Military Engineer Services Tender

Lump sum price worked out for Excavation & Earthwork as listed in Sch `A’ Part II

Lump sum price worked out for Internal Electrification as listed in Sch `A’ Part III

Lump sum price worked out for Road/Path/Hard Standing as listed in Sch `A’ Part IV

Lump sum price worked out for External Electric Supply as listed in Sch `A’ Part V

SCHEDULE `A' PART-VI MISCELLANEOUS ITEMS OF WORK (Note for items 06 to 10: The contractor shall quote his rate for each of these items separately. The estimated rate is left blank since the same is not prepriced by MES)

Supply and Fixing Air Circulator fans 230 Volts single phase oscillating 750mm sweep with metallic body and blades including clamps/nuts & bolts for fixing arrangements on steel pillars of hanger complete all as specified and directed

Supply and Fixing metal plug and socket with DBs consisting 8 module suitable for fixing MCB four pole 32A & RCBO 4 pole 3P+N+E complete all as specified

Supply and Fixing LED highbay light 100 watt 230V AC indoor type round in shape with multiple optices and equipped with IP-66 protection, with impact and corrosion resistant complete with driver , lamp, clamp and connected accessories complete all as specified and directed

Supply and Laying sand cusioning of tibba sand for XLPE cable with screened and washed sand and punning to provide as required cover complete all as specified and directed Note : Punned thickness shall be considered in measurement of payment

Supply & install testing and commissioning cuibical type dust and vermin proof IP 66 outdoor LT panel with ribbed type external surface, made of high quality CRCA 3.15mm characterised duly powder coated incl MS flat iron clamp/angle iron of size 40x40x6mm with nut, bolt washer etc shall be provided if required at site and mounted on suitable PCC plateform made of PCC 1:3:6 type C2 with 40 mm graded stone aggregate including 250 Amps Aluminium Bus bar 4 pole with below metioned items, lifting 4 hook should be provided at top of panel, complete all as specified and as directed :- (a) Bus bar of aluminium strips of 250 Amps current rating capacity, length as actually required at site for 3 phase and half size for netural, mounted on epoxy/FRP bus bar insulator 01 Set . INCOMING : (a) MCCB 125 Amps TPN 16 KA, 415 V Thermal meganetic release type- 01 Nos. (b) Multifunction meter digital type for reading of voltage, current and power factor- 01 Nos (c) LED type indicator lamp Red/Yellow/Blue colour- 03 Nos OUTGOING : (a) MCCB 40A Amps TPN 16 KA 415 Volts thermal megnetic release type -03 Nos (b) MCB DP 32A 220V for outgoing-02 Nos (c) All outgoing feeder should be connected with suitable size of bus bar and internal wiring with copper conductor incl necessary lugs and thimbles