Military Engineer Services Tender

M & L for attending and rectifying day to day complaints of fans by taking down celiing fan/exhaust fan/Wall fan of any type/make/sweep from its location at OTM, married accn and offices under GE Nasirabad, servicing of fans after removing blades, opening of ceiling fan at site and cleaning ball bearing,gun metal bush, filling grease /oil and changing of screwes, check nuts etc if required and re-assembling of fan, blades, down rod, canopy etc and hanging back fan to its original location after cleaning of body, and connecting up including providing sufficient length of twin core PVC flexible copper conductor wire of size 23/0.0076 from ceiling rose or connector to fan complete all as specified and directed by Engr-in-Charge with following Note below 1.01.

NOTE(All as per item No 1.00 above):- (a) The cost of collecting new/old ceiling/exhaust/wall fan any size and any make from AGE E/M store, assembling and fixing at site as directed including servicing, if required, is also deemed to be included in the above rate. (b) All T & P and labour team as required will be provided by the contractor as directed by Engr-in-charge. Cost of petty stores such as grease, lubricating oil, lock nut, cross pin,check nuts, insulation tape etc are deemed to be included in item No 1 (c) Rep of the contractor shall be present at complaint cell & responsible for attending the complaints from 8:30 am to 05:00 pm . (d) Cost of minor stores such as screws, insulation tapes ,nuts, bolts, split pins of required size etc shall be deemed to be included in the above quoted rate. However, major items such as bearings, bushes, holding clamps, canopies, fan blades etc shall be measured and paid separately under appropriate items of Schedule 'A'.

M & L for rewinding of stator complete with super enamelled copper wire (gauge/ weight of copper coil shall be same as per dismantled fans), including taping, quick varnishing, drying up, fixing connection leads and testing of the following size/ sweep of Fans complete all as specified and directed by Engr-in-Charge:- (Note : Rates are deemed to be inclusive for collection of fan from AGE E/M yard under contractor's own arrangement, removing defective parts, burnt winding carefully, cleaning & re-assembling the fan after repair i.e. oiling, greasing, washer, lock bolts, connector, cross pin etc, depositing back to AGE E/M yard and testing complete to the satisfaction of Engineer-in-charge (spare parts will be measured and paid seperately under relevant items).