Military Engineer Services Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 1,16,177Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_706808_1Tender No
80346Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm soft disintegrated soil complete all as specified and as directed.
1
-
-
... More
Removing excavated material exc 1.5 km but n exc 5.00 km and depoting where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.
25
-
-
... More
Excavation over area hard dense soil complete all as specified and as directed.
20
-
-
... More
M&L for cement concrete 1:4:8 of type D2 (using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and as directed.
30
-
-
... More
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
22.5
-
-
... More
Supply only liquid water proofing compound (tapecrete or equivalent) complete all as specified and as directed.
10
-
-
... More
Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar complete all as specified and as directed.
100
-
-
... More
Removing mortar from and cleaning stones, obtained from masonry of any description (except ashlar facings and dressed stone work) and stone setts from pavings; stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and as directed.
50
-
-
... More
M&L for walling of Square rubble regular coursed , well bonded ,bedded and solidly hearted built in CM 1:6 complete all as specified and as directed.
26
-
-
... More
Discription of above item No-12 but except stone complete all as specified and as directed.
50
-
-
... More
Cutting openings in stone wall through walls for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises Old masonry walls built in cement mortar complete all as specified and as directed.
10
-
-
... More
Forming jambs, etc., to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete new work in cement mortar 1:4 complete all as specified and as directed.
10
-
-
... More
Making good under cills (or over arches, lintels and bressummers) including all pinning as necessary new work in CM 1:4 complete all as specified and as directed.
5
-
-
... More
Cutting into old masonry to form toothings for and bonding in new brick or stone work including making good in cement mortar complete all as specified and as directed.
2.4000000000000004
-
-
... More
Form work to sides of concrete foundations ,footings , bases of columns ,raft and raft beams , sides and soffits ( if any) of foundation and plinth beams and milar vertical or to a batter flat fair finished surface complete all as specified and as directed.
40
-
-
... More
M&L for (Design mix) M-25 providing reinforced cement concrete type B-1 (1:2:4) using 20 mm graeded stone aggregate as in foundation ,including rafts,footings foundation beams , plinth beams, bases of columns etc ,basement slab ,underreamed piles and mass concrete complete all as specified and as directed.
16
-
-
... More
M&L for form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) fair finished surfaces of concrete flat complete all as specified and as directed.
18
-
-
... More
M&L for providing design mix M-25 reinforced cement concrete as in roof slabs supported on walls surfaces of concrete flat complete all as specified and as directed.
3
-
-
... More
M&L for form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc fair finished surfaces of concrete flat complete all as specified and as directed.
21
-
-
... More
M&L for providing reinforced cement concrete type B-1 (1:2:4) using 20 mm graeded stone aggregate as in beam, cantilever,bressumers, lintel over 1.5 mtr span concrete flat complete all as specified and as directed.
2.835
-
-
... More
M&L for form work to chullah hoods ,chajjas .troughs and similar works including edges complete all as specified and as directed.
5
-
-
... More
M&L for reinforcement cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in chajjas complete all as specified and as directed.
1
-
-
... More
M&L for form work to edges of concrete flates ,treads break in floors ,window cills ,concrete railings , openings in concrete walls, floor and roofs n exc 20 cm wide and sisides of RCC/PCC bands in walls, horizontal or sloping and ssimilar work exc 10 cm but n. exc 20 cm wide rough finished surface of concrete complete all as specified and as directed.
25
-
-
... More
Form work to sides of pillars , posts , struts , piers , columns and stantions rough finished surface square , rectangular or polygonal complete all as specified and as directed.
25.6
-
-
... More
M&L for providing reinforced cement concrete type B1 (1:2:4) ung 20 mm graeded stone aggregate as in columns ,pillars piers ,posts and struts complete all as specified and as directed.
2.5600000000000005
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed.
4
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqmeach complete all as specified and directed.
4
-
-
... More
M&L for anodised aluminium frame for doors ,windows,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
25
-
-
... More
M&L for anodised aluminium door shutters, aluminium section weight 0.55kg/m including necessary joining cleats,glazing clips,rubber neoprene packing,handle 2 Nos in each door, hinges ,anodised aluminium beading screws etc complete all as specified and as directed.
8
-
-
... More
M&L for anodised aluminium window and ventilator shutters, fixed type without sash bar aluminium section weight 0.55kg/m including necessary joining cleats,glazing clips,rubber packing ,anodised aluminium snap beading,screws etc complete all as specified and as directed.
2
-
-
... More
S&F for 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed.
36
-
-
... More
S&F for 4 mm thick sheet ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and as directed.
2
-
-
... More
S&F for 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and as directed.
7
-
-
... More
S&F for 200 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
4
-
-
... More
S&F for 300 mm long aluminium sliding door bolts, plate type , stove enamelled black, with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.
4
-
-
... More
S&F for 100 mm size aluminium handle cast type anodised complete all as specified and as directed.
8
-
-
... More
S&F for 150 mm size aluminium handle cast type anodised complete all as specified and as directed.
4
-
-
... More
S&F for factory made UPVC white colour Two track two panels sliding window upto 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm) comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note:- For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
2
-
-
... More
S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge.
10
-
-
... More
M&L for Mild steel J hook rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 30 cm long Diameter of neck in 25 mm complete all as specified and as directed.
50
-
-
... More
M&L for TMT bars 10 mm and over cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to complete all as specified and as directed.
1225
-
-
... More
Discription as above item No-44.00 but 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
500
-
-
... More
S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
20
-
-
... More
S&F for rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates complete all as specified and as directed.
300
-
-
... More
M&L for framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and ssimilar work conforming to Fe-410 complete all as specified and as directed.
100
-
-
... More
M&L for applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation complete all as specified and as directed.
80
-
-
... More
S&F for MS flat for securing purlin to trusses or rafters, wind ties, knee piece and ssimilar work complete all as specified and as directed.
5
-
-
... More
M&L for plates ( plain or chequered ) channels square ,cut or notched ( ordinary and counter sunk) forming holes with riveted , bolted or welded attachment Fe Gde 410-w complete all as specified and as directed.
353.7
-
-
... More
S&F for Steel rollig shutters, without ball bearing, with 1.25mm thick laths , gear operated type with bevel gear box and crank handle chain wheel and hand chain as specified including top cover ,anchoring rod, hasp and staple and one coat of primer; erected in positon as indicated, complete: push pull or manual type complete as specified and directed.
12
-
-
... More
M&L for preparing steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on new surface over 10 cm width or girth complete all as specified and as directed.
28.799999999999997
-
-
... More
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
80
-
-
... More
M&L for Anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed.
80
-
-
... More
Providing and fixing for Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.
80
-
-
... More
Taking down old water proofing treatment from roof complete all as specified and as directed.
75
-
-
... More
M&L for Bitumen primer for use in waterproofing dampproofing treatment @ 0.3 kg/Sqm complete all as specified and as directed.
80
-
-
... More
Applying evenly a tack coat of bitumen of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning cleaning surfaces complete all as specified and as directed.
80
-
-
... More
M&L for APP based polymeric membrane minimum weighting 3 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.
80
-
-
... More
M&L for two coats for camaflounge painting on roof surface including surface preparation anf primer complete all as specified and as directed.
80
-
-
... More
M&L for hard core of gauge exc 63mm but not exc 100 mm depoted ,spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface broken stone or boulders complete all as specified and as directed.
19.65
-
-
... More
M&L for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm stone agg) as in path finishing cement concrete even amd smooth without using extra cement complete all as specified and as directed.
130
-
-
... More
M&L for 100mm thick cement concrete 1:2:4 of type B-2 (40mm graded stone agg.) as in floorand surface finished even and smooth without ung extra cement and complete all as specifeid and as directed.
130
-
-
... More
M&L for forming 20 mm thick expanon joint filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' for 100mm thick slab complete all as specified and as directed.
10
-
-
... More
Providing 100 mm thick PCC 1:3:6 type C-2 (40 mm stone agg) as in sub-base finishing cement concrete even and smooth without ung extra cement complete all as specified and as directed.
130
-
-
... More
M&L for 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:4 complete all as specified and as directed.
50
-
-
... More
M&L for 25 mm thick cement concrete 1:2:4 of type B0 (using 12.5 mm graded stone aggregate) for base of floor complete all as specified and as directed.
50
-
-
... More
M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
5
-
-
... More
M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
50
-
-
... More
M&L for 20-25 mm thick machine cut kota stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in cement mortar 1:4 ,rubbing , polishing complete all as specified and as directed.
24
-
-
... More
M&L for 1mm thick wall care putty on wall including surface preparation complete all as specified and as directed.
175
-
-
... More
Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for complete all as specified and as directed.
2
-
-
... More
S&F for 0.71 mm thick plain aluminium sheeting alloy 31000 H4 in ridges,hips,valley,gutter,drip,and straight flashing (length and girth as fixed) complete all as specified and as directed.
4.5
-
-
... More
Taking down cement or cement lime plaster on brick or or stone walls etc including racking out joints hacking for key and scrubbing down with water etc.complete all as specified and directed.
300
-
-
... More
M&L for rendering 15mm thick in cement plaster 1:6 on surfaces other than fair faces of stone masonry and surface finished even and fair complete all as specified and as directed.
175
-
-
... More
M&L for rendering 10mm thick in CM 1:4 on fair faces of brick or concrete surfaces and complete all as specified and as directed.
175
-
-
... More
M&L for rendering 5 mm thick in CM 1:4 on fair faces of brick with water proofing compound or concrete surfaces and complete all as specified and as directed.
175
-
-
... More
M&L for applying three coats of white wash on ceiling incl preparation of new surfaces complete all as specified and as directed.
23
-
-
... More
M&L for one coat of white wash on walls including preparation of old decorated surface and complete all as specified and as directed.
70
-
-
... More
M&L for two coat of apex on wall including surface preparation and a coat of primer on new wall surface complete all as specified and as directed.
125
-
-
... More
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.
125
-
-
... More
Demolition of cement concrete (un reinforced) in ground floor or pavings of any sidescription n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
100
-
-
... More
Demolition of cement concrete ( reinforced) of any description and in any position not other specifically provided for complete all as specified and as directed.
5
-
-
... More
Supply and mixing Dr Fix-it LW+ of pidilite company to the water of the mix at the dose of 150 ml per one bag of cement complete all as specified and as directed.
7
-
-
... More
Supply only galvanised iron bucket of 20 ltr capacity without bottom circular strip all as specified and directed.
10
-
-
... More
Supply and fixing for fire exiguishers for firefighting against elecrical fire due to oil/diesel/petrol complete all as specified and as directed.
5
-
-
... More
M&L for PCC 75mm thick , 1:4:8 type D-2, using 40mm graded stone aggregate as in sub base all as specified and as directed.
2
-
-
... More
S&F for Tubular towel rail, 20mm dia, D type, 60cm long between flanges brass chromium plated complete all as specified and as directed.
1
-
-
... More
M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
2
-
-
... More
M&L for glazed coloured ceramic tiles in vertical surfaces 300 X 450, 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM 1:4 on other then fair faces of brick work complete all as specified and as directed.
10
-
-
... More
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) finished even and smooth without using extra cement as in plinth protection, laid in panels paths,steps etc all as specified and as directed.
40
-
-
... More
S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube 19mmx19mm x19mm gauge & PDM rubber gasket wealther seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15x15mmx15 gaughe MS square tube inside the 19mmx15mm MS square tube and suitably screwed complete all as specified and as directed.
10
-
-
... More
S&F for factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes 19mmx19mmx19gauge for stiles & 15mmx15mmx19 gauge for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading & joined together with solvent cement etc complete all as specified and as directed.
4
-
-
... More
S&F for anodized aluminium partition or frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
3
-
-
... More
S&F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and as directed.
1
-
-
... More
S&F for peg set 6 (Zinc) Prayag or equivalent as directed by Engineer -in - Charge.
2
-
-
... More
S&F for 110mm bore PVC (SWR) pipes single socketed in any lenghts with rubber vring joints, laid in trenches or in floors etc complete all as specified and as directed.
4
-
-
... More
Discription as perSer Item No-98 above but fixed to walls complete all as specified and as directed.
4
-
-
... More
S&F for 110mm bore PVC (SWR) bends any radius etc complete all as specified and as directed.
6
-
-
... More
S&F for 110mm bore PVC (SWR) junction single(Single T) equal or unequal provided with access door etc complete all as specified and as directed.
3
-
-
... More
S&F for 110mm bore PVC (SWR) vent cowl etc complete all as specified and as directed.
2
-
-
... More
S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.
1
-
-
... More
S&F for 1000 ltrs capacity rotational moulded polyethylene water storage triple layer white tanks (cylindrical verticle with closed top) hoisted and fixed in position complete all as specified and as directed.
1
-
-
... More
S&F for 20 mm dia ball valve ,high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minium wt-210 gms) complete all as specified and as directed.
1
-
-
... More
S&F for 15mm bore of tube steel water tubing medium grade galvanized with all fittings and fixtures fixed complete to walls, ceilings or laid on floors etc complete all as specified and as directed.
10
-
-
... More
Cutting chases, pinning in making good to facing on ston walls & pointing in CM 1:3 for concealed water tubing cutting exc 10 cm but n exc 20 cm girth complete all as specified and as directed.
10
-
-
... More
S&F for 20mm bore of tube steel water tubing medium grade galvanized with all fittings and fixtures fixed complete to walls, ceilings or laid on floors etc complete all as specified and as directed.
10
-
-
... More
S&F for 25mm bore gate valve complete all as specified and as directed.
1
-
-
... More
S&F for 15mm bore fancy type premium quality chromium plated stop cock cast copper alloy, screwed doen, high pressure, screwed bith ends for iron pipe or for unions, complete all as specified and as directed.
3
-
-
... More
S&F for 5mm bore fancy premium quality type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down etc complete all as specified and as directed.
2
-
-
... More
S&F for 75mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement & jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and as directed.
3
-
-
... More
S&F for vitreous China wash basin white flat back size 550 x 400mm including 40x40x5mm angle iron brackets with paint including cutting for and pinning in ends of brackets , CP pillar tap fancy type copper alloy wiith capsten handil scrubbed down high pressure screbbed shanks and fly nuts screwed for iron pipe15mm dia, PVC conection 450mm long with PTMT nuts high presure , brass PTMT waste coupling 32 mm dia with long dcrewrd shanks and fly nuts etc complete all as specified and as directed.
1
-
-
... More
S&F in repair wash down water closet (Pedestal pattern) white complete all as specified and as directed.
1
-
-
... More
S&F for 32mm bore of pipe low density polythylene pipes (LDPE) with fittings as required of pressure rating 6 kgf/cm2 and fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.
1
-
-
... More
S&F for 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & PVC conection 450mm long with PTMT nuts high presure complete all as specified and directed.
2
-
-
... More
S&F for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
4
-
-
... More
S&F for Soap dish, any type, fixed to plugs with chromium plated brass screws prayag or equivalent complete all as specified and as directed.
1
-
-
... More
S&F for 600 X 450mm mirror of selected quality glass mounted on 6mm thick plastic body and fixed to wooden plugs with chromium plated screws complete all as specified and as directed.
1
-
-
... More
M&L On site traditional septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10 user as per TD NO CEAA/TD/78
1
-
-
... More
M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3069 1.2 M dia X 3 M effective depth TD NO CEAA/TD/80
1
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all type of soil complete all as specified and as directed.
6.075
-
-
... More
Returning filling in including spreading, levelling watering and well ramming in layers not exc. 25 cm using excavated soil complete all as specified and as directed.
3
-
-
... More
Removing excavated soil to a distance exceeding 50m but not exceeding 250m and depositing where directed, at a level not exceeding 1.5 M above from starting point etc complete all as specified and as directed.
3.075
-
-
... More
M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
30
-
-
... More
S&F for 150 mm bore salt glazed stone ware grade "A" drain pipes laid in trenches and jointed complete all as specified and as directed.
30
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all type of soil complete all as specified and as directed.
131.25
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in ordinary rock complete all as specified and as directed.
131.25
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in hard rock prohibited where blasting rock complete all as specified and as directed.
1
-
-
... More
Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm hard dense soil complete all as specified and as directed.
5
-
-
... More
Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm soft disintegrated soil complete all as specified and as directed.
0.5
-
-
... More
Removing excavated material exc 1.5 km but n exc 5.00 km and depoting where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.
258
-
-
... More
M&L for cement concrete 1:4:8 of type D2 (using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and as directed.
30
-
-
... More
M&L for walling of Square rubble regular coursed , well bonded ,bedded and solidly hearted built in CM 1:6 complete all as specified and as directed.
90
-
-
... More
M&L for cement concrete 1:2:4 type B-1( 20 mm graded stone agg. )in surface channels and drains complete all as specified and as directed.
5.4
-
-
... More
M&L for flush pointing to stone masonry in CM 1:4 complete all as specified and as directed.
36
-
-
... More
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl moulds, forms, mitred/stripped ends complete all as specified and as directed.
300
-
-
... More
Add or deduct to above mentioned item No-136 for each 25 mm girth or part thereof over or under 30 cm girth complete all as specified and as directed.
1800
-
-
... More
Taking out the existing LT cables of any size after disconnecting from LT Panels, DBs and other similar equipments from trenches, wall etc and kept aside for schedule of credit all as required and directed at site. Note:- Excavation and earth work joints will be measured and paid seprately .
345
-
-
... More
Taking down old Unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc ,complete all as specified and as directed by Engineer-in-Charge.
78
-
-
... More
Taking down old Unserviceable Sub main wiring with two runs of 4,6 sqmm single core PVC insulated ,complete all as specified and as directed by Engineer-in-Charge.
70
-
-
... More
Demolition of cement concrete (un-reinforced) of any description and any position n.exc 15 cm thickness (below or above GL) complete all as specified and as directed by Engineer-in-Charge.
0.1
-
-
... More
Dismantling of existing broken PCC earth chambers of any description and M&L providing earth chamber of size 300 mm x 300mm (Internal size),and depth 280mm and 75mm thick with PCC 1:3:6 type C1 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
M&L for point wiring complete with proper colour coding using, 1100 volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor conforming to IS-694, part-II, ISI marked and in steel conduit, ISI marked with all accessories, fixing on wall/celling/floor/roof etc,suitable size of wooden box with hylum sheet for fixing of switches and sockets complete with chromium plated brass screws including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly complete all as specified and as directed.
26
-
-
... More
Description as per serial item No. 144.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board complete all as specified and as directed.
8
-
-
... More
Description as per item No.144.00 here-in-before but for one ceiling / exhaust fan point controlled by one switch and regulator complete all as specified and as directed.
7
-
-
... More
Description as per serial item No.144.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour complete all as specified and as directed.
37
-
-
... More
M&L for surface Sub main wiring with two runs of 4 sqmm single core PVC insulated unsheathed multistranded with copper conductor cable , 1100 Volts FRLS-H grade ISI marked drawn through in and including stove enamelled steel conduit & including one run of 4 sqmm PVC insulated unsheathed stranded copper conductor cable green in colour for earth continuity conductor and making good the distrubed surfaces after completing the work and clearing the site complete all as specified and directed. Note :- Two runs of 4 sqmm cable and one run of 4 sqmm earth wire and steel conduit pipe shall be measured as one length.
40
-
-
... More
M&L for submain wiring with two run of single core PVC insulated unsheathed multistranded copper conductor cable of size 6 sqmm 1100 volt grade and one run of PVC insulated unsheathed solid copper conductor cable of size 6 sqmm 1100 volt grade as earth continuty conductor drawn through and including steel conduit of suitable size 20/25 mm on roof/wall/ceiling etc all as directed by Engineer-in-Charge.
Note :- Two runs of 6 sqmm cable and one run of 4 sqmm earth wire and steel conduit pipe shall be measured as one length.
30
-
-
... More
M&L for submain wiring with two run of single core PVC insulated unsheathed multistranded copper conductor cable of size 25 sqmm 1100 volt grade and one run of PVC insulated unsheathed solid copper conductor cable of size 25 sqmm 1100 volt grade as earth continuty conductor drawn through and including steel conduit of suitable size on roof/wall/ceiling etc all as directed by Engineer-in-Charge.
Note :- Two runs of 25 sqmm cable and one run of 16 sqmm earth wire and steel conduit pipe shall be measured as one length.
10
-
-
... More
S&F for switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and as directed.
41
-
-
... More
S&F for switch piano, flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and as directed.
37
-
-
... More
S&F for socket outlet, 3 pin (with 2 pin outlet also), 5/6 Amp, flush type, 240 Volts complete all as specified and as directed.
8
-
-
... More
S&F for socket outlet, 2 in 1, 3 pin, 5 and 15 Amp, flush type, 240 Volts complete all as specified and as directed.
37
-
-
... More
S&F for ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 with brushless direct current motor (BLDC) complete all as specified and as directed.
6
-
-
... More
S&F for exhaust fan steel body AC single phase 230/240 v of size 300 mm sweep with louver all as specified and directed by Engineer-in-Charge.
1
-
-
... More
S&F for LED 3000 K warm light luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
10
-
-
... More
S&F for decorative ultra slim liner 3000 k warm LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed.
15
-
-
... More
S&F for LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
1
-
-
... More
S&F for Ceiling rose with earth terminal connection, 3 terminal PVC/ polycarbonate body complete all as specified and as directed.
17
-
-
... More
S&F for LED flood lights not less than 150 watts, nominal voltage 240 volts, 50 Hz, high efficiency long life complete all as specified and directed.
2
-
-
... More
S&F for Sheet Metal enclosure for VTPN DBs, 4 Ways, Double Door(IP-43), built- in bus bars complete suitable for 415 Volts, AC, 50 Hz supply, suitable for incoming MCCB and outgoing MCBs and fixed in recess in brick masonary wall complete all as specified and directed by the Engineer-in-Charge.
2
-
-
... More
S&F for sheet metal enclosures double door type suitable for fixing Surge protection device (SPD) , with 200 Amps rated bus bar,8 way, 240 Volts complete all as specified and as directed.
1
-
-
... More
Supply,Installation ,Commisionig and testing of 3 phase and neutral ,surge protection devices,havingright neutral position ,suitable for high risk level installation (capacity 50 Kw installation .I-Total -100Ka and suitable for remote status Moinitoring (FS Contact) Complete all as directed at Site .
1
-
-
... More
M&L for 4 Pole MCCB 100, 50 Hz, 415 V with rupturing capacity 16KA. complete including connecting to MCB DB complete all as specified and as directed.
2
-
-
... More
S&F for MCB 32 Amp, single pole & neutral,240 Volt complete all as specified and as directed.
6
-
-
... More
S&F for MCB 6-32 Amp, single pole 240 Volt complete all as specified and as directed.
12
-
-
... More
Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified and as directed.
20
-
-
... More
M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre,charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified and as directed.
2
-
-
... More
M&L for disconnecting, dismantling, taking down outdoor and indoor ductable of Package type AC Plant of capacity 05 TR complete all as specified and as directed.
3
-
-
... More
M&L for Refixing &complete testing commissioning outdoor and indoor ductable of Package type AC Plant of capacity 05 TR complete all as specified and as directed.
3
-
-
... More
S&F in replacement Refrigerant piping insulation with "O" class closed cell electrometric nitrile rubber tubular insulation and complete all as directed by Engineer-in-Charge.
50
-
-
... More
Supply (in company sealed cylinders of any capacity) and charging refrigerant gas R-22 for filling in compressors as per requirement complete all as specified and directed by Engineer-in-Charge.
20
-
-
... More
M&L for nitrogen pressure testing with nitrogen in complete pacakage machine of capacity 5TR with 200 PSI hold pressure for minimum 48 hours after cleaning and flushing complete all as specified and directed by Engineer-in-Charge. Note:- (i)The cost of Nitrogen gas and other material required for pressure test shall be deemed to be included in the quoted rate.
(ii)IF any leakage found the same shall be made good .the rate of the same deemed to be included in unit quoted rate.
1
-
-
... More
S&F for pre-fabricated MS structural steel (IS marked) work consisting of different lattice structures and beams/channels / angles / other sections etc of various sizes and shape, cut / weld / drilled holes etc hot / cold in position for cross arms with FI clamps (full, half D and earth clamp etc) incl necessary MS bolts, nuts etc and painting complete all as specified and as directed.
2
-
-
... More
M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 32 X 6 mm by means of nut, bolts, check nuts and washers of galvanised iron or steel and provision of charcoal dust and common salt packed all around the earth plate including necessary excavation and earth work in any type of soil and testing complete all as specified and directed and shown in electrical plate number 5 of MES SSR part-I(1991). Note:-(a) Excavation and earth work for drilling hole for electrode in any type of Soil.
(b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter.
(c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed
(d) 50 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed.
(e) Requisite quantity of common salt and charcoal.
(f) Testing of earthing.
8
-
-
... More
M&L for cable end termination, jointing kit, HT 11 KV grade, heat shrinkable, outdoor type complete with jointing material suitable for HT XLPE cable 3 core 11 KV grade complete all as specified and directed of following sizes :- (a) 95 Sqmm x 3 core
1
-
-
... More
Supply, installation, commissioning and testing of 200 KVA, 11/0.433 KV (at no load), 3 Phase, 50 Hz, ONAN oil cooled, oil-immersed with oil tank , copper wound, outdoor type step-down transformer, complete with first filling of insulating oil up to the top level in oil tank (IS:335 ISI marked), filtered & dehydrated transformer oil, Dehydrating breather assembly with first fill of dehydrating agent and all standard fittings/accessories as per IS: 1180(Part-1)-2014 (with amendments 1,2,3 & 4). The transformer should be BIS-marked & BEE Star labeled EEL-3, and locking arrangement to put on the plinth with external cooling tubes, core type, delta star connected in accordance with vector symbol DYN-11(vector group-4) with neutral brought on (LV) side, off-circuit tap changer with 7 positions (tapping range +5% to -10% in steps of 2.5%) by means of hand operated off load tap changing gear, and total losses of 603W @ 50% load and 1911W @ 100% load. The transformer has an impedance of 4.5% (as per IS:1180) and will undergo routine tests, type tests, and special tests(as required) as per IS:1180 (Part-1)-2014 & IEC 60076. Factory inspection and testing shall be conducted before dispatch in the presence of the Accepting authority representative. The transformer is provided with One cable end box on HV side having cable glands suitable for 95 sqmm, 3 core XLPE 11 KV HT cable (consisting of 3 Nos porcelain H.T bushings with brass/gun metal bushing rods complete with nuts and & LV cable boxes on secondary (LV) side consisting of 4 Nos porcelain bushings with GM bushing rods complete with GM nuts, and washers and suitable size extended copper bus bar strip for connecting of 185 sqmm 3.5 core cable with cable gland suitable for reception of 1 run of INCOMING LT PVC sheathed armored cables of size 185 sqmm 3.5 core along with the following accessories:-• Name, Rating & Diagram Plate – 1 No. • Off-Circuit Tap Changing Switch – 1 No.• Earthing Terminals – 2 Nos.• Lifting Lugs – 2 Nos.• Oil Level Indicator (Flush Tube) – 1 No. • Oil Drain Valve with Plug – 1 No.• Oil Filter Valve with Plug – 1 No.• Conservator with Oil Filling Hole & Cap – 1 No.• Thermometer Pocket – 1 No. • Air Release Plug – 1 No.• Silica Gel Breather Assembly – 1 No.• Removable Inspection Opening on Top Cover – 1 No.• Explosion Vent – 1 No. • C.I. Rollers Unidirectional wheel with channel – 4 Nos.• HV Cable Box – 1 Set• LV Cable Box – 1 Set• Buchholz Relay (With Alarm & Trip Contacts) – 1 No.• Oil Temperature Indicator (OTI) (With Alarm & Trip Contacts) – 1 No.• Winding Temperature Indicator (WTI) (With Alarm & Trip Contacts) – 1 No.• Marshaling Box (With TTB Only) – 1 No.
Note:-
1. The transformer complies with Gazette Notification CG-DL-E-08042021-226437 dated 8.04.2021.
2. All standard accessories shall be provided as per relevant IS .If any accessories missed out in above but necessary required to make the transformer operational shall be provided. The cost of the same is deemed to be included in unit quoted rate. 3. LT cable shall be measured and paid separate under relevant item.
4. Control cable for buchholz relay, OTI and WTI shall be measure and paid separately under relevant item.
1
-
-
... More
Supply, laying, fixing , connecting and testing control cable, XLPE insulated, PVC inner sheath, galvanised wire/strip armoured, solid copper conductor, 1100 volts grade of follwing sizes :-(a) 2.5sqmm, 4 core
15
-
-
... More
Description all as per item No-148 above but 2.5sqmm, 8 core complete all as specified and as directed.
15
-
-
... More
M&L for Earthing complete with cooper earth plate electrode 60 cm x60 cm x 3.15 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including copper earth wire 20 X 3 mm by means of nut, bolts, check nuts and washers of galvanised iron or steel and provision of charcoal dust and common salt packed all around the earth plate including necessary excavation and earth work in any type of soil and testing complete all as specified and directed and shown in electrical plate number 5 of MES SSR part-I(1991) .Note:- (a) Excavation and earth work for drilling hole for electrode in any type of Soil.
(b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter.
(c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed
(d) 50 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed.
(e) Requisite quantity of common salt and charcoal.
(f) Testing of earthing.
2
-
-
... More
Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) of size 185 Sqmm 3.5 Core & laid in trenches/pipes or fixed on pole Complete all as per specified and directed by Engineer-in-Charge.
20
-
-
... More
Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) of size 150 Sqmm 3.5 Core & laid in trenches/pipes or fixed on pole Complete all as per specified and directed by Engineer-in-Charge.
280
-
-
... More
Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) of size 50 Sqmm 3.5 Core & laid in trenches/pipes or fixed on pole Complete all as per specified and directed by Engineer-in-Charge.
25
-
-
... More
Supply and installing testing and commissioning factory made (incl CPRI type test certified), LT feeder pillar box (KIOSK), outdoor type plate form mounted suitable for 415 volts 3 phase and netural suitable for 4 wire 50 Hz AC supply system having bus bar chamber with insulated Copper bus bar 600 Amps not less than 60 cm long rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, powder coated finish, front and rear opening type with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) lock with 2 keys, internal wiring with suitable size of copper strip from bus bar to MCCB and metering wiring with PVC insulated, stranded copper conductor, FRLS Cable, IS-694 marked of adequate size but not less than 4 sqmm with 45cm height from ground level with PCC foundatioin in 1:4: 8 type D-2 complete the following accessories :-( Praposed Main LT Panel). Incoming:- (a) MCCB 400 Amp 50 KA rating 4 Pole 440 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 01 Nos (b) Multifunction meter Class, 1.0, Three line Bakelite LCD Display with back sealing arrangement , with meter run hour & power on Hour, AVG , Max & total value of Active , reactive & apparent power & span shot of power ( KW) , current (I) , Voltage (V) & PF with programmable CT Ratio of -/5A along with Suitable size core CTs for current sensing (Make HPL , Cat Part No NEMFVIFPPE000 or equivalent of Make : L & T / Secure / Conserve.) (c) Indication lamp 22.5mm dia LED type 240 volts AC to show three phase availability-01Set. (d) Copper bus bar three phase 600 Amp- Set of 4 Nos. Outgoing:-(a) MCCB 160 Amp 36 KA rating 4 Pole 440 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 01 Nos - FOR -Praposed main Lt panel to LT panel no 1 (b) MCCB 125 Amp 25 KA rating 4 Pole 440 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 01 Nos -.
For-Praposed Lt panel to existing load (c) MCCB 100 Amp 16 KA rating 4 Pole 440 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 01 Nos (d) MCCB 63 Amp 16 KA rating 4 Pole 440 volts with megnatic setting and thermal release adjustable to 80 to 100 % - 01 Nos -
For-Praposed Lt panel to existig 777 boing Lt panel
1
-
-
... More
Supply and installing testing and commissioning factory made (incl CPRI type test certified), LT feeder pillar box (KIOSK), outdoor type plate form mounted suitable for 415 volts 3 phase and netural suitable for 4 wire 50 Hz AC supply system having bus bar chamber with insulated Copper bus bar 400 Amps not less than 60 cm long rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, powder coated finish, front and rear opening type with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) lock with 2 keys, internal wiring with suitable size of copper strip from bus bar to MCCB and metering wiring with PVC insulated, stranded copper conductor, FRLS Cable, IS-694 marked of adequate size but not less than 4 sqmm with 45cm height from ground level with PCC foundatioin in 1:4: 8 type D-2 complete the following accessories :-( Praposed LT Panel No 1). Incoming:-(a) MCCB 160 Amp 36 KA rating 4 Pole 440 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 01 Nos (b) Multifunction meter Class, 1.0, Three line Bakelite LCD Display with back sealing arrangement , with meter run hour & power on Hour, AVG , Max & total value of Active , reactive & apparent power & span shot of power ( KW) , current (I) , Voltage (V) & PF with programmable CT Ratio of -/5A along with Suitable size core CTs for current sensing (Make HPL , Cat Part No NEMFVIFPPE000 or equivalent of Make : L & T / Secure / Conserve.) (c) Indication lamp 22.5mm dia LED type 240 volts AC to show three phase availability-01Set.(d) Copper bus bar three phase 400 Amp- Set of 4 Nos.
Outgoing:-(a) MCCB 125 Amp 16 KA rating 4 Pole 415 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 01 Nos - For-Praposed Lt panel no 2 (b) MCCB 100 Amp 16 KA rating 4 Pole 415 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 01 Nos FOR- AC LOAD (c) MCCB 25 Amp 16 KA rating 4 Pole 415 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 01 Nos FOR-Light load (d) MCCB 100 Amp 16 KA rating 4 Pole 415 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 01 Nos -
1
-
-
... More
Supply and installing testing and commissioning factory made (incl CPRI type test certified), LT feeder pillar box (KIOSK), outdoor type plate form mounted suitable for 415 volts 3 phase and netural suitable for 4 wire 50 Hz AC supply system having bus bar chamber with insulated Copper bus bar 300 Amps not less than 60 cm long rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, powder coated finish, front and rear opening type with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) lock with 2 keys, internal wiring with suitable size of copper strip from bus bar to MCCB and metering wiring with PVC insulated, stranded copper conductor, FRLS Cable, IS-694 marked of adequate size but not less than 4 sqmm with 45cm height from ground level with PCC foundatioin in 1:4: 8 type D-2 complete the following accessories :-( Praposed LT Panel No 2 )
Incoming:-(a) MCCB 125 Amp 16 KA rating 4 Pole 440 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 01 Nos (b) Multifunction meter Class, 1.0, Three line Bakelite LCD Display with back sealing arrangement , with meter run hour & power on Hour, AVG , Max & total value of Active , reactive & apparent power & span shot of power ( KW) , current (I) , Voltage (V) & PF with programmable CT Ratio of -/5A along with Suitable size core CTs for current sensing (Make:- HPL , Cat Part No NEMFVIFPPE000 or equivalent of Make :- L&T / Secure / Conserve.) (c) Indication lamp 22.5mm dia LED type 240 volts AC to show three phase availability-01Set.(d) Copper bus bar three phase 300 Amp- Set of 4 Nos.
Outgoing:-(a) MCCB 63 Amp 16 KA rating 4 Pole 415 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 02 Nos -(1W+1S) for-UPS ROOM. (b) MCCB 40 Amp 16 KA rating 4 Pole 415 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 02 Nos -(1W+1S) For-CHILLER ROOM .(c) MCCB 25 Amp 16 KA rating 4 Pole 415 volts with megnatic setting and thermal release adjustable to 70 to 100 % - 01 Nos. For-SERVo motor.(c) MCCB 100 Amp 25 KA rating 4 Pole 415 volts with megnatic setting and thermal release adjustable to 70 to 100 % for harmonic filter - 01 Nos
1
-
-
... More
Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation etc or for laying of cables, pipes etc and getting out in soft/loose soil complete all as specified and as directed.
868
-
-
... More
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed by Engineer-in-Charge.
26
-
-
... More
Returning, filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick complete all as specified and as directed.
842
-
-
... More
M&L for tibba sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engineer-in-Charge.
19
-
-
... More
M&L for Stone patti 40 to 50 mm thick rough dressed Jodhpur stone slab cover in trenches for protection of cable 25 to 35 cm wide and not less then 60 cm in length laid dry abutting each other with gap between adjacent slab not excedding 10mm over sand cushioning complete all as specified and as directed.
68
-
-
... More
Supply and erecting for cable route marker for LT Cable made of precast RCC (1:2:4) using 20mm graded stone aggregate cast in pillar of size 15x10x60cm including reinforcement with 4 nos 10mm dia deframed bars of 55 cm length and link/strapps of 8mm dia bras at 150mm C/C and in fixing in ground level duly pained & written LT .433 KV including PCC & earth work complete all as specified and as directed.
11
-
-
... More
M&L for GI Tubes, of size 40mm bore, light grade ,galvanised , with clamp of 25x3 flat iron welded to pipe fixed to wall/pole/ceiling or laid in floors or under road etc complete all as specified and as directed.
1
-
-
... More
M&L for GI Tubes, of size 50mm bore, light grade ,galvanised , with clamp of 25x3 flat iron welded to pipe fixed to wall/pole/ceiling or laid in floors or under road etc complete all as specified and as directed.
2
-
-
... More
M&L for GI Tubes, of size 80mm bore, light grade ,galvanised , with clamp of 25x3 flat iron welded to pipe fixed to wall/pole/ceiling or laid in floors or under road etc complete all as specified and as directed.
21
-
-
... More
Boring of Holes under road,Pavement,hard,standing by trenchless technology using ultra sounding techanique and necessary machine including HDPE pipe of 300 mm dia for 0.4 mpa working pressure complete all as specified and as directed.
18
-
-
... More
M&L for PCC (1:3:6) type C1 using 20 mm graded aggregate for making good the disturbed portion of road/floor/platform etc including form work compaction etc all as specfied and directed by Engineer-in-Charge.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%