Military Engineer Services Tender

Supply only integral liquid water proofing compound (ISI marked) complete all as specified & as directed.

M&L for complete removal of existing treatment of any type/description such as distemper work, internal emulsion etc, including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc from internal surfaces of walls & ceiling with mechanical means/grinder complete all as specified & as directed.

M&L for complete removal of existing treatment of any type/description such as distemper work, internal emulsion etc, including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc from external surfaces of walls/ RCC surfaces/ soffits of chajjas/ roof projections/ cantilevers/ balcony etc with mechanical means/ grinder complete all as specified and as directed.

M&L for applying acrylic wall care putty 2mm average thickness in external walls/ RCC surfaces/ soffits of chajjas/ roof projections/ cantilevers/ balcony etc (thickness vary as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed. Make of wall Putty : JK wall Putty/ Birla Wall care Putty/ Bison Wall Putty. Notes: (i) The prepared surface after wall putty, the contractor will inform to the GE.as well.as to the Engineer-in Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer in-Charge through site order.

M&L for applying Two or more coats of 100% Premium acrylic emulsion exterior paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality] Make of Exterior Emulsion : Asian: (APEX) /Berger (WEATHER COAT ANTI DUST) / Nerolac (EXCEL TOTAL)

M&L for preparation existing treated surfaces of external walls/ RCC surfaces/soffits of chajjas/ roof projections/ cantilevers/balcony etc including cornices and applying 01 coat of exterior emulsion paint @ sqm/litre/1 coat by using roller to external walls/RCC surfaces/ soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces of exterior emulsion by using following brands of emulsion complete all as specified and directed. Make of Exterior Emulsion:- Asian (APEX) / Berger (WEATHER COAT ANTI DUST) / Nerolac (EXCEL TOTAL).

M&L for preparation newly palstered surfaces of external walls/RCC surfaces/soffits of chajjas/ roof projections/cantilevers/ balcony etc including cornices and applying two coats of cement base paint @ 5 sqm/kg/1 coat over a coat of cement base primer by using following brands of cement based paint complete allas specified & as ditected. Make of Cement Paint : Snowcem Plus (Snowcem Paints).

M&L for preparation existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/ roof projections/ cantilevers/ balcony etc including cornices and applying one coat of cement base paint @5 sqm/kg/1 coat by using following brands of cement based paint complete all as specified & as directed. Make of Cement Paint : Snowcem Plus (Snowcem Paints)

M&L for applying acrylic thick wall care putty on internal surfaces of walls/ceilings (thickness vary from 1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all a s specified and directed. Make of wall Putty : JK wall Putty / Birla Wall care Putty /Bison Wall Putty. Notes: (i) The prepared surface after wall putty, the contractor will inform to the GE as.well.as to the Engineer-in Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface-from the GE as well as to the Engr-in-Charge through site order.

M&L for applying 02 coats of interior emulsion paint 10 sqm/litre/2 coats by using roller to wall surfaces over &including a coat of interior wall primer @ 10 sqm/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specifled and directed. Make of Interior Wall-Primer: Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) /Berger (BISON) / Nerolac (BEAUTY SMOOTH).

M&L for applying 02 coats of interior emulsion paint @ 10 sqm/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sqm/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer: Asian Berger / Nerolac Best Quality]. Make of Interior Emulsion Asian (TRACTOR) Berger (BISON) /Nerolac (BEAUTY-SMOOTH).

M&L for preparation existing treated surfaces on walls by filling wall putty in depressions, sand papering etc and making the surface smooth and applying 01 coat of interior emulsion paint (light shade) @ 20 sqm/litre/1 coats by using roller to wall surfaces over & including a coat of interior wall primer 10 sqm/litre 1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all a s specified and directed. Mäke of Interior Wall Primer. Asian /-Berger / Nerolac (Best Quality). Make of Interior, Emulsion Asian (TRACTOR) Berger.(BISON) / Nerolac (BEAUTY SMOOTH).

M&L for preparation on newly plastered surface of walls and applying 3mm thick wall care putty on plastered wall surfaces and applying two coat of interior emulsion paint all as specified and directed by Engr-in-Charge.

M&L for preparation newly plastered surfaces of walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 Kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth.1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream about 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M&L for preparation newly plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream about 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M&L for preparation old plastered/unplastered surfaces of walls and applying two coats of white wash by making the lime staked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours: and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub resistant. small quantity of ultra marine blue (upto 3 gm per kg of lime) shall also beadded to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M&L for complete removal of the existing treatment on ceilings by mechanical means and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall b e allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub resistant. Small quantity of ultramarine blue (upto 3 g m per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M&L for preparation existing treated surfaces on walls including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rüb resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M&L for preparation existing treated surfaces on ceiling including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream about 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lme for making the coating hard and rub resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, including hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, including hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for preparation old painted wood & wood based surfaces of any description, not exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. Make: Asian Paints/Berger/Nerolac (Ist-Quality).

M&L for preparation old french polishing on surfaces of any description, width or girth including cleaning and preparing and applying two coats of drench polishing to old wooden surfaces including a coat of wood filler complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for preparation old painted steel and iron surfaces of any description, not exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for writing letters or figures (Block, Roman, Italic.or Indian) not exceeding 30cm high complete all as specified and directed.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed.

M&L for removing up roots of vegetation growth on building roof top/ sides of walls of any height n exc 30cm girth and applying suitable acid for burning of the roots in the RCC/ brick wall surfaces including stacking of serviceable materials and disposal of unserviceable materials to a distance n exc 50m and cleaning of site and making good of the disturbed surfaces in brick work in CM 1:4 and rendering 10mm thick plaster in CM 1:4 or pointing in the same mortar surface area n exc 1 sqm in each place complete all as specified and as directed. Note for serial item No 1.00 to 32.00 of BOQ : The cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double storey building as directed by Engineer-in-Charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this.