Military Engineer Services Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date3 Feb 2025
Closing Date24 Feb 2025
Tender Amount₹ 48,17,000
Costs
EMD
₹ 96,340Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_696289_1Tender No
CA NO CWE SGNR T-95 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in same opening after necessary easing, adjustments, minor repairs, oiling, adjustment with cutting or fixing plain fillets/planks made from second class hard wood etc to remove gap between floor and shutter complete all as specified and as directed by Engineer-in- charge.
70
-
-
... More
S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., size of frame 125x60mm(1.25mm thick sheet ) and also 50mm (02 Nos) butt hinges for door cleat ISI marked and making good wall with plaster complete all as specified and directed by Engineer-in-charge.
90
-
-
... More
S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., size of frame 105x60mm"(1.25mm thick sheet) and also 50mm (01 No) butt hinges for door cleat ISI marked and making good wall with plaster complete all as specified and directed by Engineer-in-charge.
90
-
-
... More
M&L PCC 1:3:6, type C-1, using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed.
0.5
-
-
... More
S&F 40 mm thick factory made flush shutter Plain, framed, solid core construction with block board core and plywood face panels, commerical type on both sides covered with mica on both sides complete all as specified and directed by Engineer-in-charge.
36
-
-
... More
S&F second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.
0.18
-
-
... More
S&F 2nd class hardwood factory made glazed skeleton shutters 35 mm thick open rebated and prepared to receive guage etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers.
Note :- necessary beading used for securing the wire mesh rates included in this items.
36
-
-
... More
M&L in repairs for Plain fillets or beading of sectional area exc 3 Sqcm & n.exc 6 Sqcm of 2nd class hard wood square, rectangular or triangular in section , clean sawn, se-cured with nails or brads for securing wiremesh or similar works put together with glue pinned at joints in complete all as specified and directed by Engineer - in - Charge.
41
-
-
... More
Supply & fixing Factory made prefabricated Pressed steel Door frame made out of mild steel 1.25mm thick girth of frame 185mm including necessary MS rawl plug/bolts and fixing 75mm long butt hinges medium weight cold rolled mild steel etc and shutter including stiffeners made out of mild steel sheet 1.25mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angle etc as required with Locking arrangement using mild steel mortise lock 4 levers with 2 Nos of keys of size 100mm (Make Godrej/Harison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods out of 8 mm dia not exc 1000mm long fixed to mortise lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick complete including two coat of synthetic enamel paint over a shop coat of zinc chromate primer on interior surface (not -visible from front) and hammer tone paint on exterior surface (visible from front) as per Godrej Pattern complete all as specified and as directed by Engineer-in-charge.
21
-
-
... More
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame and including supply and fixing of medium weight stainless steel ISI marked butt hinges(03 Nos) 100mm size for each complete as specified by the manufacturer and as per directions of Engineer-in-charge.
100
-
-
... More
Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.
28
-
-
... More
S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified.
72
-
-
... More
S&F in repair butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified.
80
-
-
... More
S&F aluminium handle, 150mm size (back side flat staple D type), anodized (ISI marked) complete all as specified.
150
-
-
... More
S&F in repair aluminium handle, 150mm size (back side flat staple D type) anodized (ISI marked) complete all as specified.
80
-
-
... More
S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified.
120
-
-
... More
S&F in repair 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified.
50
-
-
... More
S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified.
64
-
-
... More
S&F in repair 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified.
50
-
-
... More
S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.
24
-
-
... More
S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.
15
-
-
... More
S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, articles of 2nd class hardwood, articles not exc 200 Cum each.
100
-
-
... More
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying one coat of red oxide zinc chrome primer and two coats of synthetic enamel paint (for steel surfaces) complete all as specified.
80
-
-
... More
M&L for preparation of old steel painted surfaces including as knotting, stopping, Burning off or removing, scraping etc,and then applying two coats of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge.
120
-
-
... More
M&L for preparation of surfaces of new wooden Surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
200
-
-
... More
M & L for applying two coats of synthetic enamel paint on old wood and wood based surfaces of any description, over 10cm width or girth, not other wise described including preparation of old painted surfaces.
200
-
-
... More
Dismantling of boarding any description fixed in any position with nails/ screws complete all as specified.
40
-
-
... More
Supply & fixing 18mm thick Plywood, grade BWR, type BB, fixed with screws to frame work along with one side laminate and other side plain white 0.9mm thick type-I, colour pattern as approved including PVC lipping, PVC sheet is heat bent as lipping on the edges of doors complete all as specified and as directed by Engineer-in-charge.
40
-
-
... More
M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished, colour and pattern as approved, fixed with adhesive as per makers instructions.
80
-
-
... More
S&F 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete all as specified and directed.
12
-
-
... More
S&F continuous (piano) hinges 20mm & 12 mm width of flap, mild steel bright finish or electro galvanised of complete all as specified fixed with CP steel screws.
40
-
-
... More
Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4), type B-1, excluding half brick but n.exc one brick complete all as specified.
72
-
-
... More
S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge.
450
-
-
... More
S&F Aluminium window shutter (glazed and gauzed both),side hung type without sash bars, aluminum section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (02 Nos) with Tower bolt 100 mm (02 Nos) powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.
Note : Glass and wiremesh will be measured and paid seperately.
60
-
-
... More
S&F Alumunium powder coated ventilator shutter including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (02 Nos) with Tower bolt 100 mm (01 Nos) powder coating of any colour (thickness of powder coating not less than 50micron)etc complete all as shown in drawing No CEBT/SK-936 sheet 1/1.
Note : Glass panes and wiremesh shall be measured and paid seperately under respectively Items .
12.5
-
-
... More
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc., complete all as specified.
90
-
-
... More
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.
25
-
-
... More
M & L sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified.
30
-
-
... More
All as per Ser item No 41.00 above but pin head type, figured glass complete all as specified and directed by Engineer-in-charge.
10
-
-
... More
S&F Framed work such as grills, gratings coolar stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.
605
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified.
672
-
-
... More
M&L for 25 thick cement concrete flooring type B-0, 1:2:4, (12.5 mm graded stone aggregate) complete all as specified and directed.
220
-
-
... More
M&L for vitrified ceremic coloured tiles 8mm thick (square / rectangular) area of each tile exceeding (600X600mm) 0.36 Sqm but not exceeding 1.0 Sqm in floors etc., set and jointed in neat cement slurry and pointed in epoxy grouted mixed with pigment to match the shade of tiles including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & faircomplete all as specified and directed by Engineer - in - Charge.
220
-
-
... More
All as per Ser item No 46.00 above but on vertical surfaces/skirting dados etc over 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed by Engineer - in - Charge.
22
-
-
... More
M&L Non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors etc complete all as specified.
90
-
-
... More
M&L for glazed ceramic coloured tiles 7 to 8mm thick 300 x 600mm size in verticle surface set and jointed in neat cement slurry and pointed in epoxy grouted pigmented to the shade also including 10mm rendering in CM 1:4 complete all as specified and directed by Engineer-in- Charge.
340
-
-
... More
Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed.
2
-
-
... More
Material and labour 18mm to 20mm thickness approved shade granite of minimum size equal to width of slab (not less than 610mm) machine cut, granite duly factory grinding and polishing and chamfering the outer edges (table rubbed and mirror polished) as in cooking platform and like laid over and including 25mm thick cement mortar (1:4) screed bed including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including accomodate the hole for gas pipe complete all as specified and as directed by Engineer-in-Charge.
20
-
-
... More
M&L, Machine cut kota stone slab flooring, cills 20 to 25mm thick over and including cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete used in a single pieces in steps osf stair case complete all as specified and as directed.
12
-
-
... More
M&L, Kota stone slab 20 to 25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including taking down plaster complete all as speciofied and directed
5
-
-
... More
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided.
6
-
-
... More
M&L for Water proofing treatment to RCC sunken slab and adjoining vertical surfaces (not exceeding 45 cm depth of sunken) as specified under :-
(a) Cleaning the surface with wire brush/ coir brush, removing loose material like dust particles,dirt e.t.c. (b) Rendering 15 mm thick in cement mortar (1:3) using coarse sand including mixing of liquid WPC in mortar @ 200 ml per bag of cement of 50 Kg trowel even and smooth with steel trowel on sunken surfaces .(Cost of WPC shall be included in the unit rate). (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls . (d) Applying first coat of two component modified polymer coating on the horizontal and vertical surface. (e) Provn of glass fibre mesh of 2x2 mm immediately on above coating. (f) Apply second coat of two component modified polymer coating after 72 hrs of above coating. (g) Joining the sanitary pipes with the waterproofing tape having bridging ability of more than 1.5 mm (h) Filling the gap between the wall opening and sanitary pipe with non shrink cementatious grout. Note:- (i) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer as per manufacturer instructions. (ii) The plan area of floor shall be considered for payment.
15
-
-
... More
M&L for PCC 1:5:10, type E-2, using 40 mm graded stone aggregate as in filling of sunken floors complete all as specified and diredted by Engineer-in- charge.
6
-
-
... More
M&L 40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as spedifed.
10
-
-
... More
Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge.
8
-
-
... More
M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.
8
-
-
... More
M&L half brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.
8
-
-
... More
Demolition of RCC of any description such as Roof slab , Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge.
Note : Reinforcement cut as required to facilitate demolition.
50
-
-
... More
M&L for reinforced cement concrete type M-25(20 mm graded stone aggregate) design mix as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed by Engineer-in-charge.
43
-
-
... More
M&L RCC M25 (20mm graded stone aggregate) design mix as in beams, cantileavers, bressummers, lintel over 1.50m span.
5
-
-
... More
M&L RCC M25 (20mm graded stone aggregate) design mix as in chajja complete all as specified and as directed.
2
-
-
... More
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.
5200
-
-
... More
M&L for TMT bars 6 to 8mm dia and over, cut to length spacers and binders required including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.
1600
-
-
... More
M&L for TMT 5mm dia and over, cut to length,bent to shape as in stirrups , spacers and binders the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.
455
-
-
... More
M&L for use and waste of form work torough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.
320
-
-
... More
M&L for formwork to sides and soffits of lintels & beams including supports, overhangs, etc. with rough finished surface of concrete complete all as specified and as directed.
110
-
-
... More
M&L for formwork to chullah hood, chajjas, troughs and similar items including edges for rough finished surface of concrete complete all as specified and as directed.
30
-
-
... More
M&L for formwork to edges of concrete flats,trads,break in floors,window cills,concrete railings,openings in concrete walls,floors and roofs n exc 20 cm wide and sides of RCC/Bands inwallls horizontal and sloping and similar work exc 5 cm but n.exc 10 cm wide.
120
-
-
... More
Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, all as specified.
280
-
-
... More
Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed.
45
-
-
... More
M & L for applying pitch free PU based Liquid applied single component elastomeric seamless, water and vapour proof membrane system for concrete @ 2.50kg/sqm (02 coats). Typical application will include roofs, podium, balcoies, floor slabs, suspended floors, patios, bathrooms, inspection pits, swimming pool, bridge decks, conforming tensile strength (2N/sqmm) (ASTM D412)/Tear resistance (15KN/m) (ASTM D624-00) and crack bridging (ASTM C 836/ASTM C 1305 modified) 2mm. After 72 hours of curing, flood test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water complete all as specified and directed by Engr-in- charge. Make :- Fosroc / Sika/Bostik/Choksey or Techno Commercial equivalent make as approved by GE.
Note :- (i) All above operations to be done by auth application in order all as specified and directed. (ii) Auth company will submit confirmation of their Auth applicator before execution of Work.
250
-
-
... More
M&L for cement concerete type C2, 1:3:6, (20 mm graded stone aggregate) as in roof padding etc complete all as specified and dirceted by Engineer-In-Charge.
12.5
-
-
... More
M&L for making benching with PCC (1:2:4), type B0, using WPC along side wall adjoining to roof in concave shape complete all as specified.
1
-
-
... More
M&L Cement concrete tiles 25cm x 25xcm x 20 mm thick,with gray cement and no pigment machine pressed; set, jointed and pointed in neat cement slurry over and including cement 15 mm thick scereed in CM (1:6) with and including liquid water proofing compund as per manufactures,s specifications, as in toof and floor tiles complete all as specified and directed.
250
-
-
... More
Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store.
170
-
-
... More
Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store.
240
-
-
... More
Supply and laying of 20 mm bore CPVC pipes SDR 11 7 CPVC SDR 11 Brass fittings (MTA,FTA) as required for fixing of diverter, health faucet,shower etc fixed to walls and ceiling or laid in floor,bore of pipe 20mm including all fittings complete all as specified and directed by Engineer-in-charge.
170
-
-
... More
Supply and laying of 25 mm bore CPVC pipes SDR 11 7 CPVC SDR 11 Brass fittings connected to over head tank woth necessary ball valve fixed to walls and ceiling or laid in floor and required for open water tubing and making good, bore of pipe 25mm including all fittings complete all as specified and directed by Engineer-in-charge.
240
-
-
... More
M& L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth In brick walls.
170
-
-
... More
S&F in replacement kitchen rack/dish rack (kitchen stand or wall mounted) of size 750mm x 600mm x 250mm (appx size) and thickness of SS strip of 1mm fixed on wall including necessary arrangements and fitting accessories etc complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
Taking down carefully Kitchen Rack / Dish Rack (wall mounted) and refixing after repair to building work including fixing/hanging material as required complete all as directed by Engineer-in-charge.
6
-
-
... More
S&F in replacement sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all specified and directed by Engr-in-charge.
6
-
-
... More
S &F Sink in refixing without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs , washer and waste, including bedding in cement mortar and all necessary fitting and also cleaning of sink board complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
S&F in repairs 15mm bore Long body bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
24
-
-
... More
S & F in repairs 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed.
84
-
-
... More
S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified.
60
-
-
... More
S&F in repairs brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.
12
-
-
... More
S& F CP single lever concealled high flow diverter body including upper trim for bath and shower system including bath spout and necessary fittings complete all as specified and directed by Engineer in charge.
12
-
-
... More
S&F Brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin including with necessary fittings complete all as specified and directed.
12
-
-
... More
S&F Brass CP Kitchen Mixer for mixing hot and cold water screwed down for iron pipe and fied including necessary fittings complete all as specified and directed by Engineer - in - Charge.
12
-
-
... More
S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including all necessary fittings complete all as specified.
12
-
-
... More
S&F in repair fancy type SS curtain rod 25 mm dia with brackets knob rings (20 cm c/c) etc including all necessary fittings complete all as specified and directed by Engineer - in - Charge.
12
-
-
... More
S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.
120
-
-
... More
S&F Stainless Steel grating 125mm dia with waste hole (Minimium weight 40 grams)
12
-
-
... More
S&F Stainless Steel grating 100mm dia without hole (Minimium weight 25 grams)
24
-
-
... More
S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.
12
-
-
... More
S&F in replacement corner vitrous China wash basin , white, flat back of size 450mm x 390mm, including brackets, waste coupling & PVC waste pipe of 32 mm dia etc and cutting for and pinning in end of brackets or erecting with long screwed shanks & fly nuts, flange end bedded in red lead cement including necessary fittings complete all as specified and directed by Engineer-in-charge.
12
-
-
... More
S&F in repairs Vitreous china premium/1st quality wash down water closet wall hung EWC white (closed pattern incl all necessary like rag bolts/gel gasket, PVC (SWR) WC connector benty type etc.) Plastic water closet soft slim seat cover, white, closed pattern with flat bottom, and cover with aluminised hinging device complete all as specified and as directed.
12
-
-
... More
S&F in repairs concealed cistern set with full frame compatible with wall hung type water closet complete all as specified and drected by engineer in charge.
12
-
-
... More
Dismantling water tanks of any description exc 250 and n.exc 500 ltrs capacityand removal from site all as specified and directed.
12
-
-
... More
S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks Triple layered White coloured (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete, all as specified and directed.
12
-
-
... More
S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastec ball screwed for iron pipe and fixed including necessary fittings. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed.
12
-
-
... More
S&F 25mm gun metal globe or gate valve with iron wheel head, screwed both ends for CPVC 25mm dia pipe and fixed also including necessary fittings complete all as specified and directed.
24
-
-
... More
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store.
Note : Measured overall as fixed along the centre line over fittings and accessories.
35
-
-
... More
Dismantling and disconnecting existing CI soil waste/vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories
45
-
-
... More
Dismantling and disconnecting of existing CI soil waste/vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories
20
-
-
... More
S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all necessary fittings as specified and directed.
80
-
-
... More
S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all necessary fittings as specified and directed.
20
-
-
... More
S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed.
24
-
-
... More
M&L PVC (SWR) junction 110 mm branch piece equal or unqual complete all as specified and directed by Engineer-in-Charge.
12
-
-
... More
M&L PVC (SWR) junction 110 mm double (Single T), equal or unqual complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
S & F 75 mm bore of pipe PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
12
-
-
... More
S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed.
12
-
-
... More
M&L PVC (SWR) branch pieces, 75 mm bore, (equal or unqual), complete all as specified and directed by Engineer-in-Charge.
12
-
-
... More
M&L PVC (SWR) 75 mm P Trap complete all as specified and directed by Engineer-in-Charge.
12
-
-
... More
M & L for Salt-glazed stoneware gully traps of size 150 x 150 mm, square or round mouthed, type 'P' complet all as specified.
6
-
-
... More
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc
1500
-
-
... More
M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
520
-
-
... More
M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces in two layers first layer 10mm thick and second layer 5mm thick with and including WPC 3% by weight of cement finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
800
-
-
... More
M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces on patches finished even and smooth without using extra cement in patches complete all as specified and directed by Engr-in-Charge.
180
-
-
... More
M&L for prepration of New plastered Internal wall surface complete applying the following :-
(a) Applying two coats wall care putty (1.5mm thick each coat ) on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified
(b) Applying one coat of internal Wall Primer by using Roller over complete all as specified
(c) Applying two coats of interior Apcolite Premium Emulsion Roller over complete all as specified Note : (i)Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible (ii) The prepared surface after wall putty GE will inspect and approve the further internal finishes work after approval of the prepared surface through written order.
520
-
-
... More
M&L for prepration of New plastered External wall surface complete applying the following :-
(a) Applying two coats wall care putty (1.5mm thick each coat) on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified
(b) Applying one coat of Exterior Wall Primer by using Roller over complete all as specified
(c) Applying two coats of Apex Advcanced Dust Proof Emulsion using Roller over complete all as specified Note : (i) Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible. (ii) The prepared surface after wall putty GE will inspect and approve the further external finishes work after approval of the prepared surface through written order.
800
-
-
... More
M&L for applying two coats of white wash on newly plastered surface of ceiling etc complete all as specified.
180
-
-
... More
M&L for prepration of complete removal of Internal wall surface complete applying the following :-
(a) Applying two coats wall care putty (1.5mm thick each coat) on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified
(b) Applying one coat of internal Wall Primer by using Roller over complete all as specified
(c) Applying two coat of interior Apcolite Premium Emulsion Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible
800
-
-
... More
M&L for applying two coats of white wash on old plasterd ceiling surfaces etc complete all as specified.
360
-
-
... More
M&L for prepration of old plasterd External wall surface complete applying the following :-
(a) Applying two coats wall care putty(1.5mm thick each coat) on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified
(b) Applying one coat of Exterior Wall Primer by using Roller over complete all as specified
(c) Applying two coats of Apex Advcanced Dust Proof Emulsion using Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible.
400
-
-
... More
M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed by Engineer - in - Charge.
14
-
-
... More
M&L for Writing letters or figures with fluorecent paint ( Block. Roman, Italic or Indian) n exc. 30 cm high etc complete all as specified and directed by Engineer - in - Charge.
6.6
-
-
... More
M&L for welding in repairss Thickness of metal to be welded will be Exc 9 mm but not exc 20mm complete all as specified and directed by Engineer - in - Charge.
6
-
-
... More
M&L for Mild steel work as ISMB, joists channel,angle or tee section fixed adjacent to ceiling and embedding in floor and brickwork including cutting welding and the like including caps.bases,splices etc,built from one or more beam or channel section or angle with plates including all lattice bars, stiffeners,gusset plates including necessary welding,rivetting etc.confirming to Fe 410 (Gde E-250) quality A etc all as specified and directed by Engineer-in-charge.
150
-
-
... More
M&L for shotcreting average thickness 25mm in RCC columns, beams and slab etc. (with mix minimum cement content of 350 Kg per Cum, M-25). Concrete having the specified minimum characteristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregates of 6mm to 10mm size in proportion as per design criteria) incl the cost of centering and shuttering at edges and corner etc as directed by Engr-in-Charge incl chipping of unsound/week concrete material 25mm average thickness from slabs, beams/columns etc with mannual Chisel or standard power driven percussion type all of approved makes incl tapering of all edges, making square shoulder of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and throughly washing with water and allowing it to dry etc incl removel of rust by applying approved rust remover chemical and the coating with Dr Fixit Epoxy zinc primer @ 6 Sqm per Litre at DFT of 100 micron as per manufacturer's instruction and specification, including 5mm thick cement plaster in CM 1:3 finished even and smooth without using extra cement including removing rubbish material from building and thrown in low lying empty area at any distance from the site as directed complete as specified and as directed by Engineer-in-Charge. Note : Complete treatment to be executed by approved applicator.
30
-
-
... More
Supply and fixing hard drawn steel wire fabric not exc 4kg/sqm cut to lengths, wire mesh to be fixed and firmly anchored to the concrete surface by means of 'L' shaped mild steel shear key welded with existing reinforcement including cost of material, labour, tools and plants incl welding/L-clip/tying with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
100
-
-
... More
Drilling Holes of 12mm dia up to 100 mm deep holes in structural members at the interval of 300 mm in staggered manner or along the crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc. complete all as specified and as directed by Engineer-in-charge.
100
-
-
... More
Grouting, injecting two parts, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout having following properties:- (i) Mixed Density 1.1 kg/l (at +27°C); Viscosity ~ 250 mPas at +30°C and should comply according to ASTM C 881, Type II and IV, Grade-1, Class E+F (ii) Compressive strength = 70 N/sqmm (7 days) according to ASTM C 579; Tensile Strength ~ 50 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); Tensile Modulus ~ 2000 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); (iii) Bond Strength ~ 10.8 N/sqmm (failure in concrete) after 14 days at +30°C cure; Flexural strength ~ 50 N/sqmm according to ISO 178. (iv) Seal the nozzle with thixotropic epoxy adhesive after the refusal of grout material from the nozzle. Note:- leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as specified and as directed by Engineer-in-charge.
Note :- Mode of measurement: per kg of material consumed
15
-
-
... More
Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.
339
-
-
... More
M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for metal flush boxes suitable length and thickness for mounting, switches, sockets,fan regulator with cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.
201
-
-
... More
All as per Ser item No 139.00 above but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.
48
-
-
... More
All as per Ser item No 139.00 above but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.
36
-
-
... More
All as per Ser item No 139.00 above but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.
36
-
-
... More
All as per Ser item No 139.00 above but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer - in - Charge.
6
-
-
... More
All as per Ser item No 139.00 above but for call bell point complete all as specified and directed by Engineer - in - Charge.
12
-
-
... More
S & F in replacement switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.
237
-
-
... More
S & F in replacement switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.
48
-
-
... More
S & F in replacement switch socket combination 6 Pin, 5/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.
24
-
-
... More
S & F in replacement switch 2 way 6A complete all as specified and directed by Engineer - in - Charge.
12
-
-
... More
S & F in replacement Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.
36
-
-
... More
S&F in replacement bell push 6 A complete all as specified and directed by Engineer – in - Charge.
12
-
-
... More
S & F in replacement stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge.
36
-
-
... More
S&F in replacement buzzer AC 230 Volt single pole ding dong type complete all as specified and directed by Engineer - in - Charge.
12
-
-
... More
S & F in replacement ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.
123
-
-
... More
S & F in replacement of existing light fitting with LED batten 20W LED batten with 'Eye Soft' technology & glarefree diffuser for perfect application in modern homes or aliminium housing and integrated electronic driver, 20 watt having input voltage AC 140-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.
60
-
-
... More
S&F security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operate on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge.
3
-
-
... More
S & F in replacement Water tight bulk head fitting (New pattern),comprision of connector, weather proof enamelled gallery, including 10 watt LED llight with separate driver all as specified and directed by Engineer - in - Charge.
6
-
-
... More
S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.
72
-
-
... More
S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.
72
-
-
... More
S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in and including steel dia 25mm “medium quality” conduit including 6.00 Sqmm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour, necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge.
Note :Two run cable, one run of wire and one run of PVC conduit will be measured as one unit.
100
-
-
... More
S&F in repairs Sheet metal enclosure for single door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting SP & N 8 Way 240 Volt ISI marked 200 Amps busbar stove enameled dust and vermin proof suitable for incorporation MCBs and Isolators etc complete all as specified and directedby engineer -in-charge.
12
-
-
... More
S & F in replacement MCB ‘C’ series type suitable for 240 volts, AC supply 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
12
-
-
... More
S & F in replacement MCB ‘B’ series type suitable for 240 volts, 10 KA, AC supply 6 to 32 Amps , single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
90
-
-
... More
S&F in repairs Sheet metal enclosure for double door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 14 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N3 Frame upto 125A, Isolators and including give connection with wire and cable etc complete all as specified and directedby engineer -in-charge.
3
-
-
... More
S&F in repairs MCCB 4 pole, 63 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.
3
-
-
... More
M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point all as specified and directed by Engr -In - Charge
3
-
-
... More
S&F heavy duty metal body exhaust fan of 300 mm sweep, 240 volt, copper winding, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc.
12
-
-
... More
S&F exhaust fan made of sturdy engineering plastic of 250mm sweep,, 240 volt complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to disturbed wall in cement mortar (1:4) white washing matching with existing colour etc
12
-
-
... More
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.
36
-
-
... More
M&L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.
36
-
-
... More
Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed by Engr-in-Charge.
36
-
-
... More
S&F rigid non metallic PVC conduit 20mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.
15
-
-
... More
S&F TV socket having holes for 20mm conduit entry for TV connection complete all as specified and directed.
12
-
-
... More
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for laying of cables including taking up or down the LT cable complete all as directed
21.6
-
-
... More
Returning, filling in, including spreading, leveling, watering and well ramming in soft/loose soil in layer not exceeding 25 cm thick complete all as specified and directed by Engineer - in - Charge.
12.1
-
-
... More
Removal of excavated material to a distance n. exc 50m and deposited where directed at level n. exc 1.5m above the starting point complete all as specified and directed.
9.5
-
-
... More
M & L for sand cushioning with dry coarse sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge.
Note : Thickness after punning shall be considered for payment.
6.5
-
-
... More
Supply and lay standard size bricks sub class 'B' type complete all as specified and directed.
0.64
-
-
... More
Supply and lay jointing and testing and commissioning in replacement of 25 Sqmmx4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.
100
-
-
... More
Supply and lay GI pipe 50mm light grade for cable protection in walls trenches or any situation including clamp nut bolt etc complete all as specified and directed.
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%