Directorate Of Town Panchayats Tender

Providing and laying Priming coat over the WMM surface using 7.00kgs of Emulsion Bitumen [SS-1 (IS 8887:2004)] for 10 sqm area including cost of Emulsion Bitumen, labour charges for preparing the surface for laying the Tack coat and applying the required quantity of Emulsion Bitumen as Tack coat including hire charges and fuel charges for Mechanical Sprayer and all other tools & plants employed for the work etc., complete as per Clause 111, 112, 501, 502 of MORTH Specifications.

Providing and laying tack coat over the prime surface using 2.50kgs of Emulsion Bitumen [RS-1 (IS 8887:2004)] for 10 sqm area including cost of Emulsion Bitumen, labour charges for preparing the surface for laying the Tack coat and applying the required quantity of Emulsion Bitumen as Tack coat including hire charges and fuel charges for Mechanical Sprayer and all other tools & plants employed for the work etc., complete as per Clause 111, 112, 501, 503 of MORTH Specifications.

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 111, 112, 501, 505, 900 of MORTH Specification Rev-5.

Providing and laying Bituminous Concrete to 30mm thick using 0.13 cum of 19.00 - 9.50mm, 0.17cum of 9.50 -2.36mm and 0.26cum of 2.36 and below with 50.30 kgs of VG30 / VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 111, 112, 501, 507, 900 of MORTH Specification Rev-5.

Supply,delivery and filling of U.S Gravel in layers of not more than 15cm thick including watering with with all layers and consolidation by power Roller complying with standard specification including Cost and conveyance of Gravel at site and all labour charges and all other incidental charges etc., complete as per standard specification.

Road Marking with Hot applied Thermoplastic compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.

Road Markers/Road Stud with Lense Reflector Providing and fixing reflective road studs of category B' Raised pavement markers made out of poly carbonate/ABS moulded body and reflective panels(bi-convex reflectors) with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro-reflectance and chromaticity values consforming to ASTM D4280 . The reflective circular No.RW/NH.33023/10/97-DO.III dt:11.06.97 and the length, height and width of the body shall not be less then 100mm , 15mm and 90mm and base of marjer shall be flat within 1.3mm. The marker shall support a load of 13635 Kg. tested in accordance with ASTM D280. Lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The area of earch retro-reflectory surface shall not less than values specified in table 2 of said MORTH circular and two cylindrical Polymer Shanks of not less than 20mm diameter and not less than 30mm length shall be provided for better anchorage.