc 3 m deep in any type of soil and getting out complete all as specified and as directed.
8
-
-
M&L RCC 1:1½:3 Type B-1 using 20mm graded stone agg. as in roof slab complete all as specified and as directed.
1
-
-
M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work: not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and directed.
15
-
-
M&L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for rough finished surfaces of concrete complete all as specified and directed.
10
-
-
M&L Preparation of new plastered surfaces and applying two coat of white wasing on ceiling surfaces complete all as specified and directed.
50
-
-
M&L Preparation of new plastered surfaces wall applying two coat of OBD over a coat of alkali resistant priming paint complete all as specified and directed.
200
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%