Hindu Religious Institutions And Charitable Endowments Tender

Cement concrete 1:5:10 (one cement, five m sand and ten aggregate) using 40mm gauge hard broken blue granite stone jelly for foundation and basement including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification and as directed by the departmental officers

Random Rubble masonry work in CM 1:4 ( One of cement and Four M-sand) Using selected stones and bond stones including cost of required wedgesin foundation and basement including dewatering wherever necessary proper setting, curing etc., complete in all respects complying with relevant standard Specifications.

Labour charges for Old Stone Fixing: Aswapadam, Sthamaba, Sthambam, Kalasam, Thadi, Kudam, Palagai, Veerakandam, Bodhiyal, Uthiram, Kambu, Eludham, Kabothagam, Viyalam, Koodu, Ull Vari, Pavukkal, Thun, Flooring, Nilaikal, Bodhiyal Thani, Uthiram. including all lifting charges etc.complete complying with standard specifications and as directed by the departmental officers.

Supply of new stone for carrying out walls pavukkal, kabothagam nialaikkal and etc including cost and conveyence etc.complete complying with standard specifications and as directed by the departmental officers.

upto 10' feet length

Above 10' feet length

Labour Charges for New Stone dressing and Fixing charges including all lifting charges etc.complete complying with standard specifications and as directed by the departmental officers.

Wall stones inner sides

Adhistanam

Ubapeedam

Paatham

Prastham

Pothigai

Prsathram

Kabothagam

Viyalavari

Pavukkal

Nilaikal

Thun

Bothiyal

Uthiram

Wall stone outer sides

Pointing with Cement mortar 1:2 ( one cement and two sand) including all labour charges, tools and plants neat finishing curing etc complete compling the standard specification.

Flooring with cut stone slab of size 600mmX600mm not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and labour charges for paving in existing sand bed and Pointing With Lime Mortor1:2 ( One lime and two sand ) etc complete compling the standard specification.

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work.

Upto 15' feet height

Upto 25' feet height

Brick masonry cement mortar 1:4 ( One cement and four of sand ) using II Class Table Moulded chamber burnt bricks of size 9"x41/2"x3" including all varivargams, mould sthambams mokopathrams, koodu, Nasi and all ornamental brick work complete, all pancharams Agarais, Karanakoodu, etc., forming core walls of Rajagopuram / Vimanam complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc.complete complying with standard specifications and as directed by the departmental officers.

Kalkaram Upto 15' feet for Sannathi

Kalkaram Upto 25' feet

Vimanam / Gopuram of height up to 15' feet (excluding kalkaram)

Vimanam / Gopuram of height up to 25' feet (excluding kalkaram)

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime Mortor1:4 ( One lime and four sand ) with special grinding with gallnut jaggary etc complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Lime Mortor1:1:5 ( One lime and one & half sand ) and finishing with final ornamental plastering and nayam theervai including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for kalkaram.gopurams 100sft superficial area. etc.complete complying with standard specifications and as directed by the departmental officers.

For kalkaram

Vimanam / gopuram of ht. Up to 15' feet excluding Kalkaram

Vimanam / gopuram of ht. Up to 25' feet excluding Kalkaram

Plastering with Cement mortar 1:5 (one part of cement and five part of sand) 12mm thick including cost and conveyance of all materials and all labour charges,curing etc,complete complying with standard specifications.

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 Kg/m3 and maximum water cement ratio of 0.55, including admixture ( Plasticiser/ Super Plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of Concrete, improve workability without impairing strength and durability with about (5 cu.m) 7730 Kg of 20mm machine crushed Stone Jelly and with about (3.30 Cu.m) 5156 Kg of 10-12mm machine crushed stone jelly and with about (5.79 cu.m) 7670 Kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc., and providing fixtures like fan clamps in the RCC floor/Roof slab wherever necessary without claiming extra complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregate to be used should comply with requirement of IS standards. ( No separate payment will be made by the Department for the excess usage of materials).

Supplying and erecting steel centering including necessary supports for plain surfaces, for all RCC works including strutting upto 3.29m in all floors using mild steel shutters of size 90cmx60cm of BG 10 stiffened with mild steel angles of size 25mmx 25mmx3mm laid over silver oak (Country wood) Joists of size 10cmx6.5cm spaced at about 90cm c/c and supported by casurina props of 10cm to 13cm dia. (spaced at 75cm c/c) etc., complete complying with standard specification and as directed by the departmental officers. (The centering will be removed after specified period of concrete without damaging the concrete)

Supplying, fabricating and placing in position of steel reinforcement using MS (or) RTS rods for all RCC item of works including cost of steel and binding wire in all floors etc., complete complying with standard specification and as directed and as per design given by the departmental officers.

Special ceiling plastering for R.C.C. slab beam and sunshades with Cement mortar 1:3 ( one cement and three sand ), 10mm thick including cost and conveyance of all materials and labour charges, curing etc. complete complying with standard specifications.

Painting two coat with approved water based Exterior Emulsion over the cement plastered wall surface, ceiling and other new surface with one coat priming coat with approved primer including clearing preparing the surface curing in all floors including brushes etc., complete as per specification.

Supplying & fixing Teak wood temple type door including all materials, labour charges for manufacturing and fixing in position including neccessary carving , shapping , wastages etc as per approved plan and design all furniture fittings etc complete with standard Specifications and as directed by the departmental officers.

Best Varnishing new and old wood work two coats of approved quality in all floors the rate includes cost of all materials, brushes scaffolding charges etc complete with standard Specifications and as directed by the departmental officers.

Weathering course concrete with broken jelly 20mm size and pure slaked lime over RCC roof slab, the proportion being 32:12.5 for required depth of 80mm for giving required slope and thickness of roof on required, well beaten with wooden beater etc complete with standard Specifications and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in lime Mortar 1:3 (One lime and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same lime mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Providing New sudhai vigrahams in the vimanams and Rajagopurams with galvanised iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in Lime Mortor 1:3 ( One lime and three sand ) finishing the same with Lime Mortor 1:3 ( One lime and three sand ) bringing to the correct shape (Lakshana) in conformift with silpa sastra inclusive of special ornaments, wiapons, peedam etc., complete and providing C.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and G.I. rods.binding wire all labour for working in heights, curing lifiting of materials etc., complete including cement painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted ) etc., complete complying with standard specification and as directed by the departmental officers

Brick work in Cement mortor 1:5 ( one cement and five sand ) mix using Country Bricks 83/4” x 41/4” x 23/4” including cost and conveyance of all materials and labour charges and all other incidental charges etc completc complying with standard specification.

Painting with multicolour (Panchavarnam) best quality water exterior Emulsion paints complete for the Vimanams/Gopurams, inculding cost and conveyence of all materials, labour charges inculding Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area. etc., complete complying with standard specification and as directed by the departmental officers

Electrical

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with Modular switch box and 5A 1Module switch in flush with wall with Cover Plate sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point/ fan point (for electronic regulator) (5 pts / coil) (Data-A)

Supply and fixing of single box type Lumiline "Passolite'' 4' 20W / 4' 40W LED Wall fitting complete on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting. (Data-B)

Supply and fixing of 1200mm sweep (48") AC ceiling fan High speed complete with stepped electronic 100W 2M regulator with 0.7M down rod on the existing clamp (Data C)

Supply and fixing of 450mm wall mounting fan light duty with necessary MS clamps and electrical connections complete. (Data-D)

Supply and fixing of 9W / 15W LED for BH point. (Data E)

Supply and fixing of 30W LED focus fitting complete on suitable MS angle with suitable MS clamp. (Data F)

Supply and run of MS angle with necessary clamping arrangements on the pillars with necessary accessories and painting as directed by the departmental officer. (Data G)

Supply and fixing of MS clamps of size 2' x 1' on pillar with suitable Bolt / nuts and painting of suitable colour. (Data H)

Supply and fixing of PVC Module junction Box on wall or on angle with required accessories. (Data I)

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour (SD 54)

Supply and run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour. (Data J)

Supply and fixing of 2 Module 6A 3 Pin Socket-3 Nos, lM 6A Switch - 3 Nos in 12Module Flush Box with cover Plate inflush with wall and connection (For Set plugs) (Data - K)

Supply and fixing of 2Module 16A 3 Pin Socket-1 No, lM 16A Switch - 1 No in 3M Flush Box with cover Plate inflush with wall and connection. (Data - L)

Supply and fixing of 1 x 30W LED street light fitting complete with 32 mm dia GI pipe (Class'B') with 1 No. 32 mm GI bend complete on the wall with PVC unsheathed copper leads MS clarnps and aluminium painting (Data M)

Supply and fixing of 2 x 30W LED street light fitting complete with 6 mtr 65 mm dia GI pipe (Class'B') with 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with 1 No. 32 mm GI bend pipe complete with concreting and masonary work for fixing the sintex box with PVC unsheathed copper leads in flexible green hose, MS clarnps and aluminium painting (Data N)

Supply and fixing of Sintex box inflush in the masonry work for the street light with 2 nos. of cable glands, 1 no. 15A surface type fuse unit, 1 no. 4 way Bakalite connector and with required accessories with electrical connections complete. (Data O)

Supply and clamping of 2 x 10 sq.mm PVC armoured LTUG Alu cable on post or on wall with MS Clamps. (SD 216)

Supply and fixing of brass cable gland for 2 x 10 sqmm PVC armoured LTUG cable with earth connection. (SD 182)

Supply and laying of 2 x 2.5 sq.mm PVC armoured LTUG Copper cable in exiting trench (Data P)

Supply of Duraline HDPE 90mm / 76mm DWC duct as per IS 16205 Part 2 for wherever necessary. (SR Pg No. 128, 5b)

Supply and fixing of FP MCB in sheet steel enclosure box with 1 no. 32A DP MCB and 2 nos. 10A SP MCB electrical connections complete. (Data Q)

Supply and fixing of 80W flood light with MS clamps and MS angle and electrical connections complete. (Data R)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure Distribution board with Double door(Metal) 1No. 32 Amps DP MCB as incoming and 10 Nos. 6 Amps to 32 Amps SP MCB outgoing in flush with wall or on suitable angle iron frame work and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Legrand make). (Data S)

Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door of double door type with metal door with IP42 protection with 40A 4 pole MCB isolator as incoming and 12 Nos. 6-32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark. (Data T)

Supply and fixing of 2 KVA 24V online sine wave inverter (Microtek / eql) with 2 no. of fully charged 12V, 150Ah tubular battery (Exide / eql) with necessary accessories, electrical connections complete as directed by the departmental officers. (Data U)

Design, Supply, Testing and commissioning of 10 Meters Mini mast lighting unit Bajaj / Philips make of ISI equivalent complete with hot dip galvinized and suitable for 45 Met / sec wind Velocily and above . The Mini mast structure should have hend hence . Single ring and provided with galvanized lantern carriage suitable for and with 4 Nos of 150W LED Luminaries with manual ladder arrangement with safety Rung & feeder pillar Box with Automatic timer system including wiring etc , complete as specified in the relevant ISS . (Approved by PWD)

Erection of the Mini Mast by providing Concreting 1 : 2 : 4 Mix R.C.C masonary foundation pedestal. The RCC pedestal projection should be 30 cms above the ground level. The feeder pillar box should also be mounted in RCC pedestal with projection of 30 cms above the ground level & foundation suitable to the safe bearing capacity of the soil at 12T / M2 at 1.5m depth of below ground level and necessary galvanized foundation bolts nuts washers and Anchor plate & Tmeplate etc. complete as per standard specification of IS -875-1987 . (Approved by PWD)

Supply and fixing of 63A FP changeover switch on suitable angle iron frame work with MS cable entry box with earth connection only (Data V)

Supply and fixing of TNEB powder coated meter box of 16 SWG suitable for 63A Three phase service connection with 32A fuse unit (500V) 32 A neutral link, 63A (30 mA) FP RCCB / ELCB and earth link (1" x 1/8" copper flat) on on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (Data W)

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD 68)

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains. (SD 73)

Supply, erection, commissioning and testing of 15 KVA Diesel generator with acoustic arrangements in accordance with CPCB norms, water / coolant oil cooled type engine with not less than suitable BHP for 15 KVA generator at 1500 rpm under NTP conditions with following specifications. The engine should have turbo charged, should be provided with air cleaner, base frame, crank case, lubricating oil, fan and fan drive, fuel and oil filters, flexible fittings, exhaust governor, hydro-mechanical gauges for fuel pressure and oil pressure, tachometer, digital water temperature gauge, charging arms, muffler, exhaust pump for fuel priming, fuel transfer, jacket with radiator engine oil, safety set ups with engine shutdown system for LLOP including the set of tools, spares as supplied by the manufacturer along with the Engine. The alternator should have brushless self-excited Y connected, self-regulated of continuous rating, developing an output of 12KW at 0.8 power factor lagging, 415 V, 3 phase, 50 Hz at 1500 rpm with a voltage regulation of ±1 % under steady state condition with over speed capacity of 10% for 5 minutes withstanding capacity with class H insulation, ingression protection of IP23 with topicalization. The alternator is to be designed, built & tested to IS, BS, IEC or any other equivalent Indian or International Standards.\ The engine should be provided with suitable electrical starting system including, suitable radiator arrangements with suitable fully charged new batteries and with other connecting accessories. microprocessor based genset controllers display and displayed at phase voltage & currents, Frequency, reverse Power, Genset KVA, KW, KWh, KVAr, power factor, canopy temperature, lube oil pressure, engine temperature, RPM, run hours, number of starts, fuel level, auto / manual stop, battery charge condition. The fuel tank should be fabricated with 14 SWG CRCA MS sheet steel inbuilt removable type sheet metal fuel tank with fuel gauge drain plug and fuel connections, fuel level indicator and with a capacity of not less than 50 Ltrs. Provisions are to be made to filter the sediments, water in the fuel at rear side and provision of vent at top to release the air pressure in the tank. The tank should be painted with noncorrosive and non-flammable paint. The fuel tank should be filled with a minimum level of fuel for test running on full load. (Make: Ashok Leyland / eql) (Data X)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233)

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection (SD 76)

Supply and run of 1 of No. 8 SWG hard drawn copper wire in suitable PVC pipe for earth connection. (Data Y)

SUB TOTAL

GST 18 %