Hindu Religious Institutions And Charitable Endowments Tender

Filling in the basement with the Gravel including cost and conveyance to the site and all labour charges for filling as per standard specifications

Plain Cement Concrete 1:5:10 (One cement, five sand and ten hard broken granite stone jelly) using 40mm HBG metel as foundation concrete including dewatering wherever necessary and laid in layers of not more than 15cm. thick complying with std specification.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). Foundation and Basement

a) Foundation & Basement

b) Ground Floor

Brick work in cement mortar 1 : 5(one cement and five sand) using country bricks of size 83/4"x43/8"x23/4" including cost and conveyance of materials and labour charges and all other incidental charges etc complete complying with std specification..

For foundation and basement

Brick work in cement mortar 1 : 6(one cement and six sand) using country bricks of size 83/4"x43/8"x23/4" including cost and conveyance of materials and labour charges and all other incidental charges etc complete complying with std specification..

Superstructure

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

a)Footing and Grade beam

b)For column

c)for beams and slabs

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Plastering with cement mortar 1: 5 (one cement and five sand) 12mm thick finished with neat cement including providing band cornice, ceiling cornice, curing scaffolding etc ., complete in all respects and complying with relevant std specifications.

Special Ceiling Plastering with cement mortar 1: 3 (one cement and three sand) 10mm thick for bottom of roof, stair, waist, landing and sunshade in all floors finished with near cement including hacking the areas providing band cornice, scaffolding, curing, finishing etc., all complete.

Special Ceiling Plastering with cement mortar 1: 3 (one cement and three sand) 10mm thick for bottom of roof, stair, waist, landing and sunshade in all floors finished with near cement including hacking the areas providing band cornice, scaffolding, curing, finishing etc., all complete.

Providing Weathering Course with Concrete broken brick jelly 20 mm guage in pure burnt lime stone and screened over RCC roof slab with proportion of brick jelly to lime being 32:12 1/2 by volumn well beaten with wooden beaters for giving the required slope and thickness complying with relevant std specifications and as directed by departmental officers.

Finishing the Top of Roof with one Course of machine Pressed Tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the Floor with Best Quality Anti Skid Tiles of any approved colour and size 300 mm x 300 mm x 8 mm shape and quality laid in Cement Mortor 1 : 2 to 20 mm thick in all floors and the Top Pointed with the white cement 0.40 kg mixed with the same colouring Pigments etc complete

Supplying and erecting pull and push type rooling shutter with ISI make of approved size and section using 18 GI shet . The Shutter shall be painted with one coat primer and rate is inclusive of hood covers, transpotation charges etc., (SOR Pg no 49)

Painting two coats with newly plastered wall surface with ready mixed plastic Emulsion Paint of first class Quality and of approved Colour over a priming coat incliding through Scapping,Clean removal of dirt ,and including necessesary plaster of paris putty, where ever required etc.,complete complying with standared specification.

Painting Two Coats with approved Exterior Emulsion over the Plastered surface over one coat of Primer paint including cost of all materials and labour charges etc complete

Painting Two Coats with Enamel Paint over the New Iron Work over one coat of Primer including cost of all materials and labour charges etc complete

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

ELE CTRIFICATION WORK

Wiring with 2X1.5 sqmm(22/0.3) PVC inslutated sc unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylem sheet covered TW switch box and 5A ft switch with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour. for pvc concealed light point / fan point.(for electronic regulator)(SD no 23)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD no 37)

Supply and fixing of single box type "Havells" 22 W 4' LED fitting LUMILINE + BS22W LED 865SPCS Wall fitting complete with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting. (DATA-D)

Supplying and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electrionic 300W regulator with one meter down rod on the existing clamp (SD 107)

Supplying and fixing of WT bluk head fitting with guard LED (Philips/Bajaj/Crompton/K.Lite) suitable for 11W CFL Lamp with CFl directed by the departmental officers.(SPL DATA)

Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No 32A DP MCB Isolator as incoing and 4 Nos. 6A to 32 A SPMCB out going in flush with wall and making good of the concealed portion with earth connection only (Make Legrand/Hager/Havells) (DATA-C)

Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD 198)

Supply and providing cable end termination of 2 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SPL DATA)

Supply and fixing of brass cable gland for 2X10 sqmm PVC LTUG aluminium armoured cable with earth connection (SD-192)

Earthen as per P.W.D standard with an earth electrode of 2 Mtr class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.(SD NO-234)

Supply and run of 1 of No.8 SWG GI wire for earth connection (SD 74)

Supply and run of 2 of 2.5 sq.mm. (36 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour (DATA-B)

Supply Erection Testing and commissioning of 415 V/50 Hz Cubicle panel board with centre switches chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1"x1/8" tinned copper flats for 3 phases and neutral and with 6mm hylem sheet separation of 3 phases and neutral and with synthetic molded insulators bus supports at equal intervals as per IS specification and 2 runs of 1" x 1/8" copper flat on rear side of the panel board fr earth buses with individual 10 chambers for EB meter and separate chamber for 32A DP 100m A RCD wotj omterma; cpmmectopm somg 4.0 sqmm Copper wire with individual 32A Rocker Fuse unit for EB service with necessary connection and fixing on wall with by 1 1/2 x 1 1/2 x 1/4 MS channel and painting with suitable color. (EB Panel ) (Data-A)

Supply and fixing of 1 x 48W LED type street light fitting complete with 32mm dia G.I Pipe (Class 'B') on the existing post /wall with PVC unsheathed copper leads MS clamps and aluminium painting (Havells /Philips or equivalent)(Data - E)

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall (sd - 114)

SUB TOTAL

GST 18 %