Indian Oil Corporation Limited Tender

Extra for levelling & neatly dressing of disposed soil completely as directed by engineer in charge

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level : 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm

Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations,footings,bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, buttress, plinth and string courses etc.

MECHANICAL WORKS : Pipeline Supply & laying

Dismantling and shifting to the place as directed by Engineering Inchage within plant premises Dismantling of Pipeline 300 NB

LAYING & WELDING OF FIRE HYDRANT PIPELINES (ABOVE GROUND) IN ZONE B Laying and welding (3 runs minm.) Above Ground Pipelines from suppliedMS pipes (pipes to be supplied anywhere within the depot and thecontractor shall shift the same to the site of work at no extra costwith all leads and lifts) of the following sizes as described below,including cutting, bevelling and fixing the supplied specials such as elbows, bends, tees, reducers, etc complete and successful hydro testing the pipeline at a pressure of 10.5 kg/cm2 for a minimum period of 4 Hrs.The job includes Dye Penetration (DP) testing of pipeline joints as per approved QAP. Above ground pipeline to be laid on concrete pedestals (which is to beconstructed as per the respective item of this schedule)/ piperacks/Fire Hydrant pump house & manifolds and Painting the pipeline as per the specifications enclosed including the colour coding as per IOC specifications. Note: a. Any repairs to the defective welding shall be made good at no extracost to IOCL. b. The rates quoted also to include Painting and colour coding ofpipelines as per the standards. c. For the sizes of piping below 150 mm, direct stub connection shall bemade on the headers with suitable pad plates and the rate quoted should include the same. Painting Scheme : Application for External painting shall be carriedout by means of AIRLESS SPRAY PAINTING SYSTEM only.1. Surface Preparation as per SA 2½, 2. Primer : P3- Red Oxide Zinc Phosphate Primer - 2 Coats (30-35µeach), DFT 60-70µ3. Finish Coat : F2- Aluminium Finish Paint - 2 Coats (15-20µ each), DFT 30-40µTotal Min DFT 90µ"

Installation, testing & commissioning of 300NB Fire hydrant pipeline as per IS 358 supplied by IOC

Installation, testing & commissioning of 150NB Fire hydrant pipeline as per IS 358 supplied by IOC

Installation, testing & commissioning of 100NB Fire hydrant pipeline as per IS 358 supplied by IOC

SUPPLY OF PIPE API5L GR B ERW 300MM 6.35MM THK TENSILE STRESS 414 MPA PIPE OD 323.80 MM SCHEDULE 20, WEIGHT 49.71 KG/M

SUPPLY OF MS PIPE: IS-1239 Gr. C Heavy Duty - 150 mm dia

SUPPLY OF MS PIPE: IS-1239 Gr. C Heavy Duty - 100 mm dia

PIPE FITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducermade of carbon steel seamless pipes with bevelled ends as per enclosedspecifications for the following sizes Note: The fittings shall be asper ASTM A 234 Grade WPB schedule 40 and dimensions as per ASME B 16.5.Note: The quantities given are only indicative.The actual quantities tobe supplied will be based on the finalised drawing for pipeline routing.90 Deg LR ELBOW (1.5D) : 300 mm dia

PIPE FITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducermade of carbon steel seamless pipes with bevelled ends as per enclosedspecifications for the following sizes Note: The fittings shall be asper ASTM A 234 Grade WPB schedule 40 and dimensions as per ASME B 16.5.Note: The quantities given are only indicative.The actual quantities tobe supplied will be based on the finalised drawing for pipeline routing.45 Deg LR ELBOW (1.5D) : 300 mm dia

PIPE FITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducermade of carbon steel seamless pipes with bevelled ends as per enclosedspecifications for the following sizes Note: The fittings shall be asper ASTM A 234 Grade WPB schedule 40 and dimensions as per ASME B 16.5.Note: The quantities given are only indicative.The actual quantities tobe supplied will be based on the finalised drawing for pipeline routing.90 Deg LR ELBOW (1.5D) :150 mm dia

PIPE FITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducermade of carbon steel seamless pipes with bevelled ends as per enclosedspecifications for the following sizes Note: The fittings shall be asper ASTM A 234 Grade WPB schedule 40 and dimensions as per ASME B 16.5.Note: The quantities given are only indicative.The actual quantities tobe supplied will be based on the finalised drawing for pipeline routing.90 Deg LR ELBOW (1.5D) : 100 mm dia

SUPPLY OF MS PIPE: IS-1239 Gr. C Heavy Duty - 25mm dia