Urban Improvement Trust Tender

Transportation of excavated of earth from site including loading unloading etc. complete with all lead and lift.

Silt clearance of drains channels and canals with lift 1.5 Mtr. And lead upto to 50 Mtr.

Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering – All work upto plinth level. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Random Rubble stone masonry for foundation and plinth in Cement sand mortar above 30cm thick wall in : Cement Mortar 1:6 (1 cement : 6 sand)

Cement concrete flooring grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg.) rounding off edges etc. but excluding the cost of nosing of steps etc. complete : 50 mm thick with 20mm thick nominal size agg.

Rough chisel dressed stone flooring over 20 mm (Av.) thick base in CM 1:6 including pointing with cement mortar 1:2 (1 cemet : 2 stone dust) with and admixure of pigment to match the shade of stone with joint thickness upto 15 mm : 35 mm thick red sand stone.

Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1% solution of water-proof compound) excluding two coats of hot blown bitumen (2 kg per sqm) complete as per specification without glass strip 3mm thick at a distance of 1m interval. 50mm thick.

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. : 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing, compaction, finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement - All work up to plinth level : 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Hot rolled deformed bars (IS : 1139).

Centering & shuttering with plywood or steel sheets including strutting, propping, bracing bothways with wooden members and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns etc. upto plinth level.

Plaster on new surface on walls in cement sand mortar 1 : 6 including racking of joints etc. complete fine finish : 20 mm thick.

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick

Providing stone slab covering over drains including filling of joints in cement sand mortar 1:3 with 35mm thick cement concrete flooring 1:2:4 mix complete with good finish with: Stone slab 40 to 50mm thick average.

Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.

Providing and fixing of Reinforced Ferro-Cement Drain cover designed of class ‘A’ & ‘AA’ loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti-corrosive bitumen painted MS plate, Rim an on MS lifting hooks, admixture like plasticizer bond-improving compound, shrinkage resistance compound, abrasion resistant complete as per approved design etc. Class ‘A’ loading 'Span 300mm to 450mm, Standard size 600×800mm,

Span 451mm to 700mm, Standard size 1000×800mm,

Providing and laying reinforced cement concrete pipe NP-3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. 600mm dia.

S & FCC 1:2:4 (M15) Precast kerb on dand upto 60 cm length over 20 mm thick base of cement mortar 1:6 including jointing, earthwork painting and jointing with cement mortar 1:4 size. 15 x 40 cm

Providing and fixing of precast concrete interlocking blocks of 80 mm thick (M-30 Grade) manufactured from fully computerized automatic stationery hydraulic vibro peressed machine & full computerized automatic batching plant of class A-1 as per BS :6717-2001.the CC interlocking paving blocks be laid on average 50 mm thick bed of coarse sand and the joint is to be filled with fine sand.Laying procedure on compected sub base as defined. the work includes earth work in cutting of B/T road , cutting of WBM road and disposal of unserviceable Material with all leads & lifts and stacking of serviceable material complete . job is to be executed as per the instructions of Engineer -in- charge.The rates to be inclusive of all lead ,lifts & taxes General information of Blocks: 1.Shape: As specified by Engineer-in-charge 2. Tensile splitting strength and breaking load as per BS 6717-2001. 3.Colour : Grey cement natural colour. 4. Variation in dimension :less than 1.6 mm. 5.Variation in thickness :Less than 3.2 mm.

Laying cement concrete Pipe NP3 (burried conduits ) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation , protection works , backfillingg , concrete and masonary work in head wall and parapets 500 mm dia

300 mm dia