Urban Improvement Trust Tender

SURFING BOARD Providing and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 1400mm (Height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from G.1. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. 1. (The cement concrete and excavation work shall be including.)

THAI-CHI SPINNER (2 WHEEL) Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less thal 700mm (Length) x 1000mm (width) x 1280mm (hight), to increase mobiltiy of shoulder elbow and hip-knee. The main structure frame shall be made from G.I pipe minimum of 80 BN "C" class welded with M.S. round base plate atleast 250mm & 10 mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder casting shall be done with pure plyester powders from ackzonoble/Berger/Nerolac paint. with 60 to 70 micron thickness, complete in all respect including fixing the M.S. hodfast in cement concrete to hold the whole structure, under the direction of Engineer-in-charge to fullfil the functional requirement. 1. (The cement concrete and excavation work shall be including)

LEG PRESS Providing and fixing of leg press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height) to build up the muscles of thigh and enhence the strength of waist. The mian structure frame shall be made from G.I. Pipe minimum of 80NB "C" class welded with M.S. roaund base plate atlesat 250mm & 10mm thick. The Sleeve frame minimum of 100 OD and M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm x 310mm x 5mm thick. Closing caps shall be made up of high quality Fiber rainforced plastic material. High tensile steel with galvainzed nuts and bolts shall be used for assembly. The powder casting shall be done with Pure Plyester powders of Ackzonoble/Berger/ Nerolac with 60 to 70 Mircon thickness, complete in all respet including fixing the M.S. holdfast in cement conrete to hold the whole strucute, under the directins of Engineer-in-charge to fullfil the functional requirements. 1. (The cement concrete and excavation work shall be including.)