Military Engineer Services Tender

(Description of serial item No. 3.00 here-in-above Contd...........) Note:- Following are included in the unit rate of this items. Nothing extra shall be paid on this account :- (i) Pump, monoblock, horizontal, spilt type not less than 38 LPM discharge at 30 mtr head 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor complete with fittings, cutting, welding work as required at site to connect with the existing suction/ discharge pipe line. (ii) Squirrel cage indication motor, TEFC, single Phase 230 Volts 50 C/S AC supply 1440 RPM, not less than 02 HP directly coupled to monoblock pump set. (iii) Common base foundation of ISMC-100 suitable for installation of above pump set duly drilled holes and painted with two coats synthetic enameled paint over a coat of red oxide primer. (iv) Pipe fittings etc reqd for connecting with the existing suction discharge pipe line including cutting / welding as required at site and as directed.

Supplying, installing, testing and commissioning of monoblock pump set, electric motor driven capacity not less than 115 LPM at 45 metre head in load CI casing single stage with impeller, stainless steel shaft and directly coupled to motor, 'B' class insulation, squirrel cage induction motor working on single phase 230 Volts AC both pump & motor mounted on common base plate alongwith suitable rigid foundation, nuts, bolts in an approved manner complete all a specified and directed. Make- Kirloskar / Crompton / Beacon / CRI Coimbatore

(Description of serial item No. 4.00 here-in-above Contd...........) Note :- Following are included in the unit rate of this items. Nothing extra shall be paid on this account :- (i) Pump, monoblockl, horizontal, spilt type not less than 115 LPM discharge at 45 mtr head 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor complete with fittings, cutting, welding work as required at site to connect with the existing suction/discharge pipe line. (ii) Squirrel cage indication motor, TEFC, single Phase 230 Volts 50 C/S AC supply 1440 RPM, not less than 5 HP directly coupled to centrifugal pump set . (iii) Common base foundation of ISMC-100 suitable for installation of above pump set duly drilled holes and painted with two coats synthetic enameled paint over a coat of red oxide primer. (iv) Pipe fittings etc reqd for connecting with the existing suction discharge pipe line including cutting / welding as required at site and as directed.

Supplying, installing, testing and commissioning of monoblock pump set, electric motor driven capacity not less than 380 LPM at 45 metre head in load C.I casing single stage with impeller, bronze working parts stainless steel shaft and directly coupled to motor, 'B' class insulation, squirrel cage induction motor working on three phase 415 volts AC both pump & motor mounted on common base plate alongwith suitable rigid foundation, nuts, bolts in an approved manner complete all a specified. Make- Kirloskar / Crompton / Beacon / CRI Coimbatore

(Description of serial item No. 5.00 here-in-above Contd...........) Note:- Following are included in the unit rate of this items. Nothing extra shall be paid on this account :- (i) Pump, centrifugal, horizontal, spilt type not less than 380 LPM discharge at 45 mtr head 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor through flexible coupling complete with fittings,cutting,welding work as required at site to connect with the existing suction/discharge pipe line. (ii) Squirrel cage indication motor, TEFC, 3 Phase 415 Volts 50 C/S AC supply 1440 RPM,not less than 10 HP directly coupled to centrifugal pump set . (iii) Common base foundation of ISMC-100 suitable for installation of above pump set duly drilled holes and painted with two coats synthetic enameled paint over a coat of red oxide primer. (iv) Pipe fittings etc reqd for connecting with the existing suction discharge pipe line including cutting / welding as required at site and as directed.

Supplying, installing, testing and commissioning of monoblock pump set, electric motor driven capacity not less than 365 LPM at 23.5 metre head in load C.I casing single stage with impeller, stainless steel shaft and directly coupled to motor, 'B' class insulation, squirrel cage induction motor working on three phase 415 volts AC both pump & motor mounted on common base plate alongwith suitable rigid foundation, nuts, bolts with coupling gurads and antivibration rubber pads in an approved manner complete all a specified and directed. Make : Kirloskar / Crompton / Beacon / CRI Coimbatore

(Description of serial item No. 6.00 here-in-above Contd...........) Note :- Following are included in the unit rate of this items. Nothing extra shall be paid on this account :- (i) Pump, centrifugal, horizontal, spilt type not less than 365 LPM discharge at 23.5 mtr head 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor complete with fittings,cutting,welding work as required at site to connect with the existing suction/discharge pipe line. (ii) Squirrel cage indication motor, TEFC, 3 Phase 415 Volts 50 C/S AC supply 1440 RPM, not less than 5 HP directly coupled to centrifugal pump set . (iii) Common base foundation of ISMC-100 suitable for installation of above pump set duly drilled holes and painted with two coats synthetic enameled paint over a coat of red oxide primer. (iv) Pipe fittings etc reqd for connecting with the existing suction discharge pipe line including cutting / welding as required at site and as directed.

S&F On-load change over switch I-O-II, open execution, 4 Pole confirming to IS: 13947, 200 Amps with handle fixed in existing electrical panel and all electrical connection complete all as specified and directed.

Supplying, installing, testing and commissioning of centrifugal pump electric motor driven capacity not less than 25000 GPH at 55 metre head in load CI casing single stage with impeller, bronze working parts stainless steel shaft and directly coupled to motor, 'B' class insulation, squirrel cage induction motor working on three phase 415 volts AC both pump & motor mounted on common base plate alongwith suitable rigid foundation, nuts, bolts with coupling gurads and antivibration rubber pads in an approved manner complete all a specified. Make- Kirloskar / Crompton / Beacon / CRI Coimbatore

(Description of serial item No. 8.00 here-in-above Contd...........) Note :- Following are included in the unit rate of this items. Nothing extra shall be paid on this account :- (i) Pump, centrifugal, horizontal, spilt type not less than 25,000 GPH discharge at 55 mtr head 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor through flexible coupling complete with fittings,cutting,welding work as required at site to connect with the existing suction/discharge pipe line. (ii) Squirrel cage indication motor, TEFC, 3 Phase 415 Volts 50 C/S AC supply 1440 RPM, not less than 30 HP directly coupled to centrifugal pump set . (iii) Common base foundation of ISMC-100 suitable for installation of above pump set duly drilled holes and painted with two coats synthetic enameled paint over a coat of red oxide primer. (iv) Pipe fittings etc reqd for connecting with the existing suction discharge pipe line including cutting / welding as required at site and as directed.

Supplying, installing, testing and commissioning of centrifugal pump electric motor driven capacity not less than 40,000 GPH at 50 metre head in load CI casing single stage with impeller, bronze working parts stainless steel shaft and directly coupled to motor, 'B' class insulation, squirrel cage induction motor working on three phase 415 volts AC both pump & motor mounted on common base plate alongwith suitable rigid foundation, nuts, bolts with coupling gurads and antivibration rubber pads in an approved manner complete all a specified. Make : Kirloskar / Crompton / Beacon / CRI Coimbatore

(Description of serial item No. 9.00 here-in-above Contd...........) Note:- Following are included in the unit rate of this items. Nothing extra shall be paid on this account :- (i) Pump, centrifugal, horizontal, spilt type not less than 40,000 GPH discharge at 50 mtr head 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor through flexible coupling complete with fittings,cutting,welding work as required at site to connect with the existing suction/discharge pipe line. (ii) Squirrel cage indication motor, TEFC, 3 Phase 415 Volts 50 C/S AC supply 1440 RPM,not less than 40 HP directly coupled to centrifugal pump set . (iii) Common base foundation of ISMC-100 suitable for installation of above pump set duly drilled holes and painted with two coats synthetic enameled paint over a coat of red oxide primer. (iv) Pipe fittings etc reqd for connecting with the existing suction discharge pipe line including cutting / welding as required at site and as directed.

Supplying, installing, testing and commissioning of centrifugal pump electric motor driven capacity not less than 12,000 GPH at 56 metre head in load C.I casing single stage with impeller, bronze working parts stainless steel shaft and directly coupled to motor, 'B' class insulation, squirrel cage induction motor working on three phase 415 volts AC both pump & motor mounted on common base plate alongwith suitable rigid foundation, nuts, bolts with coupling gurads and antivibration rubber pads in an approved manner complete all a specified. Make : Kirloskar / Crompton / Beacon / CRI Coimbatore

(Description of serial item No. 10.00 here-in-above Contd...........) Note :- Following are included in the unit rate of this items. Nothing extra shall be paid on this account :- (i) Pump, centrifugal, horizontal, spilt type not less than 12,000 GPH discharge at 56 mtr head 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor through flexible coupling complete with fittings,cutting,welding work as required at site to connect with the existing suction/discharge pipe line. (ii) Squirrel cage indication motor, TEFC, 3 Phase 415 Volts 50 C/S AC supply 1440 RPM,not less than 20 HP directly coupled to centrifugal pump set . (iii) Common base foundation of ISMC-100 suitable for installation of above pump set duly drilled holes and painted with two coats synthetic enameled paint over a coat of red oxide primer. (iv) Pipe fittings etc reqd for connecting with the existing suction discharge pipe line including cutting / welding as required at site and as directed.

Supplying, installing, testing and commissioning of centrifugal pump electric motor driven capacity not less than 40,000 GPH at 40 metre head in load C.I casing single stage with impeller, bronze working parts stainless steel shaft and directly coupled to motor, 'B' class insulation, squirrel cage induction motor working on three phase 415 volts AC both pump & motor mounted on common base plate alongwith suitable rigid foundation, nuts, bolts with coupling gurads and antivibration rubber pads in an approved manner complete all a specified. Make : Kirloskar / Crompton / Beacon / CRI Coimbatore

(Description of serial item No. 11.00 here-in-above Contd...........) Note :- Following are included in the unit rate of this items. Nothing extra shall be paid on this account :- (i) Pump, centrifugal, horizontal, spilt type not less than 40,000 GPH discharge at 40 mtr head 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor through flexible coupling complete with fittings,cutting,welding work as required at site to connect with the existing suction/discharge pipe line. (ii) Squirrel cage indication motor, TEFC, 3 Phase 415 Volts 50 C/S AC supply 1440 RPM,not less than 40 HP directly coupled to centrifugal pump set . (iii) Common base foundation of ISMC-100 suitable for installation of above pump set duly drilled holes and painted with two coats synthetic enameled paint over a coat of red oxide primer. (iv) Pipe fittings etc reqd for connecting with the existing suction discharge pipe line including cutting / welding as required at site and as directed.

Supplying, installing, testing and commissioning of centrifugal pump electric motor driven capacity not less than 10,000 GPH at 28 metre head in load C.I casing single stage with impeller, bronze working parts stainless steel shaft and directly coupled to motor, 'B' class insulation, squirrel cage induction motor working on three phase 415 volts AC both pump & motor mounted on common base plate alongwith suitable rigid foundation, nuts, bolts in an approved manner complete all a specified and directed. Make- Kirloskar / Crompton / Beacon / CRI Coimbatore

(Description of serial item No. 12.00 here-in-above Contd...........) Note :- Following are included in the unit rate of this items. Nothing extra shall be paid on this account :- (i) Pump, centrifugal, horizontal, spilt type not less than 10,000 GPH discharge at 28 mtr head 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor through flexible coupling complete with fittings,cutting,welding work as required at site to connect with the existing suction/discharge pipe line. (ii) Squirrel cage indication motor, TEFC, 3 Phase 415 Volts 50 C/S AC supply 1440 RPM,not less than 7.5 HP directly coupled to centrifugal pump set . (iii) Common base foundation of ISMC-100 suitable for installation of above pump set duly drilled holes and painted with two coats synthetic enameled paint over a coat of red oxide primer. (iv) Pipe fittings etc reqd for connecting with the existing suction discharge pipe line including cutting / welding as required at site and as directed.

Supplying, installing, testing and commissioning of centrifugal pump electric motor driven capacity not less than 6,000 GPH at 30 metre head in load CI casing single stage with impeller, stainless steel shaft and directly coupled to motor, 'B' class insulation, squirrel cage induction motor working on three phase 415 volts AC both pump & motor mounted on common base plate alongwith suitable rigid foundation, nuts, bolts in an approved manner complete all a specified and directed. Make- Kirloskar / Crompton / Beacon / CRI Coimbatore

(Description of serial item No. 13.00 here-in-above Contd...........) Note :- Following are included in the unit rate of this items. Nothing extra shall be paid on this account :- (i) Pump, centrifugal, horizontal, spilt type not less than 6,000 GPH discharge at 30 mtr head 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor complete with fittings,cutting,welding work as required at site to connect with the existing suction/discharge pipe line. (ii) Squirrel cage indication motor, TEFC, 3 Phase 415 Volts 50 C/S AC supply 1440 RPM, not less than 7.5 HP directly coupled to centrifugal pump set . (iii) Common base foundation of ISMC-100 suitable for installation of above pump set duly drilled holes and painted with two coats synthetic enameled paint over a coat of red oxide primer. (iv) Pipe fittings etc reqd for connecting with the existing suction discharge pipe line including cutting / welding as required at site and as directed.

Supply, installation, testing and commissioning of Raw water non clog submersible pump set, 12.5 HP,1200 LPM discharge capacity with 12 mtr head, including connection cable of suitable size from pump to starter panel, MS suction pipe Flanged type of size 100mm of 6 mtr length, suitable star delta starter (Model MU-G15) for operating pump set complete all as specified and directed.

Supplying, installing, testing and commissioning of centrifugal pump electric motor driven capacity not less than 12500 GPH at 15 metre head in load CI casing single stage with impeller, stainless steel shaft and directly coupled to motor, 'B' class insulation, squirrel cage induction motor working on three phase 415 volts AC both pump & motor mounted on common base plate alongwith suitable rigid foundation, nuts, bolts with coupling gurads and antivibration rubber pads in an approved manner complete all a specified and directed. Make : Kirloskar / Crompton / Beacon / CRI Coimbatore

(Description of serial item No. 15.00 here-in-above Contd...........) Note :- Following are included in the unit rate of this items. Nothing extra shall be paid on this account :- (i) Pump, centrifugal, horizontal, spilt type not less than 125,00 GPH discharge at 15 mtr head 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor through flexible coupling complete with fittings,cutting,welding work as required at site to connect with the existing suction/discharge pipe line. (ii) Squirrel cage indication motor, TEFC, 3 Phase 415 Volts 50 C/S AC supply 1440 RPM,not less than 20 HP directly coupled to centrifugal pump set . (iii) Common base foundation of ISMC-100 suitable for installation of above pump set duly drilled holes and painted with two coats synthetic enameled paint over a coat of red oxide primer. (iv) Pipe fittings etc reqd for connecting with the existing suction discharge pipe line including cutting / welding as required at site and as directed.

Supply, install, connecting & testing electric driven submersible pump set of capacity 7.5 HP, Three Phase, 50 Hz, 415 Volts, minimum discharge capacity 2000 Gallon/Hour (01 Gallon = 4.54 litre) at total 30 Mtr head, stainless steel body with inlet filter, with star Delta starter suitable for 7.5 HP submersible pump & including necessary fixing arrangement as required at site complete all as specified & as directed.

Supply, install, connecting & testing electric driven submersible pump set of capacity 7.5 HP, Three Phase, 50 Hz, 415 Volts, minimum discharge capacity 8000 Gallon/Hour at total 28 mtr head, stainless steel body with inlet filter including necessary fixing arrangement as required at site complete all as specified & as directed.

Supply, install, connecting & testing electric driven submersible pump set of capacity 7.5 HP, Three Phase, 50 Hz, 415 Volts, minimum discharge capacity 3000 Gallon/Hour at total 30 mtr head, stainless steel body with inlet filter including necessary fixing arrangement as required at site complete all as specified & as directed.

Supply, install, connecting & testing electric driven submersible pump set of capacity 7.5 HP, Three Phase, 50 Hz, 415 Volts, minimum discharge capacity 8000 Gallon/Hour at total 50 mtr head, stainless steel body with inlet filter including necessary fixing arrangement as required at site complete all as specified & as directed.

Supply, install, connecting & testing electric driven submersible pump set of capacity 7.5 HP, Three Phase, 50 Hz, 415 Volts, minimum discharge capacity 4000 Gallon/Hour at total 70 mtr head, stainless steel body with inlet filter including necessary fixing arrangement as required at site complete all as specified & as directed.

Supply, installation, testing and commissioning of pressure filter of capacity 1000 GPH, consisting of single media/mono media silica quartz Fine Sand used for efficient filtration, Quality sand Media as per IS code, supporting Layers of gravels and pebbles, complete all as specified and directed.

Supply, installation, testing and commissioning of pressure filter of capacity 2000 GPH, consisting of single media/mono media silica quartz Fine Sand used for efficient filtration, Quality sand Media as per IS code, supporting Layers of gravels and pebbles, complete all as specified and directed.

Supply, Installation, testing and commissioning of Air Blower with 11 KW motor, pressure gauge, Air flow of capacity 1200 CFM, complete all as specified and directed.

S&F Cast iron non return valve / reflux valve with rubber seat flanged type with by pass arrangement suitable for 150mm bore pipe, ISI marked, Class PN-1.6 conforming to IS-5312/2004 with nuts, bolts, washers and jointing with necessary ruber gasket etc complete all as specified and directed.

S&F Cast iron non return valve / reflux valve with rubber seat flanged type with by pass arrangement suitable for 100 mm bore pipe, ISI marked, Class PN-1.6 conforming to IS-5312/2004 with nuts, bolts, washers and jointing with necessary ruber gasket etc complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundation for stays & mass concrete including necessary form work as required and fair finishing complete all as specified and directed. Note : Rates included disconnecting of all electric connections and taking down old unserviceable pump motor/ pressure filter/ Air blower and DG Set and depositing the same in AGE E/M Store.

Supply, installation, commissioning and testing of Diesel Generating set out door type alongwith having prime mover rating of 82.5 KVA capacity 415 Volt, AC 3 Phase 04 wire 1500 RPM, 0.8 lagging power factor at 415 Volt suitable for 50 Hz 3 phase system with micro based control system including in built retrofitting emission control device as per latest IS specification and CPCB (Central Pollution Control Board) norms-IV and noise level shall not exceed 75 decibel at distance of 01 Mtr with all standard accessories i.e, tool box & tools including as required size of PCC foundation as per recommendation of manufacturer (OEM) and comprising the following :- (a) Diesel Engine :- Diesel Engine 4 stroke water cooled electric start of suitable BHP at 1500 RPM suitable for output of alternator at 47 degree C, 50% RH and confirming to IS 10001 Engine capable for taking 10% overloading for 1 Hour after 06 Hours of continuous operation. The engine will be fitted complete with all the required accessories:- (b) Engine mounted instrument panel fitted with and having digital display for following:- (i) Start stop switch with key. (ii) Water temperature indication. (iii) Lubrication oil pressure indication. (iv) Battery charging indication. (v) RPM indication. (vi) Oil temperature indication. (vii) Low lubrication oil trip indication. (viii) Engine hour indication. (Description of serial item No. 27.00 Contd...)

(Description of serial item No. 27.00 here-in-above Contd...........) (c) Alternator :- Synchronous alternator rated at 82.5 KVA at 1500 RPM 415 Volt at NTP 0.8 power factor 3 Phase 50 Hz, AC supply confirming to IS 4722. The alternator shall be having SPDP enclosure, brush less, continuously self excitation and self regulated as confirming to latest IS suitable for tropical conditions with H Class insulations. (d) Base frame and foundation :- Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement foundation and vibration isolation arrangement as per recommendation of manufacturer.

(Description of serial item No. 27.00 here-in-above Contd...........) (e) Fuel tank:- Fuel tank of suitable capacity fabricated out of 3mm thick MS sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class C pipe of suitable dia complete with valves, level indication and accessories as required as per specifications. (f) Exhaust system:- Dry exhaust manfold with hospital exhaust silencer and catalytic converter. (g) Starting system:- 12 Volt/24 Volt starting system comprising of starter motor, voltage regulator and arrangement for initial excitation with complete with suitable numbers of batteries (lead acid type) as required as per specifications. (h) Acoustic and weather proof enclosure with arrangement for fresh air inlet for cooling of the engine and alternator, excitation, discharging hot air into the atmosphere as per specifications. (j) Control Panel & AMF Panel :- Control panel and AMF panel 415 volts 3 phase, 4 wire 50 cycles fabricated out of 2mm thick MS sheet and powder coated painted internally and externally complete with copper bus bars with suitable capacity with incoming / outgoing terminals control wiring with copper cable of suitable size for 82.5 KVA DG Set including all engine and alternator control switches and indicator as per manufacturer desgn and comprising of the following :- (i) MCCBs of 200 Amp capacity 415 volts 4 Pole, rupturing capacity 50 KA for incoming/ outgoing with over load and short circuit protections - 03

(Description of serial item No. 27.00 here-in-above Contd...........) (ii) Voltmeter and Ammeter with selector switches and CTs of suitable capacity. (iii) Power factor and frequency, RPM, running hours counter, water temperature, lubricant oil pressure meters. (iv) Indicator lamps (LED type) to indicate RYB and for load on and set running, battery charger ON (v) Failure indication (LED type) over/under speed, fail to start, low oil pressure, battery charger failure (vi) Engine start and stop push buttons. (vii) Battery charging indicator lamp - 01 No (viii) Instrument fuses and control wiring - 01 set (ix) Auto/ Manual test switch - 01 No (x) Under voltage relay - 01 No

(Description of serial item No. 27.00 here-in-above Contd...........) (xi) Digital electronic mortification meter (Timer) - 01 No (xii) Over load relay (xiii) By pass arrangement with rotary by pass switch AC 4 pole suitable Amp rating to isolate AMF Panel (xiv) Four Pole power contactor of suitable capacity - 03 Nos (xv) Automatic Battery Charger - 01 No, SMPS based inbuilt, auto/ manual & float / boost facility. (xvi) Microprocessor based power command control for DG set monitoring metering and control having protection of over current short circuit, high/ low voltage, under/ over frequency, reverse power, excitation protection, field failure relay, differential relay all as specified. Note:- (i) Initial filling of lubricating oil/ coolant and fuel required for testing will be provided by the contractor without any extra cost. (ii) All arrangement for testing of DG set shall be made by contractor with in overall cost quoted. (iii) Pre-commissioning test shall be carried out by rep of Accepting Officer. Test for DG set shall be carried out for duration of 12 Hours.

Disconnecting and taking down carefully existing unserviceable Diesel Generating Set out door type alongwith having prime mover rating of capacity 82.5 KVA to 100 KVA, 415 Volt, AC 3 Phase 04 wire with all accessories and depositing the same to store yard of AGE E/M (Army) Suratgarh complete all as specified and directed.

Supply, installation, commissioning and testing of Diesel Generating set out door type alongwith having prime mover rating of 100 KVA capacity 415 Volt, AC 3 Phase 04 wire 1500 RPM, 0.8 lagging power factor at 415 Volt suitable for 50 Hz 3 phase system with micro based control system including in built retrofitting emission control device as per latest IS specification and CPCB (Central Pollution Control Board) norms-IV and noise level shall not exceed 75 decibel at distance of 01 Mtr with all standard accessories i.e, tool box & tools including as required size of PCC foundation as per recommendation of manufacturer (OEM) and comprising the following :- (a) Diesel Driven Engine :- Diesel Engine 4 stroke water cooled electric start of suitable BHP at 1500 RPM suitable for output of alternator at 47 degree C, 50% RH and confirming to IS 10001 Engine capable for taking 10% overloading for 01 Hour after 06 Hours of continuous operation. The engine will be fitted complete with all the required accessories:- (b) Engine mounted instrument panel fitted with and having digital display for following:- (i) Start stop switch with key. (ii) Water temperature indication. (iii) Lubrication oil pressure indication. (iv) Battery charging indication. (v) RPM indication. (vi) Oil temperature indication. (vii) Low lubrication oil trip indication. (viii) Engine hour indication. (Description of serial item No. 29.00 Contd...)

(Description of serial item No. 29.00 here-in-above Contd...........) (c) Alternator :- Synchronous alternator rated at 100 KVA at 1500 RPM 415 Volt at NTP 0.8 power factor 3 Phase 50 Hz, AC supply confirming to IS 4722. The alternator shall be having SPDP enclosure, brush less, continuously self excitation and self regulated as confirming to latest IS suitable for tropical conditions with H Class insulations. (d) Base frame and foundation :- Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement foundation and vibration isolation arrangement as per recommendation of manufacturer.

(Description of serial item No. 29.00 here-in-above Contd...........) (e) Fuel tank:- Fuel tank of suitable capacity fabricated out of 3mm thick MS sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class C pipe of suitable dia complete with valves, level indication and accessories as required as per specifications. (f) Exhaust system:- Dry exhaust manfold with hospital exhaust silencer and catalytic converter. (g) Starting system:- 12 Volt/24 Volt starting system comprising of starter motor, voltage regulator and arrangement for initial excitation with complete with suitable numbers of batteries (lead acid type) as required as per specifications. (h) Acoustic and weather proof enclosure with arrangement for fresh air inlet for cooling of the engine and alternator, excitation, discharging hot air into the atmosphere as per specifications. (j) Control Panel & AMF Panel :- Control panel and AMF panel of size 1.5m x 1.5m x 0.60m, fabricated out of 2mm thick CRCA sheet indoor pedestal type support on MS iron channel 75x40mm, totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary stickering of switcher gear about termination of switch gear and the nuts, bolts etc used are to be made of rust proof materials including as per IS 8623 copper bus bars with insulators suitable for three phase and four wire LT AC, 50 Hoz, 415 Volts, 240 Amp capacity with powder coated with incoming / outgoing terminals control wiring with copper cable of suitable size for 100 KVA DG Set, including all engine and alternator control switches and indicator as per manufacturer desgn and comprising of the following :- (i) MCCBs of 160 Amp capacity 415 volts 4 Pole, rupturing capacity 36 KA for incoming/ outgoing with over load and short circuit protections - 02 Nos

(Description of serial item No. 29.00 here-in-above Contd...........) (ii) Power Contractor 160 Amp, 4 Pole - 02 Nos. (iii) MCBs 32 Amp, 415 volts, Double Pole, rupturing capacity 10 KA - 01 Nos (iv) MCBs 20 Amp, 240 volts, Single Pole, rupturing capacity 10 KA - 09 Nos (v) MCBs 6 Amp, 240 volts, Single Pole, rupturing capacity 10 KA - 03 Nos (vi) SMPS Battery Charger 24 Volt - 01 Nos (vii) AMF Relay EC-2 Model - 01 Nos (viii) Auto Manual Selector Switch - 01 Nos (ix) PLA Relay - 04 Nos (x) ON-OFF Push Button (R + G) - 03 Nos (xi) ON-OFF Lamp (R + G) (1 + 1) - 03 Nos (xii) Emergency Stop Push Button Red- 01 Nos (xiii) Hooter - 01 Nos (xiv) Digital Amp + Volt meter with inbuilt selector switch - 01 Set (xv) LED indicator lamp RYB - 03 Nos (xvi) CT Ratio 200/5 VA - 03 Nos

(Description of serial item No. 29.00 here-in-above Contd...........) Note:- (i) Initial filling of lubricating oil/ coolant and fuel required for testing will be provided by the contractor without any extra cost. (ii) All arrangement for testing of DG set shall be made by contractor with in overall cost quoted. (iii) Pre-commissioning test shall be carried out by rep of Accepting Officer. Test for DG set shall be carried out for duration of 12 Hours.

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 120 sqmm 3.5 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc including dismantling & taking out old unserviceable cable complete all as specified and directed. Notes:- (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.

M&L for dry sand (Local Tibba sand) and punning for cushioning and cover for protection of under ground electric cable complete all as specified and as directed. Notes:- (i) Approved local Tibba dry sand free from vegetations, grass and other deleterious substances shall be used. (ii) For the purpose of payment, only punned thickness shall be measured.

M&L for sub class ‘B’ (old size) burnt clay bricks laid flat and dry abutting each other with gap between adjacent bricks not exc. 10mm for protection of underground electric cable in such a way that the length of brick is at right angle to the central axis of cable complete all as specified and as directed.

M&L for Galvanized iron tubing, 80mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (25mmx3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately.

S&F MCCB 4 Pole 160 Amps, thermal magnetic having, breaking capacity 36 KA, 415 Volt in the existing feeder pillar box including any addition / alteration to the panel to accommodate the new MCCB & making connections with 25x3 mm copper strip as required from main bus bars, making necessary welding work, metal work for fixing base plate etc and connections, complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to & including galvanized iron strip 32x6mm as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted/welded to earth plate at one end and other end of strip connected to test point with two Nos nuts bolts or welding with steel structure, GI earth strip encased in and including 40mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40mm thick pre-cast RCC (1:2:4 type B1) cover with 40x40x3mm MS angle iron fram complete all as specified and shown in electrical plate No 3 of SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m complete all as specified and as directed including dismantling & taking out old existing unserviceable earthing. Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner.

M&L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all sides, connected to & including galvanized iron strip 32x6mm as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted/welded to earth plate at one end and other end of strip connected to test point with two Nos nuts bolts or welding with steel structure, GI earth strip encased in and including 40mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40mm thick pre-cast RCC (1:2:4 type B1) cover with 40x40x3mm MS angle iron fram complete all as specified and shown in electrical plate No 3 of SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m complete all as specified and as directed. Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner.