Forest Department Tender

Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.

Forest Department Tender

Works
Eprocure
Opening Date26 Dec 2024
Closing Date9 Jan 2025
Tender AmountRefer Documents 
Notes
Download

Costs

Summary

Establishment Of Biodiversity Museum And Conservation Centre At Kmtr

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Plain Cement ConcreteCement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

684

-

-

... More
Reinforced Cement Concrete Providing and laying in position, standardised concrete Mix M20 Grade in accordance using 20mm with IS:456-2000, and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/ms and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). M 20

442

-

-

... More
Centering Works Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

3219

-

-

... More
Reinforcement Works Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

39.44

-

-

... More
Providing, febracting and applying of Ferrocement work for structure like slab, column, beam etc., in CM 1:2 with mini. 100mm thick, mini. 6mm dia. reinforced and stirrups covered with chicken mesh with all required binding wire, shuttering, scaffolding, supports etc. and all side plastered to finish. Etc., complete. Including necessary protection during work to other structural members, walls, floor etc. and clean after complition of work as per given drawings, specification and as directed by engineer in charge.

2435

-

-

... More
Brickwork Brick work in following Cement Mortar using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

-

-

-

... More
For Foudndation & Basement

3

-

-

... More
For Ground Floor

392

-

-

... More
R.R.Masonry in Cement mortar 1 : 5 for Foundation and

502

-

-

... More
Basement (New stone)

-

-

-

... More
Plastering Works

-

-

-

... More
Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

1382

-

-

... More
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

1971

-

-

... More
Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

2661

-

-

... More
Flooring Works Paving the floor with best approved quality fine polished

-

-

-

... More
Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

-

-

-

... More
Pitch Black Color Granite Stone (Polished)

8

-

-

... More
Providing & Fixing of White China Mosic as per given design with chemical adhesive upto 2 mm thick layer over floor including providing and applying epoxy grout of approved shade / colour for groove joints as directed by the project manager. The rates shall be for all, levels, lead and lift any other area as directed as per pattern in drawings and instructed by Project Manager.

336

-

-

... More
Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

2508

-

-

... More
Doors & Windows

-

-

-

... More
Supplying and fixing of Wooden Panel With Vertical Grooves shutters with both sides polish finished on all edges with necessary adhesive and C.P.Screws, including fixing of aldrops, tower bolts, hinges and lock strike plates, putty, fevical, varnish, for T.W. lipping thinner colouring agent etc, and aluminium anodised 125mm size hinges 3 nos best quality of aluminium anodised fittings of 200mm, tower bolt 1 no 150mm tower bolts 1 nos, 250mm aldrops 16mm dia rod 1 no 125mm long handle 2 nos shall be provided. The rate is inclusive cost of fevical and fixing charges, transportation, loading, unloading and all other incidental charges handling charges etc., complete complying with standard specification. The sample of materials and fittings should be got approved by the Engineer-in-charge before use on works. (Single leaf)

48

-

-

... More
MS Plate with laser cut section Supplying and fixing of 4mm. thk MS plate with lazer cut design as per the design drawing finished clean with two coats of dark grey colour synthetic enamel paint over a coat of Zinc chromate primer, etc. complete, as directed.

48

-

-

... More
Supplying and fabrication and fixing in position of galvenize Dark Grey colour matt finish wire mesh fix type window with required frameing work in all floors with necessary accessories including all required for fabrication etc., complete. Necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers and in accordance with ISI specification.

79

-

-

... More
Structural Steel Works

-

-

-

... More
Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

133637.7

-

-

... More
Painting works

-

-

-

... More
White washing three coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directedby the departmental officers.

3342

-

-

... More
Letter Works

-

-

-

... More
Letter (18" Height)

30

-

-

... More
Letter (6" Height)

27

-

-

... More
Gravel

-

-

-

... More
Gravel

2

-

-

... More
CT Metering Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. 1set of 200/5A CT with TNEB Metering provision and 1nos of 200/5A CT for APFCR . (Rate as per Quotation)

1

-

-

... More
200A Isolator Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of 200A TPN MCCB panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors. (Rate as per Quotation)

1

-

-

... More
Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel made up of 2mm powder coated MCCB Indoor Type Three Phase Changer Over panel of size (H 1450 X L 1400 X D 400 ) mm with suitable to accommodate 200A 4 pole Three phase Change Over Switch1No. as incomer for EB Source and as incomer for DG Source , 1no 160A 4Pole MCCB, 6nos of 125A 4Pole MCCB, and 2nos of 63A 4Pole MCCB's, compartment for as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 33x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost of Weldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S

1

-

-

... More
Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating one no. 4 pole incoming 63 A TPN MCB, 10kA, / Isolator and another separate 4 way for accommodating one no. 63 Amps, 30 mA, 4 pole ELCB / RCD (totally 8 ways in one segment) and 24 nos 6-32 A, 10kA, SP MCB / Isolators ( totally 24 nos.) for outgoing in 3 segments with label holder and provision for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. (SD 716)

3

-

-

... More
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 25A FP ELCB switch as incoming and 4 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End ( SD-594)

1

-

-

... More
Supply and Fixing of 40W 4' LED Tube Light with PVC unsheathed copper leads from terminals to the fitting. (Make : Philips/Crompton/Havelles ) (SD-526)

6

-

-

... More
Supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 2.5 metre down rod with fan clamp, and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessary accessories and hardware's as required. (SD -563)

4

-

-

... More
Supply and fixing of 300mm(12")sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessary accessories and hardware's as required. (SD-115)

10

-

-

... More
Supply and fixing of louvers shutter arrangements for 300mm(12")sweep (Heavy duty) AC Exhaust fan complete (SD120)

3

-

-

... More
Supply and Fixing of Cove LED Light (10W) on floor or Ceiling with Mounting accessories ( IP20 & IP44 ) Complete etc,. (Make :Philips/ Klite /Crompton/Havelles )

12

-

-

... More
Supply and laying of following XLPE armoured LTUG cable in a trench/Tray with suitable cable tie tag etc as required.

-

-

-

... More
Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD748)

15

-

-

... More
Supply and Laying of 31/2 x 25sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD-746)

15

-

-

... More
Supply and Laying of 4C x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

264

-

-

... More
Supplying & Laying HDPE Pipe as per requirements including excavation & refilling.

255

-

-

... More
Supply and fixing of double compression brass cable gland for following Aluminium conductor XLPE insulated armoured cable of 1100 V grade with earth connection.

-

-

-

... More
Supply and fixing of brass cable gland for 3 1/2 C x 70 Sq.mm PVC LTUG armoured cable with earth connection (SD-189)

3

-

-

... More
Supply and fixing of brass cable gland for 3 1/2 C x 50 Sq.mm PVC LTUG armoured cable with earth connection (SD-188)

3

-

-

... More
Supply and fixing of brass cable gland for 3 1/2 C x 25 Sq.mm PVC LTUG armoured cable with earth connection (SD-186)

3

-

-

... More
Supply and fixing of brass cable gland suitable for 4C x 16 PVC armoured LTUG cable with earth connection.(SD- 183)

7

-

-

... More
Supply and providing cable end termination of the following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. Cable)

-

-

-

... More
Supply and providing cable end termination of 3 1/2 Core x 50Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

9

-

-

... More
Supply and providing cable end termination of 3 1/2 Core x 25Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

9

-

-

... More
Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

25

-

-

... More
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End (SD-375)

140

-

-

... More
Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil) Higher End (SD-385)

41

-

-

... More
Supply and Run of 4 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

11

-

-

... More
Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour. ( SD 430 )

11

-

-

... More
Supply and Run of 2 Run x 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe on concealed wall and ceiling with continuous earth wire connection with painting of suitable colour.

26

-

-

... More
Supply and fixing of thermoplastic loop - in and loop out boxes with lid of dimension min 104X104X70MM with 20A connector. shorting link 2 way necessary and along DIN rail terminal block. The Junction Box shall be insulated and made out of high grade thermoplastic. The JB shall be IP Rated for outdoor applications, environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid& anti corrosive. The JB shall be rated for Degree of Ingress Protection IP 65 in accordance with IEC 60529.

11

-

-

... More
Supply and fixing of 1no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Scope cover wall cutting , grouting , flushing and making good on the wall. Higher End. (SD 464 )

11

-

-

... More
Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Scope cover wall cutting , grouting , flushing and making good on the wall. Higher End.

11

-

-

... More
Supply and fixing of manufacturer's GI metal back box and 3 nos of 6A modular switch, 3nos of 6A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.

6

-

-

... More
Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Scope cover wall cutting , grouting , flushing and making good on the wall. Higher End.- (SD 488)

26

-

-

... More
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 50mm and 2 mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable clamp and with copper earth plate of size 125mm x 50mm x 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry SD-233

3

-

-

... More
Supply, Installation, Testing and Commissioning of earthing station consisting of 600 x 600 x 3 mm. thick, copper Plate earth electrode, back filling with alternate layer of charcoal, salt, brick masonry work for chamber 450 x 450 mm. heavy duty CI cover, watering pipe, funnel and earthing conductor as per IS:3043 specification. All civil works required such as excavation in all types of soils, rocks, PCC Earthing Chamber foundation, reinstatement and making good the surface to match original, removal of surplus earth etc. are included.(Rate as per Quotation)

3

-

-

... More
Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth. ( SD 78)

27

-

-

... More
Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with termination in the earth pits, Panels, Distribution boards and equipments with bitumen paint including accessories wooden plugs, screws, fastener etc., all inclusive

-

-

-

... More
Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection (SD-76)

11

-

-

... More
Supply and run of 25mm x 6mm GI flat with necessary clamps / supports on wall / floor / ground for earth connection (SD-77)

11

-

-

... More
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD -458)

11

-

-

... More
Supply and Run of 1 of No.8 SWG GI wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD -459)

11

-

-

... More
Supply and Clamping of CAT 6 armoured cable in suitable PVC Pipe 1" thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 501731; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

135

-

-

... More
Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

135

-

-

... More
Supply and fixing of POE 24 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP40 protection / EFT protection for power line.

1

-

-

... More
Supply and Fixing of Rack with Accessories -Higher end 36 U Rack with LNS unit and fan extra for the above rack.

1

-

-

... More
Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up

1

-

-

... More
Supply & Fixing 50W Led Light Model: Angle Dixon, Dimension : 865 x 785 x 3660mm, Wattage : 50W LED. NOTE: (i) LED: 2700K,3000K,4000K,5700K (ii) Product Finish: Jet Black

3

-

-

... More
Supply & Fixing 6W Led Light Wall-Recess, COD (mm) : 124 x 83 x 70, Wattage : 6W LED. NOTE: (i) LED: 2700K,3000K,4000K,5700K (ii) Product Finish: Jet Black

10

-

-

... More
supply & fixing Led Ground Burial 18w with Luminous Flux 90lm/w at 3000K,Color Temperature 2700K / 3000K / 4000K / RGB / RGBW, Beam Angle 8°/15°/30°/36°/45°/60°/90°,Input Voltage DC24V/100-277V,Control DMX/RDM/DALI/Remote/OnOff Power factor ≥0.95 Housing Aluminum body + Stainless steel trim Cover Tempered class Dimensions ø200xH90mm / ø200xH95mm / ø250xH95mm / ø300xH90mm IP Rating IP67 IK Rating IK09 Mounting Recessed inground Operating Temperature -25°C ~ +50°C Lifespan 50,000Hrs (Ta=35°C@L70) THD 10% Certificate BIS / CE / RoHS as per required.

140

-

-

... More
SECTION-1_SANITARY FIXTURES & CP FITTINGS

-

-

-

... More
Supplying and fxing in position White / Colour Special DeluxModel Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fxing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fttings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fttings, such as, 15mm bras connections, 5mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifcations. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fttings with normal seat cover Wall Fitting

8

-

-

... More
Providing and fixing C.P jet spray / health faucet with required length of flexible tube, clamp and bracket for fixing to wall as per required. Hand shower (Health Faucet),flexble tube&wall Bracket(Model No-ALD -565)

8

-

-

... More
Providing and fixing C.P Brass angle valve 15 mm complate as per required. (Make: CP Angle stop cock with wall flange (Model no-FUS-29053)

12

-

-

... More
Providing and fixing 450mm Long Braided Hose pipe with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Wash Basin, Kitchen Sink etc.) of approved make and conforming to Manufacturers Standards.

12

-

-

... More
Supplying and fixing white Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia ‘B’ Class GI Waste Pipe,15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc Colour with Pedastal

7

-

-

... More
Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. .

7

-

-

... More
Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin.

13

-

-

... More
Providing and fixing in position superior quality and approved make Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia ‘B’ Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc..

4

-

-

... More
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

7

-

-

... More
Supplying and fixing chromium plated brass towel rail 60cm long with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

10

-

-

... More
Supplying and fixing chromium Porcelain Soap Dish of size 150mm x 150mm x 50mm of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

10

-

-

... More
Providing and fixing in position 15mm dia CP brass Bib Cock with cover flange plate including CP brass extension nipple wherever required and all necessary fittings etc complete.

6

-

-

... More
Supply, storing, installation and testing liquid soap dispenser with CP / SS cap and bracket, fixed to wall with CP brass screw, etc. complete. (Make: Hind ware/cera/jaguar/Grohe

6

-

-

... More
SECTION-2 WATER SUPPLY PIPING

-

-

-

... More
Pipes and pipe accessories, traps, supply of supports and support fixing, chase cutting and making good the surfaces, coving, core cutting, etc. shall be in the Scope of the Contractor. All consumables other than materials supplied by manufacturer required for fixing the china ware, sanitary ware and CP fittings and fixtures shall be provided by the Contractor. All the shaft clamps (inclusive in unit rate) shall be with slotted FRP channel, 6mm MS L bend, U bolts with silicon rubber with required nuts and washer set. The clams shall be considered at min 1 distance in shaft. For suspended plumbing the clamps shall include 10mm anchor fastener with 10mm threaded rod of required length with 25 x 2mm oval clamps with silicon rubber @ min 1Mt distance. Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting, Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs, PVC Clamps and screws, making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. Contractor. All the shaft clamps (inclusive in unit rate) shall be with slotted FRP channel, 6mm MS L bend, U bolts with silicon rubber with required nuts and washer set. The clams shall be considered at min 1 distance in shaft. For suspended plumbing the clamps shall include 10mm anchor fastener with 10mm threaded rod of required length with 25 x 2mm oval clamps with silicon rubber @ min 1Mt distance.

-

-

-

... More
15mm dia

20

-

-

... More
20mm dia

32

-

-

... More
25mm dia

23

-

-

... More
32mm dia

6

-

-

... More
40mm dia

9

-

-

... More
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

-

-

-

... More
20mm dia Wheel Valve

1

-

-

... More
25mm dia Wheel Valve

1

-

-

... More
32mm dia Wheel Valve

1

-

-

... More
40mm dia Wheel Valve

2

-

-

... More
50mm dia Gate Valve

2

-

-

... More
External Water Supply ArrangementsProviding laying and jointing in true line UPVC Pipe (SCH- 80) for cold water including fittings make Ashirvad / Prince / Supreme / Astral / Finolex or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every 2meter C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

-

-

-

... More
20mm dia

5

-

-

... More
25mm dia

5

-

-

... More
32mm dia

5

-

-

... More
40mm dia

5

-

-

... More
50mm dia

100

-

-

... More
Providing and fixing in position of approved quality G.M. float valve with copper ball float and brass rods of required length suitable for test pressure of 5Kg/SqCm of the following sizes : [A] 50mm.

1

-

-

... More
Providing and fixing 20mm diameter Brass Air release valve, double acting, screw end of approved make complete as per engineer in charge.

2

-

-

... More
Making connection with the external water supply main, OHT connection including providing of required length of pipes (for connection), fittings & necessary fixtures.

1

-

-

... More
Providing, Fixing, testing and commissioning of C.I. Non Return dual plate Valve of specified diameter as per technical specifications and directions of the Project Manager. The rate shall include providing gaskets 6mm thick and reducers.

-

-

-

... More
40mm dia.

1

-

-

... More
50mm dia.

1

-

-

... More
Providing and fixing cast iron 'Y' strainer suitable to pipes of following dia. including flange. Min Pressure Rating should be PN16. Body should be ductile Iron With Epoxy Coating & Gasket of EPDM material. Filter Screen : Stainless Steel, Medium Temperature -10-120°C, End Connections : Flanged

-

-

-

... More
50mm dia.

1

-

-

... More
Supplying and erecting SINTEX or approved equivalent make HDPE plastic vertical cylindrical 2000 Litre Water Storage Tank. Strickly adhering ISI Standard as per ISI Mark 12701 (Latest revision) including all taxes and freight charges within Corpn.City limit.

1

-

-

... More
Constructing brick masonry chamber for underground Valve chamber and bends with bricks having crushing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii) Inside dimensions 600mm x 600 mm and 600mm deep for pipe line with one or two inlets. (more than 10 ton)

5

-

-

... More
SECTION-3_DRAINAGE SYSTEM ( SOIL, WASTE and RAIN WATER PIPING) Pipes and pipe accessories, traps, supply of supports and support fixing, chase cutting and making good the surfaces, coving, core cutting, etc. shall be in the Scope of the Contractor. All consumables other than materials supplied by manufacturer required for fixing the china ware, sanitary ware and CP fittings and fixtures shall be provided by the Contractor. All the shaft clamps (inclusive in unit rate) shall be with slotted FRP channel, 6mm MS L bend, U bolts with silicon rubber with required nuts and washer set. The clams shall be considered at min 1 distance in shaft. For suspended plumbing the clamps shall include 10mm anchor fastener with 10mm threaded rod of required length with 25 x 2mm oval clamps with silicon rubber @ min 1Mt distance. Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 6 kg/SqCm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. 110mm dia PVC Pipe Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6kg/SqCm pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level.

40

-

-

... More
110mm dia.

75

-

-

... More
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

-

-

-

... More
110mm dia PVC Plain Elbow

11

-

-

... More
110mm dia PVC Door Elbow

8

-

-

... More
110mm dia PVC Plain Tee

8

-

-

... More
110mm dia PVC Door Tee

8

-

-

... More
PVC Y with door 110mm dia

10

-

-

... More
Providing and Fixing RIGID PVC Pipe for Kitchen Sink, basin wash out & urinal wash out pipe ISI marked brand as per IS:4985 (6KG) complete with PVC Fittings & claps & hinges including cutting and making good the walls & ceiling for waste pipes, connections & as directed by the engineer-incharge. (Astral / Ashirvad / Supreme)

-

-

-

... More
40mm dia INCLUDING ALL BENDS

33

-

-

... More
Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works).

-

-

-

... More
110mm dia.

10

-

-

... More
CI Nahani Trap / Floor TrapSupply and fixing of PVC Nahani / Floor Trap with stainless Steel Gratings 100 x 75mm including all charges etc, complete as per standard specification.

15

-

-

... More
SECTION-4_External DRAINAGE SYSTEM (SOIL, WASTE and RAIN WATER PIPING) Providing, Fixing, testing and commissioning of under ground UPVC foam core multi layer pipes SN-8 having outer and inner layers of conventional PVC and middle layer of foamed PVC with fittings of specified diameter with all necessary excavation, providing and laying PCC (1:4:8), laying, refilling, compaction, dewatering, curing, retesting and disposal of any excess earth / soil from the site as per & complete to specifications, drawings, details as directed by Project Manager. (The pipe should be laid with sand layer 150mm above and below the pipe with encasing as per directed by the Project Manager).

-

-

-

... More
160mm dia

35

-

-

... More
200mm dia

4

-

-

... More
Construction of Inspection chamber of size 60x60x60cm with necessary earth work excavation, 40mm size brick jelly concretein C.M.1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10 broken brick jelly)stock brick work in c.M.1:y (1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) for 23cmthick wall, benching, channelling and plastering,interior,exterior and top with c.M.1:3 (1 cement and 3 Crushed Stone Sand (Commercially called MSand) Sandsand) 12mm thick and providing 7.5cm thick RCC loose slabcovering in CC 1:2:4 ( 1 Cement,2 Crushed Stone Sand (Commercially called M-Sand) and 4 blue granitebroken stone jelly of 12mm to 20mm size) with necessary reinforcement and arrangements to lift for cleaning purpose,etc.,complete.

3

-

-

... More
Construction of inspection chamber of size 60x60x90cm with necessary earth work excavation, 40mm size brick jelly concretein C.M. 1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10 broken brick jelly) stock brick work in C.M. 1:6 (1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) for 23cm thick wall, benching, channelling and plastering,interior, exterior, and plastering, interior, extrior and top with C.M. 1:3 ( 1 cement and 3 Crushed Stone Sand (Commercially called M-Sand)), 12mm thick and providing 7.5cm thick R.C.C loose slab covering in C.C. 1:1.5:3 (1 cement, 1.5 Crushed Stone Sand (Commercially called MSand) and 3 blue granite broken stone jelly of12mm to 20mm size) with necessary reinforecement and arrangementsto lift for cleaning purpose, etc., complete.

3

-

-

... More
Supplying and fixing 15x10cm stoneware gully with 'P'or 'S' trapwith 15x15cm C.I.grating and 10cm dia S.W.bend including 40mm size brick jelly concrete in C.M.1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10 broken brick jelly 40mm gauge),10cm thick alround the gully, 11cm thick wall with stock brick work in C.M.1:4 ( 1cement and 4 Crushed Stone Sand (Commercially called M-Sand)) upto ground level and plastering with C.M.1:3 (1 cement and 3 Crushed Stone Sand (Commercially called M-Sand)),12mm thick for gully silt pit of size 15x15cm etc.,complete.

9

-

-

... More
Making connection from central existing sewer pipe line, STP and Septic tank and soak well by breaking, excavation dewatering, purchasing / fabricating suitable size fittings for connection, refilling etc. comp. work to be done as per the local authority requirement including all liasoning cost.

1

-

-

... More
Supplying and fixing FRC cover and frame 60x60cm size including necessary masonry work with cement mortar, fixing inposition,etc.,complete.

6

-

-

... More
Supply and fixing, water level controller for the Under ground tanks of approved make complete, as directed.

1

-

-

... More
SECTION-5_Plant and Machineries

-

-

-

... More
SECTION-5_Plant and Machineries Supply, installation, testing and commissioning of Hydro pneumatic Horizontal Multistage Pump's system, PRESSURISED WATER FROM UGWT TO OHT - Each Pump Flow : 10m3/hr, Each Pump Head : 50Mt, Pump MOC : Pump Head & Base - CED Coated CI, Assembly - SS304, SUC & DEL - 40 x 40mm Each Pump Motor : 1.1KW (1.5HP), 2Pole, 3Phase, 50Hz, IE3. Control Panel (1W+1S) : Control Panel IP54 Equivalent, Multi VFD based inbuilt PLC & Cascade operation. Pressure Tank - 100Litre pressure tank (Global make, 10 Bar). Scope of Supply : Pump set (2 Nos.) Skid Mounted, Control Panel (Wall Mounted 1 No), Suction & Discharge Header with Isolation & NRV, Pressure Gauge & Pressure transmitter, Pressure tank, Air Vent Valve.

1

-

-

... More
Supply,installation, testing and commissioning 10 KLD FRP septic tank and soak well as per enginner requirement to complete job work.

1

-

-

... More
Supply,installation, testing and commissioning 50 KLD FRP Under Ground Water tan k as per enginner requirement to complete job work.

1

-

-

... More
Panels for Interpretation center

-

-

-

... More
[3] s Supply of Immersive Animation Experiences in Augmented Reality which can be consumed via installed QR codes from the user's mobile device, centered on Biodiversity Conservation Center - the habitat, the composition the evolution of species, Deep content on the significance of mangrove for the overall ecology. Educational yet entertaining content that will be viewed from the terrace of the Biodiversity Conservation Center

1

-

-

... More
Supply of Holograms along with content to be housed in Room of Biodiversity Conservation Center

2

-

-

... More
Digital Panels in Room. 55200.00 Nos 55" 4K UHD(3840 X 4,41,600.00 2160) resolution 500 Cd/m2, 28% Haze 2-10 Level, Android 9 OS based LED display wth built in 5 Ghz/ 2.4 Ghz Wifi Built in Quad core processor, 2 GB RAM, 8 GB Memory Built in Wifi and mirroring with support for Windows/Android/los/Mac OS, Landscape/Portrait installation, File manager built in, Auto wakeup on HDMI Auto switching and Auto standby. Bootlogo setting Boot video setting PIN based authentication. Built-in Bluetooth 5.0 20W District orost Offlicer built in speakers, HDMI 2.0 X3, RS232X 1.USB202, RJ45 X 1 Line Audio Out x 1, Support BLE and Beacon, HDMI Input Lock Menu lock, App lock remote lock, Wireless lock

8

-

-

... More
Interactive Touch Digital Panel in Room 65" Multi touch Interactive display with built in SOC with 1.9 Ghz Quad core processor, Android 13.0, 4 GB RAM,32 GB Memory 450 Cd/m2,4 mm 7 MOHS tempered glass, 5 GHz Wif built in, 3 X HDMI Input, 1 X HDMI Out, 4 X USB A 3.0 2 X USB 2.0, 1 X USB Type C 3.0, RJ45 X 1, RS232 X 1, Audio Out x 1, RJ12 X 1, 2 x 20W front facing speakers, 40 point ouch for Windows,10 point touch for Android, OPS Slot, Built- in white board, Writing, Pen, Palm Eraser, Save, Screen Capture, Storage and Tool Bar. Supports 3rd party applications, recording feature, USB WEB Cam Compatible, Support PPT, Word, PDF, Image, Video Play 2 x touch pen, Compatible with Device Management Software

5

-

-

... More
On-premise software solution for Digital Panel Content Management

1

-

-

... More
License for Digital Panels

8

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.