Directorate Of Town Panchayats Tender

Technical Specification for Light Commercial Vehicle with following Specifications (1)Displacement (CC) / Engine Capacity - 700 CC -1250 CC (2)Max Power-20- 30BHP @ 2500 rpm and above (3)Max Torque-500Nm @ 2000 rpm and above (4)Type of fuel-Diesel (5)Load Capacity-2 cu.rn (6)Vehicle emission- Norms-BS -VI (7)No of cylinder in engine-2 — 4 cylinder (8)Length of chassis-3800 mm - 3950 mm (9)Width of chassis-1500 mm — 1550 mm.Ground clearance. 150 mm -165mm (10)Fuel tank capacity-Diesel-30 Ltrs to 40 ltrs CNG- 12-25kg (11)Size of Tyre’s & No‘s-145 R 1 2 — 5 N os. (12)Wheel base-1900 mm — 2250 mm (13)Gross vehicle weight-1550 kg 1900 kg (14)Clutch-Single plate dry friction diaphragm (15)Transmission System-Manual (16)No of speed/ forward gears-4 Nos Speeds(4F+ 1R) (17)Type of Steering-Manual / Power (18)Speed Governors-Shall be Fitted (19)Pay Load-800 Kg to 1000Kg (20)Tipper body length-2100 mm-2200mm, Mlild steel (21)Tipper body Width-1400 mm - l500mm, Mild steel (22)Tipper body Height-750mm- 950 mm, Mild steel (23)Side portion (LH & RH)& rear doors Sheet thickness-2 mm, Mild steel (24)Tipper body top sheet including frame sheet thickness-1.6mm, Mild steel (25)Tipper Body Top Lid Sheet thickness-1.2mm, Mild steel (26)Tipper Container-Tipper Container should be Fabricated with two doors on the rear side and four doors on four top corners of the containers with hinges and locking system. A partition shouId be provided on the middIe of container along the vertical length of the body (27)Tipper Body Top Lid main Sheet thickness-75 x 40 x 6 mm (28)Hydraulic cylinder make-Reputed Make (29)Hydraulic system driven-Main Engine (30)Pump Make-As per IS standard (31)Painting-Should be painted with one coat of Anti-corrosive epoxy primer and two coats of enamel paint for approved quality to ensure long lasting resistance for weatherizing and breakage. The color shade should be as per norms. (32)Lettering-To be carried out as directed by Dept ofñcers (33)Tipper body rear door-Shall be with necessary locking facility (34)Side safety guard-Shall be provided as per RTO requirement (35)Additional conditions-Vehicle with fuel sensor and GPS tracking. (36)Warranty Distance/Year-25000KM//12 months whichever is earlier - One Number of Light Commercial Vehicle

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part m.sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

All figures quoted should be inclusive of GST Charge