Military Engineer Services Tender

S&F in repairs factory made flush shutters 35mm thick 7 ply construction, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long, dia 10mm - 2 nos per leaf (b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos. per leaf (c) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm, 12 mm dia - 1 Nos. per leaf (d) Stainless Steel (304 Grade) Finished Floor Door Stooper,150 mm long and tongue, Overall length of cover plate 140mm anodised, with hard drawn steel spring - 1 Nos. per leaf complete all as specified and directed

M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per makers instructions. complete all as specified and directed.

S & F in repairs factory made second class hard wood glazed and skeleton window/door shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a) and stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including 125 mm SS hinges (03 Nos),200 mm long Aluminium tower bolt (02 Nos) and 300mm long Aluminium sliding bolt (01/02 Nos) & Aluminium handles (02 Nos) each, including two coats of synthetic enamel paint over a coat of pink primer on new surfaces of wooden and wood based materials over 10 cm width or girth with preparation of surfaces complete complete all as specified and directed.

S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of but of Frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately), including 125 mm SS hinges (03 Nos),200 mm long Aluminium tower bolt (02 Nos) and 300mm long Aluminium sliding bolt (01/02 Nos) & Aluminium handles (02 Nos) each complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F 4mm sheet glass ordinary quality and glazing with oil putty/glazing clips in square n. exc 0.5 sqm in each plane complete all as specified and directed

S&F in repairs anodised aluminium frames for doors, windows side hung/top hung/sliding type (including sliding wheels, star locking arrangments etc) with one or moe rebates including jointing cleats for fixing etc, necessary joining cleats, glazing clips, ruber neoprene packing, power coating minimum thickness of power coating shall be 50 micron as per the specification) complete all as specified and directed

S&F in repairs powder coated aluminium door shutters (side hung/sliding),aluminium partition and similar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, sliding wheels, mortice lock, including Adequate No of handles in each door, hinges,powder coated aluminum snap beading screws, sliding channels, wheels, cleats etc. complete all as specified complete all as specified and directed. (Note : Weight of section used for door shutter to be measured at site before erecting at site.)

S&F in repairs powder coated aluminium windows and ventilator shutters, side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) including aluminium grill and wire mesh complete all as specified and directed. (Note : Weight of section used for door shutter to be measured at site before erecting at site.)

S & F in repair for 5.5mm thick sheet glass(tinted),selected quality and glazing with necessory arrangement in square exc 0.5 sq. m in each pane complete all as specified and directed

S&F in repair door closer hydraulically regulated, alunimiun body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

S&F in repairs brass mortice lock, vertical type, size 100 mm and 4 lever type complete all as specified and directed

M&L for two coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed

M&L for two coat of synthetic enamel paint on old painted surfaces of steel and iron work over 10 cm width or girth including preparation complete all as specified and directed

S&F in repairs Single piece EWC with UF Seat Cover ,Hinges, Accessories Set Size 385 x 595 x385 mm white complete, including concealed body flushing cistern with hinging arrangement, complete all as specified and directed

S&F in repair 32mm dia PVC down take waste pipe for WHB of 75cm long as in repairs complete all as specified and directed

S&F in repairs wall hung WC with UF Seat Cover ,Hinges, Accessories Set Size 385 x 595 x385 mm white complete, including concealed body flushing cistern with hinging arrangement, complete all as specified and directed

S&F in repairs frameless rectangular LED Mirror with touch switch 600mm x 800 mm 5 mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection. mounted on wall with necessory fiments complete all as specified and directed

S&F in repairs CPVC pipes of dia 20 mm SDR 11 & Plain CPVC SDR 11 inlcuding all fittings i.e.Brass elbow, Brass Tee, Male threaded Brass adaptor, Female threaded brass adaptor, unions ball valves, flange and tank adaptor etc) concealed including cutting chases to brick wall/ceiling or laying in floors/trenches and making good complete all as specified and directed. (Note : Rates of taking down are included)

S&F in repairs CPVC pipes of dia 25 mm SDR 11 & Plain CPVC SDR 11 inlcuding all fittings i.e.Brass elbow, Brass Tee, Male threaded Brass adaptor, Female threaded brass adaptor, unions ball valves, flange and tank adaptor etc) concealed including cutting chases to brick wall/ceiling or laying in floors/trenches and making good complete all as specified and directed. (Note : Rates of taking down are included)

S&F in repairs CPVC pipes of dia 32 mm SDR 11 & Plain CPVC SDR 11 inlcuding all fittings i.e.Brass elbow, Brass Tee, Male threaded Brass adaptor, Female threaded brass adaptor, unions ball valves, flange and tank adaptor etc) concealed including cutting chases to brick wall/ceiling or laying in floors/trenches and making good complete all as specified and directed. (Note : Rates of taking down are included)

S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary scaffolding upto the height of building from ground leve. complete all as specified and directed. (Note : Rates of taking down are included)

S&F in repairs 110 mm dia PVC (SWR) bend/tee with oval access door complete all as specified and directed. (Note : Rates of taking down are included)

Fixing of old inbuilt locker including fixing of nut bolts 4 Nos of any size in each locker including providing hinges, handles, locking arrangement, Iron legs (as per site requirement), 10-20mm dia stainless steel hanging rod for clothes and complete welding work of steel inbuilt lockers including two coat painting with synthetic emulsion paint complete all as specified and directed.

S&F in repair 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with both side white balancing (BSB) with density of 850 Kg/cu.m complete all as specified and directed. Make : Action Tesa/ Greenpanel/Century Note : (i) Board on back side wall will be fixed with minimum 5mm PVC spacers. The payment for the same deemed to be included in the quoted unit rates. (ii) Rates of following items are included : (i) Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree. (ii) Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs. (iii) Tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished. (iv) D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished. (v) Butt hinges of size 75mm of stainless steel 202 Grade finished/of outer plate metal. (vi) Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed.

S&F in repairs venitian window blinds of any size with closing and opening arrengement for size of window opening not exc 2.0 sqm eachc omplete all as specified and directed.

S&F in repairs bathroom cabinet of PTMT with looking mirror of size 350x555mm complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 to brick/ concrete wall/ceiling surfaces finished even & smooth withou using extra cement including taking down old plaster complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 to brick/ concrete wall surfaces finished even & smooth without using extra cement including taking down old plaster complete all as specified and directed.

M&L for 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement including taking down old plaster complete all as specified and directed.

M&L for Applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall/Ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed.

M&L for preparation of existing treated surfaces on walls/ceilings and applying 01 coat of interior emulsion paint (light shade) @ 20 sq.m/litre/1 coat by using roller to wall/ceiling surfaces including filling wall putty in depressions, sand papering etc and making the surface smooth and applying a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

M&L for preparation of surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/ balcony etc and applying one coat of cement base paint with highlighter of any existing shade, @ 5 sq.m/kg/1 coat by using following brands of cement based paint and primer by brush or roller complete all as specified and directed.

M&L in repairs Sun/Solar control window film reflective type with transmittance 50-70% (as approved) sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

Cutting holes in brick (n.exc half brick) walls in cement mortar for inserting holdfasts and making good complete dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required with two coats of Acrylic Emulsion Paint complete all as specified and directed.

M&L in repairs for factory made white colour 3- TRACK UPVC sliding window are made of UPVC extruded profiles with wall thickness of 2.3 mm ( + 0.2 mm), Window profile with hollow section with multi chamber, Frame (122 mm x 54 mm), Sliding Glazed sash (80 mm x 47 mm), Mesh sash (64 x 47mm) Sliding interlock (One vertical length in each shutters ) (43 mm x 50.5 mm), Glazing bead (29.5 mm x 21.8 mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket, 1.5 mm (+0.2 mm) thick, galvanized steel in Frame 2 Nos, Sliding sash and Sliding mesh sash to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners. complete as per manufacture's specification and direction of Engineer-in charge.

S&F in repairs PVC false ceiling consisting of 600mm x 600mm, 5mm (±0.25) thick Plain embossed PVC sheet of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, used as panel insert in and including frame work made using powder coated aluminum T- section of sizes 1” x1” ( 25x25mm, 19 gauge or 1mm thick ) in square pattern of grid sizes of 2’x2’( 600x600mm ). The aluminum framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1” ( 25x25mm ) angles etc. Complete as per direction of Engineer-In-charge, manufacturer’s specification & drawing.

S&F in repairs factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 122 x 54 mm & sash 47 x 80 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.50 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.

M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregate) as in slab supported on walls, beam and column in floors, roofs,landings,balconies,deck slab, parapet walls and in shelves and etc and setting in mortar complete with joints to match including demolition of exisiting RCC complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M & L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles. including dismantling exisiting brick work complete all as specified and directed.

M&L for Roof treatment to RCC roof as follows :- (a) Dismantling of brick tiles or terracing tiles single layer on roof including mud phuska also taking down existing APP membrane & disposal of retrieved matrial upto a distance n.exc 100m where directed, all as specified. (b) M&L for applying Pitch free PU based Liquid applied single component elastomeric seamlss, water and vapour membrane system for concrete @ 2.50 Kg/M2 (02 Coats). Typical application will include roofs, podium, balconies, floor slabs, suspended floors, patios, bathrooms, inspection pits, swimming pool, bridge decks, conforming tensile strength (2N/mm2) (ASTM D412)/Tear resistance (15 KN/m) (ASTM D624-00) and Crack bridging (ASTM C 836/ASTM c 1305 modified) 2mm. After 72 hours of curing, flood test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barries placed to contain the water. Make : Equivalent jof Fosroc/Sika/Bostik / Choksey etc. (c) M&L for providing and applyig polyurethane liquid applied roof waterproofing with improved water ponding capability thermal insulating Elastomeric high build liquid membrance for concrete roofs for exterior wall and exposed surface with solid content not less than 60% and solar reflectance Index 106 as per (ASTME-1980-19) / Tear Strength ~ 20 N/mm (Free film, 14 days, + 300 C) (ASTM D4541) Make : Equivalent of M/s Sika India Pvt Ltd / Fosroc / Chemso / Bostik / Choksey etc. Note : (i) For roof treatment and sunken treatment shall be applied by the Company's authorised applicator firm only. (ii) Contrator has to get prior approval of applicator or authorised agency by submitting its authorisation letter to this office for approal prior to commencement of work. Departmetn will conduct an officical verification from the manufacturer of its authorised agency.(iii) Submission of 10 years warranty certificate for Roof Treatment and 5 years warranty certificate for Roof Treatmet and 5 years warranty for sunken treatment is mandatory after completion of work. (iv) The cost of scaffolding, temporay supports work, if required at certain places is included in the respective items catered for repair itself. No extra cost shall be paid for the same.

M&L granite (of any type) work 16 to 20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm of screed bed in CM 1:6 complete all as specified and directed.

M&L for PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in roof kerbs / benching / coved fillets etc rounded or chamfered on edges including demolition of exisitng PCC complete all as specified and directed.

M&L for PCC (1:2:4) B0 using 12.5 mm graded stone aggregate as in levelling padding course over RCC roof surface to receive APP membrane or alike/in floors, with approved water proofing compound all as per manufacturer's instructuions on the roof surface to achieve requisite slope all as specified and directed. (Note :- Supply only water proofing compound shall be measured & paid separately).

M&L in repairs for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement and fixing of chicken wire gauge where directed complete all as specified and as directed. Note : WPC and chicken wire gauge will be measured and paid separately as supply only under respective items.

Supply only integral liquid water proofing compound complete all as specified & as directed.

Supply only chicken wire mesh 22 gauge of size not less than 20X20mm complete all as specified & as directed.

M&L 10 mm thick cement plaster in cement mortar 1:3 on ceiling/roof top surfaces finished even and smooth without using extra cement complete all as specified & as directed.

M & L for three coats of white washing on new plastered surfaces ceiling surface including preparation of surface complete all as specified & as directed.

M & L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over 1 mm thick wall putty complete all as specified & as directed.

S&F in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.

S&F in repairs 25 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.

S&F in repairs MS falt iron 50/6 x 6mm as in hold fast confirming to Fe 290 Gde E-165 complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs110mm bore PVC 'S/P' Trap complete all as specified and directed.

S & F in repairs stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed.

M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge:- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 over the coating as per requirment. (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout. (k) PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete or filling in sunken floor(l) Providing 40 mm bore GI pipe spout length 15 cm beyond external surface of the wall complete all as specified and directed by Engineer-in-Charge. Make:- Dr. Fixit/Fosroc/STP Note: (i) PCC filling in sunken portion will be measured seperately. (ii) Rates for Demolition of ement concrete (unreinforeced) of any description and in any position for sunken portion (below or above ground level) Note : (i) For roof treatment and sunken treatment shall be applied by the Company's authorised applicator firm only. (ii) Contrator has tog get prior approval of applicator or authorised agency by submitting its authorisation letter to this office for approal prior to commencement of work. Departmetn will conduct an officical verification from the manufacturer of its authorised agency.(iii) Submission of 10 years warranty certificate for Roof Treatment and 5 years warranty certificate for Roof Treatmet and 5 years warranty for sunken treatment is mandatory after completion of work. (iv) The cost of scaffolding, temporay supports work, if required at certain places is included in the respective items catered for repair itself. No extra cost shall be paid for the same.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) Premium (1st qulaity) straight edges, glazed ceramic coloured tiles area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in matching coloured polymer based grout to match over and incl 20 mm thick screed bed in cm 1:4 complete all as specified and directed. (Note : Rates of dismantling of floor hearth or wall tilling including CM bedding are included.)

M&L 600/x300x7/mm / 450x300x7mm mm thick Premium (1st qulaity) straight edges, glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in matching coloured polymer based grout to match the shade of tiles including 10mm backing coat in CM 1:4 and dismantling of existing tiles of any pattern complete all as specified and directed. (Note : Rates of dismantling of floor hearth or wall tilling including CM bedding are included.)

S&F in repair, vitreous china squatting pan "ORISSA" pattern white, of size 580x440mm with integral foot rest, CI 'P' trap etc including PVC low level flushing cistern 10 liter capacity, valveless, syphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density, 01 x PVC connection 15 mm dia and 450mm long & bracket etc complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern)/Wall Hung, white complete, including white seat cover with hinging arrangement, including PVC low level flushing cistern 10 liter capacity, valveless, syphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density, 01 x PVC connection 15 mm dia and 450mm long & bracket etc complete all as specified and directed.

S&F in repair for vitreous China urinals,full stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) and including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

Supply and fix in repairs vitreous china wash hand basin counter shank with green/black granite slab to be cut and polished at site as per requirement, brackets, 32mm bore brass chromium plated waste coupling & 32mm bore low density polythelene (LDPE) flush pipe of pressure 6Kgf/Sqcm (1.00M long,) including 15mm bore 450/600mm length PVC connection with PTMT nuts and fancy type CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed including Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. (Note : Granite stone shall be measured and paid seperately)

S&F in repairs soap dish CP brass 100mm dia (round or oval) fixed to walls or dados. complete all as specified and directed.

S&F in repairs CP shower rose 125mm size and 15mm dia, fixed in repairs complete all as specified and directed.

S&F in repair CP Tubular towel rail, 20mm dia, D type, 600mm long between flanges fixed with CP brass screws complete all as specified and directed.

S&F in repairs frameless bevelled edge mirror of selected qualite glass mounted on 6mm thick acrylic sheet or commercial plywood and fixed to wooden plugs with chromium platedbrass screws and cup washers complete all as specified and directed.

S&F in repairs 15mm bore PVC connections, with PTMT nuts, of length 450/600mm complete all as specified and directed.

Supply and fix in repairs chromium plated angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with quarter turn type handle for iron pipe or for union and complete all as specified and directed.

S&F in repair concealed chromium plated stop valves, cast copper alloy 15 mm bore screwed down high pressure with quarter turn type for iron pipe or for union and complete all as specified and directed.

S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bib taps cast copper alloy, chromium plated fancy type with quarter turn handle screwed down screwed for Iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Grating doom 100mm dia of CP (Minimum weight 25gms) complete all as specified and directed.

S&F in repair 100x100 mm /125 x 100 mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' or 's' type complete all as specified and directed.

M & L for 75mm thick cement concrete type C-2, 1:3:6 using 20mm graged aggregate as in plinth protection inclduing demolition of existinjg plinth protection complete all as specified and directed.

M & L for 25 mm thick cement concrete type B-1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement including demolition of existing cement concrete complete all as specified and directed.