Hindu Religious And Charitable Endowments Tender

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with stepped electronic 100W 2M regulator with 0.7M down rod on the existing clamp (Data C)

Supply and fixing of horizontal type 12 way triple pole neutral MCB sheet steel enclosure Distribution board with Double door (Metal) 1No. 32 Amps DP MCB as incoming and 10 Nos.6 Amps to 32 Amps SP MCB outgoing in flush with wall or on suitable angle iron frame work and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Legrand make). (Data S)

Supply and fixing of 2 KVA 24V online sine wave inverter (Microtek /eql) with 2 no. of fully charged 12V, 150 AH tubular battery (Exide / eql) with necessary accessories, electrical connections complete as directed by the departmental officers. (Data U)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable Powder coated MS duct with door arrangements on wall and ceiling with accessories with module GI switch box on wall with 6A one way module switch with module front plate for Open MS duct Light / fan point (for electronic regulator ) (5 point / Coil) Higher End (Data A)

Supply and fixing of FP MCB in sheet steel enclosure box with 1 no. 32A DP MCB and 2 nos. 10A SP MCB electrical connections complete. (Data Q)

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in special grinding Lime Mortar 1:1.5 (One of Lime and One & half of M.sand)12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers.(The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 44-H)

Supply and fixing of 30W LED focus fitting completer on suitable MS angle with suitable MS Clamp. (Data F)

Supply, erection commissioning and testing of 15 KVA Diesel generator with acoustic arrangements in accordance with CPCB norms, water / coolant oil cooled type engine with not less than suitable BHP for 15 KVA generator at 1500 rpm under NTP conditions with following specifications. The engine should have turbo charged, should be provided with are clearner, base frame, crank case, lubricating oil, fan and drive, fuel and oil filters, flexible fitting, exhaust governor, hydro-mechanical gauges for fuel pressuree and oil pressure, Tachometer, digital water temperature gauge, charging arms, muffler, exhaust pump for fuel priming, fuel transfer, jacket with radiator engine oil, safety set ups with engine shutdown system for LLOP including the set of tools, spares as supplied by the manufacturer along with Engine. The alternator should have brushless self-excited Y connected, self-regulated of cotinuous rating, develping an output of 12 KW at 0.8 power factor lagging, 415 V, 3 phase, 50Hz at 1500 rpm with a voltage regulation of (+ or -) 1% under steady state condition with over class H insulation, ingression protection of IP23 with topicalization. The alternator is to be designed, build & tested to IS, BS, IEC or any other equivalent Indian or International Standards. The engine should be provided with suitable electrical starting system including suitable radiator arrangements with suitable fully charged new batteries and with other connecting accessories. Microprocessor based genset controllers display and displayed at phase voltages & currents, Frequency, reverse Power, Genset KVA, KW, KWh KVAr, power factor, canopy temperature, lube oil pressure, engine temperature, RPM, run hours, number of starts, fuel level, auto/manual stop, battery charge condition. The fuel tank should be fabricated with 14 SWG CRCA MS sheet steel inbuilt removable type sheet metal fuel tank with fuel gauge drain plug and fuel connections. fuel level indicator and with a capacity of not less than 50 Ltrs. Provisions are to be made to filter the sediments, water in the fuel at rear side and provision of vent at top to release the air pressure in the tank. The tank should be painted with noncorrosive and non-flammable paint. The tank should be filled with a minimum level of fuel for test running on full load. (Make: Ashok Leyland / eql) (Data X)

Cement Concrete 1:5:10 (One of Cement, Five of crushed stone sand and Ten of hard granite broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : 28 )

Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door of double door type with metal door with IP42 protection with 40A 4 pole MCB isolator as incoming and 12 nos. 6-32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark. (Data T)

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / support on wall / floor / ground for earth connection. (SD 76)

Supply and fixing of TNEB powder coated meter box of 16 SWG suitable for 63A Three phase service connection with 32A fuse unit (500V) 32 A neutral link, 63A (30 mA) FP RCCB / ELCB and earth link (1" x 1/8" copper flat) on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (Data W)

Erection of the Mini Mast by providing Concreting 1:2:4 Mix R.C.C mansory foundation pedestal. The RCC pedastal projection should be 30 cms above the ground level. The feeder pillar box should also be mounted in RCC pedestral with projection of 30 cms above the ground level & foundation suitable to the safe bearing capacity of the soil at 12T/M2 at 1.5m depth of below ground level and neccessary galvanized foundation bolts nuts washers and Anchor plate & Template etc. complete as per standard specification of IS -875 -1987. (Approved by PWD)

Earhthing as per the ISI spescification with an earth electorde of 2.10 meter Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x6mm with necessary funnling arrangements with necessary mansory work and with 38mm RCC cover slab for the brick mansory. (SD 233)

Supply and run of 2 of 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and celling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour (SD 54)

Supply and fixing of 63A FP changeover switch on suitable angle iron frame work with MS cable entry box with earth connection only (Data V)

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains. (SD 73)

Design, Supply, Testing and commissioning of 10 Meters Mini mast lighting unit Bajaj / Philips make of ISI equivalent complete with hot dip galvinized and suitable for 45 Met / sec wind Velocily and above. The Mini mast structure should have hend hence. Single ring and provided with galvanized lantern carriage suitable for and with 4 Nos of 150W LED Luminaries with manual ladder arrangement with safety Rung & feeder pillar Box with Automatic timer system including wiring etc., complete as specified in the relevent ISS. (Approved by PWD)

Height upto (15'-0")

Pointing with lime mortar 1:1.5 ( one of lime and one and half of M. sand) with special grinding lime mortar including all labour charges, tools and plants neat finishing curing etc complete compling the standard specification.(The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 60 & special )

Supply and fixing of 2 Module 6A 3 Pin Socket - 3 Nos, 1M 6A Switch - 3 Nos in 12Module Flush Box with Cover Plate inflush with wall and connectioc (For Set plugs) (Data - K)

Supply and fixing of 450mm Wall mounting fan light duty with necessary Ms clamps and electrical connections complete. (Data C)

GST 18 %

Supply and fixing of 2x30 W LED Street Light fitting complete with 6 mtr 65 mm dia GI pipe (Class'B') with 300mm x 300mm x 6mm MS base plate, duly welded at eh bottom with 1 No. 32mm GI bend pipe complete with concreting and mansory work for fixing the sintex box with PVC unsheathed copper leads in flexible green hose, MS clarnps and aluminum painting (Data N)

Supply and run of 1 of No.8 SWG hard drawn copper wire in suitable PVC pipe for earth connection. (Data Y)

Providing Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn/PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work. etc complete complying with standard specification and as directed by departmental officers. (TNBP. Specification.No : Special)

Supply and fixing of MS clamps of size 2' x1' on pillar with suitable Bolt / nuts and painting of suitable colour. (Data H)

Painting two coats to new wood work with two finishing coats of synthetic enamel ready mixed paint of approved first quality and colour over one coat priming coat with approved premier in all floors including the cost of primer etc., complete complying with standard specification and as directed by departmental officers. (The make, quality ,shade and colour of paint should be got approved by the Executive Engineer before use on works.)(TNBP. Specification.No : 66&66-A )

Supply and clamping of 2x10 sq.mm PVC armoured LTUG Alu cable on post or on wall with MS clamps. (SD 216)

Providing new sudhai vigrahams in the vimanams and Rajagopurams with Copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in special grinding lime morter 1:1.5 ( one lime ,one and half M.sand ) with special grinding lime mortar with galnut,jaggaryadded with 20% of galnut (for sudhai work) finishing with the same with special grinding lime morter 1:1.5 ( one lime ,one and half M.sand ) bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing C.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including Exterior Emulsion painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder) etc., complete Complying with standard specifications. and directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.) (TNBP. Specification.No : Special)

Supplying and filling in foundation, basement, etc with filling crushed stone sand ( M.Sand) in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : 24&25 )

Supply and fixing of 80 W flood light with MS clamps and MS angle and elcetrical connections complete. (Data R)

Height upto 25'--0"

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection. (SD 182)

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete Complying with standard specifications. and directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 44 )

Painting with multi colour ( Panchavaranam ) using good water base exterior emulsion paint over a priming coat with approved premeir etc., complete for the vimanam and gopuram for ornamental works including cost and conveyance of all materials labour charges including artist painter working in heights , lifting materials cost of brushes etc. which including allextra for foldingsetc complete complying with standard specification and as directed by the departmental officers all etc for folding 100 sft.( The brand ,colour,shade and quality of paint should be got approved by the Executive Engineer before use on works ) (TNBP. Specification.No :special and similar to 66 & 66-A)

Supplying and fixing mild steel grills for windows, ventilators, etc., including priming coat etc., complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : 86 & 86-A)

Painting two coats of new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with of best approved first quality and colour of synthetic enamel paint over with one coat of priming coat with approved primer in all floors etc., complete complying with standard specification. (The make, quality ,shade and colour of paint should be got approved by the Executive Engineer before use on works.)(TNBP. Specification.No : 66&66-A )

Supply and fixing of PVC Module junction Box on wall or on angle with required accessories. (Data I)

Restoration by providing herbal water wash(Combination of Venthayam powder 20%, Siyakai Powder 10%, Arapu powder 5%, Boonthi kottai powder 50%, Arugampul powder 3%, Nannari ver powder 3%, Vettiver powder 3%, Korai kizhangu powder 3%, and sembaruthi leaf powder 3% total 100%) are used for removel of lime wash on stone and oil smudge) and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : Special)

Height upto (50'-0")

Dismantling and clearing carefully The Brick wall in lime mortar /Cement Mortar away., etc complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : 16&17)

Supply and fixing of 9W/15W LED for BH point. (Data E)

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD 68)

Supply of Duraline HDPE 90Mm / 76mm DWC duct as per IS 16205 Part 2 for wherever necessary. (SR Pg No.128,5b)

SUB TOTAL

Painting two coats of newly plastered wall surface withWater based Exterior emulsion paint of first class quality and of approved colour over one coat of priming coat with approved primer a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.(The make ,quality, Shade and colour of paint should be got approved by the Executive engineer before use of work)(TNBP. Specification.No : similar to 66&66A)

Height upto (25'-0")

Supply and run of 2 of 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SwG TC wire with painting of suitable colour. (SD 413)

Supplying & Paving flooring with cut stone of size 600 mm X 600 mm and another sizes suitable for site conditions with machine cut edges and not less than 100mm thick and Single line fully dressed stone as directed by the departmental officers,and set in special grinding Lime morter 1:1.5 ( One of lime and One and Half of M.sand )using freshly burnt lime (cao not less than 75 %)with jaggaery,galnut as directed and pointing with special grinding Lime morter 1:1.5 ( One of lime and One and Half of M.sand ) including cost and conveyance of all materials etc., complete Complying with standard specifications. and directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 4&35 and special )

Brick Work in Cement Mortar 1:5 (one of Cement and Five of M.sand) using best quality of country bricks of size 8 3/4"x4 1/4"x 2 3/4" including neat finishing curing etc., complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : 31-C)

Supply and fixing of single box type Lumiline "Passolite" 4'20W/4'40W LED Wall fitting complete on wall or ceiling with PVC unshethed Copper leads from terminals to the fitting. (Data B)

Earthwork excavation for foundation in all soils and sub soils to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, baling out water wherever necessary, refilling the foundation with excavated earth and depositing the surplus earth within compound in places shown by the departmental officers with an initial lead of 10 metre and initial lift of 2 metre and clearing and leveling the site etc., complete complying with standard specification and as directed by the departmental officers. SS20 B.(TNBP. Specification.No : 23 )

Supply and fixing 1 x 30W LED street light fitting complete with 32 mm dia GI pipe (Class 'B') with 1 No.32 mm GI bend complete on the wall with PVC unsheathed copper leads MS clamps and aluminium painting (Data M)