Military Engineer Services Tender
View complete overview of Sikkim MES Tender
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Electrical and Electronics
Electrical Works
Eprocure
Opening Date31 Aug 2024
Closing Date21 Sep 2024
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_668380_1Tender No
8259/A/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed.
5
-
-
Taking down shutters and refixing in same opening of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed.
10
-
-
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
268
-
-
Taking down cement plaster/terrezzo cast in situ of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.
160
-
-
Demolition of concrete in ground floor and pavings n.exc 15cm thick (un reinforced) complete all as specified and as directed.
8
-
-
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
0.5
-
-
Demolition of precast concrete block/brick walling built in cement mortar etc complete all as specified and as directed.
2
-
-
Dismantling old PGI/CGI/AC sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and as directed.
199
-
-
Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins complete all as specified and as directed.
22
-
-
M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified and as directed.
0.25
-
-
M&L for plain, framed, panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed.
7.2
-
-
S&F second class hardwood, glazed and skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats complete all as specified and as directed.
5.4
-
-
S&F Factory made flush shutters 30 mm thick, solid core construction, with particle board core commercial type on one side and one face covered with decorative face veneer wtih lipping/frame to match complete all as specified and as directed.
9
-
-
S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification and drawing complete all as specified and as directed.
35
-
-
S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail on either side & as gap insert for toprail and bottom rail, panelling of both side prelam PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with uitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES Schedule Part-II (2020) complete all as pecified and as directed.
10
-
-
S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete all as specified and as directed.
50
-
-
M&L for 150 mm size aluminium anodised cast type handles complete all as specified and as directed.
50
-
-
M&L for 100 mm size mild steel pressed handles, oval types, stove enameled black complete all as specified and as directed.
50
-
-
S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and as directed.
50
-
-
S&F of 100mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and as directed.
20
-
-
S&F of 100mm size mild steel butt hinges medium weight complete all as specified and as directed.
50
-
-
S&F 100mm size brass handles (decorative type) cast type polished bright complete all as specified and as directed.
10
-
-
S&F of 75mm size mild steel butt hinges medium weight complete all as specified and as directed.
50
-
-
S&F continuous (piano) hinges with 30 mm width of flaps ( when open), mild steel bright finish or electrogalvanised fixed with stainless steel screws complete all as specified and as directed.
10
-
-
S&F in repairs of 18 / 19mm thick particle board medium density flat pressed,single layer type with BWR type adhesive fixed with screws to timber frame work as in repair including teak wood lipping 6mm thick all round fixed with nails complete all as specified and as directed.
20
-
-
S&F of factory made steel windows with side hung shutters openable type including projective type hinges steel handle and peg stay complete with glazing bars fixed to existing opening and making to match as per existing surfaces including taking out old/unserviceable steel windows complete all as specified and as directed.
5
-
-
S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay complete including taking out old/unserviceable steel ventilator complete all as specified and as directed.
2
-
-
M&L for PCC (1:3:6), type C-1 (using 20mm graded crushed stone aggregate) as in coping complete all as specified & as directed.
1
-
-
Supply & fix in repair Bib tap , long body cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one
10
-
-
Supply & fix chromium plated health faucet 8 mm dia alongwith 1m flexible tube and wall hook fixed in position complete all as directed.
2
-
-
Supply and fixed in repairs 15mm bore pillar taps, fancy type with long neck with aerator cast copper alloy with capstan head, chromium plated, screwed down, high pressure with long screwed shanks, fly-nuts, with screwed for GI pipe complete all as specified and as directed.
5
-
-
Supply & fix in repair 15 mm bore angular Stop cocks,chromium plated, with wall flange screwed down, screwed for iron pipe or union and complete all as directed.
6
-
-
S&F in repair 15mm bore chromium plated single lever basin mixer with 305mm (12") extended body and 600mm braided connection pipe (without pop-up) complete all as specified and as directed.
2
-
-
S&F in repair for 15mm bore concealed stop cock fancy type choromium plated with long shank and cup complete all as specified and as directed.
2
-
-
Taking up or down 15mm bore steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings or floor etc complete all as specified and as directed.
90
-
-
Taking up or down 20mm bore steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings or floor etc complete all as specified and as directed.
90
-
-
M&L for 15mm steel tubing medium grade, (ISI Marked), including all fitting fixed complete to walls and ceiling or floor complete all as specified and as directed.
90
-
-
M&L for 20mm steel tubing medium grade, (ISI Marked), including all fitting fixed complete to walls and ceiling or floor complete all as specified and as directed.
90
-
-
M&L for Cutting chases, pinning in, making good to facing where required and pointing in CM (1:3) for concealed water tubing conduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls complete all as specified and as directed.
50
-
-
S&F rotational moulded polythylene water storage tank, 500 litres capacity, anti bacterial, UV and heat resistant 3 layer (ISI marked) multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including supply and fixing of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 210 gms, with threaded cap/Lid including connection including dismantling of old unserviceable water tank complete all as specified and as directed.
2
-
-
S&F rotational moulded polythylene water storage tank, 1000 litres capacity, anti bacterial, UV and heat resistant 3 layer (ISI marked) multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including supply and fixing of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 455 gms, with threaded cap/Lid including connection including dismantling of old unserviceable water tank complete all as specified and as directed.
2
-
-
S&F rotational moulded polythylene water storage tank, 2000 litres capacity, anti bacterial, UV and heat resistant 3 layer (ISI marked) multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including supply and fixing of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 210 gms, with threaded cap/Lid including connection including dismantling of old unserviceable water tank complete all as specified and as directed.
2
-
-
M&L for glazed coloured ceramic tiles (350x250x7mm thick/450x300x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match the colour incl 10 mm thick screed bed/rendering of CM (1:4) as in wall complete all as specified and as directed.
25
-
-
M&L for Non - skid colured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
210
-
-
M&L for Light shade virtified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour incl 20mm thick screed bed in cement mortar (1:6) for laying floor/roof finishes complete all as specified and as directed.
25
-
-
All as per item No 48.00 here-in-above but in skirting with 10 mm thick backing coat in CM ( 1:4) complete all as specified and as directed.
8
-
-
M&L for machine cut prepolished kota stone flooring slab flooring 20-25mm thick over cement screed 20mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed.
4
-
-
M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded crushed stone aggregate), finished concrete surfaces even and rough to receive floor finishes complete all as specified and as directed.
40
-
-
Material and labour for Lacquer coated Chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement & pigment, set, jointed and pointed in neat cement slurry in floors cement laid over and including screed bed/ bedding layer of 15mm thick in cement mortar (1:6) complete all as directed.
40
-
-
M & L for hardcore of gauge of n.exc 63mm (using broken stone or boulders) deposited spread and levelled in layers not exc 15cm thick, watered and rolled/rammed to a true surfae complete all as specified and as directed.
2
-
-
M&L for 100mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in path/steps with and incl use and waste of form work and finishing surfaces even and fair without using extra cement complete all as specified & as directed.
25
-
-
M&L for PCC 100mm thick (1:2:4) type B-2, (using 20mm graded crushed stone aggregate) as in hard stand/path etc including finish the surface even and fair without using extra cement complete all as specified and as directed.
20
-
-
M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) in plinth protection path/hardstanding finishing surfaces even and fair without using extra cement complete all as specified & as directed.
25
-
-
M&L for PCC (1:3:6), type C-2 (using 40mm graded stone aggregate) as in surface channels/drain including forming fair finished to drain channel complete all as specified and as directed.
1
-
-
M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including form, moulds, mitrred/stopped ends complete all as specified and as directed.
50
-
-
Materials & labour for rendering 15 mm thick in cement mortar (1:6) on fair face of brick or stone masonary of wall surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.
80
-
-
M&L for rendering 15mm thick in cement mortar (1:4 ) with using WPC @ of 3% by weight of cement in finishing layer on brick or concrete surfaces finished even & smooth (WPC for finishing layer will be paid seperately as supply only) complete all as specified and as directed.
50
-
-
M&L for 5mm thick in CM (1:3) in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
30
-
-
Supply only liquid water proofing compound complete all as specified and as directed.
5
-
-
M&L PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregates) on in foundation, filling and mass concrete complete all as specified and as directed.
1
-
-
Taking down eaves gutter and rain water pipes (any size and pattern), including all fittings, heads, shoes, bends, swan necks etc including removal to stores complete all as specified and as directed.
30
-
-
S&F PVC (SWR) pipes, half round 150mm bore with rounded edges including all accessories like bend `T' etc for eaves gutter complete complete all as specified and as directed.
20
-
-
S&F in repair 110mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or under floors , fixed on walls with necessary clips complete all as specified and as directed.
20
-
-
Supply and fix in repair 110 mm bore PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls or fixed to steel gutter complete all as specified and as directed.
10
-
-
Supply and fix 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and as directed.
5
-
-
S & F for 75 mm bore PVC (SWR) pipe of pressure rating 4kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and as directed.
15
-
-
Supply and fix in repairs 75 mm bore PVC (SWR) bend of any radius for PVC (SWR) pipes/ Steel Gutters etc , fixed to walls complete all as specified and as directed.
5
-
-
Supply and fix 75 mm bore PVC (SWR) junction Double, (Double T) equal or unequal with acess door complete all as specified and as directed.
5
-
-
S&F in repair 50mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or under floors , fixed on walls with necessary clips complete all as specified and as directed.
12
-
-
M&L in repairs for PVC floor/Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 100mm) as in repair complete all as specified and as directed.
5
-
-
M&L for pre-painted galvalume aluminium zinc coating GI based corrugated/Zigzag/Trapezoidal pattern corrugation steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering fixed with self tapping screws/L type or J hooks complete all as specified and as directed.
190
-
-
M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws /L type or J hooks complete all as specified and as directed.
9
-
-
S & F in repairs 5.5mm thick tinted Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed.
8
-
-
S & F in repairs 4mm thick tinted Sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane complete all as specified and as directed.
4
-
-
S&F 3mm thick sheet glass panes, ordinary quality and glazing with oil putty including steel pin in square n.exc 0.5sq. m in each pane fixed to steel frame complete all as specified & as directed.
10
-
-
M&L for applying one coat of white wash including preparation of old decorated surfaces of ceiling complete all as specified and as directed.
100
-
-
M&L for applying two coats of white washing including preparation of new or previously untreated surface of ceiling complete all as specified and as directed.
50
-
-
M&L for applying two coats of white washing including preparation of new or previously untreated surface of walls complete all as specified and as directed.
60
-
-
M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mass and efflorescent salts and trading oil and greasy spots and apply one coat of white wash complete all as specified and as directed.
110
-
-
M&L for preparation of old plastered surfaces and applying two coats of acrylic emulsion distemper over a coat of wall primer applied over 1mm thick finish including preparing the surface even and smooth complete all as specified and as directed.
80
-
-
M&L for preparation of old plastered surfaces of walls and applying one coat of acrylic emulsion distemper complete all as specified and as directed.
100
-
-
M&L for applying two coats of exterior acrylic emulsion painting (weather coat) over a coat of alkali resistant primer including complete removal of existing treatment and preparation of old/New surfaces complete all as specified and as directed.
120
-
-
M&L for applying one coat of weather shield exterior emulsion paints including preparation of old wall surfaces complete all as specified and as directed.
50
-
-
M&L preparation of new wooden surfaces of any description n exc 10 cm in width and grith and applying two coats of synthetic enamel paint (1st grade quality) over one coat of pink primer complete all as specified & as directed.
3
-
-
M&L for two coats of synthetic enamel painting (1st grade in quality) to new steel surface over a coat of red oxide primer including preparation of surfaces area exc 10cm width & girth complete all as specified and as directed.
20
-
-
M&L for prepartation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and apply one coat of synthetic enamel paint (1st grade in quality) complete all as specified and as directed.
40
-
-
M&L for two coats of synthetic enamel painting (1st grade in quality) to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified and as directed.
50
-
-
M& L for prepartation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described and apply one coat of synthetic enamel paint (1st grade in quality) complete all as specified and as directed.
100
-
-
Supply & fix bevelled edge looking mirror of size 600mm x 450mm x 5mm thick with selected quality glass, decorative type with aluminium channel frame, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including glass self assembly complete all as specified and as directed.
2
-
-
S&F in repairs of vitreous china wash down water closet pedestal pattern white with all fittings fixed as in repairs (excluding flushing cistern and flush pipe) including plastic water closet seat,white closed pattern with flat bottom and cover and MS CP aluminium/ PVC hinging device complete all as specified and as directed.
2
-
-
S&F in repairs stainless steel sink with drainage board made of stainless steel 1.00mm thick for kitchen with plug, washers, waste pipe including cantilever cast iron brackets connecting union of 40 mm CP waste fitting and PVC waste pipe of required length with CP/PTMT fly nuts etc complete overall size 915mm x 460mm with bowl size 410mm x 330mm x 160 mm complete all as specified and as directed.
2
-
-
Supply and fix in repair Vitreous China squatting pan of ‘Orissa pattern’, of size 580 mm x 440mm (white) with integral foot rest‘P’ or ‘S’ trap, front or back inlet, any pattern (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and as directed by the Engr-in-Charge
2
-
-
Supply and fix in repair vitreous china, white colour, wash hand basin of size 55 x 40 x 79cm fixed with brackets , including providing 32 mm dia PVC waste pipe , 32 mm bore CP waste coupling and making all necessary connections complete as directed.
2
-
-
Supply and fix PVC connections 15 mm size with PTMT nuts of length 450mm complete all as directed by the Engr-in-Charge.
12
-
-
S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, flush pipe etc complete & connecting to WC complete all as specified and as directed.
4
-
-
S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed.
10
-
-
S&F for Rolled sections Fe 410-w (grade E-250) quality-A as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates complete all as specified and as directed.
240
-
-
S&F framed work such as grills, gratings etc, with ends of bars, shoulded and/or riveted or forged in spikes, framed guard bars, walk ways, railings, frame work of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and as directed.
30
-
-
Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and as directed.
56
-
-
Dismantling timber as in fillets, rails etc under 40sqcm in section complete all as specified and as directed.
8
-
-
Dismantling timber scantlings 40 Sqcm and over in section, in unframed work in any position complete all as specified and as directed
0.01
-
-
Materials & labour for 6 mm thick plywood, 5 ply, grade BWR, type BB, fixed with screws to timber frame work in wall / ceiling complete all as specified and as directed.
31
-
-
S&F for 6mm thick veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work complete all as specified and as directed.
11
-
-
M&L for 2nd class hard wood timber scantling fixed clean swan complete all as specified & as directed.
0.3
-
-
M&L for use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railing, openings in concrete walls, floor and roofs exc 10cm but n exc 20cm wide complete all as specified and as directed.
8
-
-
S&F powder coated GI grid frame work for false ceiling comprising of the following sections for making partitions of 600mm x 600mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 23mm x 28mm x 0.30mm thick, cross tee shall be 23mm x 28mm x 0.30mm thick and wall angle shall be 20mm x 20mm x 0.30mm thick complete all as specified and as directed.
25
-
-
Supply and fix 4mm thick Non asbestos fibre cement building boards (E-board) of approved texture, for insulation and acoustic purpose of size 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulsion diatemper over a coat of primer including preparation of surfaces complete all as specified and directed by the Engr-in Charge.
25
-
-
S&F in repairs Harrison rail,mild steel,chromium plated , 25 mm dia with fixing brackets, stops, rollers, nob, holder etc in curtain rails complete all specified and as directed.
20
-
-
M&L for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite granite stone including cutting and polishing etc including 20mm thick screed bed in CM (1:6) complete all as specified and as directed
2
-
-
M&L for rounding to edges of granite slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and as directed.
5
-
-
M&L for TMT bars , 10 mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
40
-
-
All as per item No 114.00 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
20
-
-
M &L for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls including necessary form work complete all as specified & as directed.
NOTE : Re-inforcement shall be measured and paid separately.
0.5
-
-
S&F in repairs door closer of aluminium (extruded section) body hydraulically regulated universal type ,suitable for door shutters of 701 to 850 mm in width and of weight between 36kg to 60 kg and fixed complete all as specified and as directed.
4
-
-
S&Fin repairs floor door stopper of aluminium alloy body and tongue ,anodised,with hard drawn steel spring fixed in floor having overall length 150 mm complete all as specified and as directed.
4
-
-
M&L for precast PCC (1:3:6) type C1 (by using 20mm graded crushed stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in CM (1:6) complete all as specified and as directed.
2
-
-
Demolition of brick work or stone / boulder masonary or precast concrete block walling , built in cement mortar including all quoins, arches, pillars, etc but exclusing ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and as directed.
6
-
-
M&L for walling of RR stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM (1:6) including brought upto course complete all as specified and as directed.
5
-
-
All as per item No 121.00 here-in -before but except stone complete all as specified & as directed.
1
-
-
M&L for hand packing using Broken stone or boulders (any thickness) at back of wall over and raising (or lowering) to the required level complete all as specified.
Note:- Stone boulders obtained from item No 120.00 here-in-before shall be used.
1
-
-
S&F in repairs for aluminium anodised, aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
10
-
-
S&F aluminium powder coated(minimum thickness of power coating 50 micron) door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading, screws etc complete all as specified and as directed.
4
-
-
S&F in aluminium powder coated (minimum thickness of powr coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighting not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.
3
-
-
S & F aluminium Powder coated of any colour (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections not less than weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and as directed.
3.5
-
-
Taking down carefully old aluminium anodised door frame/door shutter fixed type window complete and refixing it after repairing of door frame/door shutter, pintal hinges including removing and refixing of door closer incl all hinges and all fittings, glass, ACP sheet, pre laminated particle board complete all as specified and as directed.
10
-
-
Supply and fix in repairs CP tubular towel rail 600 mm long with and including chromium plated brass screws complete all as specified& as directed.
4
-
-
E/M Portion:
Taking down carefully copper/ aluminium point wiring for light, fan, socket or power point complete with fittings such as switches, fan regulators, light fittings, tube light fittings, bracket light fittings and ceilling rose, holders and including making good the disturbed surface on walls, complete all as specified and as directed.
257
-
-
M & L for point wiring with PVC insulated unsheathed multi stranded copper conductor cable, 1100 volt, FRLSH grade of size 1.5Sqmm drawn through and including surface PVC casing & caping (ISI Marked) with accessories including PVC Box or existing sunken box and hylem sheet/PVC Box including 1.5 sqmm copper conductor cable FRLSH grade for earth continuty green in colour for one light point/fan point/Bell point controlled by one 5/6 Amps one way switch, complete all as specified and as directed by Engr-in-charge. Note:-(i) All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes and as directed by the Engineer-in-Charge.
210
-
-
All as per item No 131.00 here-in-above but, one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.
15
-
-
All as per item No 131.00 here-in-above but for one light point controlled by two 5/6 Amps two way switch complete all as specified and as directed.
2
-
-
All as per item No. 131.00 here-in-above but for 15/16Amp switch socket out let, independent with 2.5 sqmm copper cable FRLSH grade of PVC insulated, unsheathed, multi stranded and 2.5 Sqmm for earth continuity conductor FRLSH grade , complete all as specified and as directed.
30
-
-
Supply and fixing of switch paino, flush type, single pole, one way, 5/6 Amp, complete all as specified & as directed.
120
-
-
Supply and fixing of bell push, 5 Amp, 230Volt, complete all as specified & as directed.
5
-
-
Supply and fixing of bell electric Ding Dong type, Ac 230 volts fixed complete all as specified & as directed.
5
-
-
Supply and fixing of ceiling rose, surface Bakelite 65 x 30mm, three terminals, complete all as specified & as directed.
105
-
-
Supply and fix switch socket combination 2 pin & 3 pin 5 Amp, 230 volt, multipurpose, 2 screw with PVC box fix on wall complete all as specified and as directed.
65
-
-
Supply and fix switch socket combination 2 pin & 3 pin 5 Amp, 230 volt, multipurpose, 2 screw complete all as specified and as directed.
15
-
-
Supply and fix socket 2 pin & 5 pin 5 Amp, 230 volt, complete all as specified and as directed.
5
-
-
Supply and fix switch socket combination 5 in 1 type, 3 pin 5 / 16Amp, 230 volt, multipurpose, 4 screws with PVC box to fix on wall complete all as specified and as directed.
20
-
-
Supply and fix switch socket combination 5 in 1 type, 3 pin 5 / 16Amp, 230 volt, complete all as specified and as directed.
10
-
-
Supply and fixing of switch paino, flush type, single pole, two way, 5/6 Amp, complete all as specified and as directed.
4
-
-
Supply and fix in repair Modular AC Box unbreakable heavy duty with ISI plig top with protected type 2 pin and earth plug and complete socket with one MCB SP 240 volt, 20 Amps completeall as specified & directed.
5
-
-
Supply and fix in repair of 10 W LED tubelight fitting with lamp thermal condutive material PC Diffuser, efficiency 100 lm/ W, glare free, THD10%,Potted electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Make-Crompton cat part CCS-103-10-65-SL-DP-NWH/ Havells cat part No. LUMILINEPLUSBS10WLED865SPCSSIND/ Philips cat part No. BN 021 LED12S 6500 PSU GR
120
-
-
Supply and fix in repair of 10 Watt LED Bulk Head fitting Environmenatal friendly pressure die cast aluminium housing,IP-65, ultra morden, energy saving, surface mounted, decorative oval bulk head edge- lit LED luminaries comprising of high brightness LEDs complete all as specified and as directed. Make-Crompton cat part No.- LBHE-10-WW/ Havells cat part No. HEXAFT 10 W LED 857SSYMBOPC/ Philips cat part No. WT202W LED6S NW PSU S2 PC
12
-
-
Supply and fix in repair of 20 W LED tubelight fitting with lamp,Extruded aluminium, PC Diffuser, efficiency 125 lm/ W, glare free, THD10%,Potted electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Make-
(i) Crompton cat part CCS-100-20-65-HLL-OP-NWH
(ii) Havells cat part No LUMILINEPLUSNEOBS20WLED865SPCSSIND
(iii) Philips cat part No. BN170C LED20S-6500 PSU L120
610
-
-
Supply and fix aesthetically designed 2X2 LED flat panel for ceiling mounting which provides soft light and glare free illumination not less than 36 watt,efficiency 125 lm/ W, including and connecting up all as specified and as directed.
Make Havells cat part No.VENUSNEO2X2PLR36WLED865PO/ Crompton cat part No. TCR-145-36-65-SL-NWH/ Philips cat part No. RC360B LED36S-6500 V1 L60W60 PSU OD
25
-
-
S&F in repairs round/square shape 9 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light 100 LN/watt complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size as per site requirement complete all as specified and as directed. Crompton cat part No. LCDEP-09-CDL, Havells Cat part No. INTEGRANXTDLSQ9WLED865S/ Philips cat part No. DN295B LED10S-6500 PSE WH S1
15
-
-
S&F in repair round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size as per site requirement complete all as specified and as directed.
Make: Crompton cat part No. LCDEP-12-CDL/ Havells Cat part No. INTEGRANXTDLSQ12WLED865S/ Philips cat Part No. DN296B LED12S-6500 PSE WH S1
10
-
-
S&F in repair round/square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size as per site requirement complete all as specified and as directed. Make: Crompton cat part No. LCDEP-15-CDL/ Havells Cat part No. INTEGRANXTDLSQ15WLED865S/ Philips cat part No. DN296B LED15S-6500 PSE WH S1
10
-
-
S&F in repairs round shape 18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size as per site requirement complete all as specified and as directed. Make: Crompton cat part No. LCDEP-18-CDL/ Havells Cat part No. INTEGRANXTDLSQ18WLED865S/ Philips cat Part No. DN296B LED20S-6500 PSE WH S1
10
-
-
S&F 18 watt ultra bright LED PLL with very high efficiency suited for installation in existing 2G11 lamp holder to give glare free light LED retrofit ultra bright complete all as specified and as directed.
35
-
-
Supply and fix in repair Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-43, IK-09 protection with mod insulated rated bus bar and 2.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete all as specified and as directed.
3
-
-
Supply and fix in repair of Factory made sheet metal enclosure for DBs single door (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-43, IK-09 protection with Mod insulated rated bus bar and 2.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified and as directed.
3
-
-
Supply and fix in repair of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-43, IK-09 protection with mod insulated rated bus bar and 4.0 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified and as directed.
2
-
-
Supply and fix in repair of MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, as complete all as specified and as directed.
30
-
-
Supply and fix in repair of MCB 32 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, as, complete all as specified and as directed..
10
-
-
Supply and fix in repair of MCB 40Amp, 415 Volt, TPN, breaking capacity 10 KA 'C' series, as complete all as specified and as directed.
5
-
-
M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galavanised lead wire 4.0 mm dia (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel as per SSR part-I complete all as specified and as directed.
Note- Earthwork,strip protection,strip upto 7.5 meter are also included in quoted rate.
6
-
-
Supply and fixing of sub main wiring with two run of 4.0 Sq. mm PVC sheathed, copper conductor cable, 1100 Volt, FRLSH grade and one run of copper earth wire 4.0 Sq mm FRLSH grade drawn through PVC casing and caping, complete all as specified and as directed.
Note : Copper conductor 2 run and one run of copper earth wire along with PVC casing and caping shall be measured as one length.
95
-
-
supply and fix of sub main wiring with two run of 6.0 Sq. mm PVC sheathed, copper conductor cable, 1100 Volt, FRLSH grade and one run of copper earth wire 6.0 Sq mm FRLSH grade drawn through PVC casing and caping, complete all as specified and as directed.
Note : Copper conductor 2 run and one run of copper earth wire along with PVC casing and caping shall be measured as one length.
65
-
-
Taking down the complete hanging lamp fitting of any type and any location and refixing the same with accessories, including provision for cable from ceilling rose to fitting complete all as specified and as directed.
110
-
-
Supply and fix in repair 15 Amp Switch single pole, batten/porclean base complete all as specified and as directed.
30
-
-
Supply and fix in replacement of LED Bldg security light 25W,110 Lm/watt,IP-66 protection made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded cover toughned glass having top opening separate driver compartment with IP 66 protection with inbuilt surge protector and impact resistance of IK07 complete all as specified and as directed by Engineer-in-charge. Make-Havells Cat part No. ENDURASUNDOWNSL25W LED765PASYBOTGIHD/ Crompton- LSTS-25-CDL-M /
Philips cat part No BRP042PLED25CWPSUGRP4210 or equivalent to wipro
10
-
-
Supply and fix in repair of switch paino, flush type, single pole, one way, 5/6 Amp, complete all as specified & as directed.
500
-
-
Supply and fix in repair of ceiling rose, surface Bakelite 65 x 30mm, three terminals, complete all as specified & as directed.
20
-
-
Supply and fix in repair of bell push, 5 Amp, 230Volt, complete all as specified & as directed.
10
-
-
Supply and fix in repair of bell electric Ding Dong type, Ac 230 volts fixed complete all as specified & as directed.
10
-
-
Supply and fix in repair switch socket combination 2 pin & 3 pin 5 Amp, 230 volt, multipurpose, 2 screw to fix on board complete all as specified and as directed.
410
-
-
Supply and fix in repair switch socket combination 5 in 1 type, 3 pin 5 / 16Amp, 230 volt, multipurpose, 4 screws to fix on board complete all as specified and as directed.
310
-
-
Supply and fix PVC rectangular block for mounting, switches, sockets, fan regurators etc with 3 mm thick plastic laminated sheet cover of size 100mmX100mm and 50 mm deep complete all as specified and as directed.
10
-
-
Supply and fix PVC rectangular block for mounting, switches, sockets, fan regurators etc with 3 mm thick plastic laminated sheet cover of size 175mmX100mm and 50 mm deep complete all as specified and as directed.
10
-
-
Supply and fix in repair LED retrofit lamp B22 holder base with polycarbonate body and aluminium heat sink of 09 Watt complete all as specified and as directed. Make :/Havells/Philips/Crompton
280
-
-
Supply and fix in repair angle holder for LED bulb of any type complete all as specified and as directed.
50
-
-
Taking down un-serviceable sub main wiring of any type and any size and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour of the wall with wash/paint/distemper whenever required(as per the existing condition) complete all as specified and as directed by Engr-in-charge.
160
-
-
Supply & fixing in repair Bldg security light bracket fabricated from 25mm dia medium grade GI pipe bent to shape not exceeding 1.5mtr long alongwith 2 Nos clamps of size 32x6mm flat iron and including nuts, bolts, washers suitable for fixing on Buildings including 2 coats of synethic enamel paint over a coat of red oxide primer complete all as specified and as directed.
5
-
-
Supply & fixing in replacement LED Highbay light 80 watt energy saving,enviroment friendly & robust Mediumbay wih high efficiency(110 lm/w),10KV SPD, IP-66 protection with toughened glass complete all as specified and as directed.
10
-
-
Taking down the Exhaust fan/wall mounting fan heavy duty of 300/250/ 200 mm sweep by disconnecting from the ceiling rose, carrying out necessay repair such as replacement of capacitor/ bearings/ flexible copper cable of suitable size including overhauling by carrying out repair such as applying grease to metal parts, rewinding of burnt coil and replacement of suitable size cotter/split pin as required, reassembling and refixing in original position, fixing of louvers/wire mesh commissioning, testing complete all as specified and as directed by Engr-in-Charge. Notes :- (a) Rewinding of Exhaust fans and spares shall be replaced and measured and paid seperately under relevent items of schedule.
(b) Rate deemed to be inclusive of new flexible copper wire between ceiling rose to fan connector no extra claim what so ever will be entertained by the department.
130
-
-
Supply and fix in repair exhaust fan capacitor 4 mfd of approved make complete all as specified and as directed by Engineer-in-Charge. MAKE : NICCO/Universal/Havells/sarada
120
-
-
Rewinding of exhaust fan motor of type 300 mm sweep & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. complete all as specified and as directed by Engineer- in -Charge.
30
-
-
Rewinding of exhaust fan motor of type 250 mm sweep & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. complete all as specified and as directed by Engineer- in -Charge.
25
-
-
Rewinding of exhaust fan motor of type 200 mm sweep & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. complete all as specified and as directed by Engineer- in -Charge.
20
-
-
M&L for spray painting with white synthetic enameled paint (1st grade quality) after preparation of old surface of the exhaust fan of any make/model/sweep, including filling cavities with filler after cleaning dust complete all as specified and as as directed.
30
-
-
Supply and fix in repair of new ball bearing 6201 / 6202 / 6203 including metal filling, machining if required, complete all as specified and as directed.
Make : SKF/NBC
210
-
-
Taking down the storage type water heater of any type & size, by disconnecting electric connection, carrying out necessary repair such as cleaning of inner water tank, removing scales,connecting flexible three core copper cable of size 2.5 sqmm and re - fixing in original position, grouting, testing and commissioning, complete all as specified and as directed. Notes : (i) spares replaced shall be measured and paid seperately under supply only under relevant item of this schedule.
45
-
-
M&L for spray painting with white synthetic enameled paint (1st grade quality) after preparation of old surface of geyser of any make/model., complete all as specified and as directed by Engineer-in-charge.
60
-
-
Supply and fix in repair indicating lamp for geyser, including dismantling the existing u/s element, complete all as specified and as directed.
50
-
-
S&F in repair 3 pin plug top of 15 Amp, complete all as specified and as directed by Engineer-in-Charge.
10
-
-
S&F in repair heating element 2000 Watt capacity, 230 Volts, round / triangle base suitable for existing water heater of 50 litre capacity complete all as specified and as directed.
30
-
-
S&F in repair heating element 1500 Watt capacity, 230 Volts, round / triangle base suitable for existing water heater of 25 litre capacity complete all as specified and as directed.
25
-
-
S&F in repair 15mm dia PVC flexible connections (heavy duty) with two Nos brass nuts with washer at both ends of 450mm long, complete all as specified and as directed.
20
-
-
Supply and fix in repair GI pipe medium grade of 15mm dia with all fittings such as bends, elbow,tees,short pieces, connector , back-nuts, diminishing pieces, caps, plugs and unions, etc. complete all as specified and as directed by Engr-in-Charge.
10
-
-
Supply & fix in repair stop valves of 15mm size, cast copper alloy, screwed down, high pressure with crunch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engr-In-Charge.
10
-
-
Supply and fix in repair of Thermostat of capacity 1500/2000Watt for geyser of any capacity complete all as specified and as directed by Engr-in-Charge.
35
-
-
S& F in repair of geyser copper inner tank of 25 Ltr capacity complete all as specified and as directed.
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements