Military Engineer Services Tender

Complete removing old layers of paints by paint removers and scrapping with suitable scrapers tools and clean the surafce by sweeping and applying two coat of Apcotrak of Asian paints PPG/ Berger guildline RM 164 Paint/ Road marking paint of equivavlent Specification (as approved by GE) , water based matt finished over one coat of primer as per IS-164 of white, golden yellow, Deep orange, Red and black in lines, dashes, letter, circle, triangle etc on concrete or bitumen surfaces/ pavements exceeding 10cm in width using Mechanical pavement marking machine .complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of old black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with using air blowers to remove all loose dirt, rubber deposits complete and appplying Polymer Modified emulsion (PME) by using spraying machine having penetration value 10-20 mm and initial setting time of 4-5 hours, but not more than 8 hours. First coatwith 0.6 ltr ( undiluted) PME diluted in 0.6 Ltr water, to be applied uniformally on each 1 sqm area mixed with mechanical filler as recommended by manufacturer of PME and ensure uniform finish of PME on fexible surface with mechanical application through spraying machine and using specially designed mopper for mopping the surface, complete all as per manufacturers instructions and complete all as directed. Name of Manufacturers:- (i) M/s L N Petro Chem Private Limited. (ii) M/s Hindustan Colas Private Limited. (iii) M/s Ooms Polymer Modified Bitumen Pvt Ltd or any other make approved by E-in-C’s Branch. The Tenderer shall take into consideration the following points while quoting the rates of this item :- Notes :- (a) The work shall be carried out through registered applicators of the manufacturer only. (b)Two year warranty of material performance and application performance shall be obtained from the authorised manufacture of PME. Warranty will include the fact that structure wll reamin water tight and no further cracks will be formed excluding damage caused by natural calamities.

Complete removing old layers of paints by paint removers and scrapping with suitable scrapers tools and clean the surafce by sweeping and applying two coat of Apcotrak of Asian paints PPG/ Berger guildline RM 164 Paint/ Road marking paint of equivavlent Specification (as approved by GE) , water based matt finished over one coat of primer as per IS-164 of white, golden yellow, Deep orange, Red and black in lines, dashes, letter, circle, triangle etc on concrete or bitumen surfaces/ pavements not exceeding 10cm in width using Mechanical pavement marking machine complete all as specified and directed by Engineer-in-Charge.