Hindu Religious Institutions And Charitable Endowments Tender

Vimanam upto 15'0 height

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat with approved premierincluding thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Restoration by providing herbal water wash(Combination of Venthayam powder 20%, Siyakai Powder 10%, Arapu powder 5%, Boonthi kottai powder 50%, Arugampul powder 3%, Nannari ver powder 3%, Vettiver powder 3%, Korai kizhangu powder 3%, and sembaruthi leaf powder 3% total 100%) are used for removel of lime wash on stone and oil smudge) and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc complete complying with standard specification and as directed by the departmental officers.

Pointing with Lime mortar 1:1.5 ( One Lime and one & half sand ) to restore the originalities of the existing granite structure including the changes of scaffolding arrangement if necessary with neat finishing including all tools and plants and labour for cut stone masonry.etc complete complying with standard specification and as directed by the departmental officers.

Removal of cement concrete floor clearing carefully away from site etc.,complete complying with standard specification and as as directed by the departmental officers.

Providing dressing the cutstone flooring and pointing with lime mortar 1:1.5( One lime ,one and half of sand) including all labour charges etc complete complying with standard specification and as directed by the departmental officers.

Supplying & Paving flooring with cut stone of size 600 mm X 600 mm and another sizes suitable for site conditions with machine cut edges three faces fully dressed and not less than 100mm thick and top surface dressed as directed by the departmental officers and pointing with special grinding lime Mortar 1:1.5 ( one lime and one & half M.sand ) including cost and conveyance of all materials etc., complete Complying with standard specifications. and as directed by the departmental officers

Removal of lime concrete top of roof clearing carefully away from site etc.,complete complying with standard specifications and as directed by the departmental officers.

Labour charges for removing the cut stone pavukkal of required size ,numbering and stacling carefully including scaffolding etc, complete complying with standard specification and as directed by the departmental officers.

Labour charges for refixing the cutstone pavukkal of required size including scaffolding ,hoisting,aliegning and fixing in position with lime mortar 1:1.5 ( One lime and one and half of sand )etc, complete complying with standard specification and as directed by the departmental officers.

Labour charges for removing the cut stone uthiram of required size ,numbering and stacling carefully including scaffolding etc, complete complying with standard specification and as directedd by the departmental officers.

Labour charges for refixing the cutstone uthiram of required size including scaffolding ,hoisting,aliegning and fixing in position with lime mortar 1:1.5 ( One lime and one and half of sand )etc, complete complying with standard specification and as directedd by the departmental officers.

Labour charges for removing the cut stone Bothiyal of required size ,numbering and stacling carefully including scaffolding etc, complete complying with standard specification and as directedd by the departmental officers.

Labour charges for refixing the cutstone Bothiyal of required size including scaffolding ,hoisting,aliegning and fixing in position with lime mortar 1:1.5 ( One lime and one and half of sand )etc, complete complying with standard specification and as directedd by the departmental officers.

Supplying of cutstone for new bothiyal required of size etc.,complete complying with standard specification and as directed by the departmental officers.

Pointing with Lime mortar 1:1.5 ( One Lime and one & half sand ) to restore the originalities of the existing granite structure including the changes of scaffolding arrangement if necessary with neat finishing including all tools and plants and labour etc all complete for cut stone masonry.etc complete complying with standard specification and as directed by the departmental officers.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete complying with standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality set in cement Mortar 1:3 (One lime and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Random Rubble masonry work in lime mortar 1:2 ( One of lime and two of M-sand) Using selected stones and bond stones including cost of required wedgesin foundation and basement including dewatering wherever necessary proper setting, curing etc., complete in all respects complying with relevant standard Specifications.

providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

For foundation and basement

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

for Grade beam

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brick work in lime Mortar1:2 (One lime ,two sand) using country brick of size 8 3/4" x 4-1/4" x 2-3/4" including curing, etc., complete complying with standard specifiction.and as directed by the departmental officers

Plastering with lime mortar 1:1.5 (One lime and one and half Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing mild steel grills for windows, ventilators, etc., including priming coat etc. complete complying with standard specification and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Ornamental Brick work in Lime Mortar 1:2 ( One lime and One & half sand ) using country bricks 8 3/4"X4 3/8"X2 3/4" all varivargams, moulds, sthambams, mukapathrams, koodu, nasi and all ornamental brick work complete, all pancharams, agarais, karnakoodus, etc., forming core walls of Rajagopuram/ Vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete kalkaram height : 15'0

Supplying & fixing well seasoned Teak wood Temple type ornamental door in various sizes and required height with 2'' minimum and 7'' maximum thick ornamental frames as per approved palns and design including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete complying with standard specifications and as directed by the departmental officials

Supplying & fixing of country wood rafters including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc. complete complying with standard specification and as directed by the departmental officers.

Roofing with mangalore tiled roof over flat tiles and set in lime mortar and including teak wood reepers of required thickness as directed including all materials, labour charges etc. complete complying with standard specification and as directed by the departmental officers.

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat with approved premier in all floors including the cost of primer etc., complete complying with standard specification and as directed by departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil)

Supply and fixing of 4'-20w crystal classes LED SBT fitting complete with on wall or cealing with pvc unsheated copper leads from terminals to the fitting with clamp

Supply and fixing of WT bluk head fitting with guard ( Philips/Bajaj/Crompton/K.Lite) suitable for 9W LED Lamp with CFI directed by the departmental officers

supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box

SUB TOTAL

GST 18 %