Rajasthan Technical University Tender

Face Recognition Terminal with Multiple Method Authentication for recording attendance: Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed • 4.3-inch touch screen 720p wide-angle dual-lens • Face anti-spoofing • Face recognition distance: 0.3 m to 1.5 m • 1500 face capacity, 1,500 card capacity, 1,500 fingerprint capacity (should be supported by device model) and 150,000 event capacity • Face recognition duration 0.2 s/User; face recognition accuracy rate ≥ 99% • Capture linkage and captured pictures storage • Transmits card and user data from or to the client software via TCP/IP protocol and saves the data on the client software • Imports pictures from the USB flash drive to the device or export pictures, events, from the device to the USB flash drive • Stand-alone operation • Manage, search and set device data after logging in the device locally • Connects to one external card reader via RS-485 protocol • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed • Connects to external access controller or Wiegand card reader via Wiegand protocol • Two-way audio with indoor station and master station • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out • Supports multiple languages (Hindi/English) • Configuration via the web client • Remotely opens door and starts live view • Resolution 800x 480 • Operation Method: Capacitive Touch Screen • Video Standard: PAL and NTSC • Wired network 10 M/100 M/1000 M self-adaptive • Network interface × 1, RJ45 • Lock output × 1 • Exit button × 1 • Door contact input × 1 • Power interface × 1 • TAMPER × 1 • USB × 1, USB2.0 • Live view Supports live view on the platform, H.264 • Face recognition Supports face recognition in low illumination • Access control management Supports multiple authentication methods • Protective level IP65 • With Power Unit for connecting to 230v, 1phase AC power outlet Warranty Period: 36 Months

Face recognition terminal with temperature screening function: • Uncooled sensor to measure target's temperature • Display Size and Type: 7” with capacitive Touch Screen • Camera: 2 MP with Dual Lens • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C • Recognition distance Device Should Support: up to 1.8 m • Fast temperature measurement mode: Detects face and takes temperature without identity authentication • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed • Displays temperature measurement results on the authentication page • Triggers voice prompt when detecting abnormal temperature • Configurable door status (open/close) when detecting abnormal temperature (Optional) • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software • Face recognition duration 0.35 s/User; face recognition accuracy rate ≥ 99% • More than 5000 face capacity, More than 5000 card capacity, and More than 95000 event capacity • Suggested height for face recognition: between 1.4 m and 1.9 m • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out • Watchdog design and tamper function • Audio prompt for authentication result • NTP, manually time synchronization, and auto synchronization • Connects to external access controller or Wiegand card reader via Wiegand protocol • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed • Imports and export data to the device from the client software • Wired network 10 M/100 M/1000 M self-adaptive • Network interface × 1, RJ45 • With Power Unit for connecting to 230v, 1phase AC power outlet • Mounting Option: Floor and Table with necessary brackets for mounting • Lock output × 1 • Exit button × 1 • Door contact input × 1 • IO Input × 1 • IO Output × 1 • TAMPER × 1 Warranty Period: 36 Months

Tripod for mounting: Adjustable Height, Foldable steel arms, with cover, load carrying capacity up to 5 kg, Item No. 2. Should Provide making the mounted system mobile freely. Warranty Period: 36 Months