Military Engineer Services Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date3 Feb 2025
Closing Date3 Mar 2025
Tender Amount₹ 5,97,00,000
Costs
EMD
₹ 6,24,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_696151_1Tender No
84470/E8 CE BTZ/SGNR/TOKEN -22 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and removal from sitecomplete all as specified and as directed by Engineer-in- charge.
279
-
-
... More
Dismantling boarding any description fixed in any position with nails complete all as specified and as directed by Engineer-in- charge.
565
-
-
... More
Supply & fixing aluminium anodised frames/chowkhats, made out of aluminium section powder coated (minimum thickness of powder coating not less than 50 micron) for window, ventilators and aluminium partition with one or more rebates or without rebate including joining cleat for fixing etc., the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners. Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and as directed by Engineer-in-Charge.
Note :- The weight of each section shall be physically ascertained through a board of officers convened by GE and payment shall be made only after the actual weight at site.
6000
-
-
... More
Supply & fixing anodised aluminium window/ventilator shutter (glazed or gauzed), side and top hung type without sash bars, made out of aluminium section weighing not less than 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings (each shutter) such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No.), complete all as specified and as directed by Engineer-in-Charge.
Note :- Aluminium chowkhat/ frame, Glass and grill where required shall be measured and paid separately under appropriate item of BOQ.
691
-
-
... More
Supply & fixing aluminium Powder coated grill of approved design/pattern, with approved standard section and fixed to the window frames with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed by Engineer-in-Charge.
207
-
-
... More
Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
864
-
-
... More
Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge including supply and fixing following items :
(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf
(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 150 mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 nos. per leaf
223.2
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer- in-Charge including supply and fixing following items :
(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf
(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf
(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf
(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf
(e) Stainless Steel (304 Grade) Finished Floor Door Stopper - 1 nos. per leaf
752.4
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including S&F of stainless steel 304 Grade (natural finish) wire cloth complete all as per direction of Engineer- in-Charge including supply and fixing following items :
(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf
(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf
(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf
(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf
(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf
(f) Stainless Steel (304 Grade) wire cloth fixing as per manufacture
564.76
-
-
... More
Supply & fixing Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed including necessary beading etc complete all as per direction of Engineer- in-Charge
208
-
-
... More
Supply & fixing aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed (IS Marked) complete all as per direction of Engineer- in-Charge
258
-
-
... More
Supply & fixing block board, 19/20mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work as in Kitchen cup board Shutter / shelves / cabinet etc complete all as per direction of Engineer- in-Charge
565
-
-
... More
Supply & fixing 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive also on edges of cupboard shutter as per makers instructions complete all as per direction of Engineer- in-Charge
1130
-
-
... More
Supply & fixing second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as per direction of Engineer- in-Charge
2.19
-
-
... More
Material and labour for Cutting holes in brick walls exceeding half brick but not exceeding one brick built in cement mortar including making good dismantled portion in CM (1:3) and filled hole with cement concrete (1:2:4) type B-1 complete all as per direction of Engineer- in-Charge
720
-
-
... More
Supply & fixing Factory made prefabricated Pressed steel Door frame made out of mild steel 1.25mm thick girth of frame 185mm including necessary MS rawl plug/bolts and fixing 75mm long butt hinges medium weight cold rolled mild steel etc and shutter including stiffeners made out of mild steel sheet 1.25mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angle etc as required with locking arrangement using mild steel mortise lock 4 levers with 2 Nos of keys of size 100mm (Make Godrej/Harison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods out of 8 mm dia not exc 1000mm long fixed to mortise lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick complete including two coat of synthetic enamel paint over a shop coat of zinc chromate primer on interior surface (not -visible from front) and hammer tone paint on exterior surface ( visible from front) as per Godrej Pattern complete all as specified and as directed by Engineer-in-charge.
307.8
-
-
... More
Supply and fixing Magnetic catcher fixed with steel screw complete all as specified and as directed by Engineer-in-charge.
1080
-
-
... More
Supply & fixing Continuous (piano) hinges, stainless steel, bright finish, width of flap when open 30mm complete all as specified and as directed by Engineer-in-charge .
648
-
-
... More
Supply and fixing factory made powder coated pressed steel frames of size 125 x 60mm (thickness of sheet shall be 1.25mm) for doors with one or more rebates including necessary lugs and lock strike plate, etc. complete all as specified and as directed by Engineer-in- charge.
848.4
-
-
... More
Supply and fixing factory made powder coated pressed steel frames of size 105 x 60mm (thickness of sheet shall be 1.25mm) for doors with one or more rebates including necessary lugs and lock strike plate, etc. complete all as specified and as directed by Engineer-in- charge.
924
-
-
... More
Material and labour for PCC (1:3:6) type C-1, using 20 mm graded aggregated as in back filling of pressed steel door frame/chowkhat and bed block for fixing of hold fast complete all as specified and as directed by Engineer-in-Charge
16.45
-
-
... More
Supply and fixing stainless steel pipe 25mm bore (as a curtain rod), wall thickness of pipe not less than 1mm and grade SS 202, fixed in position with fixing accessories like Brackets, finial and side holder of same manufacturer complete all as specified and as directed by Engineer-in-Charge.
Note : (i) Brackets, finial and side holder shall be measured and paid separately for supply only but the cost for fixing the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
(ii) Cost for screws, rawl plugs as required for fixing shall also shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
1620
-
-
... More
Supply only stainless steel 202 grade brackets for fixing of 25mm bore curtain rods complete all as specified.
2160
-
-
... More
Supply only stainless steel 202 grade finials for fixing of 25mm bore curtain rods complete all as specified.
2160
-
-
... More
Supply only stainless steel 202 grade side holder for fixing of 25mm bore curtain rods complete all as specified.
2160
-
-
... More
Supply & fixing 4.8 mm thick sheet glass ordinary quality in squares / retangular not exceeding 0.5sqm in each pane (aluminium window/ventilator) complete all as specified and as directed by Engineer-in- charge. Note :- Cost for Aluminium fittings and rubber beading for securing the glass shall be included in main item of aluminium window/ventilator of BOQ.
275
-
-
... More
Supply & fixing, 4.8 mm thick figured glass pin head type in squares / retangular not exceeding 0.5sqm in each pane complete all as specified and as directed by Engineer-in- charge.
Note :- Cost for Aluminium fittings and rubber beading for securing the glass shall be included in main item of aluminium window/ventilator of BOQ.
55
-
-
... More
Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc. complete all as specified and as directed by Engineer-in-Charge.
2165
-
-
... More
Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area at any distance as direccted from the site complete all as specified and as directed by Engineer-in-Charge.
3530
-
-
... More
Material and labour for 7 to 8 mm thick non-skid ceramic colour (light shade) joint free tiles with matt finish premium quality having water absorption should be between 3% to 6%, square/ rectangular, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor, set and jointed using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 including necessary cutting as per site requirement, complete all as specified and directed by Engineer-in-Charge.
600
-
-
... More
Material and labour for Double charge vitrified coloured tiles (approved shade) of size 600mm x 600mm having thickness 8 to 9 mm premium quality having water absorption less than 0.08%, straight edge, stain free, glossy finish, square marbonite, laid as in floor, set and jointed using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, complete all as specified and directed by Engineer-in-Charge. Make : Johnson (Snow Flair/Albano White Plus/Albano Lemon Plus) or Techno commercial equivalent in make mentioned in Appendix 'B'
3160
-
-
... More
Ditto all as above item but as in skirting, but tiles laid over and including 10 mm thick bedding layer in cement mortar (1:3) complete all as specified and as directed by Engineer-in-Charge.
360
-
-
... More
Material and labour for Providing and Laying Premium (1st) quality having water absorption should be between 10% to 20%, digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 7 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
Note : Dado should be flushed with the wall plastering.
Make : Johnson (Digital HD Tiles) (Barstow DK/LT/HL for Toilets & Verona LT/HL for Kitchens) or Techno commercial equivalent in make mentioned in Appendix 'B'
2570
-
-
... More
Dismantling of stone slab tiling including cement mortar bedding ( but not backing) and including removing rubbish material from building and thrown in low lying empty area at any distance as direccted from the site complete all as specified and as directed by Engineer-in-Charge.
22.6
-
-
... More
Material and labour for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 20 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified and as directed by Engineer-in-Charge.
Note : Single piece should be used in steps/cills/jambs/shelves.
396.64
-
-
... More
Material and labour for machine cut 16 to 18 mm thick, Kota stone slab (size of slab not less than 500x550mm for flooring and in single piece for treads of staircase), laid over and including 20 mm thick bedding layer in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding (mirror finish) and polishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed by Engineer-in-Charge.
585
-
-
... More
Material and labour for machine cut 16-18mm thick, Kota stone slab as in skirting, dado and on pillar, laid over and including 10 mm thick bedding layer in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding (mirror finish ) and polishing by machine, including machine cutting to make it square or rectangular complete all as specified and as directed by Engineer-in-Charge.
195
-
-
... More
Material and labour for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, hard standing, path etc, laid in suitable panels not exceeding 3.00 m length finished even and smooth without using extra cement, 10mm Joints filled with bituminous sealing compound of grade ‘A’/bitumen mastic filler/sealant complete all as specified and directed by Engineer-in-Charge.
640
-
-
... More
Dismantling brick terracing tiles single layer from roof laid and pointed in cement mortar ncluding cleaning and stacking serviceable tiles for re use and balance unserviceable tiles removing from the site and deposit where directed complete all as specified and as directed by Engineer-in-charge.
2550
-
-
... More
Demolition/taking out of mud from roofs, any thickness, including removing / cutting uprooting grass, vegetations and roots of small plants etc on roof and surrounding/parapit wall etc, and including removing rubbish material from building and thrown in low lying empty area at any distance as direccted from the site complete all as specified and as directed by Engineer-in-Charge.
255
-
-
... More
Preparation of roof top surfaces, providing and applying UV stable single component smart care damp proof ultra is a fibel reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibres and having SRI of 106 on top of concrete roof surface in three coats including self-primer at ratio pf damp proof and water 3:1 and coverage @ 1 Ltr/10 Sqm with a thickness of 650 micron. Note : (i) 6 Hrs interval between two coats will be maintained.
(ii) The treatment shall be carried out by authorised applicator approved by CWE as per the manufacturer
(iii) Payment will be made after providing warranty certificate from the company.
2640
-
-
... More
Demolition of cement concrete and digging out (unreinforced) as in sunken floor of any description and in any position and including removing rubbish material from building and thrown in low lying empty area at any distance as directed from the site complete all as specified and as directed by Engineer-in-Charge.
110.11
-
-
... More
Material and labour for water proofing treatment to RCC sunken slab and adjoining vertical slab as described following any one method complete as per directions of GE.
179.33
-
-
... More
Method 1 (A) Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smart Care Damp proof 2K, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5 Clean all working surface & made free from dirt, grease laitance etc. After inspection for all working area rough surface, cracks & construction joint are treated by polymer modified mortar of 1:1:4 (1 Cement : 1Polymer : 4 Sand). Making Gola of size 75x75mm at junction of vertical & horizontal with the polymer modified mortar of 1:1:4 (1 Cement : 1 Polymer : 4 Sand). The coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc, complete as per manufactures specifications.
(B) Bore Packing: All the borehole gaps between concrete surface and PVC pipe of various dia upto the neck level shall be filled with non-shrink free flow grout – Smart Care GP Grout having dual shrinkage compensation property. Before the bore packing, surface of the PVC pie and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent.
(C) Apply12-15mm plaster on slab and vertical surface admixed with Smart Care Vitalia Neo @200ml per bag of cement before treatment.
-
-
-
... More
Method 2 (A) Supplying and applying two component cementitious & acrylic flexible water proofing & protective coating, two coats with 1mm DFT, having Hydrostatic (positive) water pressure resistance (DIN 1048) is 7. Abrasion resistance, cm/km is 0.09 of Dr Fixit Pidifin 2k @ 1.5kg/sqm with a paint brush over existing slab surface and adjoining vertical surface. The Polyester reinforced coated net of 45g/sqm, 2.5mmx2.5mm is laying on the surface immediately on the first coat of two component modified polymer Dr Fixit pidifin 2k. After removal of all lose materials like dust etc. with wire brush coir brushes from surface to get absolutely cleaned surface free of foreign contaminant filling of crack and patches with polymer based mortar/micro concrete, after that making the gola on surrounding wall’s junction and seal the vertical walls. In case of core cutting on the surface, the joint is seal with non-shrink grout.
(B) The coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls.
(C) Apply12-15mm water proof plaster on slab and vertical surface admixed with Dr Fixit pidiproof LW+ @200ml per bag of cement before treatment.
-
-
-
... More
Make : Method 1 (Asian paint)/ Method 2 (Dr fixit) or Techno commercial equivalent in make mentioned in Appx 'B' approved by CWE Note :- (i) The treatment shall be carried out by authorised applicator (through specialized agency ) approved by CWE as per the manufacturer.
(ii) PCC filling under sunken area will be measured & paid separately
-
-
-
... More
Material and labour for Applying Water proofing treatment on wall surface with first coat of chemical pidifin 2K (Dr Fixit) on cleaned surfaces @ 0.86 Kg/Sqm (Minimum) and drying for 24 Hours complete all as specified and as directed.
(a) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) over first coat
1371.6
-
-
... More
Material & Labour for PCC (1:5:10) type E2 using 40mm graded stone aggregate as filling of sunken floors complete all as specified and as directed by Engineer-in-charge.
22.62
-
-
... More
Material and labour for 25mm thick PCC in cement mortar (1:2:4) type B0 using 12.5mm graded stone aggregate the surface finished fair complete all as specified and directed by Engineer-in-Charge.
1579.55
-
-
... More
Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed by Engineer-in-charge.
1070
-
-
... More
Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed by Engineer-in-charge.
1440
-
-
... More
Supply & fixing of 16mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 fittings (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed.
1420
-
-
... More
Supply & fixing of 20mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 fittings (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed. NOTE FOR CPVC PIPES : (i) Pipes inside the buildings shall be fixed concealed and outside the buildings shall be fixed on the surface along wall with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, as directed by Engineer-in-Charge. (ii) Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.
1440
-
-
... More
Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection including dismantling/taking down old water storage tanks of any description and capicity with float valve and gate valve complete all as specified and as directed by Engineer-in-charge.
70
-
-
... More
Disconnecting existing serviceable PVC tanks (OHT) of capacity upto 500 litre, setting aside or lowering for repairs, cleaning , etc. and hoisting if required reconnecting and re-fixing in original position including all inlet and outlet water connection (as per existing) after removing all scale and dirt from tanks and from mouths of circulating pipes complete all as specified and as directed by Engineer-in-charge.
20
-
-
... More
Supply and fixing Ball brass valves, high pressure, with high density plastic ball (polythene float) fly nut complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed by Engineer-in-charge.
70
-
-
... More
Supply and fixing Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and as directed by Engineer-in-charge.
Make : Jaquar (Cat No. VGP-81053 (Vintage Prime)) or equivalent from Cera (Valentina Single Lever Series) or Techno commercial equivalent in make mentioned in Appendix 'B'
450
-
-
... More
Supply and fixing single liver basin mixer with popup waste system & 450mm long braided hoses, fency type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe complete all as specified and as directed by Engineer-in-charge.
Make : Jaquar (Cat No. VGP-81051B(Vintage Prime)) or Cera (Cat No - F1013451) or equivalent from Hindware (Fluid Series) or Techno commercial equivalent in make mentioned in Appendix 'B'
90
-
-
... More
Supply and fixing single lever sink mixer with swinging spout,with connecting legs & wall flanges, wall mounted, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and as directed by Engineer-in-charge.
Make : Jaquar (Cat No. VGP-81165 (Vintage Prime)) or Techno commercial equivalent in make mentioned in Appendix 'B'
90
-
-
... More
Supply and fixing single lever High concealed diverter flow consisting of exposed part kit with operating lever , wall flange & button and concealed body ,cartdge sleeve and also including bath spout with flange chromium plated ,screwed down, high pressure complete all as specified and as directed by Engineer-in-charge.
Make Cera:(exposed part F1018721, concealed part F4030101, bath Spout F1020661), Jaquar or Techno commercial equivalent in make mentioned in Appendix 'B'
90
-
-
... More
Supply and fixing stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 including bottle trap 32mm with 125mm & 175mm long with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed by Engineer-in-charge.
Make : Sink :- Nirali (Elegance) or Diamond (REK 3618) or Neelkanth
Make : Bottle Trap :- Hindware (F850015) or Techno commercial equivalent in make mentioned in Appendix 'B'
75
-
-
... More
Supply and fixing Plate Rack / Dish Rack of overall size 900mmx900mm, glossy finish made out of Food Grade Stainless Steel 1mm thick sheet/strip including necessary arrangements for plates and utencils to keep (Holds up to many plates or bowls To accommodate several place settings, Multipurpose), stylish modern streamline design, rust resistant, easy to assemble and clean including fitting accessories fixed in position as directed with SS screws/fasteners etc complete all as directed by Engineer-in-charge.
70
-
-
... More
Taking down carefully Kitchen Rack / sink and refixing after repair to building work including fixing/hanging material as required complete all as directed by Engineer-in-charge.
35
-
-
... More
Supply and fixing in repair vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer and incl. brass CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size complete all as directed by Engineer-in-charge.
Make : Hindware (WHB-Garnet (Cat No.- 10080), Waste Coupling-Cat No.- F850023 (Economy Model), Bottle Trap-Cat No.- F850072 (Economy Model) or Techno commercial equivalent in make mentioned in Appendix 'B'
90
-
-
... More
Supply and fixing vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic soft close seat cover as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.
Make : Jaquar (Continental Series-CNS-WHT-963N or Techno commercial equivalent in make mentioned in Appendix 'B'
90
-
-
... More
Supply and fixing health faucet (Hand Shower) fancy type, CP including 1.2 meter long 8mm dia wasy flex tube in chrome finish and including wall hook and fixing material, making connections and fixed in position complete all as specified and as directed by Engineer-in-charge. Make: Jaquar(continental series) ALD-573 / Hindware (contessa plus series)/ Cera (Ocean series) or Techno commercial equivalent in make mentioned in Appendix 'B'
990
-
-
... More
Supply and fixing concealed flushing cistern of PVC 8 ltr. cap with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl S&F of all necessary accessories/installation kit and 'S' type drain pipe connetion set for wall hung WC etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and and taking down existing of any description/size complete in all respect all as specified.
Make : Jaquar (Concealed Cistern-JCS-WHT-2400S, Flush Plate-JCP-CHR-812415) or Techno commercial equivalent in make mentioned in Appendix 'B'
90
-
-
... More
Supply and fixing Chromium plated overhead shower 100mm dia with shower arm of 300mm long 20mm dia round shape with 90º bend for wall mounted shower with flange of same make and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.
Make : Jaquar (Shower-OHS-1989, Shower Arm-SHA-479L450) or Techno commercial equivalent in make mentioned in Appendix 'B'
90
-
-
... More
Supply and fixing towel rail CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified and as directed by Engineer-in-charge. Make : Jaquar/Cera/Hindware/Marc/Prima
90
-
-
... More
Supply and fixing towel rail CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified and as directed by Engineer-in-charge. Make : Jaquar/Cera/Hindware/Marc/Prima
90
-
-
... More
Supply and fixing soap dish, stainless steel of suitable size to accommodate soap , tooth brush glass and tooth paste complete all as specified and as directed by Engineer-in-charge.
90
-
-
... More
Supply and fixing in repair 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-charge.
90
-
-
... More
Supply and fixing Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and as directed by Engineer-in-charge.
180
-
-
... More
Supply and fixing sheet glass shelf assembly of 300X300mm for corners consisting of 5.5 to 6mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and as directed by Engineer-in-Charge.
180
-
-
... More
Demolition and breaking up 150 mm internal dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and laid in trenches including all fittings and accessories complete as specified and as directed by Engineer-in- charge
90
-
-
... More
Supply and fixing 150mm dia (internal) Salt-glazed stoneware drain pipes laid in trenches and jointed as specified complete as specified and as directed by Engineer-in- charge
90
-
-
... More
Material and labour for PCC 1:3:6 type C-2, using 40mm graded stone aggregate as in Concrete bed to drain pipes including packing under, and haunching against the sides of 150 mm pipes after they are laid and tested complete as specified and as directed by Engineer-in- charge
84
-
-
... More
Material and labour for Cutting into existing manholes for connecting new drains 150 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete as specified and as directed by Engineer-in- charge
45
-
-
... More
Taking down any type of soil waste, vent pipe, rain water pipes (PVC/CI/AC any size or pattern) including all fittings, heads, shoes, bends, swan-neck etc complete as specified and as directed by Engineer-in- charge
1164
-
-
... More
Supply & fixing 110mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant complete all as specified and as directed by Engineer-in- charge.
Note:- Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.
594
-
-
... More
Supply & fixing 75mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant complete all as specified and as directed by Engineer-in- charge.
Note:- Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.
200
-
-
... More
Supply & fixing 110mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, laid in trenches, joints fixed with pipe joint lubricant complete all as specified and as directed by Engineer-in- charge.
300
-
-
... More
Supply & fixing 75mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, laid in trenches, joints fixed with pipe joint lubricant complete all as specified and as directed by Engineer-in- charge.
70
-
-
... More
Supply & fixing uPVC bends (any radius) grade 'B' suitable for 110mm bore pipe complete all as specified and as directed by Engineer-in- charge.
315
-
-
... More
Supply & fixing uPVC bends (any radius) grade 'B' suitable for 75mm bore pipe complete all as specified and as directed by Engineer-in- charge.
225
-
-
... More
Supply & fixing uPVC junction (double T/socket) grade 'B' equal or unequal suitable for 110mm bore pipe complete all as specified and as directed by Engineer-in- charge.
90
-
-
... More
Supply & fixing uPVC junction (double T/socket) grade 'B' equal or unequal suitable for 75mm bore pipe complete all as specified and as directed by Engineer-in- charge.
90
-
-
... More
Supply & fixing PVC 110 mm bore (SWR) 'P’ trap complete all as specified and as directed by Engineer-in- charge.
180
-
-
... More
Supply & fixing PVC (SWR) gully trap 125 X 125 mm, setting and jointing with solvent cement complete all as specified and as directed by Engineer-in- charge.
45
-
-
... More
Supply & fixing uPVC vent cowl grade 'B' suitable for 75mm bore pipe complete all as specified and as directed by Engineer-in- charge.
90
-
-
... More
Taking down cement plaster from brick walls/soffits of roof projections & chajjas /ceilings etc. including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
14710
-
-
... More
Material and labour for internal plastering 15mm thick in cement mortar (1:6) on any face of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed by the Engineer-in-Charge.
5940
-
-
... More
Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick wall or concrete surfaces, finished even and fair including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, where directed complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately as Supply only)
7010
-
-
... More
Material and labour for rendering 5mm thick in cement mortar (1:3) onconcrete surface of ceiling, finished fair, even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
2670
-
-
... More
Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge.
886.12
-
-
... More
Dismantling of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site and deposit where directed complete all as specified and as directed by Engineer-in-charge.
61.05
-
-
... More
Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.
61.05
-
-
... More
Material and labour for brick work in half brick thick wall straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge.
340
-
-
... More
Material and labour for PCC ( 1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge.
155
-
-
... More
Material and labour for PCC (1:2:4), type B-0 using 20 mm graded stone aggregate using WPC as per manufacturer's instruction as in benching / Roof Kerbing along side wall adjoining to roof in concave shape complete all as specified and directed. Note : WPC shall be measured and paid separately.
17
-
-
... More
Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed by engineer in charge
2550
-
-
... More
Material and labour for 75mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed by Engineer-in-charge.
840
-
-
... More
Supply and laying/fixing 60mm thick factory made chamfered edge cement concrete paver block/ interlocking tile of M-35 grade, prepolished & preglazed, with approved colour, design & pattern (laid in required colour & pattern as directed) as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed by Engineer-in-Charge.
840
-
-
... More
Supply and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.
27.5
-
-
... More
Demolition of cement concrete reinforced of any description such as roof slab, slab, beam, staircase, landing chajja, OHT staging, fins, shelves, etc, including reinforcement cut as required to facilitate demolition and prepare the surface to casting/jointing new including removing rubbish material from building and thrown in low lying empty area at any distance from the site complete all as specified and as directed by Engineer-in-Charge
97.37
-
-
... More
Material and labour for reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ.
12.6
-
-
... More
Material and labour for reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ.
71.81
-
-
... More
Material and labour for reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate as in chajja complete all as specified and as directed by Engineer-in-Charge.
(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ.
6.48
-
-
... More
Material and labour for Precast reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in slabs or cover slab for manhole/kitchen sink slab in size as required including form work complete all as specified and as directed by Engineer - in - Charge.
(NOTE : Reinforcement shall be measured and paid for separately under appropriate item of BOQ.
5
-
-
... More
Material and labour for mild steel TMT bars 10mm dia & over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
7289
-
-
... More
Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge.
(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose)
1452.34
-
-
... More
Material and labour for welding in repairs Thickness of metal to be welded will be Exc 9 mm but not exc 20mm complete all as specified and directed by Engineer - in - Charge
80
-
-
... More
Form work to soffits of suspended slabs such as flat roof slabs, floor slabs, shelf slab, landings and similar work not exceeding 200mm thick (horizontal or sloping) rough finished complete all as specified and as directed by Engineer-in- charge.
700
-
-
... More
Form work to chullah hoods, chajjas, troughs and similar items including edges rough finished complete all as specified and as directed by Engineer-in- charge.
80
-
-
... More
Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished complete all as specified and as directed by Engineer-in- charge.
120
-
-
... More
Material and labour for Chipping of slab/columns/beams/chajjas/parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minimum of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brushes etc and disposal of debris for all lead and lifts, complete all as specified and directed
600
-
-
... More
Material and labour for Cleaning & applying rust remover in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 6-8 sq. mtr/ltr not less than 50 microns dft with Sika friazinc R or equivalent to reinforcement surface as per manufacturer’s instructions including all scaffolding, machinery, tools tackles and clearing of debris complete all as specified and as directed by Engineer-in-Charge. Make:- Mentioned in Appx 'B'
900
-
-
... More
Material and labour for Shear Connectors by drilling 12mm dia holes up to a depth of 75mm maximum and fixing 8mm dia L shaped anchor rods as shear connectors at every 300mm c/c on the surfaces of the columns/beams/slab or any other structural member as the case may be. Clean the same using air or blower and make sure that there are no fine particles present in the hole and filled the holes with one or two component styrene free vinyl ester resin anchor or two components, styrene & cement free epoxy- acrylate fixing and anchoring compound. At this stage push the shear connector gently in to the hole and finish the excess resin which comes out of the hole and allow the shear connectors not to be disturbed for Minimum 20 minutes complete all as specified and as directed by Engineer-in-Charge. Make:- Mentioned in Appx 'B'
300
-
-
... More
S & F of new steel or rebar’s by drilling holes with 10 mm to 20mm dia and 100 to 200mm deep as per IS code of 10D formula and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with one or two component styrene free vinyl ester resin anchor or two components, styrene & cement free epoxy acrylate fixing and anchoring compound (having the technical parameters mentioned in material specifications) using standard sealant applicator gun after drilling holes of required diameter at required locations, for holding / fixing / placing in position the steel mesh reinforcement at desired level/ stretching complete all as specified and as directed by Engineer-in-Charge. Make:- Mentioned in Appx 'B'
(Note : Steel/reinforcement shall be paid and measured separately).
280
-
-
... More
Material and labour for providing pourable, shrinkage compensated, free flowing and self-compacting superior performance micro concrete Sikacrete 145IN factory design with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate maximum 15% of bag to be added at site as per manufacturer instruction. Product should strictly meet the requirement of Compressive strength @28 days ~50 N/mm2 (ASTM C109)/ Flexural strength @28 days ~7 N/mm2 and Tensile adhesion strength @≥ 2 N/mm2 (28 days, +30 °C) (EN 1542) or as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine Including necessary formwork , Shuttering and jacating etc all as specified and directed. Make:- Mentioned in Appx 'B'
15
-
-
... More
Material and labour for applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified mortar or micro concrete with two coats of Sika-Latex Super SBR or equivalent as per manufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete Make:- Mentioned in Appx 'B'
300
-
-
... More
Material and labour for applying to the damaged concrete portion of slab/ columns/ beams/ chajjas/ parapet / roof projection/ balcony/ staircase with single component, fiber reinforced, dual shrinkage- compensated thixotropic, cementitious ptch repair mortar Sika monotop 122F (having the technical parameters mentioned in material specifications) capable of applying up to 20-25mm thick in double layer initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thickness. Make:- Mentioned in Appx 'B'
300
-
-
... More
Material and labour for Drilling Holes of 12mm dia up to 100 mm deep holes in structural members at the interval of 300 mm in staggered manner or along the crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc. complete all as specified and as directed by Engineer-in-charge.
2160
-
-
... More
Material and labour for Grouting, injecting two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout having following properties:- (i) Mixed Density 1.1 kg/l (at +27°C); Viscosity ~ 250 mPas at +30°C and should comply according to ASTM C 881, Type II and IV, Grade-1, Class E+F (ii) Compressive strength = 70 N/sqmm (7 days) according to ASTM C 579; Tensile Strength ~ 50 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); Tensile Modulus ~ 2000 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); (iii) Bond Strength ~ 10.8 N/sqmm (failure in concrete) after 14 days at +30°C cure; Flexural strength ~ 50 N/sqmm according to ISO 178. (iv) Seal the nozzle with thixotropic epoxy adhesive after the refusal of grout material from the nozzle. Note:- leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as specified and as directed by Engineer-in-charge.
Note :- Mode of measurement: per kg of material consumed
216
-
-
... More
Material and labour for mild steel Framed work such as grills, ladder, cooler stand, as door frame, hand wash basin, cloth drying provision, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work including welding work as required conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in- charge.
9170
-
-
... More
Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of red oxide primer with using paint brush complete all as specified and as directed by Engineer-in- charge.
1161
-
-
... More
Material and labour for preparation of new steel and iron surfaces of any description not otherwise described not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of red oxide primer with using paint brush complete all as specified and as directed by Engineer-in- charge.
605
-
-
... More
Material and labour for Preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of pink primer with using paint brush complete all as specified and as directed by Engineer-in- charge.
903.61
-
-
... More
Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth by complete removal of existing treatment and cleaning the dust and removing all loose particle & applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of red oxide primer with using paint brush complete as specified and as directed by Engineer-in-Charge.
540
-
-
... More
Material and labour for complete removal of existing treatment of any type/description from external/internal wall/ceiling surfaces, soffits/chajja/roof projection surfaces etc., by Mechanical sander/grinder machine having suction vaccum Bag (Smart periodical methodology), complete all as specified and as directed by Engineer-in- charge.
12620
-
-
... More
Material and labour for new plastered surfaces and prepared surface after complete removal, applying acrylic wall putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.
25570
-
-
... More
Material and labour for Preparation and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using spray gun to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion and primer brands complete all as specified and directed.
16150
-
-
... More
Material and labour for Preparation and applying 02 coats of exterior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using spray gun to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion and primer brands complete all as specified and directed.
9420
-
-
... More
Material and labour for Preparation of new/existing plastered surfaces as in ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.
4670
-
-
... More
Material and labour for Obliterating old writing of any description, not exceeding 0.1 sqm, with paint to match existing work etc complete all as specified and directed by Engineer - in - Charge.
101
-
-
... More
Material and labour for for Writing letters or figures with fluorecent paint ( Block. Roman, Italic or Indian) not exceeding 30 cm high etc complete all as specified and directed by Engineer - in - Charge
51
-
-
... More
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cess pits, manholes, not exceeding 10 Sqm on plan and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed by Engineer-in-charge.
601.2
-
-
... More
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
407.2
-
-
... More
Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge.
194
-
-
... More
Dismantling/taking up or down GI pipe of size 20/25/50mm bore including fittings from wall, ceiling/roof, floor, trenches etc and deposited at MES AGE store complete all as directed by Engr-in-Charge.
Note : (i) Excavation and Earth work if required shall be measured and paid separetly under respective item of BOQ.
1320
-
-
... More
Dismantling/taking down gate valve any type and size and deposited at MES AGE store complete all as directed by Engr-in-Charge.
90
-
-
... More
Supply, laying, jointing and testing of galvanized steel water tubing 50 mm bore ISI marked medium grade including fittings Viz Tees, Socket, bends, elbows, union nipple etc screwed and socketed joint laid in trenches /under road/floor etc including cutting and threading of pipe as required complete all as specified and as directed by Engineer-in- charge.
(Note:- Excavation and Earth work shall be measured and paid separately under respective item of BOQ)
600
-
-
... More
Supply, laying, jointing and testing of galvanized steel water tubing 25 mm bore ISI marked medium grade including fittings Viz Tees, Socket, bends, elbows, union nipple etc screwed and socketed joint laid in trenches /under road/floor etc including cutting and threading of pipe as required complete all as specified and as directed by Engineer-in- charge.
(Note:- Excavation and Earth work shall be measured and paid separately under respective item of BOQ)
60
-
-
... More
Supply, laying, jointing and testing of galvanized steel water tubing 25 mm bore ISI marked medium grade including fittings Viz Tees, Socket, bends, elbows, union nipple etc screwed and socketed joint, fixed along walls as shown in drawing, complete all as specified and as directed by Engineer-in- charge.
400
-
-
... More
Supply, laying, jointing and testing of galvanized steel water tubing 20 mm bore ISI marked medium grade including fittings Viz Tees, Socket, bends, elbows, union nipple etc screwed and socketed joint, fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolt as shown in drawing, complete all as specified and as directed by Engineer-in- charge.
Note:- Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.
30
-
-
... More
Re-fixing old serviceable 20mm bore galvanised steel water tubing (GI Pipe shall be reused after necessary cleaning internally and rerunning the old screw threads as required.) but with new fittings like elbow, tee, union, socket, reducer etc. in new or old portion/position to walls, ceiling, floor, fixed along walls as shown in drawing, complete all as specified and as directed by Engineer-in- charge. NOTE FOR GI PIPES : (i) Pipes inside the buildings shall be fixed concealed and outside the buildings shall be fixed on the surface along wall with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, as directed by Engineer-in-Charge. (ii) Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.
230
-
-
... More
Supply and fixing gun metal, globe or gate valve (ISI marked), with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
40
-
-
... More
Re-fixing gun metal, globe or gate valve (ISI marked), with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
50
-
-
... More
Supply and fixing PVC connection 15 mm size of length 450 mm with brass nuts of approved quality complete all as specified and as directed by Engineer-in-charge.
450
-
-
... More
Supply and fixing PVC connection 15 mm size of length 450 mm with PTMT nuts of approved quality complete all as specified and as directed by Engineer-in-charge.
450
-
-
... More
Supply and fixing 25 mm dia CPVC, globe or gate valve (ISI marked), screwed both ends suitable for 50mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
180
-
-
... More
Material and labour for Cutting of existing GI pipe 25mm bore forfor alterations or additions including screwing/threading and jointing with suitable size GI socket complete all as specified and as directed by Engineer-in-Charge.
23
-
-
... More
Taking down carefully existing copper/aluminium point wiring (light/fan/sockets/bell/power point) complete with all accessories such as switch socket with sheet, ceiling rose, lamp holder including rusted/broken concealed conduit, junction and sunken boxes etc and making good disturbed surface of walls/floors etc complete all as specified and as directed by Engineer-in-Charge.
Note:- All material obtain from taking down shall be deposited at MES AGE store.
1612
-
-
... More
Material and labour for concealed Point wiring for one light point/fan point controlled by one switch (using red, black and green colour wires as colour coding i.e for phase, netural, earth wire etc) complete with single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) i.e. three run 2.5 Sqmm (nominal cross section area) cable from DB to switch board as a incoming circcuit (phase, netural and earth wire) and 1.5 Sqmm (nominal cross section area) cable from switch board to ceiling rose for each outgoing connection for light point/fan point etc. along with 1.5sqmm (nominal cross section area) continues as earth wire cable drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size) concealed in wall, including inner and outer plates (cover plate white colour, any module as per requirements) suitable for fixing the modular switches/ socket / regulator etc, including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) including fixing of switch/socket/regulator etc complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).
Note:- (i) Where ever it is not feasible to cable drawn through existing PVC conduit in roof slab (for ceiling fan point only) due to blocked, casing caping in lieu of pipe shall be provided by contractor without any extra cost, cost for the same shall deemed to be included in the quoted unit rate.
1729
-
-
... More
Material and labour for making the connection to one socket out let 5 Amps point controlled by one switch (on same switch board i.e. as per above srl item No 154 with 2.5 Sqmm cable piece) complete all as specified and as directed by Engineer-in-charge. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate).
200
-
-
... More
Material and labour for concealed Point wiring for one light point/bell point (where socket point not required on same board or where single light/bell point required in one board) controlled by one switch (using red, black and green colour wires as colour coding i.e for phase, netural, earth wire etc) complete with single core FRLSH PVC insulated unsheathed, multi strand copper conductor cable 1100 volt (ISI marked) 1.5 Sqmm (nominal cross section area) cables for pahse, netural and for continues as earth wire drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size) concealed in wall, including inner and outer plates (cover plate white colour, any module as per requirements) suitable for fixing the modular switches/ socket / regulator etc, including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) including fixing of switch/socket etc complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).
90
-
-
... More
Material and labour for concealed Point wiring for one socket out let 5/6 Amps point controlled by one switch (on independant board) (using red, black and green colour wires as colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switche / socket, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switch, socket complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate).
450
-
-
... More
Material and labour for concealed Point wiring for one socket out let 15/16 Amps point controlled by one switch/AC starter switch (on independant board) (using red, black and green colour wires as colour coding i.e for phase, netural, earth wire etc) complete with 4 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 25mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches / socket/AC starter switch, including provn of 4 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switch, socket complete all as specified and as directed. (switch, AC starter switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate).
360
-
-
... More
Material and labour for concealed Point wiring for one light point controlled by two Nos- two way switch (using red, black and green colour wires as colour coding i.e for phase, netural etc) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switch, including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switches complete all as specified and as directed. (switches shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).
203
-
-
... More
Material and labour for concealed Point wiring for one Metal clad plug and socket out let 15/16 Amps point (on independant board) (using red, black and green colour wires as colour coding i.e for phase, netural, earth wire etc) complete with 4 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 25mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including provn of 4 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. (Metal clad plug and socket with MCB shall be measured and paid separately under appropriate item of BOQ ).
90
-
-
... More
Supply only modular switch 6Amps, piano flush type, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.
2379
-
-
... More
Supply only modular switch 6Amps, piano flush type, single pole, two way complete all as specified and as directed by Engineer-in-charge.
406
-
-
... More
Supply only modular switch 16Amps, piano flush type, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.
360
-
-
... More
Supply only modular Bell Push switch, 6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.
90
-
-
... More
Supply only modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.
650
-
-
... More
Supply only modular Socket outlet multipurpose type 16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.
360
-
-
... More
Supply and fixing Ceiling Rose, polycarbonate, isolated body, surface bakelite 3 terminal, 240 volts, 5/6 Amp complete all as specified and as directed.
953
-
-
... More
Supply and fixing electric calling Bell Ding Dong type, AC 230 Volts single pole including making elctric connection complete all as specified and as directed by Engr-in-charge.
90
-
-
... More
Supply and fixing modular fan step regulator, 120W - 2 module complete all as specified and as directed by Engr-in-charge.
280
-
-
... More
Supply and fixing industrial socket metal clad plug and socket with MCB single pole 20 amps complete all as specified and as directed by Engr-in-charge.
90
-
-
... More
Supply and fixing lamp holder (ISI marked) polycarbonate cased body (B22 base), top line series, with back plate, 6Amps, complete all as specified and directed by Engineer-in-Charge.
866
-
-
... More
Supply and fixing LED lamp minimum 3 star rated 9W LED B-22 base complete all as specified and directed by Engr-in-Charge with following specifications
(a) Lumen system efficacy of lamp should be minimum 100 Lumen per watt.
(b) Input Voltage range : 140 to 270 volts
(c) Temp operating range : Minus 10°C to Plus 45°C
(d) Power factor : Minimum 0.95
(e) CRI : Morethan 80
866
-
-
... More
Supply and fixing MCB ‘C’ curve suitable for 240 volts AC supply, 06 to 32 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB/panel complete all as specified and as directed by Engineer-in-charge
90
-
-
... More
Supply and fixing MCB ‘B’ curve suitable for 240 volts AC supply, 06 to 32 Amps, SP with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge
653
-
-
... More
Supply and fixing MCCB 63 Amps, Four pole, adjustable thermal magnetic protection, 16 KA, 415 V AC supply fixing in DB/panel complete all as specified and as directed by Engineer-in-charge
23
-
-
... More
Supply and fixing sheet metal enclosure double door 08 way SPN 230 V ISI marked IP 43 complete with neutral and earth link and bus bar complete made out of CRCA steel sheet factory made complete all as specified and as directed by Engineer-in-charge
90
-
-
... More
Supply and fixing sheet metal enclosure double door vertical DB made out of CRCA mild steel sheet surface with insulated material like polyster with epoxy powder coated surface mounting VTPN 04 way 415 Volts ISI marked 250 Amps bus bar stove enameled dust and vermin proof IP 43 protection suitable for incorporation FP MCCB N1 frame upto 125 Amps, isolators and including connections with wire and cable complete all as specified and as directed by Engineer-in-charge
23
-
-
... More
Taking down carefully existing LED tubelight of any size, and refixing the same after carrying out cleaning all the components of fitting including replacement of bolts, nuts and connection with flexible cable copper conductor twin core of size 23/0.2 mm upto ceiling rose/connector complete all as specified and as directed by Engineer-in-charge
50
-
-
... More
Material and labour for concealed sub main wiring (Two run for main i.e. phase and netural and one run for continues as earth wire connected to earth dolly etc., using red, black and green colour wires as colour coding) with 6 Sqmm single core, FRLSH PVC insulated multistrand copper conductor drawn through and including PVC conduit 25mm dia (medium quality ISI marked), on independent circuit from panel/DB including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal/junction box, tee, bend etc. and including cutting of chases in wall, complete all as specified and as directed by Engineer-in-charge.
Note :-Three run of 6 sqmm copper wire and one run conduit shall be measured as one RM length for payment but extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.
581
-
-
... More
Supply and fixing LED tube light fitting polycarbonate housing 1 x 18/20 Watt, appx 4 feet long, housing environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) LED Driver of the same make as of the luminaire. (h) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6000K (l) CRI : Minimum 80 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)
330
-
-
... More
Supply and fixing LED light fitting 1 x 8/10 Watt, appx 2 feet long LED lighting fixture with extruded polycarbonate environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) CRCA pre coated housing with plastic end cap. (h) LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection minimum 2.5 kV. (l) CCT : Minimum 6000K (m) CRI : Minimum 80 (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)
90
-
-
... More
Supply and fixing LED Bulkhead fitting 1 x 9/10 Watt, complete with Standard LED lighting fixture with extruded polycarbonate housing, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting with all accessories and following specifications complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 5°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-65. (g) CCT : Minimum 5700K (h) Polycarbonate housing white coloured (j) LED Driver of the same make as of the luminaire. (k) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection minimum 2.5 kV. (m) CRI : Minimum 80 (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)
113
-
-
... More
Supply and fixing energy efficient LED security light fitting of 25 W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5 Sqmm, fixing the light fitting with new bracket made out of GI tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket along wall including painting to bracket, MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, including taking down old unserviceable light fitting any type complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Minimum 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)
Make Bajaj Cat part No ENXT P30L WHCRPCSD or Techno commercial equivalent in make mentioned in Appx 'B'
23
-
-
... More
Supply and hanging /fixing ceiling fan 1200 mm sweep color white AC Supply (Input Voltage Range ; 120 to 280V), BLDC type, 5 star rated, BEE and ISI Marked super enamelled, copper winding of 'B' class insulation, single phase, minimum 30W (± 10%), Temperature rise 40 degree maximum with remote and remote holder (remote holder fixed on wall where directed), 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable size from ceiling rose to fan complete all as specified. Note :- (i) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account
90
-
-
... More
Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50 Cycle per second, size 300mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement. including electric connection with and including new 1 Sqmm, 2 core flexible copper conductor cable from ceiling rose to fan, (not exceeding 0.5 mtr long), and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. Note :- Serial Number of exhaust fan issued by Engr-In-Charge and GE Office name shall also be written on fan with red colour permanent marker.
90
-
-
... More
Supply and fixing ventilating Air fresher Fan of size 250mm sweep, single phase, 1200RPM, copper winding, made of sturdy Engineering plastic complete with louvers shutter, including provision of cutting of wall for suitable opening as per fan and making good the disturbed surface as per existing, including electric connection with and including new 1 Sqmm, 2 core flexible copper conductor cable from ceiling rose to fan, complete all as specified and as directed by Engineer-in-charge.
90
-
-
... More
Disconnecting electric connection and taking down carefully serviceable ceiling fans and deposited to E/M store yard. After the building repair work or as directed collect the ceiling fan from AGE E/M store for oiling/normal servicing and painting the ceiling fan complete body with blades, canopies, down rod etc. with synthetic enamel paint by spray gun after scraping down old paint in colour as directed including in replacement new nut bolts, rubber reel, capacitor 2.5mfd, machine screws and split pins, canopies etc. After painting refixing /hanging on site including electric connection with and including new 3core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2 mm from ceiling rose/connector to fan connector, complete all as specified and as directed by Engineer-in-charge. Note :- Serial Number of celing fan issued by Engr-In-Charge and GE Office name shall also be written on fan with red colour permanent marker.
190
-
-
... More
Supply, installing, commissioning and testing of electric water heater (Geyser, vertical type) storage type ABS body of capacity 25 litre with 2kw heating element, BEE approved 5 Star rating, 230 V, single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as having indicating light, safety valve, thermostat, NRV, connection piece PVC connection 600mm long heavy duty suitable for Hot and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable and making connections with and including 15 amp top plug, 04 Nos suitable size mild steel L-Hook fastener with washer for hanging the geyser and making good the disturbed surface complete all as specified and directed by Engr-in-Charge. Note (a) Contractor shall submit original purchase voucher and warranty card as recommended by manufacturer. (b) Serial Number of geyser issued by Engr-In-Charge and GE Office name shall also be written on geyser with red colour permanent marker or paint, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
90
-
-
... More
Supply and fixing GI box flush mounted 100mm x 100 mm x 100 mm having holes for 20 mm conduit entry including 2 pin TV socket outlet flush type duly marked with symbol of TV and 3 mm thick plastic laminated sheet cover complete for TV connection complete all as specified and as directed by Engineer-in-charge.
100
-
-
... More
Supply and fixing rigid non metallic PVC conduit 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks complete all as specified and as directed by Engineer-in-charge.
550
-
-
... More
Supply and laying in repairs XLPE LT Cable of size 25 Sqmm, 4 core, 1100 Volt grade heavy duty with XLPE insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS- 7098 (Part-I) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed by Engineer-in-charge. Note :- (i) Excavation, earth work, sand cushioning, protection cover, cutting of road and protection pipe shall be measured & paid separately under respective item of Schedule/BOQ.)
200
-
-
... More
Supply and laying in repairs XLPE LT Cable of size 16 Sqmm, 4 core, 1100 Volt grade heavy duty with XLPE insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS- 7098 (Part-I) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed by Engineer-in-charge. Note :- (i) Excavation, earth work, sand cushioning, protection cover, cutting of road and protection pipe shall be measured & paid separately under respective item of Schedule/BOQ.)
1410
-
-
... More
Supplying and laying Factory made un-reinforced precast concrete cable cover ISI marked, class LV, type I, flat, size 250mm x 150mm x 40mm complete all as specified and as directed.
9730
-
-
... More
Supply and fixing GI tubing light grade of size 50 mm bore, ISI marked, fixed along poles/walls or laid in trenches, under road, inserting in bore hole for cable protection including fittings (elbow, tee, socket etc) complete all as specified and as directed.
(Note:- Excavation and earthwork as required shall be measured and paid separately under respective item of Sch.)
18
-
-
... More
Sand cushioning, with dry and clean tibba sand (for under ground cable) 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and as directed. Note:- (i) Punned thickness shall be considered for payment purpose (ii) Approved sand free from vegetations, grass and other deleterious substances shall be used.
117
-
-
... More
Boring of holes under road, pavement, hardstanding by using trenchless boring machine or by manual manpower suitable for inserting GI pipe any dia upto 50mm including removal of surplus soil and making good disturbed surface complete all as specified and as directed.
NOTE:- Pipe for inserting as required shall be measured and paid for separately.
10
-
-
... More
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing wire 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI medium grade pipe upto test point or upto main switch board, fixing with 02 Nos nuts and bolts. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) including taking out/dismantling old unserviceable earthing system and old material deposited at MES AGE store complete all as specified and as directed by Engineer-in-charge.
Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
46
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%