Public Health Engineering Department Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Technical
Technical
Financial
Work Experience Requirements
... View More
The Eligibility requirements mentioned in the tender are: 1. Experience Criteria: - Execution and successful commissioning of one of the following: a) Three similar works each costing not less than 30% of the estimated cost of bid b) Two similar works each costing not less than 40% of the estimated cost of bid c) One similar work costing not less than 50% of the estimated cost of bid - Construction Experience of Key Components: - Pipeline: experience of laying, jointing, testing, and commissioning of pipeline with a minimum nominal diameter of 1/3rd of the largest proposed nominal diameter and for a minimum length of 1/5th of the largest proposed nominal diameter - Pumping Machinery: experience of installation/replacement and commissioning of pumping machineries including EMI works (cumulative in KW) of minimum 1/5th of cumulative capacities (in KW) of the largest single pump house 2. Past Performance: - Certificate from client, copy of work order Values and percentages mentioned for Eligibility requirements:
- 30% of the estimated cost of bid
- 40% of the estimated cost of bid
- 50% of the estimated cost of bid
- 1/3rd of the largest proposed nominal diameter
- 1/5th of the largest proposed nominal diameter
- 1/5th of cumulative capacities (in KW) of the largest single pump house
- 233.33 MM (required nominal diameter)
- 1384.4 Mtr (required length of pipeline)
- 194.80 KW (required experience for pumping machinery)
- 49.79 Km (maximum required length of pipeline) Technical certification required by the bidder to participate in this tender:
- Certificate from a Chartered Accountant regarding the net worth of the company as on the last date of the previous financial year
- Certificate from client for O&M experience
- Copy of work order for O&M experience
- Certificate from the Chartered Accountant with a Unique Document Identification Number (UDIN) for financial stability
- Notarized affidavit on Rs. 500/- non-judicial stamp paper for financial stability
- Experience certificate issued by an officer not below the rank of Executive Engineer or equivalent for the work awarded by State Governments/Central Government or their undertakings and autonomous bodies
- Powers of attorney, attested by a notary on stamp paper of Rs 500
- Evidence of experience of the firm in similar jobs
- Audited balance sheets and profit and loss statements for the last 3 financial years
- Sanction letter of overdraft facilities with the Banker(s) / Financial Institution(s)
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is Class "AA" or above in PHED, Rajasthan.
Bid Capacity
... View More
The bid capacity required in the given tender to bid can be calculated using the formula: Bidding Capacity = 3 x A x N – B, where A is the maximum annual turnover of the bidder, N is the stipulated period of execution of the contract, and B is the liability of present works in hand. The value of Bidding Capacity should not be less than the Bid cost of the work, which is Rs 210.11 Crore. For a Single Entity, the requirement is to meet this value, while for a Joint Venture, the Lead partner must meet at least 51% of the requirement (Rs 107.155 Cr) and one member must meet at least 10% of the requirement (Rs 21.011 Cr). Additionally, the bid capacity required can also be determined based on technical experience criteria, including:
- Three similar works each costing not less than 30% of the estimated cost of the bid.
- Two similar works each costing not less than 40% of the estimated cost of the bid.
- One similar work costing not less than 50% of the estimated cost of the bid.
- Pipeline experience with a minimum nominal diameter of 1/3rd of the largest proposed nominal diameter pipeline for a minimum length of 1/5th of the largest proposed pipeline length.
- Experience in all diameters (minimum nominal diameter 75 mm) equal to 1/5th of the total length of the pipeline proposed under the tender. The formulas for calculation are:
- Three similar works: 3 * 0.3 * Bid Value
- Two similar works: 2 * 0.4 * Bid Value
- One similar work: 1 * 0.5 * Bid Value
- Pipeline experience: Minimum nominal diameter of 1/3 * Maximum pipeline diameter, for a length of 1/5 * Maximum pipeline length, and 1/5 * Total pipeline length for all diameters >= 75 mm.
Costs
EMD
₹ 4,20,22,000Document Cost
₹ 50,000Tender Fee
₹ 2,500
Summary
Construction Of 02 No Rcc Intake Well Of 15mtr Diameter With Approach Bridge On Either Bank Or River And Transmission Main, Wtp, Etc And 10 Years
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PHCJA_450101_1Tender No
ACE JHA NIT NO. 04/2024-25Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://https://phedwater.rajasthan.gov.in/phed
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
b. Hard rock (requiring blasting) Useful material 30%
7309.3
372
2719059.6
... More
Add extra for every additional lift of 1.5 m or part thereof : . In ordinary rock & hard rock
-
-
-
... More
Lift 1.5 m to 3.0m
2876.3
26
75934.32
... More
Lift 3.0m to 4.5m
729.9
52
38538.72
... More
Lift 4.5m to 6.0m
729.9
79
57808.08
... More
Lift 6.0m to 7.0m
243.3
105
25692.48
... More
Earth work in rough (borrow area) excavation for embankments in hard soil, morrum or highly weathered strata dry or moist, including laying in 20 cm layers (before ompaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted by sheep foot roller/pneumatic tyred roller to obtain dry density of at least 98% of Standard Proctor's density with initial lift of 1.5m (Excluding charges for compaction and watering ) including loading and un-loading wherever required complete in all respect.
458.3
113
51787.9
... More
Providing & laying in position cement concrete including curring, compaction etc. complete in specified grade excluding the cost of centering & shuttering. All work up to plinth level. M-15 grade with 20mm nominal size aggregates
223.9
3390
759021
... More
Providing & laying in position specific grade of reinforced cement concrete including curring, compaction finishing with rendering in cement sand mortar 1:3 and making good the joints excluding the cost of centering, shuttering & reinforcement-. All work up to plinth level. M-30 grade with 20mm nominal size aggregates
865.7
4537
3927680.9
... More
Reinforcement cement concrete work in wall (any thickness) including attached Providing & laying in position specific grade of reinforced cement concrete including curring, compaction finishing with rendering in cement sand mortar 1:3 and making good the joints excluding the cost of centering, shuttering & reinforcement-. All work up to plinth level. M-30 grade with 20mm nominal size aggregates
1985.5
4791
9512530.5
... More
Add extra for RCC work in superstructure above floor three level for each subsquent floor level or part thereof for item No 4.2 to 4.7
-
-
-
... More
a. Floor three level (10.5m) to Floor four level (14.0m)
1072.2
32
34900.11
... More
b. Floor four level (14.0m) to Floor five level (17.50m)
278
65
18097.8
... More
c. Floor five level (17.5m) to Floor six level (21.0m)
278
97
27146.7
... More
d. Floor six level (17.5m) to Floor seven level (21.0m)
278
130
36195.6
... More
d. Floor seven level (21m) to Floor eight level (22.5m)
79.4
162
12922.35
... More
Reinforcement cement concrete work in beams, suspended floors, roofs, girders having slope upto 15deg, landing, balconies, shelves, chhajas, lintels, bands, plain window sills, staircase & spiral staircase, up to floor three level including curring, compaction finishing with rendering in cement sand mortar 1:3 and making good the joints excluding the cost of centering, shuttering & reinforcement-. with M-30 grade with 20mm nominal size aggregates
1506.8
4615
6953882
... More
Add extra for RCC work in superstructure above floor three level for each subsquent floor level or part thereof
-
-
-
... More
a. Floor four level (22 m) to Floor five level (24.5 m)
101.8
195
19881.54
... More
b. Floor five level (24.5m) to Floor six level (28m)
142.5
227
32468.63
... More
c. Floor five level (28m) to Floor six level (31.5m)
142.5
260
37107
... More
Reinforcement cement concrete work in Bridge including attached Providing & laying in position specific grade of reinforced cement concrete including curring, compaction finishing with rendering in cement sand mortar 1:3 and making good the joints excluding the cost of centering, shuttering & reinforcement-. All work up to plinth level. M-30 grade with 20mm nominal size aggregates
4748
4176
19827648
... More
Add extra for RCC work in superstructure above floor three level for each subsquent floor level or part thereof
-
-
-
... More
a. Floor three level (10.5m) to Floor four level (14.0m)
1272.2
32
41410.11
... More
b. Floor four level (14.0m) to Floor five level (17.50m)
284.2
65
18501.42
... More
c. Floor five level (17.5m) to Floor six level (21.0m)
137.2
97
13397.58
... More
d. Floor six level (17.5m) to Floor seven level (21.0m)
21.2
130
2760.24
... More
Centering & shuttering with plywood or steel sheets including strutting, propping, bracing bothways and remival of formwork for foundtions in basement raft, footings, strap beam, base of column etc up to plinth level
1188.9
218
259180.2
... More
Centering & shuttering with plywood or steel sheets including strutting, propping, bracing bothways with wooden members and removal of formwork for super structure up to 4.5m height above plinth for
-
-
-
... More
Walls any thickness including attached pilasters, butteress plinth & string course.
6261.9
191
1196022.9
... More
Add extra for shuttering in circular work in plan up to dia 10m over item no 4.12.1
1565.5
16
25048
... More
Suspended floors, roofs, landings, stairecase, balconies, girders, cantilevers, bands, coping, chhajas, bed plates, anchor blocks, sills, lintels beams etc.
140
191
26740
... More
Add extra for shuttering in circular work in plan up to dia 10m over item no 4.12.2
35
15
525
... More
Columns, pillars, posts and struts etc.
6745.2
263
1773987.6
... More
Add extra for every additional 1 meter height or part thereof beyond 4.5mtr of shuttering
-
-
-
... More
a. 4.5 m - 5.5m
208
16
3328
... More
b. 5.5m -6.5m
208
32
6656
... More
c. 6.5m- 7.5m
208
48
9984
... More
d. 7.5m - 8.5m
208
64
13312
... More
e. 8.5m-9.5m
208
80
16640
... More
f. 9.5m-10.5m
208
96
19968
... More
g. 10.5m- 11.5m
208
112
23296
... More
h. 11.5m-12.5m
208
128
26624
... More
i. 12.5m-13.5m
208
144
29952
... More
j. 13.5m-14.5m
198.4
160
31744
... More
k. 14.5m-15.5m
198.4
176
34918.4
... More
l. 15.5m-16.5m
198.4
192
38092.8
... More
l. 16.5m-17.5m
198.4
208
41267.2
... More
m. 17.5m-18.5m
198.4
224
44441.6
... More
n. 18.5m-19.5m
198.4
240
47616
... More
o. 19.5m-20.5m
198.4
256
50790.4
... More
p. 20.5m-21.5m
198.4
272
53964.8
... More
q. 21.5m-22.5m
198.4
288
57139.2
... More
r. 22.5m-28.5m
208.5
304
63384
... More
Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.
-
-
-
... More
Thermo-mechanicall treated bars (Tata, Sail)
1294978.21
77
99713322.17
... More
Add extra over item no 4.13 in superstructure above floor three level for each subsquent floor level or part thereof.
-
-
-
... More
a. Floor three level (10.5m) to Floor four level (14.0m)
152114.2
2
304228.4
... More
b. Floor four level (14.0m) to Floor five level (17.50m)
55164.7
4
220658.8
... More
c. Floor five level (17.5m) to Floor six level (21.0m)
40741.3
6
244447.8
... More
d. Floor six level (21.5m) to Floor seven level (25.0m)
9871.3
8
78970.4
... More
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor Three level in all shapes and sizes in : Cement mortar 1 : 3 (1 cement : 3 coarse sand)
64.7
3656
236543.2
... More
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design & IS 6248- 1979. (Clear openable area to be measured for payment).
11.2
1943
21761.6
... More
Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13*3 mm, 10 cm. long embedded in cement concrete block 15*10*10 cm of 1:3:6 or with wooden plugs and screws or with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 3 mm thick with glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required.Partly fixed and partly openable [Fixed are not to exceed 33 %].
-
-
-
... More
A.Partly fixed & partly openable
34.3
1772
60779.6
... More
Add extra for Providing brass handles/peg stays and fittings inplace of oxidised fitting.for doors and windows
34.3
88
3038.98
... More
Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not excceding 150 mm distance.
18
454
8172
... More
Providing and fixing square bars or other flat welded to window, ventilators etc.
239.8
69
16546.2
... More
P&F frame for doors and windows of EZ-7 section ISI marked section welded at corners and dully painted with red oxide paint, frame to be fixed by MS flat 230x16x3mm size holdfast embeded in cement concrete block M100 size 230x115x75mm with oxidised iron 100mm round hinges screwed and welded complete in all respect as per design with priming coat of red oxide.
145
90
13050
... More
Supply & fixing in cement mortar welded hand railing made of MS round or square bars, flats etc. for staircase, varandha as per design complete in all respect with priming coat of redoxide paint
1940
80
155200
... More
P&F steel gate, gratings, grils made of angles, tees, square bars or other flats, black pipe with holdfast and fittings complte as per design and drawng including cutting, welding & fabrication with priming coat of red oxide.
152
81
12312
... More
P&L lime dhar only 90mm thick average on roofs on ground floor with 1:2:2:2 ( 1 lime putty:2 surkhi or sand : 2 old lime mortar powder :2 stone grit 12mm to 20mm) mix by volume with require qantity of gur, gugal, methi, hemp etc.. Properly compacted and smoothly finished in all respect ( Jaipur Practice) as per specification
594.3
427
253766.1
... More
Cement concrete flooring Grade 1:2:4 rounding off edges etc. excuding the cost of noising of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate.
192
362
69504
... More
Plaster on new surface on walls in cement sand mortar 1:4 including racking of joint etc. complete fine finished: 20 mm thick
2050.9
144
295329.6
... More
Add extra for plaster done over ceiling
210
50
10500
... More
Add extra over for plaster work on exterior wall of height more than 4.5m from plinth level of every additional height of 4.5M or part thereoff
-
-
-
... More
a. Height 4.5 m to 9.0m
690.4
24
16569.6
... More
b. Height 9.0m to 13.5m
140
48
6720
... More
c. Height 13.5m to 18.0m
140
72
10080
... More
d. Height 18.0m to 22.5m
125
96
12000
... More
e. Height 22.5 to 28.5 m
125
120
15000
... More
Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade to give and even shade including all scaffolding: New Work (Three or more coats.).
2050.9
39
79985.1
... More
Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade:
-
-
-
... More
New wood work (two or more coats).
32.2
60
1932
... More
New steel work (two or more coats).
50
58
2900
... More
Painting with black anti-corrosive bitumenious paint of approved brand and manufacturer to give an even shade.
-
-
-
... More
Two or more coat on new work
1451
46
66746
... More
Fabrication & installation of Gates and Trash Rack at 02 levels as per scope & specification of Tender Document.
2
2081700
4163400
... More
Part-01: Pump House at Intake
-
-
-
... More
Providing, installation, testing and commissioning of Submerged VT Pump sets with motor 4 pole sychronised speed of 1500 rpm ( water immersed, dry air filled, class "F" insulated TEWC motor integrally mounted on volute casing pump sets for drinking water ) 3 phase, +/- 3%, 415 volt +/- 10%, along with suitable foundation/ installation device and with 10 mtr cable, material of construction of impeller SS, casing (volute) CI, wearing ring SS, etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.
-
-
-
... More
Each of capacity 157.72 LPS / 65 m head/155 KW
5
1726015
8630075
... More
Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.
-
-
-
... More
MS pipe specials Above 600 mm dia (with minimum 6.3 mm thickness sheet). For Common Header, Suction, Delivery etc.
17500
129
2257500
... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date)/Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS:1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Motorized Sluice Valves with Electric Actuator and integral starter of Class PN 1.6
-
-
-
... More
350 mm dia
5
220797
1103985
... More
600 mm dia
1
332114
332114
... More
Providing, lowering, laying, aligning, fixing in position CI D/F short body pattern type butterfly valves having body, disc and end cover in graded cast iron generally conforming to (IS13095/1991amended upto date), synthetic rubber faced ring secured on disc by retaining ring with SS steel screw stub shaft of SS riding in teflon bearing including C.C. foundation/ structural steel support, material, labour, testing along with pipe line and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work
-
-
-
... More
350 mm dia
5
192390
961950
... More
Providing, lowering, aligning, fixing in position in pipe line, CI double flanged Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Cover of Grey cast iron of IS:210/ FG200 , Disc / plates - Cast steel ,Disc seal ring of EPDM/ NBR (food grade quality), Body seat of SS ,Face to face dimensions as per API: 594, Flanges Drilled as per IS:1538. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan conforming toType B of IS:341or paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Shaft/Stop Pin of SS- AISI- 304/410 , Hinge SS AISI 316/304 / CS ,Spring SS AISI 316/304 , Bonnet Gasket EPDM, Bush- Brass with EPDM/NBR "O "ring seal.Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) ,Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
Class PN 1.6
-
-
-
... More
350 mm dia
5
53080
265400
... More
Providing, installation, testing and commissioning of following Stain less steel AISI 304 Expansion bellows of 10/16 bar rating with tie rods as per technical specifications and layout drawings including jointing material like nuts, bolts, rubber gaskets etc. complete in all respect as per technical specification and direction of Engineer In-Charge.
-
-
-
... More
350 mm dia.
5
21227
106135
... More
Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete.
12600
63
793800
... More
Supplying, erecting, testing & commissioning of Electrically Operated Travelling Crane (EOT) .Main girder & End Carriage fabricated from Rollled Steel Section, Gear Box for all motion, Electro Magnetic Friction Disc Type Brakes, all safety limit switches , LT wheels EN 9, Double Flanged 4No, with Sq. Cage motor of adequate rating (KW), duly painted mechanical cleaning and one coat of primer and two coat of synthetic paint and as per the direction of the Engineer.
-
-
-
... More
5 MT Capacity (Span 9 M and Lift 6 M)
1
585100
585100
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, Float- LP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside .Fasteners - CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem. Sluice Valves as per (IS: 14846 amended upto date) PN 1.6 ratings. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.Note: Rates are exclusive of connecting tee, pipe piece and earth work.
-
-
-
... More
100 mm dia.
1
20215
20215
... More
Providing, installation, testing and commissioning of glycerin filled Pressure gauge of following ranges with isolation valve and tap off pipe complete in all respect as per technical specification and as per direction of Engineer.
-
-
-
... More
- 1.0 to +1.0 kg/cm²
5
1360
6800
... More
SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and pecifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU), Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. - 600 mm size
Note: Rates are exclusive of tail piece / dismantling joints and earth work.
1
461307
461307
... More
Construction of Chambers for Flow Meter (600 m) as per specifications.
1
60651
60651
... More
Supply, Installation, Testing and commissioning of copper wound Transformers 33/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories with off load tap changer (+5% to -10% in steps of 2.5%), winding / Top --- temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5% of the maximum total loss values for 11 KV as per energy efficiency level - 2 at basic Insulation level conferming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014. Transformers described as above and as per the following continuous rating
-
-
-
... More
1000KVA
2
2154178
4308356
... More
Supply, Installation, Testing and Commissiong of indoor type floor mounted metal clad, 33 KV Incomer VCB panel up to 630 A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 31.5KA/3 and IAC A-FLR for 31.5kA/1sec. Make of HT Panel, Vaccum Interrupter and VCB should be of same make. 33 KV / 110 Volts PT Class 0.5 accuracy and 100 VA burden with 1No. Voltmeter (0-36 KV), analog type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 36 KV on incomer, Ammeter, analog type, selector switches for ammeters, Microprocessor based numerical relay with O/L, E/F and S/C protection, Set of dual core dual ratio 3CTs of suitable ratio with secondary 1A,15 VA burden and accuracy Class – 0.5 for metering and class 5P10 for protection, Multifunction Meter.
2
935179
1870358
... More
Supply, Installation, Testing and Commissiong of indoor type floor mounted metal clad, 33 KV Bus Coupler VCB panel upto 630 A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 31.5KA/3 and Internal Arc test A-FLR for full short circuit current for 1 sec. duration. Make of HT Panel,Vaccum Intrrupter and VCB should be of same Make. Bus Coupler 1 No 630 Amp. VCB
1
1106628
1106628
... More
Supply, Installation, Testing and Commissiong of indoor type floor mounted metal clad, 33 KV outgoing VCB panel up to 630 A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 31.5KA/3 and IAC A-FLR for 31.5kA/1sec. Make of HT Panel, Vaccum Interrupter and VCB should be of same make. 3 KV / 110 Volts PT Class 0.5 accuracy and 100 VA burden with 1No. Voltmeter (0-36 KV), analog type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 36 KV , Ammeter, analog type, selector switches for ammeters, Microprocessor based numerical relay with O/L, E/F and S/C protection, Set of dual core dual ratio 3CTs of suitable ration with sec 1 of 15 VA burden and accuracy Class – 0.5 for metering and class 5P10 for protection, Multifunction Meter
2
865040
1730080
... More
SITC of battery bank of min 150 AH capacity comprising SMF/VRLA batteries , MS / Teakwood battery stand , interconnect wiring etc as required complete in all respect of rating:
-
-
-
... More
110VDC
1
218208
218208
... More
SITC of FCBC ( Float cum boost charger)suitable for 415V +/-10%,50 Hz , 1-ǿ / 3 -ǿ Input & 24/ 48 /110 V DC OutputNatural Cooled, free standing in Sheet Steel enclosure,SCR controlled , regulation +/-1% , Efficiency 75% on FLAC/ DC Instruments, Selector Switch ,Built in DC Distribution Board (6 No MCB), indication , control asrequired of following rating:
-
-
-
... More
25 A + 25 A
3
90993
272979
... More
Earthing Schedule Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 40 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
8
5500
44000
... More
Earthing Schedule Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 40 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
12
2800
33600
... More
GI Pipe, Class B, 40mm Dai with thickness of 3.610mm as per IS 1239 for the complete earthing system
80
250
20000
... More
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
-
-
-
... More
50mm x 6mm copper strip
50
1966
98300
... More
50mm x 6mm G.I. Strip
200
185
37000
... More
32mm x6mm G.I. Strip
100
117
11700
... More
25mm x 6mm G.I. Strip
100
93
9300
... More
Providing & Laying XLPE insulated IS:7098/II/85 of approved make H.T.cable for working voltage 33 K.V.Un Earthed with Stranded Compacted Circular Aluminium Conductor, Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated, Insulation Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST-2 Outer Sheathed cable direct in ground including excavation of 30cmx150cm size trench, 25cm layer of river sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size.
-
-
-
... More
3 core 240.0 Sq.mm
500
2334
1167000
... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 33 KV cable, with required components, prepration of cable ends, testing etc. as required of following sizes.
-
-
-
... More
Indoor
-
-
-
... More
3 core 240/300 /400 Sq.mm
8
12322
98576
... More
Outdoor
-
-
-
... More
3 core 240/300 /400 Sq.mm
6
18669
112014
... More
Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection,Complete as per technical specifications and as directed by Engineer in charge.
-
-
-
... More
400 SQMM, 3.5 core
500
1623
811500
... More
240 SQMM, 3 CORE
400
929
371600
... More
4.0 Sq.mm x 3 Core
400
131
52400
... More
Supply, Fabricating & installing following sizes of ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and including painting as required.
-
-
-
... More
Hot Dipped Galvanized
-
-
-
... More
450mm x 50mm x 2.0mm
50
468
23400
... More
600mm x 50mm x 2.0mm
50
526
26300
... More
Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required.
-
-
-
... More
Hot Dipped Galvanized
-
-
-
... More
100mm x 50mm x 1.6mm
100
265
26500
... More
150mm x 50mm x 1.6mm
100
333
33300
... More
300mm x 50mm x 1.6mm
200
518
103600
... More
450mm x 50mm x 2.0mm
200
867
173400
... More
Providing & Fixing of Electrical insulating rubber matts as per PWD specification for electrical Works, ISI marked confirming to IS: 15652 /2006 with one side anti skid abberation marks and pasting the mat with synthetic rubber adhesive as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR as per latest IS 1562 :2006., 33 KV, 3 mm thick with proof voltage 36 KV / 3 min. and Break Down
Voltage 65 KV
15
2302
34530
... More
415 V LT Panel SITC of floor mounted PMCC (Indoor, Dust proff IP-4X front operated with 2 mm thick sheet metal compartmentalised) with all accessible parts, head shrinkable sleeves, SMC/DMC bus bar supports, padlocking facility on outgoing feeders etc.
-
-
-
... More
Incommer feeder for (drowout type ) transformer 1600 A, 50KA, ACB 3 pole, Al Bus Bars,Digital Multifunction meter compatable to SCADA,metering,Protection CT's, IDMT 3-O/C & 1-E/F, indicating lamps, control fuse, wiring etc.complete in all respect of the size appxo 900(D)X.2400(H)X1000(D)
2
307830
615660
... More
Bus Coupler Feeder (drowout type ), 1600 A ACB, 50KA, 3 Pole without release with Al Bus Bars, Indicating Lamps, Control Fuses and wiring etc. complete in all respect. Size : 900(W) x 2400 (H) x 1000 (D)
1
268085
268085
... More
800 A ACB (drowout type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 900(W)X2400(H)X1000(D)
1
233738
233738
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
5
33511
167555
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
2
33511
67022
... More
S & F of Star delta Starter with MCB,Main and Aux Contactor,O/L Relay, L/R Selector Switch,3 Indicating lamps,Start-Stop Push Button ,Control MCB with panel with all accessories with following rating
-
-
-
... More
15 KW
2
11417
22834
... More
SITC of Variable Frequency Drives with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus.
-
-
-
... More
160KW
5
357965
1789825
... More
433V APFC Panel( 350KVAR) in cubicle made of CRCA sheet steel of minimum 2.5/2.0/1.6 mm thickness, comply with latest IS/ IEC, totally enclosed Operational on 3 Phase 415 voltages, 50Hz, neutrally grounded, IP 4X, The cubicle panel shall be vermin proof and dust-tight and shall be of compartmentalized type construction, nine tank pre-treatment process before powder coating, Paint Shade – Grey RAL 7032, gasket material- neoprene, AC/DC/CT wiring – 1.5/2.5sqmm PVC insulated multi strand Copper flexible wire, Heat shrinkable Colour coded PVC bus bar sleeves, cable entry Incoming – bottom and outgoing – Bottom as per requirement. The switchgears and control gears complete with all necessary supporting framework, nuts and bolts, Aluminum Bus Bar. The Indoor APFC Panel switchesgear (Air circuit breakers, MCCB, CTs, etc) and control gear (Microprocessor based APFC 8/12 Stage relays, APFC Duty Contactors, auxiliary contacts, Space heater and lighting, Digital A & V meters with Selector Switch, Phase Indications, Hooter, plug socket etc.) shall be mounted on the same panel Complete as per technical specifications and as directed by Engineer in charge.
350
2596
908600
... More
SITC of Local Push Button station fabricated with 16 SWG CRCA sheet, painted with polyster Powder coated finish after chemical treatment with Folliwng items and accessories:- i Shrouded Type push button with 2 NO Contacts element for Start/forward-reverse. ii Lockable Mushroom head type push buuton with 2 NC Contact element. iii 2.5 Sqmm clipon type terminals as requried with 20% spares. iv 1.5 Sqmm PVC insulated felxible copper wire with lugs & ferrules as requried.
-
-
-
... More
Local Push Button Station
5
2026
10130
... More
Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning.
-
-
-
... More
7 Mtr.
12
15962
191544
... More
Supply, Erection and Fixing of hot dipped galvanised Overhang (60 X 3.25 mm) with cap (250 x 137.9 x 4.05 mm) over the poles
-
-
-
... More
Single arm overhang
12
1382
16584
... More
P/ F IP-65/ IP-66 protected street light luminaries on bracket / Arm. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. IP-65 protected LED street light luminaries
-
-
-
... More
LED street light fixture 80-90 watt
12
8313
99756
... More
P & F IP -65 protected integral flood light luminaire suitable for HPSV/ Metal halide lamp comprising of powder coated die cast aluminium housing, electrochemically brightened and anodized stippled aluminium reflector, covered with suitably gasketed heat resistant and toughened glass, porcelain holder, integral control gear box having copper ballast, capacitor, electronic ignitor prewired with pvc insulated copper conductor up to terminal block including making connection testing etc.
-
-
-
... More
1 X 250 Watt
4
5313
21252
... More
P & F High pressure sodium vapour/ High pressure mercury vapour/ Metal halide/ Halogen lamp as required. HPSV tubular lamp normal output.
-
-
-
... More
250 Watt
4
261
1044
... More
Supply, erection testing and commissioning of high mast lighting system (as per CP3-TRT/1996 of ILE, UK) consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries, mast head assembly, two nos aviation obstruction neon lights, double drum type self sustaining winch, integral power tool( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, suitable ropes and CC foundation of M-15 grade complete as required. The mast is constructed from mild steel plates (as per BS-EN 10025) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. with all accessories, which also includs internal electrical cable and panel with foundation.
-
-
-
... More
20 Mtr Hm (in 2 section)
1
469585
469585
... More
P & F IP-65 protected multi tap ballast street light luminaire on bracket suitable for HPSV LAMP, made out from powder coated single piece die cast aluminium housing, electrochemically brightened and anodized POT optics aluminium reflector, heat resistant and toughened glass cover and accessories like multi tap copper ballast, electronic ignitor, capacitor, holder prewired up to terminal block etc. as required including making connection testing etc.
-
-
-
... More
1 X 250/ 150 Watt
12
2765
33180
... More
Providing and fixing in position lightening arrester set complete with 600mm x 600mm x 6mm thick G.I. earthing plate embedded below ground in earthling pit at 3.5 metre depth, G.I. strip of size 25mmx5mm thick from earthing plate to top of Over head tank, G.I. Finial made of GI bar 25mm dia and 2m long fixed on top of Building and connected to GI strip. The earthling set shall comply of IS:3043 complete in all respect as per specification and the direction of the Engineer.
2
12500
25000
... More
Part-02: Construction of Water Treatment Plant (Rapid Gravity Filters with declining rate with auto controls ) of 38 MLD Capacity At 22 hours Operation per day
-
-
-
... More
Construction of Water Treatment Plant (Rapid Gravity Filters with declining rate with auto controls) of 38 MLD capacity with all civil, mechanical and electrical items chemical house, pre and post chlorination arrangements, including primary clarifiers and recycling arrangements of wash water, construction of administrative buildings, laboratory with lab equipments, instrumentation, including SITC of SCADA system in all respect as per technical specification. Work for construction of 4000KL Clear Water reservoir at WTP head work is also included in the cost of WTP. Work of CWR shall also included all piping work, installation of specials/ valves as per scope/ specification & design. No separate payment for construction of CWR at WTP head work shall be payable
38
2900000
110200000
... More
Construction of boundary wall of Brick/ stone masonary as per enclosed GA drawing, scope of work and technical specifications complete work in all respect. Brief details of boundary wall parameter is as below:
1. Depth of foundation- 900 mm.
2. PCC in M-10, width -900 mm and thickness 100 mm,
3. Stone masonary in CM: 1:6 section of foundation above PCC, 600 mm (W )x 450 mm (D) and 450 mm (W) x 450 mm (D)
4. Superstructure work: Stone masonary in CM: 1:6, W-300, height-1650 mm,/ Brick work in CM: 1:6 W-230 mm, height- 1650 mm.
5. Cement mortar pointing on Stone masonary and cement mortar plaster 20 mm thick on brick masonary in CM 1:6.
6. Expansion joint shall be on every 30 mtr.
7. On top of wall there shall be CC Coping 75 mm thick (1:2:4) shall be provided.
8. Pillar for main gate 350x350 mm in size is part of boundary wall.
9. Cement paint of approved colour in 3 coat shall be done.
1500
5017
7525500
... More
Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flats or black pipe with hold fast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide and two coat of enamal paints.( Four nos of Gate )
1000
104
104000
... More
A-DRAINAGE
-
-
-
... More
Providing and fixing of reinforced Ferro-Cement drain covers designed for 'A' & 'AA' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted M.S. plate , Rim and M.S. lifting hooks, Admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.
-
-
-
... More
For Class - 'A' loading
-
-
-
... More
Span 300 to 450 mm Standard size 600x800mm
675
581
392175
... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter. All kinds of soil.
810
152
123120
... More
Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks
-
-
-
... More
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
1620
3095
5013900
... More
Providing and Laying Reinforced cement concrete pipe NP4/ prestrssed concrete pipe for culverts including jointing ends and fixing collar with cement mortar 1:2 complete as per clause 1000 & 2900 of MoRT&H specification including all material, labour form work, machinery.
-
-
-
... More
200 mm internal diameter
200
511
102200
... More
B- Horticulture
-
-
-
... More
Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 mtrs and earth filling in the depression/pit to required compaction as per MoRT&H specification clause 201. (Measurment of girth to be done at height of 1 m above ground level)
-
-
-
... More
Girth from 300 mm to 600 mm
1500
284
426000
... More
Clearing Grass and Removal of Rubbish (Maximum 150mm) by manual means and disposal at a lead of 50 metres as per MoRT&H specification clause 201.
21
22100
464100
... More
Supply of dry manure including loading unloading, transportation & stacking at site.
-
-
-
... More
Farm yard manure (organic)
50
400
20000
... More
Compost
50
500
25000
... More
Goat dungmanure
50
600
30000
... More
Supply & Stacking good earth at site complete including loading unloading & transporation etc.
2000
150
300000
... More
Supply of insecticides & pesticides at store in dust/liquid form complete
-
-
-
... More
Methly Prathion 2%
200
500
100000
... More
Supply of different varities of tree/ shrubs/climbers according to height and age of the plant at site including loading/unloading & transportation etc. complete:
-
-
-
... More
Different flowing plants 900 mm to 1500 mm (Rs 50 to Rs 150)
1500
100
150000
... More
Different varrities of shrubs 600 mm to 900 mm (Rs 25 to Rs 160)
1100
92
101750
... More
Different varrities of climbers 900 mm to 1500 mm (Rs 48 to Rs 144)
800
80
64000
... More
Laying of lawns including ploughing leveling breaking of clods manuring and removal of stones etc. (cost of manure or extra good earth to bepaid separately )maintenance of lawn foe 30 days or more till the grass forms a thick lawns free from weeds and fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost
-
-
-
... More
In rows 7.5 Cms. apart in either direction
45
4300
193500
... More
Renovating lawns including weeding cheeping the grass forking the ground top dressing with manure . Mixing tthe same with forked soilwatering maintaining the lawn for 30 days for till the grass grass forms a thick lawns free from weeds and fit for moving in the duration ofplanting if lawn die some where the contractor will replant it at his own cost
45
4000
180000
... More
Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee,bend etc.), satisfactory hydraulic testing, disinfection etc.complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M.
-
-
-
... More
HDPE PE-100 PN-6
-
-
-
... More
75 mm dia
1500
160
240000
... More
P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.
-
-
-
... More
15mm dia nominal bore "B Class"
200
116
23200
... More
C- Campus Road & Light
-
-
-
... More
Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
675
4033
2722275
... More
Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.
-
-
-
... More
M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm
nominal size).
562.5
5312
2988000
... More
S & F cement concrete pre cast Kerb or Dand up to 60 cm length over 20 mm thick base of cement mortar1:4 including jointing earth work, pointing & jointing with cement mortar 1:4 of size Including cost of M- 20 Mix Dand/ Kerb Complete
-
-
-
... More
20x20 cm
1000
257
257000
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete:
1000
72
72000
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required
-
-
-
... More
1.00 mm thick with zinc coating not less than 275 gm/m2
800
649
519200
... More
Supply and erection of hot dipped galvanised steel swaged tubular pole /GI Conical Pole conforming to IS: 2713-1980 (part I to II) with galvanised base plate of size 400mm x 400mm x 7mm in position including excavation of the pit and filling the same with C.C. of M- 10/M-20 grade (1:3:6)/ grade(1:1.5:3) from base plate to 50cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals , cable entry, GI cable sleeve complete as required. The pole shall be galvanised using ISI mark tube for structural purpose.
-
-
-
... More
7.5 Mtr. height
150
17781
2667150
... More
Add for supply and fixing of hot dipped galvanised Overhang of following size over the existing poles
-
-
-
... More
76.1mm OD x 3.25mm thickness
150
946
141900
... More
P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance.
-
-
-
... More
LED street light fixture 60 Watt
150
5715
857250
... More
Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
... More
10.0 Sq.mm, 4 core
150
169
25350
... More
D- Construction of RWH 4 nos for Roof Area 200 Sqm
-
-
-
... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter. All kinds of soil.Collecting Chamber ( 0.9X0.9X0.5)Silting Chamber (3.00X1.50X1.5)Pipe Trench
-
-
-
... More
2 nos at IPS and 2 nos WTP
25.86
152
3930.72
... More
Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve
-
-
-
... More
1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal sizeCollecting Chamber ( 0.9X0.9X0.5)Silting Chamber (3.00X1.50X1.5)
1.2
2507
3008.4
... More
Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks I 1:6 cement MartarCollecting Chamber Silting Chamber
3.94
3095
12194.3
... More
1:2:4 (1Cement :2 Course Sand 4 Graded stone aggregate 20 mm nominal sizefor Wall top & Floor
0.56
3460
1937.6
... More
Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level.
-
-
-
... More
Walls (any thickness) including attached pilasters, buttresses plinth and string course. Add extra for shuttering in circular work (in respective centering and shuttering items)Collection Tank (3.20 Dia 3.00 depth)Recharge Tank (3.00 Dia 3.00 Depth
146.95
235
34533.25
... More
Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc.Collection Tank (3.20 Dia 3.00 depth)Recharge Tank (3.00 Dia 3.00 Depth
22.75
275
6256.25
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (as required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.
M20 grade Nominal Mix / Design Mix Collection Tank (3.20 Dia 3.00 depth)Recharge Tank (3.00 Dia 3.00 Depth
14.82
4480
66393.6
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.
-
-
-
... More
Thermo Mechanically treated bars
1661.73
70
116321.1
... More
Dry sinking of well true & vertical in all types of soil including sand, silt, clay, mixed upto 25% with gravel and river bed stones upto size 300 mm in any direction complete as per drawing and technical specification (depth from level of placing of cutting edge & internal dia, to be taken for measurement) rate includes all percentage of pebbles, boulders and river bed stones. (depth to be measured from ground level)Collection Tank (3.20 Dia 3.00 depth) Recharge Tank (3.00 Dia 3.00 Depth
24.3
1291
31371.3
... More
Supply and installation of ISI marked India Mark II Hand pump set complete with cylinder & 15 connecting rods.
1
11552
11552
... More
Half brick masonry in foundation & plinth using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement
-
-
-
... More
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
4.5
427
1921.5
... More
Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish:
-
-
-
... More
25 mm thick.
38.78
222
8609.16
... More
Construction of tubewell up to 100m depth and above to accomodate housing and assembly pipe in all types of alluvium strata by rotay drilling method with "code of practice for construction and testing of tubewells (IS:2800 (Part-II) : 1991 and IS:2800 (Part-II) :1979 both amended up to date) with supply of bail plug if necessary.The work will include cost of casing pipe and strainer pipe assembly, gravel and development work etc. The work shall be completed as per technical specifications and direction of EIC.
-
-
-
... More
250 mm
50
1286
64300
... More
Supply & lowering air line of 25mm dia, G.I. pipe 'B' class having perforation 3 to 5mm size all arrow of G.I. pipe in Zig-Zag fashion & making air vent at top including the cost of Tee-Nipples, Elbow, Socket etc.
40
231
9240
... More
Supply and lowering vent air pipe 63mm dia rigid PVC pipe(IS 4985) mark class II (4kg per cm2 ) with required all necessary fittings including perforation of 3 to 5 mm size all around the pipe at a distance of 180 to 220mm in zig zag fashion and making air vent at top complete as per direction of Engineer incharge.
40
115
4600
... More
Supply & lying River-gravels of following sizes in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids
-
-
-
... More
Size 9 to 12 mm
16.33
1155
18861.15
... More
Size 3 to 5 mm
8.48
1260
10684.8
... More
Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse, without deduction of voids.
8.48
945
8013.6
... More
P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.
-
-
-
... More
110 mm
100
197
19700
... More
160 mm
50
324
16200
... More
P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:
-
-
-
... More
Cuppler
-
-
-
... More
110 mm
5
75
375
... More
160 mm
5
83
415
... More
Tee
-
-
-
... More
110 mm
2
131
262
... More
160 mm
2
143
286
... More
Bend
-
-
-
... More
110 mm
5
112
560
... More
160 mm
2
124
248
... More
Pipe Clip
-
-
-
... More
110 mm
20
145
2900
... More
Extra for supplying and fixing of 560 mm dia Ductile Iron manhole frame & cover, Hinged Type, Heavy Duty with test load of 400 KN, class D-400 as per BS EN 124, in place of RCC/ SFRC manhole frame & cover (ED/EHD) in manhole.
2
3290
6580
... More
Providing and fixing of reinforced Ferro-Cement drain covers designed for 'AA' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted M.S. plate , Rim and M.S. lifting hooks, Admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc. Standard Size 2100x500mm (150mm thick) for span 1201 to 1500mm
6.3
3450
21735
... More
Steel work
40
61
2440
... More
Part-03: A- Construction of Providing/ supplying, lowering, Laying and Jointing of MS/DI Transmission Main from Intake Well to Cluster CWRs
-
-
-
... More
Providing, lowering, laying in trenches aligning fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S& pipes as per IS:8329-2000 (amended up to date) with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in charge. (excluding earth work) Note: Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. MS/ DI K-7
-
-
-
... More
200mm
22539
2202
49630878
... More
250mm
55381
2851
157891231
... More
300mm
7156
3639
26040684
... More
350mm
48403
4431
214473693
... More
400mm
18631
5404
100681924
... More
600mm
21793
9968
217232624
... More
700mm
6922
13400
92754800
... More
Providing, lowering, laying in· trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-9 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining, suitable for potable water with rubber ring (EPDM) . joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) tisfactory hydraulic testing, disinfection etc.complete as per technical specificationsand direction of Engineer-in-charge. (excludingearth work).Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurementof the item and shall not be paid separately
-
-
-
... More
150mm
9659
2055
19849245
... More
250mm
27998
3458
96817084
... More
400mm
30486
6487
197762682
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:
All kinds of soil
-
-
-
... More
Ordrinary Soil @10%
21510.74
172
3699847.28
... More
Ordinary Rock @60%
129110.57
322
41573604.51
... More
Hard Rock(required blasting) 25%
53796.07
475
25553134.2
... More
Hard Rock(Blasting prohibited) 5%
10759.21
706
7596005.08
... More
Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirfing to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insersion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
150 mm
2
15922
31844
... More
200 mm
5
27452
137260
... More
250 mm
17
42425
721225
... More
300 mm
2
53861
107722
... More
350 mm
10
82076
820760
... More
400 mm
10
104198
1041980
... More
600 mm
5
239477
1197385
... More
700 mm
2
362639
725278
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended upto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 , Float Guide- HBT1.HP Orifice- HTB2/ SS, Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring- EPDM/NBR ,Ends flanged according to IS: 6418, Fastners - CS, All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660and two coats of paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of connecting tee, pipe piece and earth work.
-
-
-
... More
50 mm
82
11637
954234
... More
80 mm
65
14859
965835
... More
100 mm
15
20215
303225
... More
150 mm
5
34622
173110
... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirfing to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2- 1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineerin-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.. For offtake
-
-
-
... More
Manually Operated Resilient Seated Sluice Valves of Class PN 1.6
-
-
-
... More
200 mm
2
25341
50682
... More
250 mm
7
42053
294371
... More
300 mm
3
53559
160677
... More
350 mm
1
100494
100494
... More
700 mm
1
618247
618247
... More
Providing, lowering, laying, aligning, fixing in position CI D/F short body pattern type butterfly valves having body, disc and end cover in graded cast iron generally conforming to (IS13095/1991amended upto date), synthetic rubber faced ring secured on disc by retaining ring with SS steel screw stub shaft of SS riding in teflon bearing including C.C. foundation/ structural steel support, material, labour, testing along with pipe line and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work
-
-
-
... More
Class PN 1.6, Manually Operated with Gear
-
-
-
... More
250 mm
7
36032
252224
... More
300 mm
3
44934
134802
... More
350 mm
1
56040
56040
... More
700 mm
1
201931
201931
... More
Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirfing to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insersion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work..Scour Valves PN 1.6
-
-
-
... More
100 mm dia
50
10646
532300
... More
200 mm dia
40
27452
1098080
... More
300 mm dia
10
53861
538610
... More
350 mm dia
5
82076
410380
... More
SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU), Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
EFM 200 mm
1
130542
130542
... More
EFM 250 mm
7
155982
1091874
... More
EFM 300 mm
3
188460
565380
... More
EFM 350 mm
1
237746
237746
... More
EFM 700 mm
1
461307
461307
... More
Providing, lowering, aligning and fixing in position DI D/F Diaphragm type Pressure Reducing / Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body & Bonnet - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or ASTM A 536, Diaphragm and Resilient seal disc - Flexible, non- wicking nylon fabric reinforced synthetic elastomer -Buna-N / EPDM (FDA / WRAS approved), Body Seat Ring - Cast stainless steel ASTM- A 351 GR. CF8M / AISI- 316, raised, replaceable inline & onsite Stem - Stainless Steel, AISI-316, raised, replaceable inline & onsite Spring & Bearing bush- Stainless Steel, AISI-316 ,Disc guide, disc retainer & diaphragm washer - Stainless Steel, AISI-304/ 316/Bronze ,Seal- EPDM/ NBR ,Pilot Body- Stainless Steel, AISI-304/ CF8 or Brass Tubing - Stainless Steel, AISI-304 / Copper ,Solenoid Valve- Stainless Steel, AISI- 316 ,Throttling plug - Stainless Steel, AISI-304, Nut- Bolts - SS . Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. Insersion rubber of black EPDM 6mm thick Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge.Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
200 mm
1
180853
180853
... More
250 mm
2
246193
492386
... More
300 mm
2
324801
649602
... More
350 mm
1
451464
451464
... More
700 mm
1
1418420
1418420
... More
Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (suitable for sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. PN -1.6
-
-
-
... More
100 mm
4
3160
12640
... More
150 mm
2
4964
9928
... More
200 mm
9
7383
66447
... More
250 mm
38
10111
384218
... More
300 mm
11
12218
134398
... More
350 mm
14
15730
220220
... More
400 mm
10
21306
213060
... More
600 mm
4
41641
166564
... More
700 mm
4
47641
190564
... More
Constrcution of Sluice valve, Offtake Chambers, water meter chamber etc.:
-
-
-
... More
50 mm
82
32522
2666804
... More
80 mm
65
33826
2198690
... More
100 mm
64
34710
2221440
... More
150mm
7
36973
258811
... More
200 mm
47
39308
1847476
... More
250 mm
31
41718
1293258
... More
300 mm
18
44201
795618
... More
350 mm
17
46758
794886
... More
400 mm
10
49388
493880
... More
600 mm
5
60651
303255
... More
700 mm
4
66728
266912
... More
Constrcution of Air valve Pillar
166
16993
2820838
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix
1750
5420
9485000
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from ironores and roll the bilets to produce steel conforming to IS:1786)-Hot rolled deformed bars
86175
52
4481100
... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
3500
162
567000
... More
Supply laying and pushing of MS casing pipe of specified thickness approved by concerned department authority by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per Highway/ Railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water & sanitary lines and resistivity test for finding the soil strata using necessary equipments for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (up to 3 meter depth) with proper protection at these sites with shoring sheets and ISMB. Providing MS cutting edges for front shield and constructing thrust bed at designated level. Necessary dewatering and providing concrete foundation at the base of the driven pit, PVC/Rubber saddle as per the requirement of Highway/Railway authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per design, drawing and method as per approved by authority specification and the direction of the Engineer.
Apply corrosion, resistant, protection on inside and outside of casing pipe as per technical specification.
-
-
-
... More
National & State Highway Crossing
-
-
-
... More
150 mm, 17 No - Casing Pipe 400 mm
340
16737
5690580
... More
200 mm, 70 No - Casing Pipe 400 mm
1400
16737
23431800
... More
250 mm, 77 No - Casing Pipe 400 mm
1540
19914
30667560
... More
300 mm, 12 No- Casing Pipe 500 mm
240
20749
4979760
... More
350 mm, 90 No - Casing Pipe 600 mm
1800
26986
48574800
... More
400 mm, 88 No - Casing Pipe 600 mm
1760
26986
47495360
... More
500 mm, 35 No - Casing Pipe 700 mm
700
30032
21022400
... More
750 mm, 6 No - Casing Pipe 1100 mm
120
70200
8424000
... More
Canal Crossing by Trenchless Technology
-
-
-
... More
250 mm to 750 mm
11
480460
5285060
... More
River/ Nalla Crossing
-
-
-
... More
250 mm to 750 mm
270
234378
63282060
... More
Provision for Surge Protection
-
-
-
... More
Providing, lowering, laying, alingning, fixing in position in pipe line Air Cussion Valves as per IS:14845 of following dia (including jointing and jointing material), including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer etc,complete in all respect M.S. Fabricated Self Acting Air Cushion Valves suitable for pr. rating , PN-1.6
-
-
-
... More
50 mm
5
49973
249865
... More
80 mm
16
74246
1187936
... More
100 mm
20
92807
1856140
... More
200 mm
6
135641
813846
... More
Providing, lowering, laying, alingning, fixing in position in pipe line Zero Velocity Valves of as per IS:14845 of following dia (including jointing and jointing material), including all material,labour, testing and commissioning as per Technical Specifications and as per direction of Engineer etc,complete in all respect.
-
-
-
... More
M.S. Fabricated Plain End Self actuating consists of Spring Loaded Closing Disc for stopping reverse flow Zero Velocity Valve with By-Pass arrangement
-
-
-
... More
150 mm
2
57112
114224
... More
400 mm
1
171336
171336
... More
500 mm
1
285560
285560
... More
Part-04: Provision for Construction of CWRs
-
-
-
... More
Construction of Clear water reservoir, Including sump with two compartment and suitable electricaly actuated sluice gate, inter connecting pipe with electrically operated butter fly valve, sluice valve and dismantaling joints as per specification including providing and fixing, inlet , outlet, washout and over flow pipes,providing and installation of valves on Inlet, outlet Washout and over flow pipes, puddle collars , duck foot bends,pipes and their inter connection with incoming and out going mains including all specials, fittings, thrust block, RCC chambers dewatering arrangments, float valve,water level indicator, plinth protection works, food grade epoxy paints on inner surface of tank, anti -carbonation paint on outer surface, slogan writing, finising, testing and commissioning complete as per specifications
-
-
-
... More
IPS Khuri
650
5000
3250000
... More
CWPH AT WTP
-
-
-
... More
Construction of Pump house of required size suitable for installation of pump sets as per approved GA drawing, electrical works for lighting and fans, rain water drainage, foundation for pumps, support structure for suction/delivery pipe and valves, cable trenches, thrust blocks, pedestals, valve chambers, water supply, sainatry, septic tanks, Exhuast Fans and all finishing works to complete the building as per scope of work and specifications. The plinth area of pump house shall be area of measurement.
-
-
-
... More
At WTP work near proposed 4000 KL CWR (For Installation of 3W+2S Pumps & 2 pumps for future)
375
17485
6556875
... More
Providing and fixing at site with necessary packing, Horizontal Centrifugal Split Casting pumps with 4 pole induction motor operating at syncronised speed of speed 1500 RPM as per IS 12615: 2011 or amended up to date , CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts, Cement concrete foundation etc. complete with all respect as per the specification and scope of work and direction of Engineer in Charge of following range of duty conditions.
Note: Duty condition of required pump shall also be mentioned in BoQ.
-
-
-
... More
Sangod 133.96 LPS / 70 m head/150 KW
3
999746
2999238
... More
M .thana 105.32 LPS / 155 m head/262 KW
2
1599428
3198856
... More
Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.
-
-
-
... More
MS pipe specials above 600 mm dia (with minimum 6.3 mm thickness sheet). For Common Header, Suction, Delivery etc.
15500
122
1891000
... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirfing to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2 1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.. Electrically Operated & SCADA Compatible (PN 1.6 class)
-
-
-
... More
350 mm dia
5
220797
1103985
... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirfing to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2 1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.. Manually Operated Resilient Seated Sluice Valves of Class PN 1.6
-
-
-
... More
900 mm
1
1207226
1207226
... More
Providing, lowering, laying, aligning, fixing in position CI D/F short body pattern type butterfly valves having body, disc and end cover in graded cast iron generally conforming to (IS13095/1991amended upto date), synthetic rubber faced ring secured on disc by retaining ring with SS steel screw stub shaft of SS riding in teflon bearing including C.C. foundation/ structural steel support, material, labour, testing along with pipe line and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work
-
-
-
... More
350 mm dia
5
192389
961947.8
... More
Providing, lowering, aligning, fixing in position in pipe line, CI double flanged Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Cover of Grey cast iron of IS:210/ FG200 , Disc / plates - Cast steel ,Disc seal ring of EPDM/ NBR (food grade quality) ,Body seat of SS ,Face to face dimensions as per API: 594,Flanges Drilled as per IS:1538. Epoxy (Non-Toxic & suitable for drinking water) applied on body & cover inside and outside . Shaft/Stop Pin of SS- AISI- 304/410 , Hinge SS AISI 316/304 / CS ,Spring SS AISI 316/304 , Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal.Nut-Bolt confirming to IS:1363 and IS: 1367 (galvenised steel) ,Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.as per API: 594 and flanges as per ISS of approved make of following Class and dia complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
350 mm dia
5
53080
265400
... More
Providing, installation, testing and commissioning of following Stain less steel AISI 304 Expansion bellows of 10/16 bar rating with tie rods as per technical specifications and layout drawings including jointing material like nuts, bolts, rubber gaskets etc. complete in all respect as per technical specification and direction of Engineer In-Charge.
-
-
-
... More
350 mm dia
5
21227
106135
... More
400 mm
1
26314
26314
... More
500 mm
1
49986
49986
... More
Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete.
12600
63
793800
... More
Supplying, erecting, testing & commissioning of Electrically Operated Travelling Crane (EOT) .Main girder & End Carriage fabricated from Rollled Steel Section, Gear Box for all motion, Electro Magnetic Friction Disc Type Brakes, all safety limit switches , LT wheels EN 9, Double Flanged 4No, with Sq. Cage motor of adequate rating (KW), duly painted mechanical cleaning and one coat of primer and two coat of synthetic paint and as per the direction of the Engineer.
-
-
-
... More
5 MT Capacity (Span 9 M and Lift 6 M)
1
585100
585100
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(ammended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, Float- LP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside fastners - CS/ Galvenised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem Sluice Valves as per (IS: 14846 amended upto date) PN 1.6 ratings Valves including all mateial, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work.
-
-
-
... More
200 mm
2
47430
94860
... More
Providing, installation, testing and commissioning of glycerin filled Pressure gauge of following ranges with isolation valve and tap off pipe complete in all respect as per technical specification and as per direction of Engineer.
-
-
-
... More
(-)1.0 to +1.0 kg/cm²
5
1360
6800
... More
SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and pecifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU), Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
EFM 400 mm
1
237746
237746
... More
EFM 500 mm
1
360096
360096
... More
Water meter chamber:
-
-
-
... More
400 mm
1
49388
49388
... More
500 mm
1
54872
54872
... More
Electrical Work
-
-
-
... More
Supply, Installation, Testing and commissioning of copper wound Transformers 33/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories with off load tap changer (+5% to -10% in steps of 2.5%), winding / Top --- temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5% of the maximum total loss values for 11 KV as per energy efficiency level - 2 at basic Insulation level conferming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014. Transformers described as above and as per the following continuous rating
-
-
-
... More
1000KVA
2
2154178
4308356
... More
Supply, Installation, Testing and Commissiong of indoor type floor mounted metal clad, 33 KV Incomer VCB panel up to 630 A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 31.5KA/3 and IAC A-FLR for 31.5kA/1sec. Make of HT Panel, Vaccum Interrupter and VCB should be of same make. 33 KV / 110 Volts PT Class 0.5 accuracy and 100 VA burden with 1No. Voltmeter (0-36 KV), analog type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 36 KV on incomer, Ammeter, analog type, selector switches for ammeters, Microprocessor based numerical relay with O/L, E/F and S/C protection, Set of dual core dual ratio 3CTs of suitable ratio with secondary 1A,15 VA burden and accuracy Class – 0.5 for metering and class 5P10 for protection, Multifunction Meter.
2
935179
1870358
... More
Supply, Installation, Testing and Commissiong of indoor type floor mounted metal clad, 33 KV Bus Coupler VCB panel upto 630 A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 31.5KA/3 and Internal Arc test A-FLR for full short circuit current for 1 sec. duration. Make of HT Panel,Vaccum Intrrupter and VCB should be of same Make. Bus Coupler 1 No 630 Amp. VCB
2
1106628
2213256
... More
Supply, Installation, Testing and Commissiong of indoor type floor mounted metal clad, 33 KV outgoing VCB panel up to 630 A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 31.5KA/3 and IAC A-FLR for 31.5kA/1sec. Make of HT Panel, Vaccum Interrupter and VCB should be of same make. 3 KV / 110 Volts PT Class 0.5 accuracy and 100 VA burden with 1No. Voltmeter (0-36 KV), analog type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 36 KV , Ammeter, analog type, selector switches for ammeters, Microprocessor based numerical relay with O/L, E/F and S/C protection, Set of dual core dual ratio 3CTs of suitable ration with sec 1 of 15 VA burden and accuracy Class – 0.5 for metering and class 5P10 for protection, Multifunction Meter
2
865040
1730080
... More
SITC of battery bank of min 150 AH capacity comprising SMF/VRLA batteries , MS / Teakwood battery stand , interconnect wiring etc as required complete in all respect of rating:
-
-
-
... More
110VDC
2
218208
436416
... More
SITC of FCBC ( Float cum boost charger)suitable for 415V +/-10%,50 Hz , 1-ǿ / 3 -ǿ Input & 24/ 48 /110 V DC OutputNatural Cooled, free standing in Sheet Steel enclosure,SCR controlled , regulation +/-1% , Efficiency 75% on FLAC/ DC Instruments, Selector Switch ,Built in DC Distribution Board (6 No MCB), indication , control asrequired of following rating:
-
-
-
... More
25 A + 25 A
4
90993
363972
... More
Earthing Schedule Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 40 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
16
5500
88000
... More
Earthing Schedule Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 40 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
24
2800
67200
... More
GI Pipe, Class B, 40mm Dai with thickness of 3.610mm as per IS 1239 for the complete earthing system
160
250
40000
... More
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
-
-
-
... More
50mm x 6mm copper strip
100
1966
196600
... More
50mm x 6mm G.I. Strip
200
185
37000
... More
32mm x6mm G.I. Strip
200
117
23400
... More
25mm x 6mm G.I. Strip
200
93
18600
... More
Providing & Laying XLPE insulated IS:7098/II/85 of approved make H.T.cable for working voltage 33 K.V.Un Earthed with Stranded Compacted Circular Aluminium Conductor, Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated, Insulation Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST-2 Outer Sheathed cable direct in ground including excavation of 30cmx150cm size trench, 25cm layer of river sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size.
-
-
-
... More
3 core 240.0 Sq.mm
800
2334
1867200
... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 33 KV cable, with required components, prepration of cable ends, testing etc. as required of following sizes.
-
-
-
... More
Indoor
-
-
-
... More
3 core 240/300 /400 Sq.mm
16
12322
197152
... More
Outdoor
-
-
-
... More
3 core 240/300 /400 Sq.mm
12
18669
224028
... More
Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection,Complete as per technical specifications and as directed by Engineer in charge.
-
-
-
... More
400 SQMM, 3.5 core
500
1623
811500
... More
240 SQMM, 3 CORE
500
929
464500
... More
4.0 Sq.mm x 3 Core
1000
131
131000
... More
Supply, Fabricating & installing following sizes of ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and including painting as required.
-
-
-
... More
Hot Dipped Galvanized
-
-
-
... More
450mm x 50mm x 2.0mm
100
468
46800
... More
600mm x 50mm x 2.0mm
100
526
52600
... More
Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required.
-
-
-
... More
Hot Dipped Galvanized
-
-
-
... More
100mm x 50mm x 1.6mm
200
265
53000
... More
150mm x 50mm x 1.6mm
200
333
66600
... More
300mm x 50mm x 1.6mm
200
518
103600
... More
450mm x 50mm x 2.0mm
200
867
173400
... More
Providing & Fixing of Electrical insulating rubber matts as per PWD specification for electrical Works, ISI marked confirming to IS: 15652 /2006 with one side anti skid abberation marks and pasting the mat with synthetic rubber adhesive as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR as per latest IS 1562 :2006., 33 KV, 3 mm thick with proof voltage 36 KV / 3 min. and Break Down
Voltage 65 KV
30
2302
69060
... More
415 V LT Panel SITC of floor mounted PMCC (Indoor, Dust proff IP-4X front operated with 2 mm thick sheet metal compartmentalised) with all accessible parts, head shrinkable sleeves, SMC/DMC bus bar supports, padlocking facility on outgoing feeders etc.
-
-
-
... More
Incommer feeder for (drowout type ) transformer 1600 A, 50KA, ACB 3 pole, Al Bus Bars,Digital Multifunction meter compatable to SCADA,metering,Protection CT's, IDMT 3-O/C & 1-E/F, indicating lamps, control fuse, wiring etc.complete in all respect of the size appxo 900(D)X.2400(H)X1000(D)
4
307830
1231320
... More
Bus Coupler Feeder (drowout type ), 1600 A ACB, 50KA, 3 Pole without release with Al Bus Bars, Indicating Lamps, Control Fuses and wiring etc. complete in all respect. Size : 900(W) x 2400 (H) x 1000 (D)
2
268085
536170
... More
800 A ACB (drowout type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 900(W)X2400(H)X1000(D)
2
233738
467476
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
5
33511
167555
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
4
33511
134044
... More
From 3.3 KW to 7.5 KW DOL Starter Feeder with MCB,Main and Aux Contactor,O/L Relay,L/R Selector Switch,3 Indicating lamps,Start-Stop Push Button ,Control MCB (Size : 600 (W) x 400 (H) x 600 (D)
4
20262
81048
... More
SITC of Soft Starters with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus.
-
-
-
... More
225KW
5
347575
1737875
... More
433V APFC Panel( 350KVAR) in cubicle made of CRCA sheet steel of minimum 2.5/2.0/1.6 mm thickness, comply with latest IS/ IEC, totally enclosed Operational on 3 Phase 415 voltages, 50Hz, neutrally grounded, IP 4X, The cubicle panel shall be vermin proof and dust-tight and shall be of compartmentalized type construction, nine tank pre-treatment process before powder coating, Paint Shade – Grey RAL 7032, gasket material- neoprene, AC/DC/CT wiring – 1.5/2.5sqmm PVC insulated multi strand Copper flexible wire, Heat shrinkable Colour coded PVC bus bar sleeves, cable entry Incoming – bottom and outgoing – Bottom as per requirement. The switchgears and control gears complete with all necessary supporting framework, nuts and bolts, Aluminum Bus Bar. The Indoor APFC Panel switchesgear (Air circuit breakers, MCCB, CTs, etc) and control gear (Microprocessor based APFC 8/12 Stage relays, APFC Duty Contactors, auxiliary contacts, Space heater and lighting, Digital A & V meters with Selector Switch, Phase Indications, Hooter, plug socket etc.) shall be mounted on the same panel Complete as per technical specifications and as directed by Engineer in charge.
550
2596
1427800
... More
SITC of Local Push Button station fabricated with 16 SWG CRCA sheet, painted with polyster Powder coated finish after chemical treatment with Folliwng items and accessories:- i Shrouded Type push button with 2 NO Contacts element for Start/forward-reverse. ii Lockable Mushroom head type push buuton with 2 NC Contact element. iii 2.5 Sqmm clipon type terminals as requried with 20% spares. iv 1.5 Sqmm PVC insulated felxible copper wire with lugs & ferrules as requried.
-
-
-
... More
Local Push Button Station
5
2026
10130
... More
Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning.
-
-
-
... More
7 Mtr.
20
15962
319240
... More
Supply, Erection and Fixing of hot dipped galvanised Overhang (60 X 3.25 mm) with cap (250 x 137.9 x 4.05 mm) over the poles
-
-
-
... More
Single arm overhang
20
1382
27640
... More
P/ F IP-65/ IP-66 protected street light luminaries on bracket / Arm. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. IP-65 protected LED street light luminaries
-
-
-
... More
LED street light fixture 80-90 watt
20
8313
166260
... More
P & F IP -65 protected integral flood light luminaire suitable for HPSV/ Metal halide lamp comprising of powder coated die cast aluminium housing, electrochemically brightened and anodized stippled aluminium reflector, covered with suitably gasketed heat resistant and toughened glass, porcelain holder, integral control gear box having copper ballast, capacitor, electronic ignitor prewired with pvc insulated copper conductor up to terminal block including making connection testing etc.
-
-
-
... More
1 X 250 Watt
8
5313
42504
... More
P & F High pressure sodium vapour/ High pressure mercury vapour/ Metal halide/ Halogen lamp as required. HPSV tubular lamp normal output.
-
-
-
... More
250 Watt
8
261
2088
... More
Supply, erection testing and commissioning of high mast lighting system (as per CP3-TRT/1996 of ILE, UK) consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries, mast head assembly, two nos aviation obstruction neon lights, double drum type self sustaining winch, integral power tool( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, suitable ropes and CC foundation of M-15 grade complete as required. The mast is constructed from mild steel plates (as per BS-EN 10025) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. with all accessories, which also includs internal electrical cable and panel with foundation.
-
-
-
... More
20 Mtr Hm (in 2 section)
2
469585
939170
... More
P & F IP-65 protected multi tap ballast street light luminaire on bracket suitable for HPSV LAMP, made out from powder coated single piece die cast aluminium housing, electrochemically brightened and anodized POT optics aluminium reflector, heat resistant and toughened glass cover and accessories like multi tap copper ballast, electronic ignitor, capacitor, holder prewired up to terminal block etc. as required including making connection testing etc.
-
-
-
... More
1 X 250/ 150 Watt
24
2765
66360
... More
Providing and fixing in position lightening arrester set complete with 600mm x 600mm x 6mm thick G.I. earthing plate embedded below ground in earthling pit at 3.5 metre depth, G.I. strip of size 25mmx5mm thick from earthing plate to top of Over head tank, G.I. Finial made of GI bar 25mm dia and 2m long fixed on top of Building and connected to GI strip. The earthling set shall comply of IS:3043 complete in all respect as per specification and the direction of the Engineer.
4
12500
50000
... More
Supply, installation, testing and commissioning of MNRE approved Grid tied Solar Panels with inverter, meter, cable etc. suitable for Rooftop installation as well as Utility Scale Solar Power Projects with 25 years of Linear Generation warranty. Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation of PV module on MS frame as per approved design and drawings. Mounting structure shall be suitably designed to withstand wind velocity up to 150km/hr.
Grid Tie Transformer less inverters, Multiple independent MPPTs, Peak efficiency of 98%. Connect up to multiple strings PV arrays, Easy & fast connection, Built-in string-level monitoring, IP65 protection level, Wi-Fi / internet based remote monitoring with 5 years warranty.
All cabling up to panel and metre, earthing etc. required accessories and taxes are inclusive. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge.
Note: There shall be 5 year service warranty for panel, inverter, meter, cable etc. and suitable provision shall be included in tender document.
50000
57
2850000
... More
Providing and fixing with bracket/ supports etc wall/floor mounted fire extinguishers as per details below:
-
-
-
... More
ISI marked 10 kg capacity Dry Powder fire xtinguisher with high pressure discharge hose, squeeze gripe nozzle 120 gms carbon dioxide cartridge, gun metal cap with initial charge of dry power.
Both extinguisher and dry power to be ISI marked.
12
2980
35760
... More
Dewatring pumps at WTP
-
-
-
... More
Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Non clog submersible pumping set of 2% Ni CI Cascading, Impeller CF 8M ,Shaft SS 410,mechanical seal with 10M Power & Control cable , 5M Galvanized Chain,,10M, 50mm MS galvanized Guide pipe, Duck FootBend, with Guide wire SS 304 etc. complete with all respect as per specification
-
-
-
... More
Discharge 36 cum/hr and head 11 to 15 M
2
121900
243800
... More
Campus Development( Including Lighting works, Horticulture, Drainage, CC Roads and RWH etc.) at All Pump House
-
-
-
... More
A- Drainage
-
-
-
... More
Providing and fixing of reinforced Ferro-Cement drain covers designed for 'A' & 'AA' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted M.S. plate , Rim and M.S. lifting hooks, Admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.
-
-
-
... More
For Class - 'A' loading
-
-
-
... More
Span 300 to 450 mm Standard size 600x800mm
225
581
130725
... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter. All kinds of soil.
270
152
41040
... More
Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks
-
-
-
... More
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
540
3095
1671300
... More
Providing and Laying Reinforced cement concrete pipe NP4/ prestrssed concrete pipe for culverts including jointing ends and fixing collar with cement mortar 1:2 complete as per clause 1000 & 2900 of MoRT&H specification including all material, labour form work, machinery.
-
-
-
... More
200 mm internal diameter
200
551
110200
... More
Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 mtrs and earth filling in the depression/pit to required compaction as per MoRT&H specification clause 201. (Measurment of girth to be done at height of 1 m above ground level)
-
-
-
... More
Girth from 300 mm to 600 mm
500
284
142000
... More
Clearing Grass and Removal of Rubbish (Maximum 150mm) by manual means and disposal at a lead of 50 metres as per MoRT&H specification clause 201.
21
22100
464100
... More
Supply of dry manure including loading unloading, transportation & stacking at site.
-
-
-
... More
Farm yard manure (organic)
50
400
20000
... More
Compost
50
500
25000
... More
Goat dungmanure
50
600
30000
... More
Supply & Stacking good earth at site complete including loading unloading & transporation etc.
1000
150
150000
... More
Supply of insecticides & pesticides at store in dust/liquid form complete
-
-
-
... More
Methly Prathion 2%
200
500
100000
... More
Supply of different varities of tree/ shrubs/climbers according to height and age of the plant at site including loading/unloading & transportation etc. complete:
-
-
-
... More
Different flowing plants 900 mm to 1500 mm (Rs 50 to Rs 150)
2500
100
250000
... More
Different varrities of shrubs 600 mm to 900 mm (Rs 25 to Rs 160)
500
92
46250
... More
Different varrities of climbers 900 mm to 1500 mm (Rs 48 to Rs 144)
500
80
40000
... More
Laying of lawns including ploughing leveling breaking of clods manuring and removal of stones etc. (cost of manure or extra good earth to be
paid separately )maintenance of lawn foe 30 days or more till the grass forms a thick lawns free from weeds and fit for moving in the duration of
planting if lawn die some where the contractor will replant it at his own cost
-
-
-
... More
In rows 7.5 Cms. apart in either direction
45
4300
193500
... More
Renovating lawns including weeding cheeping the grass forking the ground top dressing with manure . Mixing tthe same with forked soilwatering maintaining the lawn for 30 days for till the grass grass forms a thick lawns free from weeds and fit for moving in the duration ofplanting if lawn die some where the contractor will replant it at his own cost
45
4000
180000
... More
Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee,bend etc.), satisfactory hydraulic testing, disinfection etc.complete as per technical specifications and direction of Engineer-in-charge of following class and diameter.
(excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M.
-
-
-
... More
HDPE PE-100 PN-6
-
-
-
... More
75 mm dia
500
160
80000
... More
P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.
-
-
-
... More
15mm dia nominal bore "B Class"
200
116
23200
... More
Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
337.5
4033
1361137.5
... More
Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.
-
-
-
... More
M20 grade Nominal Mix
1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm
nominal size).
281.25
5312
1494000
... More
S & F cement concrete pre cast Kerb or Dand up to 60 cm length over 20 mm thick base of cement mortar1:4 including jointing earth work, pointing & jointing with cement mortar 1:4 of size Including cost of M- 20 Mix Dand/ Kerb Complete
-
-
-
... More
20x20 cm
500
257
128500
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete:
-
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) ,fixing in position and applying a priming coat of approved steel primer all complete:
500
72
36000
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required
-
-
-
... More
1.00 mm thick with zinc coating not less than 275 gm/m2
400
649
259600
... More
Supply and erection of hot dipped galvanised steel swaged tubular pole /GI Conical Pole conforming to IS: 2713-1980 (part I to II) with galvanised base plate of size 400mm x 400mm x 7mm in position including excavation of the pit and filling the same with C.C. of M- 10/M-20 grade (1:3:6)/ grade(1:1.5:3) from base plate to 50cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals , cable entry, GI cable sleeve complete as required. The pole shall be galvanised using ISI mark tube for structural purpose.
-
-
-
... More
7.5 Mtr. height
60
17781
1066860
... More
Add for supply and fixing of hot dipped galvanised Overhang of following size over the existing poles
-
-
-
... More
76.1mm OD x 3.25mm thickness
60
946
56760
... More
P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance.
-
-
-
... More
LED street light fixture 60 Watt
60
5715
342900
... More
Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
... More
10.0 Sq.mm, 4 core
60
169
10140
... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter. All kinds of soil.
-
-
-
... More
2 nos at Bagri IPS and 2 nos WTP
25.86
152
3930.72
... More
Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve
-
-
-
... More
1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size
1.2
2507
3008.4
... More
Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks I 1:6 cement Martar
3.94
3095
12203.59
... More
1:2:4 (1Cement :2 Course Sand 4 Graded stone aggregate 20 mm nominal size
0.56
3460
1927.22
... More
Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level.
-
-
-
... More
Walls (any thickness) including attached pilasters, buttresses plinth and string course. Add extra for shuttering in circular work (in respective centering and shuttering items)
146.95
235
34533.25
... More
Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc.
22.75
275
6256.25
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (as required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.
M20 grade Nominal Mix / Design Mix
14.82
4480
66393.6
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.
-
-
-
... More
Thermo Mechanically treated bars
1561.63
70
109314.1
... More
Dry sinking of well true & vertical in all types of soil including sand, silt, clay, mixed upto 25% with gravel and river bed stones upto size 300 mm in any direction complete as per drawing and technical specification (depth from level of placing of cutting edge & internal dia, to be taken for measurement) rate includes all percentage of pebbles, boulders and river bed stones. (depth to be measured from ground level)
24.3
1291
31371.3
... More
Supply and installation of ISI marked India Mark II Hand pump set complete with cylinder & 15 connecting rods.
1
11552
11552
... More
Half brick masonry in foundation & plinth using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement
-
-
-
... More
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
4.5
427
1921.5
... More
Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish:
-
-
-
... More
25 mm thick.
38.78
222
8609.16
... More
Construction of tubewell up to 100m depth and above to accomodate housing and assembly pipe in all types of alluvium strata by rotay drilling method with "code of practice for construction and testing of tubewells (IS:2800 (Part-II) : 1991 and IS:2800 (Part-II) :1979 both amended up to date) with supply of bail plug if necessary.The work will include cost of casing pipe and strainer pipe assembly, gravel and development work etc. The work shall be completed as per technical specifications and direction of EIC.
-
-
-
... More
250 mm
50
1286
64300
... More
Supply & lowering air line of 25mm dia, G.I. pipe 'B' class having perforation 3 to 5mm size all arrow of G.I. pipe in Zig-Zag fashion & making air vent at top including the cost of Tee-Nipples, Elbow, Socket etc.
40
231
9240
... More
Supply and lowering vent air pipe 63mm dia rigid PVC pipe(IS 4985) mark class II (4kg per cm2 ) with required all necessary fittings including perforation of 3 to 5 mm size all around the pipe at a distance of 180 to 220mm in zig zag fashion and making air vent at top complete as per direction of Engineer incharge.
40
115
4600
... More
Supply & lying River-gravels of following sizes in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids
-
-
-
... More
Size 9 to 12 mm
16.33
1155
18861.15
... More
Size 3 to 5 mm
8.48
1260
10684.8
... More
Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse, without deduction of voids.
8.48
945
8013.6
... More
P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.
-
-
-
... More
110 mm
100
197
19700
... More
160 mm
50
324
16200
... More
P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:
-
-
-
... More
Cuppler
-
-
-
... More
110 mm
5
75
375
... More
160 mm
5
83
415
... More
Tee
-
-
-
... More
110mm
2
131
262
... More
160mm
2
143
286
... More
Bend
-
-
-
... More
110mm
4
112
448
... More
160mm
2
124
248
... More
Pipe Clip
-
-
-
... More
110mm
20
145
2900
... More
Extra for supplying and fixing of 560 mm dia Ductile Iron manhole frame & cover, Hinged Type, Heavy Duty with test load of 400 KN, class D-400 as per BS EN 124, in place of RCC/ SFRC manhole frame & cover (ED/EHD) in manhole.
2
3290
6580
... More
Providing and fixing of reinforced Ferro-Cement drain covers designed for 'AA' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted M.S. plate , Rim and M.S. lifting hooks, Admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc. Standard Size 2100x500mm (150mm thick) for span 1201 to 1500mm
6
3450
20700
... More
Steel work
40
61
2440
... More
Part-06: Construction of Civil Building
-
-
-
... More
Office Buildings ( EE +AE Office) -1 Nos @ 250 sqm each
250
19994
4998672.5
... More
Officers Residences (AE) - 1 Nos @ 85 sqm each
85
19994
1699548.65
... More
Inspection Banglow
150
19994
2999203.5
... More
Fitter- 1 No @ 120sqm each WTP
120
19994
2399362.8
... More
Electrician - 1 No @ 120 sqm WTP
120
19994
2399362.8
... More
Pump Drivers - 1 Nos @ 120 sqm each WTP
120
19994
2399362.8
... More
Fitter- 1 No @ 60sqm each IPS
60
19994
1199681.4
... More
Electrician - 1 No @ 60 sqm IPS
60
19994
1199681.4
... More
Pump Drivers - 1 Nos @ 60 sqm each IPS
60
19994
1199681.4
... More
MCC Scada - 1 Nos @ 60 sqm
60
19994
1199681.4
... More
Store Shed - 2 Nos @ 100 sqm each
200
19994
3998938
... More
DG Shed - 2 nos @ 50 sqm each
100
1905
190522
... More
Administrative Buildings
390
19994
7797929.1
... More
Part-07A: PLC Scada At RWPH
-
-
-
... More
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1100 mm X 700 mm X 2100mm (LBH) , fabricated out of min. 2 mm thick CRCA sheet complete with latest configuration PC, necessary programming for SCADA software and comprising of all accessories not limited to the following: DI –92 num DO – 92 num AI –16 num AO – 8 num MCB 10A DP – 1 num MCB4ADP – 2 num MCBSP2A – 8 num MCB 1A DP – 15 num 24 VDC Power Supply 10A – 1 num Push Buttons – 30 num Selector Switch - 15 num Control Relays – 200 num Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm, 110VAC, with Electronic Hooter – 1 num Control Transformer – 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num Panel Light with Door Switch – 1 num Control Indication Lamp – 30 num Wiring + TB etc – 1 lot Hardware – 1 lot
1
1552591
1552591
... More
HIM Display, Colour, 12" having Ethernet Port, USB Port ect.
1
181720
181720
... More
Quad-band GSM/GPRS modem with Ethernet bridge/ router/ serial server (RS232/485) interface.
2
117918
235836
... More
Providing, installation, testing and commissioning of UPS, 3Phase 415 V, 50 Hz with 60 min back up Ni+Cd battery bank.
-
-
-
... More
2KVA
1
298726
298726
... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (inner sheeted GI Steel wire Mylar/Drain wire) along with ATC drain wire , round/steel Armoured overall PVC sheathed (ST-1) overall screened Core Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.
-
-
-
... More
1 SQMM, 24 Core
200
334
66800
... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (Mylar tape wrapped) along with ATC Drain wire overall PVC sheathed (ST-1) overall screened Pair Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.
-
-
-
... More
1 SQMM, 1 Pair
600
98
58800
... More
Providing and laying XLPE/PVC insulated & PVC sheathed Armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction.
-
-
-
... More
4C x 2.5 sq.mm
300
202
60600
... More
4C x 1.5 sq.mm
300
152
45600
... More
Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA with HART / Diaphragm: SS316L / Process Connection: 1/2 "NPT (M) / Accuracy: 0.15% Protection: IP67
-
-
-
... More
1/2" M (NPT)
5
70751
353755
... More
Part-07B: PLC Scada at WTP & CWPH
-
-
-
... More
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1100 mm X 800 mm X 2100mm (LBH) , fabricated out of min. 2 mm thick CRCA sheet complete with Operator Station (PC) including, necessary programming software for PLC & SCADA and comprising of all required accessories not limited to the following: Programmable Logic Controller (PLC) with Dual redundant CPU, Power supply module for IO & Processor rack (Standard DC), Back up Interface/Expansion Module(BCM/BEM), Rack (Backplane) 10 slots for IO and Processor – 1 lot DI – 288 num DO – 176 num AI – 32 num AO – 16 num Ethernet Switch – 3 num MCB 10A DP – 1 num , MCB4ADP – 2 num MCBSP2A – 10 num , MCB 1A DP – 15 num 24 VDC Power Supply 10A – 1 num , Push Buttons – 30 num Selector Switch – 15 num , Control Relays – 150 num Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm, 110VAC, with Electronic Hooter , Control Transformer – 1 num Emergency PB – 1 num , Panel Cooling Fan – 1 num Panel Light with Door Switch – 1 num , Control Indication Lamp – 30 num Wiring + TB etc – 1 lot Hardware – 1 lot HMI – 2 num Operator Station including, Core i5 processor, 8 GB DDR-3 RAM, 500 GB HDD, DVD RW Drive, RS-232/485 Ports, 1 Parallel Port, 4 nos. USB Port, 2x Ethernet Cards, Keyboard, optical mouse, 32'' monitor, Latest windows professional ver., etc. – 02 num Programming and troubleshooting software for HMI – OWS – 1 lot Colour Printer A4, Lasejet – 1 num
2
5031180
10062360
... More
Providing, installation, testing and commissioning of UPS, 3Phase 415 V, 50 Hz with 60 min back up Ni+Cd battery bank.
-
-
-
... More
3KVA
2
345894
691788
... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (inner sheeted GI Steel wire Mylar/Drain wire) along with ATC drain wire , round/steel Armoured overall PVC sheathed (ST-1) overall screened Core Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.
-
-
-
... More
1 SQMM, 24 Core
400
334
133600
... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (Mylar tape wrapped) along with ATC Drain wire overall PVC sheathed (ST-1) overall screened Pair Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.
-
-
-
... More
1 SQMM, 1 Pair
600
98
58800
... More
Providing and laying XLPE/PVC insulated & PVC sheathed Armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction.
-
-
-
... More
4C x 2.5 sq.mm
200
202
40400
... More
4C x 1.5 sq.mm
200
152
30400
... More
Providing, Installation, Testing and Commissioning of ULTRASONIC LEVEL TRANSMITTER for Water Application : Principle : Time of Flight / Sensor MOC PP / Process Connection 1 1/2 inch BSP or 2 inch BSP Threaded type / Power Supply: 24 V DC / Output: 4- 20mA / Display: Integral display for programming and Display Reading / IP 66
-
-
-
... More
0-5M
2
62890
125780
... More
Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA with HART / Diaphragm: SS316L / Process Connection: 1/2 "NPT (M) / Accuracy: 0.15% Protection: IP67
-
-
-
... More
1/2" M (NPT)
5
70751
353755
... More
Engg. Station including, Core i7 processor, 8 GB DDR-3 RAM, 2TB HDD, DVD RW Drive, RS-232/485 Ports, 1 Parallel Port, 4 nos. USB Port, 2x Ethernet Cards, Keyboard, optical mouse, 32'' monitor, Latest windows professional ver. Make - HP/DELL/ LENOVA
4
194700
778800
... More
SITC of 55'' Flat Screen HD LED TV with remote control and wall mount unit / floor standcomplete with making connections etc. as required Sony/ Samsung/Panasonic)
4
200000
800000
... More
Optic Fibre Cable, Armoud, Single Mode , 6 Core, Industrial Application,
698
71
49558
... More
TP-Link Gigabit SFP to RJ45 Fiber Media Converter, Fiber to Ethernet Converter - 10/100/1000Mbps RJ45 Port to 1000Base-LX Single-Mode Fiber. One RJ - 45 and two Fiber port (SC type connector), Auto MDI support, AC 240V or DC +5V, Store and Forward Mode, 10Km 1000 Base-T to 1000 Base-LX.
12
17700
212400
... More
Part-07C: PLC Scada at IPS
-
-
-
... More
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1100 mm X 700 mm X 2100mm (LBH) , fabricated out of min. 2 mm thick CRCA sheet complete with latest configuration PC, necessary programming for SCADA software and comprising of all accessories not limited to the following: DI – 60 num DO – 60 num AI – 8 num AO – 4 num MCB 10A DP – 1 num MCB4ADP – 2 num MCBSP2A – 8 num MCB 1A DP – 15 num 24 VDC Power Supply 10A – 1 num Push Buttons – 20 num Selector Switch – 10 num Control Relays – 200 num Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm, 110VAC, with Electronic Hooter – 1 num Control Transformer - 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num Panel Light with Door Switch – 1 num Control Indication Lamp – 20 num Wiring + TB etc – 1 lot Hardware – 1 lot
1
1252882
1252882
... More
HIM Display, Colour, 12" having Ethernet Port, USB Port ect.
1
181720
181720
... More
Quad-band GSM/GPRS modem with Ethernet bridge/ router/ serial server (RS232/485) interface.
2
117918
235836
... More
Providing, installation, testing and commissioning of UPS, 3Phase 415 V, 50 Hz with 60 min back up Ni+Cd battery bank.
-
-
-
... More
2KVA
1
298726
298726
... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (inner sheeted GI Steel wire Mylar/Drain wire) along with ATC drain wire , round/steel Armoured overall PVC sheathed (ST-1) overall screened Core Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.
-
-
-
... More
1 SQMM, 24 Core
100
334
33400
... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (Mylar tape wrapped) along with ATC Drain wire overall PVC sheathed (ST-1) overall screened Pair Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.
-
-
-
... More
1 SQMM, 1 Pair
200
98
19600
... More
Providing and laying XLPE/PVC insulated & PVC sheathed Armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction.
-
-
-
... More
4C x 2.5 sq.mm
100
202
20200
... More
4C x 1.5 sq.mm
100
152
15200
... More
Providing, Installation, Testing and Commissioning of ULTRASONIC LEVEL TRANSMITTER for Water Application : Principle : Time of Flight / Sensor MOC PP / Process Connection 1 1/2 inch BSP or 2 inch BSP Threaded type / Power Supply: 24 V DC / Output: 4- 20mA / Display: Integral display for programming and Display Reading / IP 66
-
-
-
... More
0-5M
1
62890
62890
... More
Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA with HART / Diaphragm: SS316L / Process Connection: 1/2 "NPT (M) / Accuracy: 0.15% Protection: IP67
-
-
-
... More
1/2" M (NPT)
2
70751
141502
... More
Cost for Basic Service Charges, Administration and Management, Running of Office, Staff Quarters, Comprehensive Operation, Maintenance and Repairs including Preventive Maintenance, Cost of material required for maintenance & repairs, Cost of Lubricants, chlorine gas, PAC, all other chemicals, Consumables, Spare Parts & (if the spare parts supplied to PHED are used in emergency) including O&M of Intake Pump House under Deposit work as per Scope of Work & terms & conditions of contract. No amt will be paid for O&M in DLP.
-
-
-
... More
For the 1st year of O&M after DLP
1
8068523
8068523
... More
For the 2nd year of O&M after DLP
1
8471949
8471949
... More
For the 3rd year of O&M after DLP
1
8895546
8895546
... More
For the 4th year of O&M after DLP
1
9340324
9340324
... More
For the 5th year of O&M after DLP
1
9807340
9807340
... More
For the 6th year of O&M after DLP
1
10297707
10297707
... More
For the 7th year of O&M after DLP
1
10812592
10812592
... More
For the 8th year of O&M after DLP
1
11353222
11353222
... More
For the 9th year of O&M after DLP
1
11920883
11920883
... More
For the 10th year of O&M after DLP
1
12516929
12516929
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%