Hindu Religious And Charitable Endowments Tender

Pointing with special grinding Lime mortar 1:1.5 ( One of Lime and One and Half of M.sand ) using with required jaggers,galnut etc.,completewith neat finishing including all tools and plants and labour etc for cut stone masonry.etc complete complying with standard specification and as directed by the departmental officers.(The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.) (TNBP. Specification.No : 60)

Scraping the old plastering surface of vimanams/ wall carefully including isolated bricks or brick work without damaging the vari vargams, racking out the joints, cleaning the surfaces with water including all working in heights, hire charges for special tools, brushes etc complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : Special)

Restoration by providing herbal water wash(Combination of Venthayam powder 20%, Siyakai Powder 10%, Arapu powder 5%, Boonthi kottai powder 50%, Arugampul powder 3%, Nannari ver powder 3%, Vettiver powder 3%, Korai kizhangu powder 3%, and sembaruthi leaf powder 3% total 100%) are used for removel of lime wash on stone and oil smudge) and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : special)

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime Mortor1:1.5 ( One of lime and one & half of sand ) with special grinding with gallnut jaggary etc complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Lime Mortor1:1.5 ( One of lime and one & half of sand ) and finishing with final ornamental plastering and nayam theervai including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. etc.complete complying with standard specifications and as directed by the departmental officers. (TNBP. Specification.No : Special) (Height upto 25'0") (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)

Providing new sudhai vigrahams in the vimanams and Rajagopurams with Copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in special grinding lime morter 1:1.5 ( one lime ,one and half M.sand ) finishing the same with special grinding lime morter 1:1.5 ( one lime ,one and half M.sand ) bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing C.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including Exterior Emulsion painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder) etc., complete Complying with standard specifications. and directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.) (TNBP. Specification.No : Special)

Dismantling damaged existing compound wall brick work carefully away from site Brick / Stone Masonry in cement mortar walls under 3m high etc,complete complying with standard specifications and as directed by the departmental officers.(T.N.B.P.No:16&17)

Brick Work in Cement Mortar 1:5 (one of Cement and Five of M.sand) using best quality of II nd class table moulded Chamber burnt bricks of size 9"x4 3/8"x 2 3/4" including neat finishing curing etc., complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : 31-C)

Supplying & fixing best quality well seasoned Teak wood temple type ornamental door in verious sizes and required height with 2'' minimum and 7'' maximum thick ornamental frames as per approved palns and design including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete complying with standard specifications and as directed by the departmental officials (TNBP. Specification.No : similar to 72&74 )

Plastering with special grinding Lime Mortar1:1.5 (One of Lime and One and Half of Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.(The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.) (TNBP. Specification.No : 52&53)

Painting two coats of newly plastered wall surface withWater based Exterior emulsion paint of first class quality and of approved colour over a priming coat with approved primer including thorough scrapping, clean removal of dirt etc., and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality ,shade and colour of paint should be got approved by the Executive Engineer before use on works.) (TNBP. Specification.No : 66 & 66-A)

Painting with multi colour ( Panchavaranam ) using good water base exterior emulsion paint over a priming coat with approved primer etc., complete for the vimanam and gopuram for ornamental works including cost and conveyance of all materials labour charges including artist painter working in heights , lifting materials cost of brushes etc. which including allextra for foldingsetc complete complying with standard specification and as directed by the departmental officers all etc for folding 100 sft.( The brand ,colour,shade and quality of paint should be got approved by the Executive Engineer before use on works ) (TNBP. Specification.No : 66 & 66-A)

Painting two coats to new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat with approved premier in all floors including the cost of primer etc., complete complying with standard specification and as directed by departmental officers. (The make, quality ,shade and colour of paint should be got approved by the Executive Engineer before use on works.)(TNBP. Specification.No : 66&66-A )

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over with one coat of priming coat with approved primer in all floors etc., complete complying with standard specification. (The make, quality ,shade and colour of paint should be got approved by the Executive Engineer before use on works.)(TNBP. Specification.No : 66&66-A )

Supplying and filling in foundation, basement,below the cutstone flooring etc with filling crushed stone sand ( M.Sand) in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : 24&25 )

Supplying & Paving flooring with cut stone of size 600 mm X 600 mm and another sizes suitable for site conditions with machine cut edges Single line fully dressed and not less than 100mm thick and as directed by the departmental officers,and set in special grinding Lime morter 1:1.5 ( One of lime and One and Half of M.sand ) and pointing with special grinding Lime morter 1:1.5 ( One of lime and One and Half of M.sand ) including cost and conveyance of all materials etc., complete Complying with standard specifications. and directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 4&35 and special )

Earthwork excavation for foundation in all soils and sub soils to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, baling out water wherever necessary, refilling the foundation with excavated earth and depositing the surplus earth within compound in places shown by the departmental officers with an initial lead of 10 metre and initial lift of 2 metre and clearing and leveling the site etc., complete complying with standard specification and as directed by the departmental officers. SS20 B.(TNBP. Specification.No : 23)

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : 28)

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including neat finishing curing etc. complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : 56&57)

Supply and run of powder coated MS cable management Trunking system of size 50mm x 25mm with 1.6mm thickness with all accessoires complete (Data A1)

Wiring with 2x1.5 Sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in existing MS truf on wall and ceiling with accessories with module GI switch box on wall with 6A one way module switch with module front plate for PVC Light point / fan point (5 points / Coil) Higher End) (Data A2)

Wiring with 2x1.5 Sq.mm. PVC insulated core unsheathed FRLS copper conductor of 1100 V grade in existing MS truf on wall and ceiling with PVC accessiores with suitable module plastic surface mounting switch box on wall with 1 no. 6A one way module switch and 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of suitable colour with continous earth wire connection of 1.5 sq.mm copper wire for plug point (8 point / Coil) Higher End (Data A3)

Supply and fixing of 4' 20W LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end) (Data A4)

Supply and fixing of 450MM 18" Almonard Wall Fan with special clamp with accessories with connection (Data - A5)

Supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (Class B) with 1 no. 25 mm GI bend complete on the existing post/on wall with PVC unsheathed copper leads with MS clamps and with painting (SD 445)

Supply and fixing of 30W LED spot / focus light (Higher end ) with connection (Data A6)

Supply and fixing of 8" x 6" PVC synthetic box for street light (Data - A7)

Supply and Run of 2 of 2.5 Sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in existing MS truf on wall and ceiling with continious earth wire connection of 2.5 Sq. mm Copper wire (Data A8)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing on suitable angle 10m frame on wall with earth connection only. The MCB DB and MCB's should be with ISI mark. (SD 510)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1 No. 40A DP MCB isolator as incoming and 10 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. Lower End (SD 533)

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1 No. 63A 4P MCB isolator as incoming and 12 Nos. 6A to 32A SPMCB as outgoing on suitable angle iron frame on wall with earth connection only. Lower End (SD 570)

Supply and Laying of 2 x 4 sq.mm. PVC armoured LTUG copper cable in suitable sixe HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (Data A9)

Supplying and clarnping of 2 x 4 sq.mm. PVC LTUG armoured copper cable on post or on wall with MS clamps (Data A10)

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos.32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 no 40 AMp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection (SD 128)

Supply and fixing of 3 phase 32 A aerial fuse unit for 3 Nos. 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps (SD 135)

Supply and run of 4 x 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD 68)

Supply and run of 4 x 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains (SD 73)

Supply and fixing of 32A DP MCB with sheet steel enclosure on wall with earth connection (Higher end) (Data A11)

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary mansory work (SD 212)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD 371)

Supply and fixing of 32A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only (SD 148)

Sub Total

GST18%