Military Engineer Services Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date25 Sep 2024
Closing Date23 Oct 2024
Tender Amount₹ 49,50,000
Costs
EMD
₹ 99,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Repair/ Maint Of Internal Electrification Fittings, Fixture, Main Distributing Boards, Bldg Earthing, Internal Electric Supply Services And Other E/m Works In Omq, Otm Accn And Technical Area (except Lca)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_676633_1Bid Award Id
ViewTender No
8700/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Removing excavated materials not exceeding 50m distance and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed.
24
-
-
Riddling Sand obtained from excavation for cable protection 8cm under the cable and 15cm above the cable in trench and get the thick layer of 18cm after ramming complete all as specified and directed. Note :- In case sufficient sand not obtained from excavation, the quoted rate is deemed to be inclusive for the required additional qty obtain from out side MD land as directed by the Engineer-in-Charge.
56
-
-
M&L Fly ash bricks using modular bricks as in cable protection cover including taking down existing bricks of any size complete all as specified and directed.
5600
-
-
Supply and lay XLPE insulated,screened ,PVC Bedded, galvanised steel strip of wire armoured, electric power cable heavy duty with aluminium condutor, multi strand, 1100Volts grade cross sectional area 6 Sqmm 2 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets etc including taking down existing cable all as specified and directed.
600
-
-
Supply and lay XLPE insulated,screened ,PVC Bedded, galvanised steel strip of wire armoured, electric power cable heavy duty with aluminium condutor, multi strand, 1100Volts grade cross sectional area 10 Sqmm 2 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets etc including taking down existing cable all as specified and directed.
200
-
-
Supply and lay XLPE insulated,screened ,PVC Bedded, galvanised steel strip of wire armoured, electric power cable heavy duty with aluminium condutor, multi strand, 1100Volts grade cross sectional area 16 Sqmm 4 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets etc including taking down existing cable all as specified and directed.
200
-
-
Supply and lay XLPE insulated,screened ,PVC Bedded, galvanised steel strip of wire armoured, electric power cable heavy duty with aluminium condutor, multi strand, 1100Volts grade cross sectional area 25 Sqmm 4 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets etc including taking down existing cable all as specified and directed.
200
-
-
M & L repair/ maintenance and making the continuity of supply for rectifying the defects including taking down defective electrical items such as light point, fan/exhaust fan point, call bell point, socket point 5A/15A, switches, sockets, regulator, lamp holder, brackets, bell, buzzer, push button, ceiling rose, pendent, any type of MCB's, SPN DB's any type of internal light fixtures, any type of lamp, metal clad plug top, capacitor, replacement of fuse wires and all elcectrical accessories in day to day/door to door maintenance including reconnection with S&F small pieces of elctrical cable of size upto 6 sqmm single core and length not exceeding 0.50m complete all as specified and as directed.
3370
-
-
Note:- following shall be part of job under item No 11:-
-
-
-
(a) The above job shall be carried out by a trained electrician having ITI in electrical, documentary proof of the education of tradesman shall be produced before commencement of work.
-
-
-
(b) All bldg light complaints including service connection, submain & internal electric for entire Tech area of AF Stn sulur shall be attended.
-
-
-
(c) Record of complaints/complaint slip showing qtr No, bldgs No, nature of job supported with users signature shall be prepared as per format directed by Engr-in-charge & will be deposited to concerned JE E/M within 24 hrs.
-
-
-
(d) Necessary complaints slip/complaints register & other stationary required shall be contractor responsibility.
-
-
-
(e) All sort of petty T&P items such as PVC insulation table, ladder, galvanised screws, nuts, bolts, washers etc. required to accomplish the job shall be provided by the contractor with out any extra cost to dept.
-
-
-
(f) Defective items if any, required to be replaced shall be measured and paid as supply only separately, however labour component shall be part of this item.
-
-
-
(g) The contractor shall maintain a record of all urgent/ routine works and if the work is repeated due to poor workmanship, he will be liable to repair the same without any extra expenditure to the Govt.
-
-
-
(h) In case of any delay in attending the complaint more than 12 hrs after handing over routine/urgent complaints, the contractor shall be liable to pay the penalty as described in penalty clause given here as under.
-
-
-
(j) The penalty shall be applicable to the contractor if the delay is noticed by the Engr-in-Cahrge more than twelve hrs after handing over works of urgent/ routine nature to the contractor. The Engr-in-Charge shall handover the slip containing specification of work to the contractor by lodging the time and signature of contractor be obtained on slip. The contractor shall attend the complaint immediately and shall report to Engr-in-Charge with in 12 hrs. The contractor will keep his tradesmen in stand by for attending any routine / urgent works from the executive. If the nature of job is such that the work cannot be completed within period of 12hrs then the facts shall be brought to the notice of the GE/Engr-in-Charge and the period for the working to the complaint shall be decided by the GE/EIC. If the delay is more then twelve hrs period and the GE is not satisfied with the reason for delay then penalty at the rate of Rs 50/- per job shall be deducted from the dues of the contractor. Please note that this penalty is exclusively other then the condition 56 of IAFW - 2249 and shall be treated as interim condition of the contract and shall be enforce above as and when delay in individual job is noticed and no claim whatsoever on this account shall be entertained by the Deptt.
-
-
-
(k) The decision of the Accepting Officer in this regard shall be final and binding.
-
-
-
Supply and fix switch piano flush type 5 Amps 240 volts single pole one way complete all as specified and directed.
600
-
-
Supply and fix switch piano flush type 5 Amps 240 volts single pole two way complete all as specified and directed.
20
-
-
Supply and fix switch piano flush type 15 Amps 240 volts single pole one way complete all as specified and directed.
150
-
-
Supply and fix shuttered socket outlet 3 pin 5 Amps, flush type complete all as specified and directed.
150
-
-
Supply and fix shuttered socket outlet 2 in 1, 5 pin, 5 and15 Amps complete all as specified and directed.
100
-
-
Supply and fix switch socket combination out let 3 pin 5 amps, flush type complete all as specified and directed.
200
-
-
Supply and fix switch socket combination out let 5 in 1, 5 pin, 5 and 15 amps, flush type complete all as specified and directed.
150
-
-
Supply and fix Ceiling rose 3 plates flush type 6 Amps,250 volts AC ISI marked, complete all as specified and directed.
70
-
-
Supply and fix lamp holder, insulated body, cord grip pattern SP 230 volt, complete all as specified and as directed.
50
-
-
Supply and fix electronic fan regulator 230 volts, step type socket type, hum free 100/240 watt complete all as specified and directed.
250
-
-
Supply and fix PVC gang box 1 way 05 ampcomplete all as specified and directed.
100
-
-
Supply and fix Electronic ballast for 36/40 W flourecent tube light fittngs, 230V, complete all as specified and directed.
Make : Sumo Slim EBE(Slim) 136 TLD 240 of Philips or equivalent of Bajaj/Crompton Greaves (CG)
50
-
-
Supply and fix in repair PVC insulated and FRLS PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, 1.5 sqmm of 3 core complete all as spcified and directed.
200
-
-
Supply and fix in repair PVC insulated and FRLS PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, 2.5 sqmm 3 core complete all as spcified and directed.
200
-
-
Supply and fix in repair PVC insulated and FRLS PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, 4 sqmm of 3 core complete all as spcified and directed.
100
-
-
Supply and fix in repair PVC insulated and FRLS PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, 6 sqmm 3 core complete all as spcified and directed.
100
-
-
Supply and fix starter for 40W flourecent tube light fittngs 1x40 /2x40 watts 230V complete all as specified and directed.
20
-
-
Supply and fix single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity conforming to IS 8828 of 1996 complete all as specified and directed.
250
-
-
Supply and fix electric bell, AC 230 volt, single pole Ding Dong type complete all as specified and directed.
70
-
-
Supply and fix LED bulb (Green/ Red colour) 15Watt B22 holder based complete all as specified and directed.
10
-
-
Supply and fix energy saving lamps 2W/3W/5W SUODI LIGHTING day light spiral type complete all as specified and directed. .
10
-
-
Supply and fix small thread LED candle bulb 05 watt, warm white E-14, 2700K as per sample complete all as specified and directed.
10
-
-
Supply and fix big thread LED candle bulb 05 watt, warm white E-27, 2700K as per sample complete all as specified and directed.
10
-
-
Supply and fix 7 watt LED lamp complete all as specified and directed.
100
-
-
Supply and fix plug top 3 pin 15 amps AC 230 volts complete all as specified and directed.
30
-
-
Supply and fix plug top 3 pin 5 amps AC 230 volts complete all as specified and directed.
20
-
-
Supply and fix bakelite sheet not less than 3 mm thick of size 100 x 100 mm complete all as specified and as directed.
15
-
-
Supply and fix TP, MCB 40 to 63 amp, 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 all as specified.
20
-
-
Supply and fix TPN, MCB 20 to 32 amp, 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 all as specified.
20
-
-
Supply only insulation tape 25 mm width 10m long
50
-
-
Supply and fix electronic LED driver 36W suitable for 2' x 2' ceiling light indoor fitting complete all as specified and directed.
50
-
-
Supply and fix PVC rectangular/square block 75mmx75mmx35mm complete all as specified and directed.
150
-
-
Supply and fix Electronic ballast for 2 x 36/40 W flourecent tube light fittngs, 230V, complete all as specified and directed. Make : Sumo Slim EBE 236 TLD 240 of Philips or equivalent of Bajaj/CG
10
-
-
Supply and fix 4' 20W/ 18W LED tube rod suitable for existing fitting complete all as specified and directed.
350
-
-
Supply and fix bell push complete all as specified and directed.
70
-
-
Supply and fix bell push, modular 1 way complete all as specified and directed.
10
-
-
Supply and fix Electronic ballast for 28W TL5 lamp flourecent tube light fittngs, 240V, complete all as specified and directed. Make : Sumo Slim EBE 128 TL5 240 of Philips or equivalent of Bajaj/CG
20
-
-
Supply and fix Electronic ballast for 1x18 W flourecent tube light fittngs, 230V, complete all as specified and directed.
20
-
-
Supply and fix PVC gang box 2 way 15 amp complete all as specified and directed.
50
-
-
Supply and fix bakelite sheet not less than 3 mm thick of size 200 x 250mm complete all as specified and as directed.
5
-
-
Supply and fix bakelite sheet not less than 3 mm thick of size 250 x 300mm complete all as specified and as directed.
5
-
-
Supply and fix electric buzzer, AC 230 volt, single pole complete all as specified and directed.
5
-
-
Supply and fix modular switch 1 way 6 amp.1 module complete all as specified and directed.
200
-
-
Supply and fix modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.
100
-
-
Supply and fix modular switch 1 way 16 amp.1 module complete all as specified and directed.
80
-
-
Supply and fix modular Socket, 16A - 3/5 pin combined 2 module complete all as specified and directed.
60
-
-
Supply and fix modular white cover plate with frame,3 module complete all as specified and directed.
40
-
-
Supply and fix modular white cover plate with frame,4 module complete all as specified and directed.
10
-
-
Supply and fix modular white cover plate with frame,6 module complete all as specified and directed.
10
-
-
Supply and fix modular white cover plate with frame,8 module complete all as specified and directed.
10
-
-
Supply and fix modular white cover plate with frame,12 module complete all as specified and directed.
10
-
-
Supply and fix modular switch 1 way, 32 Amp, 2 module, complete all as specified and directed.
2
-
-
Supply and fix in repair rigid, non-matalic, PVC conduit pipe, ISI marked, 32 mm bore, including bends, saddles, accessories complete all as specified and as directed.
100
-
-
Supply and fix in repair rigid, non-matalic, PVC conduit pipe, ISI marked, 25 mm bore, including bends, saddles, accessories complete all as specified and as directed.
200
-
-
Supply and fix switch socket combination outlet 3 in 1/ 3 pin 3 and 5 amps flush type with box complete all as specified and as directed.
200
-
-
Supply and fix switch socket combination outlet 5 in 1/ 5 pin 5 and 15 amps flush type with box complete all as specified and as directed.
150
-
-
Supply and fix Double pole MCB 40 amp, 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 all as specified
50
-
-
Supply and fix in repair PVC batten of 15 mm (width) complete all as specified and directed.
50
-
-
Supply and fix in repair PVC batten of 20 mm (width) complete all as specified and directed.
200
-
-
Supply and fix in repair PVC batten of 25 mm (width) complete all as specified and directed.
200
-
-
Supply and fix TPN, MCB 40 to 63 amp, 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 complete all as specified and as directed.
30
-
-
Supply and fix 9 watt LED lamp complete all as specified and directed.
100
-
-
Supply and fix 4 pin 18 watt CFL complete all as specified and as directed.
50
-
-
Supply and fix 4 pin 36 watt CFL complete all as specified and as directed.
300
-
-
Supply and fix PVC gang box 2 way 05 amp complete all as specified and as directed.
70
-
-
Supply and fix bakelite sheet not less than 3 mm thick of size 175 x 100mm complete all as specified and as directed.
5
-
-
Supply and fix bakelite sheet not less than 3 mm thick of size 200 x 200mm complete all as specified and as directed.
5
-
-
Taking down carefully hanger lights for repair/ replacement of defective spare parts such as ballast, lamp holders, lamp, capacitor, ignitor etc of capacity 150/250/400 watts HPSV/HPMV/MH including cleaning internally and externally fixing back the fitting in same position after repair and test complete all as specified and as directed.
300
-
-
Supply and fix ignitor suitable for HPSV/ HPMV/ MH fitting of wattage 150/ 250/ 400 watts complete all as specified and as directed.
10
-
-
Supply and fix high wattage metal halide lamp in elliptical / tubular shape of 400 watts complete all as specified and as directed.
5
-
-
Supply and fix 33 mfd capacitor suitable for HPMV/ HPSV/ MH light fitting complete all as specified and as directed.
10
-
-
Supply and fix Mercury / Metal Halide lamp ballast with copper winding polyster filling and voltage taping at 220/240V for 400 W HPMV fittings complete all as specified and as directed. Make:- Cat Part No BHL 400 X 261 of Philips or Bajaj/ Crompton Greaves
2
-
-
Supply and fix 20 mfd capacitor suitable for HPMV/ HPSV/ MH light fitting complete all as specified and as directed.
10
-
-
Supply and fix Mercury / Metal Halide lamp ballast with copper winding polyster filling and voltage taping at 220/240V for 250 W HPMV fittings complete all as specified and as directed.
Make:- Cat Part No BHL 250 X 261 of Philips or equivalent in Bajaj/ Crompton Greaves
2
-
-
Supply and fix high wattage metal halide lamp in elliptical / tubular shape of 250 watts complete all as specified and as directed.
2
-
-
Supply and fix electronic LED driver 70/75W suitable for hangar down light/ flood light fitting of make philips/ Wipro/ Bajaj/ CG/ Havells & indoor fitting of make Philips/ Luker/ Wipro/ Bajaj as directed by Engineer-in-Charge.
10
-
-
Supply and fix electronic LED driver 150/160W suitable for hangar down light/ flood light fitting of make philips/ Wipro/ Bajaj/ CG/ Havells & indoor fitting of make Philips/ Luker/ Wipro/ Bajaj as directed by Engineer-in-Charge.
50
-
-
Supply and fix electronic LED driver suitable for flame proof light fitting 150/160W sun shelter down light/ flood light fitting of make Sudhir/Baliga/CG complete all as directed by Engineer-in-Charge.
10
-
-
Supply and fix in repair on distribution board MCCB four pole, 125 Amp ultimate breaking capacity 16 KA complete conforming to IEC -61439-1 complete all as specified and as directed.
2
-
-
Supply and fix metal clad switch socket triple pole and earth enclosure with three pin and earth plug with socket complete with on triple pole 32 Amps, 415 Volts MCB complete all as specified and as directed.
4
-
-
Supply and fix metal clad switch socket triple pole and earth enclosure with three pin and earth plug with socket complete with on triple pole 63 Amps, 415 Volts MCB complete all as specified and as directed.
2
-
-
M&L for Sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed to wall/floors along with one run of 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.
Note :-
(a) 2 runs of 4 sqmm cable along with 1 run of 4 sqmm cable for earth conductor and one run of PVC casing capping shall be measured as one length.
(b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
150
-
-
M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 6 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed to wall/floors along with one run of 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.
Note :-
(a) 2 runs of 6 sqmm cable along with 1 run of 6 sqmm cable for earth conductor and one run of PVC casing capping shall be measured as one length.
(b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
200
-
-
M&L Sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 4 runs of 10 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed to wall/floors along with two runs of 10 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring all as directed.
Note :-
(a) 4 runs of 10 sqmm cable along with 2 runs of 10 sqmm cable for earth conductor and one run of PVC casing capping shall be measured as one length.
(b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
50
-
-
M&L Sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 4 runs of 10 sqmm drawn through in and incl suitable size non metalic PVC conduit and all accessories fixed to wall/floors along with Two runs of 10 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring all as directed.
Note :-
(a) 4 runs of 10 sqmm cable along with 2 runs of 10 sqmm cable for earth conductor and one run of PVC Conduit shall be measured as one length.
(b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
50
-
-
Supply and fix in repair convetional type post top fitting with LED Post tops lamp fitting 1x45 W LED made die cast aluminium with innovative glare free indirect lighting ditribution & IP 65 protection inlcuding fixing arrangement with suitable flanged GI pipe base and PCC fixed on floor/ground all as specified and directed. Make : CG Cat No. LPTO-40-CDL/Bajaj Cat Part No. BRIL 45 W LED NW or equivalent in philips.
2
-
-
Supply and fix in repair 18 watt recess mounted sleek square down lighter enviornment friendly, new generation, energy saving with high power LED as light sources & clear glass inlcuding accessories all as specified and directed by Engr-in-Charge. Make /Model : Philips cat part No.DN 295B LED16S-6500 PSU WH/Wipro/ Bajaj.
10
-
-
Supply and fix in repair factory made powder coated distribution board VTPN, 8 way double door including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB all as specified and conforming to IS: 8623 complete all as specified and as directed.
1
-
-
Supply and fix in repair factory made powder coated distribution board VTPN, 4 way double door including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB all as specified and conforming to IS: 8623 complete all as specified and as directed.
1
-
-
Supply and fix in repair factory made powder coated distribution board VTPN, 12 way double door including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB all as specified and conforming to IS: 8623 complete all as specified and as directed.
2
-
-
Supply and fix in repair factory made powder coated distribution board TPN, 4 way double door including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB all as specified and conforming to IS: 8623 complete all as specified and as directed.
2
-
-
S&F in repairs Electronic energy meter single Phase 5 to 30Amps range capacity complete all as specified. Note :- Old unserviceable meter shall be deposited to E/M store yard.
2
-
-
M&L for wiring for circuit complete submain wiring with 2 X1.5 sqmm single core PVC insulated, unsheathed FRLS 100 Volt grade multi stranded copper conductor cable drawn through and incl suitable dia rigid PVC conduit and accessories complete fixed surface to wall/roof/ceiling etc and incl one run of 1.5 sqmm single core wire PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc including taking down existing sub main wiring of any size and all as specified.
Note :-(a) 2 runs of 1.5 sqmm cable along with 1 runs of 1.5 sqmm cable for earth conductor and one run of PVC Conduit shall be measured as one length.
(b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
400
-
-
M&L for Sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and incl suitable size PVC Conduit and all accessories fixed to wall/floors along with one run of 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.
Note :-(a) 2 runs of 4 sqmm cable along with 1 runs of 4 sqmm cable for earth conductor and one run of PVC Conduit shall be measured as one length.
(b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
150
-
-
M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 6 sqmm drawn through in and incl suitable size PVC conduit and all accessories fixed to wall/floors along with one run of 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.
Note :-(a) 2 runs of 6 sqmm cable along with 1 runs of 6 sqmm cable for earth conductor and one run of PVC Conduit shall be measured as one length.
(b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
150
-
-
M&L for Sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and incl suitable size steel conduit and all accessories fixed to wall/floors along with one run of 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.
Note :-(a) 2 runs of 4 sqmm cable along with 1 runs of 4 sqmm cable for earth conductor and one run of steel Conduit shall be measured as one length.
(b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
50
-
-
M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 6 sqmm drawn through in and incl suitable size steel conduit and all accessories fixed to wall/floors along with one run of 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.
Note :-(a) 2 runs of 6 sqmm cable along with 1 runs of 6 sqmm cable for earth conductor and one run of steel Conduit shall be measured as one length.
(b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
50
-
-
Supply and fix in repair factory made powder coated distribution board SP & N 8 way double door, including bus bar, Neutral bar, standard DIN rail, earth bar complete all as specified and conforming to IS: 8623 complete all as specified and as directed.
4
-
-
Supply and fix in repair factory made powder coated distribution board TPN, 4 way single door including bus bar, Neutral bar, standard DIN rail, earth bar complete all as specified and conforming to IS: 8623 complete all as specified and as directed.
1
-
-
Supply and fix in repair of convetional type boolard fitting with LED bollard light fittings suitable for 1x9 watt LED bollard in rectangular shaped vicotria design with opal acrylic diffuser and IP 65 protection inlcuding fixing arrangement with suitable flanged GI pipe base and PCC fixed on floor/ground all as specified and directed. Make /cat part No. CG cat no.LBLSN-10-CDL /Bajaj Cat Part No. BGBOS 600 9W LED /philips.
2
-
-
Supply and fix in repair on distribution board MCCB four pole, 100 Amp ultimate breaking capacity 16 KA complete conforming to IEC -61439-1 complete all as specified and as directed.
2
-
-
Supply and fix in repair integrated LED bulk head luminarie fittings in engineering plastic housing with clear prismatic /opal diffuser /pressure aluminium die cast housing in white powder coating minimum IP-65 protection, system wattage not more than 10 watt (lumen output not less than 800 lumen) power factor more than 0.9, with surge protection device minimum 2KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, glarefree, 0 UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sqmm. Make : Wipro Cat part NO.LW07-4-XXX-57-G1 or equivalent in Philips Wipro/ Bajaj.
15
-
-
S&F in repairs Electronic energy meter 3 Phase 30 to 60Amps range capacity complete all as specified and as directed.
Note :- Old unserviceable meter shall be deposited to E/M store yard.
2
-
-
M&L for sub main wiring with PVC insulated unsheathed FRLS 1100 volts grade multi stranded copper conductor cable 4 runs of 6 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed to wall/floors along with 2 runs of 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.
Note :-(a) 4 runs of 6 sqmm cable along with 2 runs of 6 sqmm cable for earth conductor and one run of PVC Casing capping shall be measured as one length.
(b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
100
-
-
Supply and fix in repair factory made powder coated distribution board SP & N 4 way double door, including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB all as specified and conforming to IS: 8623 complete all as specified and as directed.
4
-
-
Supply and fix in repair factory made powder coated distribution board SP & N 2 way single door, including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB all as specified and conforming to IS: 8623 complete all as specified and as directed.
2
-
-
Supply and fix in repair on distribution board MCCB four pole, 63 Amp ultimate breaking capacity 16 KA complete conforming to IEC -61439-1 complete all as specified and as directed.
2
-
-
Supply and fix in repair 5 watt LED lamp complete all as specified and directed.
20
-
-
Supply and fix in repair indoor decorative extruded aluminium anodised housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED T8 batten type luminaire (LED batten shall be prewired box type) retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 2 feet (appx) size, high efficiency electronic driver, system wattage 10 watt (lumen output not less than 1000 lumen), power factor more than 0.9, with surge protection device minimum 3KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CRI more than 80, glarefree, no UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sqmm complete all as specified and directed. Make : Philips Cat part No.LHEXACP7IN1W00 or equivalent in Wipro/ Bajaj
70
-
-
Taking down aluminum/copper point wiring on & including hard wood battens, surface conduit and board/ blocks etc or through conduits for light, socket or power point, fan point complete (Taking down of fittings such as switches, sockets, bells, ceiling rose, holders , regulators, light fittings, MCB, lamps etc shall be measured and paid seperately) and making good the disturbed plaster surfaces of wall, floor, ceiling and painting 2 coat of white wash/distamber to meet the existing surface and removing materials and debris to reinstate the premise neat and clean complete all as specified and directed.
386
-
-
M&L point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade ISI 694 marked cable for phase & neutral drawn through concealed PVC Conduit, ISI marked with and including new MS/ cast iron sunken boxes duly painted with two coats of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side, covered with 3mm thick plastic laminated sheet for mounting switches, regulators, sockets etc including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed. Note:(a) Switches, sockets outlets, blanking plate, Light fittngs, fans, bells & regulators will be measured and paid for separetely. (b) Connection of wire with switch, socket shall be through copper thumble (lugs) only.
-
-
-
One light point/fan/bell point controlled by one switch
40
-
-
All as per item No. 133 here in before but for one 3 pin socket out 5 amp on the same board
5
-
-
All as per item No. 133 here in before but for one switch socket outlet 3 pin 5 Amps on independent board
15
-
-
All as per item No 133 above but Wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently
10
-
-
M&L point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through PVC casing Caping with and including new MS/ cast iron sunken boxes duly painted with two coats of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side, covered with 3mm thick plastic laminated sheet for mounting switches, regulators, sockets etc including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed. Note:(a) Switches, sockets outlets, blanking plate, Light fittngs, fans, bells & regulators will be measured and paid for separetely. (b) Connection of wire with switch, socket shall be through copper thumble (lugs) only.
-
-
-
One light point/fan/bell point controlled by one switch
80
-
-
All as per item No. 138 here in before but for One 3 pin socket out 5 amp on the same board
8
-
-
All as per item No. 138 here in before but for one switch socket outlet 3 pin 5 Amps on independent board
40
-
-
All as per Sl No 138 above but Wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently
20
-
-
M&L point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through medium grade open Steel conduit with and including new MS/ cast iron sunken boxes duly painted with two coats of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side, covered with 3mm thick plastic laminated sheet for mounting switches, regulators, sockets etc including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed. Note:(a) Switches, sockets outlets, blanking plate, Light fittngs, fans, bells & regulators will be measured and paid for separetely. (b) Connection of wire with switch, socket shall be through copper thumble (lugs) only.
-
-
-
One light point/fan/bell point controlled by one switch
30
-
-
All as per item No. 143 here in before but for One switch socket outlet 3 pin 5 Amps on independent board
15
-
-
All as per Sl No 143 above but Wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently
15
-
-
Supply and Fixing in replacement indoor decorative extruded aluminium anodised housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED T8 batten type luminaire (LED batten shall be prewired box type) retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 4 feet (appx) size, high efficiency electronic driver, system wattage 20 watt (lumen output not less than 2000 lumen), power factor more than 0.9, with surge protection device minimum 3KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CRI more than 80, glarefree, no UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sqmm complete all as specified and directed. Make : Philips Cat part No.LHEXBLP7IN1W020 or equivalent in Wipro/ Bajaj
200
-
-
M&L for point wiring complete with 1.5 sqmm single core PVC insulated, unsheathed fire retacable 1100 volts grade, multi stranded with copper conductor drawn through and incl PVC casing caping with accessories in wall/roof/ceiling etc incl MS modular terminal boxes, concealed surface to walls covered with modular plates with cover etc and 1.5 sqmm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified for
Note: (a) Switches, sockets outlets, blanking plate, Light fittngs, fans, bells & regulators will be measured and paid for separetely).
(b) Connection of wire with switch, socket shall be through copper thumble (lugs) only.
-
-
-
One light point/fan/bell point controlled by one switch
25
-
-
All as per item No. 148 here in before but for One 3 pin socket out 5 amp on the same board
5
-
-
All as per item No. 148 here in before but for one switch socket outlet 3 pin 5 Amps on independent board
15
-
-
All as per Sl No 148 above but Wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently
10
-
-
M&L point wiring complete with 1.5 sqmm single core PVC insulated, unsheathed fire retacable 1100 volts grade, multi stranded with copper conductor drawn through and incl PVC Conduit with accessories in wall/roof/ceiling etc incl MS modular terminal boxes, concealed surface to walls covered with modular plates with cover etc and 1.5 sqmm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly complete all as specified and as directed. Note: (a)Switches, sockets outlets, blanking plate, Light fittngs, fans, bells & regulators will be measured and paid for separetely.
(b) Connection of wire with switch, socket shall be through copper thumble (lugs) only.
-
-
-
One light point/fan/bell point controlled by one switch
25
-
-
All as per item No. 153 here in before but for One 3 pin socket out 5 amp on the same board
5
-
-
All as per item No. 153 here in before but for one switch socket outlet 3 pin 5 Amps on independent board
15
-
-
All as per Sl No 153 above but Wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently
8
-
-
Supply and fix in repair switch piano flush type 5 Amps 240 volts single pole one way complete all as specified and directed.
233
-
-
Supply and fix in repair switch piano flush type 15 Amps 240 volts single pole one way complete all as specified and as directed.
45
-
-
Supply and fix in repair shuttered socket outlet 3 pin 5 amps, flush type complete all as specified and as directed.
83
-
-
Supply and fix in repair shuttered socket outlet 2 in 1, 3 pin, 5 and15 amps complete all as specified and as directed.
45
-
-
Supply and fix in repair modular switch 1 way 6 amp.1 module complete all as specified and directed.
90
-
-
Supply and fix in repair modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.
40
-
-
Supply and fix in repair modular switch 1 way 16 amp.1 module complete all as specified and as directed.
18
-
-
Supply and fix in repair modular Socket, 16A - 2/3 pin combined 2 module complete all as specified and as directed.
18
-
-
S&F Surface & wall mounted LED fitting including 5 watt LED tube rod complete with all accessories internally, pre-wired, connecting up with twin core twisted flexiable copper conductor cable of suitable size including taking down old light fitting complete all as specified and as directed. Make : Philips Cat part No.LHEXBLP7IN1W005 or equivalent in Wipro/ Bajaj
150
-
-
M&L for sub main wiring with PVC insulated unsheathed FRLS 1100 volts grade multi stranded copper conductor cable 4 runs of 4 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed to wall/floors along with 2 runs of 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.
Note :-
(a) 4 runs of 4 sqmm cable along with 2 runs of 4 sqmm cable for earth conductor and one run of PVC Casing capping shall be measured as one length.
(b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
100
-
-
Supply and fixing in repairs pathway light decorative retrofit LED fitting with 9 W LED bulb including necessary excavation, PCC foundation, 1.5 mtr long GI pipe light grade 50 mm bore with base plate, cable junction box with 2 pole connector 32 A capacity including cable entry and exist knockouts, 1.5 mtr length 3 core 1.5 sqmm PVC insulated copper round cable from connector to light fitting, disposal of soil to outside MD land including taking down existing one all as specified and directed by Engineer-in-Charge. Make / Model of Light fitting : Athena 2 Prismatic of Havells Cat Part No : LHDC12115099 or equivalent in Wipro or CG.
6
-
-
S&F 36 W LED recessed 2x2 luminaire with classic design & glare free soft illumination. Housing with white high reflection powder coated (RAL9016) CRCA sheet. Glare free, Opal diffuser for symmetrical light distribution fixed in separate CRCA sheet frame held in with housing by screws for easy maintenance. High efficiency long life LED package in integral module with lumen efficacy of 100 lm/w, viewing angle of 100° to ensure better uniformity. Powered by an independent Isolated, SELF Output electronic LED driver (SMPS based constant current supply) efficiency of 85% with built-in Surge protection 3Kv. System Lumen Output of 3000 lumens. CRI 80, Color temperature5700±300K, THD 10% and PF 0.95, IP20, IK02.Life class of 50,000 hrs @ L70, Operating Temperature: -10 TO +45 DEG.C; Input Supply Voltage Range:150-277 V, Frequency :50-60 HZ. Driver Safety requirement stds: IS 15885-2-13, Test Report to be submitted complete all as specified and directed.
Make : Bajaj Cat Part No Skylux - BZRSQL 30W GZi WH / Philips cat No RC 355 BLED 33-6500 PSU OD WH or equivalent in Wipro.
30
-
-
Supply and fixing building security luminaire of watt 10 watt LED 1000 lumens light High power LED, with unique peanut lens to ensure uniform distribution, higher spacing between poles and maintenance free system with excellent thermal management including prewired complete all as specified and directed.
10
-
-
Supply and fixing building security luminaire of watt 20 watt LED 1000 lumens light High power LED, with unique peanut lens to ensure uniform distribution, higher spacing between poles and maintenance free system with excellent thermal management including prewired complete all as specified and directed.
10
-
-
Supply and fixing electronic driver 10W suitable for bldg security light of make : Bajaj/ Philips all as directed by Engineer-in-Charge.
20
-
-
Supply and fixing electronic driver 20W suitable for bldg security light of make : Bajaj/ Philips all as directed by Engineer-in-Charge.
15
-
-
Supply and fix in repair LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed. Make : Luker cat pat No. LFL 100 or Equivalent of Havells/Wipro.
4
-
-
Supply and fix in repair LED flood light 150/160 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed. Make : Luker cat pat No. LFL 100 or Equivalent of Havells/Wipro.
10
-
-
Supply and fix in repair ALCOR LED flood light, 50 watts RGB colour changing light, 240 Volt, with high quality lenses & reflector, High grade aluminium pressure Die-Cast Housing with toughened glass cover, IP-66 class of protection, complete with control gear and all accessories including necessory PCC foundation for placing of flood light all as specified and directed.
Make : Luker cat pat No. LFLR 50 or Equivalent of Havells/Wipro.
2
-
-
Supply and fix in repair 9 watt surface mounted sleek square down lighter enviornment friendly, new generation, energy saving with high power LED as light sources & clear glass including accessories complete all as specified and as directed.
20
-
-
S&F in repairs Switch flame proof rotary type with termination box in LM6, 16A, double pole 250V complete all as specified and directed.
4
-
-
Supply and fixing in repairs LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.
2
-
-
S&F in repairs flame proof switch socket and plug combined in cable termination box in LM 6, 16 Amp, 250V, 2P+ earth complete all as specified and directed.
2
-
-
S & F industrial type metal clad plug top & socket single pole and nutral link earth enclosure with MCB SP 20 Amp complete all as specified and directed.
30
-
-
Supply and fix MCB SPN 32/40 Amps, 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity conforming to IS 8828 of 1996 complete all as specified and directed.
20
-
-
M&L Earthing with Galvanised Earth Plate Electrode 600x600x 6mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with Galvanised Earth Strip of size 25x6mm (upto 7.5m length) by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar including GI 40mm bore (dia) light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt, Magneisum Sulphate (1 : 1 : 0.5) in alternate layers of not exc 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) medium grade including necessary Excavation in any type of soil, Returning, Filling in and Removal of surplus Spoil disposal to out side MD land and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including taking down old unserviceable one, complete all as per specified and as directed.
10
-
-
Note for Item here in above :-
(a) All Joints should be joined by Exothermic Welding or Brazing.
-
-
-
(b) After completion of work earthing shall be tested by the contractor in presence of Engineer-in-Charge, User and proper record shall be maintained duly signed by all concerned.
-
-
-
(c) Earth resistance tester shall be provided by the contractor. It should be caliberated from authorised company/ lab.
-
-
-
(d) After testing if desired earth resistance of less than 5 Ohm is not obtained, the earthing will be redone at no extra cost to Govt till desired result is obtained.
-
-
-
M&L in repairs Galvanised Earth strip of size 25 x 4 mm fixed on proper post insulator at the instrument end complete all as per specified and as directed.
40
-
-
Demolition of Brickwork/stone boulder masonry, built in cement mortar complete all as specified and as directed.
2
-
-
M&L Fly ash Brick work with Old size brick, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 complete all as specified and directed.
2
-
-
Taking down cement plaster on brick or stone walls, or concrete or ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed.
30
-
-
M & L Rendering 10 mm thick in cement mortar on brick or stone or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
47
-
-
M&L for applying two coat of oil bound distemper over one coat of putty including preparation of newly plastered surfaces complete all as specified and as directed.
47
-
-
Note for Item No 189 to 193:-
The above items are required for making good the disturbed surfaces of wall/ ceiling during execution of electrical repairs.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements