Corporation Of Chennai Tender

Supplying and erecting in position LIGHT DUTY STEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm to the relevant Indian Standard specification. The trusses shall be procured only from reputed manufactures of trusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design. The rate quoted shall include the cost of trusses. Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of redoxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc., The roof sheeting shall project 0.762m from the eves purlins. For structures like CYCLE STAND, PARKING GARAGE, TEMPORARY ENCLOSERS

Roofing with galvanised corrugated iron sheets (thickness of sheet 0.8mm) including J bolts and nuts with bitumen washers etc. complete (ISI STD).

Painting new iron work two coats with ready mixed paint with relevent ISI STD of superior quality and approved colour..

Supplying and fixing ply wood partition with teak wood frames of 75x50mm size and with 3mm thick commercial plywood fixed with screws and nails including fixing in position with 4Nos.of iron hold fast 50x6x230mm size etc. complete..

Plastering with cement mortar 1:3 (1 cement and 3 river sand)20mm thick including curing etc. complete.

Painting the OLD plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per (ISI STD) (It must provide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years..

Supplying and paving with Bangalore stone for elevation work setin C.M.1:2 ( 1 cement and 2 river sand) 20mm thick and neatlypointed with the same mortar including cutting dressing to sizeand fixing in position with necessary scoffolding curing etc. complete as directed during execution.(ISI STD).

For making and fixing M.S.Sheet Door of required size with two shutter using necessary M.S.Angles 50x50x6mm/40x40x6mm "L" Angles as diagonal Bracings 4Nos. for each shutter and centre Bracings for 1No.for each shutter. M.S.Flats 25x6mm/40x6mm and M.S.Sheet 1.25mm thick (18 gauge) and providing hinges welded with M.S.Angles 50x50x6mm bits at three places at equal intervals on both sides Latches 25cm size length for locking arrangements providing 12mm dia. M.S.Rod running through the hinges on both vertical side for easy swining purpose of doors including one coat of pFor making and fixing M.S.Sheet Door of required size with two shutter using necessary M.S.Angles 50x50x6mm/40x40x6mm "L" Angles as diagonal Bracings 4Nos. for each shutter and centre Bracings for 1No.for each shutter. M.S.Flats 25x6mm/40x6mm and M.S.Sheet 1.25mm thick (18 gauge) and providing hinges welded with M.S.Angles 50x50x6mm bits at three places at equal intervals on both sides Latches 25cm size length for locking arrangements providing 12mm dia. M.S.Rod running through the hinges on both vertical side for easy swining purpose of doors including one coat of primer cutting iron members welding fixing door in position etc. complete as directed during execution (as per design drawing enclosed).(Materials to be used with relevent ISI STD)..

FALSE CEILING WITH MINERAL FIBER TILES Providing and fixing true horizontal level false ceiling using SAINT - GOBAIN GYPROC CELOTEX PIN or Equivalent make with 24 mm Grid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C. Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at 1200mm c/c max by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm (Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying with saint gobain make mineral fiber pinholes Tiles (600mm x 600mm x15mm)

Door Stopper

Providing New Long Body Tap fixed in Shower Room

Providing New Swan Neck Tap fixed for Wash Basin

Providing New Gun set fixed in Toilet - Faucet

Providing New CP Angle Cock Tap Fixed with Connecting Pipe

Supplying and fixing 1 HP Jet Motor

Labour Charges