Military Engineer Services Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 1,15,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_689458_1Tender No
82425/86/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Notes- Applicable for all items:- (viii) T&P :-
(aa) The contractor is responsible to provide all T& P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site.
(ab) Any other misc works/services connected with user facilitation as per direction of Engr-in-Charge.
(ac) The responsibility of taking the tradesmen to complaint site will be of contractor.
(ix) Sign Boards :- For each complaint cell, adequate flex sign board of approved size will be placed in complaint cell by contractor. The content of the flex board will be approved by Engr-in-Charge/GE.
-
-
-
... More
Notes- Applicable for all items:- (b) Penalty Clause Contractors will pay penalty on account of non addressal of complaints in given time frame and quality of feedback as per matrix given below. The penalty will be levied by Engr-in-Charge/GE after ascertaining the quality feedback given by user and time taken to address the complaints and justifiable delay, if any. The penalty matrix is as given below :- PENALTY
Time delay Satisfactory Partially satisfied Not satisfied
Less than 24 hrs Nil Rs.100 Rs.200
24 hrs to 48 hrs Rs. 200 Rs.300 Rs.400
48 hrs to 72 hrs Rs. 400 Rs.500 Rs.600
72 hrs and more Rs. 600 Rs.700 Rs.800
c) Management of urgent nature of complaints such as leakage, water over flow, Airlock leakage on holiday and after 5 PM till 9 AM everyday will also be the responsibility of contractor. For the same adequate tradesman and helper of lack type etc will be made available in each complaint cell by the contractor.
(d) All above aspects shall deemed to have been included in the quoted price by the contractor. (e) Recovery on non wearing of uniform :- The employee and labourers engaged by the contractor under this contract shall wear neat and clean uniforms as approved by Engineer-in-Charge along with name badges, else recovery shall be made @ Rs 100/- per person per day. (f) The quoted rates shall be deemed to be included of all provisions mentioned above. The decision of accepting officer in this regard shall be final and binding and without prejudice to all. No claim/representation shall be entertained in the subject matter.
-
-
-
... More
Notes- Applicable for all items:- (g) Cost of T&P (Incl Ladders) , misc sundry materials , Labours , dresses for labours ,& other safety gears as required shall be deemed to be included in the quoted rates by the contractor for the respective items.
(h) The adequet no of workers as required per day to address the day to day maintenance works shall be deployed by contractor.
(a) Highly Skilled Plumber/Pipe Fitter (b) Highly Skilled Carpenter (c) Mazdoor/Helper for Pipe Fitter & Carp -
(d) Highly Skilled Mason with one Helper - (As & when required) (e) Highly Skilled Welder with one Helper - (As & when required) (f) Highly Skilled Electrician (g) sewer man
-
-
-
... More
Cleaning and removing all scale and dirt, etc, from tanks exc 250 but n exc 500 litres cacpacity and from mouths of circulating pipes, etc., complete all as directed.
70
-
-
... More
Cleaning and removing all scale and dirt, etc, from tanks exc 500 but n exc 1000 litres cacpacity and from mouths of circulating pipes, etc, complete all as directed.
30
-
-
... More
S&F in replacement Toilet paper holder with flap recessed type of stainless steel Complete all as specified and directed.
5
-
-
... More
S&F in replacement Bib taps for 15mm bore dia pipe, cast copper alloy cromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
80
-
-
... More
M&L in replacement 15 mm stop valve (concealed type cromium plated, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions and fixed complete all as specified and directed.
2
-
-
... More
M&L in replacement 20 mm dia gun metal gate valve, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions, complete all as specified and directed.
10
-
-
... More
M&L in replacement 25 mm dia gun metal gate valve, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions, complete all as specified and directed.
3
-
-
... More
S&F in replacement stop/angle valve, cast copper alloy , chromium plated fancy type, suitable for 15 mm bore tubing, complete all as specified & directed.
80
-
-
... More
S&F in replacement Pillar taps(long nose), cast copper alloy chromium plated 15 mm bore, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified & directed
30
-
-
... More
S&F in replacement Central hole basin mixture, cast copper alloy chromium plated fancy type, suitable for 15 mm bore tubing, complete all as specified & directed.
3
-
-
... More
S&F in replacement Mixing valve (wall Mixer) 3 in 1 with flexible tube & hand shower chromium plated fancy type brass, 15 mm bore, complete all as specified & directed
2
-
-
... More
S&F in replacement PVC connection 15 mm bore of length 450 mm , complete all as specified & directed
50
-
-
... More
S&F in replacement PVC connection 15 mm bore of length 600 mm, complete all as specified & directed
60
-
-
... More
S&F in replacement PVC Flexible waste pipe 32 mm to 40 mm dia with socket for steel sink/WHB upto floor level and length not less than 0.85 Mtr, complete all as specified & directed
100
-
-
... More
S&F in replacement PVC flushing cistern 10 Ltr Capacity including Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, complete all as specified & directed
20
-
-
... More
S&F in replacement CP waste coupling 40 mm size with rubber gasket etc for SS sink, complete all as specified & directed
10
-
-
... More
S&F in replacement CP waste coupling 32 mm size with rubber gasket etc for WHB etc , complete all as specified & directed
30
-
-
... More
S&F in replacement Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union, complete all as specified & directed .
10
-
-
... More
S&F in replacement stainless steel towel ring, complete all as specified & directed by Engr-in-Charge.
5
-
-
... More
S&F looking mirror (borderless) (Brand-I) fancy type fixed with suitable number of stainless steel cup screws (Minimum 4 Nos) complete all as spefified & directed by Engr-in-Charge.
5
-
-
... More
S&F in replacement stainless steel shop dish, complete all as specified & directed
10
-
-
... More
S&F in replacement PTMT body Ball cock /Float Valve 15 mm bore with epoxy coated Aluminum rod & HDPE Ball complete all as specified .
20
-
-
... More
S&F in replacement PTMT body Ball cock /Float Valve 20 mm bore with epoxy coated Aluminum rod & HDPE Ball complete all as specified .
60
-
-
... More
S&F in replacement PTMT body Ball cock /Float Valve 25 mm bore with epoxy coated Aluminum rod & HDPE Ball complete all as directed & specified .
5
-
-
... More
S&F in replacement HDPE flush pipe 32 mm dia of flush cistern to WC complete all as specified.
10
-
-
... More
S&F in replacement GI Nipple 20 mm bore 75mm long for tank connection complete all as specified and directed.
10
-
-
... More
S&F in replacement GI Nipple 25 mm bore 75mm long for tank connection complete all as specified and directed.
5
-
-
... More
S&F in replacement health faucet, fancy type, chromium plated cast copper alloy, with 1200 mm long flexible SS tube with wall hook complete all as specified and as directed and approved by Engineer- in-charge.
10
-
-
... More
S&F in replacement SS, chromium plated, hygeine wash Jet spray assembly with 1200 mm long flexible tube complete all as specified and directed.
6
-
-
... More
S&F in replacement 15 mm bore angle cock, two way, fancy type, chromium plated brass, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
5
-
-
... More
S&F in replacement 15 mm bore bib taps, two way, fancy type, chromium plated brass, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
2
-
-
... More
S&F in replacement 600mmx450mm bevelled edge mirror of selected quality glass 5.5 mm thick, mounted on 6mm thick AC/PVC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
20
-
-
... More
S&F in replacement Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as per sample complete all as specified and directed.
10
-
-
... More
S&F in replacement Shelf of PTMT fixed with and including Chromium plated brass screws and
wooden/plastic cleats (Minimum weight 300gms) all as per sample
5
-
-
... More
S&F in replacement Sheet glass shelf assembly consisting of 6-8 mm thick sheet glass shelf 10-15cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
5
-
-
... More
S&F in replacement Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
6
-
-
... More
S&F in replacement 125mm dia CP Grating with or without hole (for waste Pipe) complete all as specified and directed.
20
-
-
... More
S&F in replacement Vitreous China wash hand basin size 550x400 mm size with pedestal with a pair of brackets, waste pipe, waste coupling complete all as specified and directed.
2
-
-
... More
S&F in replacement Vitreous China wash hand basin size 550x400 mm size with a pair of brackets, waste pipe, waste coupling complete all as specified and directed.
6
-
-
... More
S&F in replacement vitreous China squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests complete all as specified and directed.
8
-
-
... More
S&F in replacement Stainless steel sink with draining board, made out of 1.00mm thick SS sheet for kitchen or laboratory with plug, washers waste pipe, cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
3
-
-
... More
S&F in replacement sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
2
-
-
... More
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
110
-
-
... More
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
90
-
-
... More
Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
15
-
-
... More
S &F 15 mm bore GI tubing medium grade including all connected fittings as elbow., socket , nipple etc including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.
80
-
-
... More
S&F 20 mm bore GI tubing medium grade including all connected fittings as elbow., socket , nipple etc complete all as specified and directed.
50
-
-
... More
S&F 25 mm bore GI tubing medium grade including all connected fittings as elbow., socket , nipple etc complete all as specified and directed.
10
-
-
... More
Refixing old GI water tubing of 15 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.
30
-
-
... More
Refixing old GI water tubing of 20 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.
40
-
-
... More
Refixing old GI water tubing of 25 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.
5
-
-
... More
S&F in replacement sink cock , cast copper alloy, fancy type, chromium plated suitable for 15 mm bore pipe complete all as specified and directed.
5
-
-
... More
Attending complaints of leaking/unsrevicable ,low level flushing cistern, PVC or chinaware for making it fully functional and leak proof by replacement the defective parts such as rubber washers , PVC levers,PVC/CP knobs if required complete all as directed and specified.
60
-
-
... More
Attending complaints of internal water supply pipes, fittings and bottle traps for removing of blockages etc of any description incl removing & cleaning of air locks etc. by pressure pump or any other means incl taking down and refixing of pipes & fitting and replacing old unserviciable pipes and fitting with new ones in any dia of pipe complete all as specified and as directed. This item includes minor repair items as change of GI socket, elbow or T etc as reqd all as specified & directed at site . Note: New GI pipes replaced if any shall be measured and paid under respective item of this schedule as S&F.
80
-
-
... More
Attending complaints of leaking/unservicable and petty repair to leaking bib taps , pillar taps, stop cock , angle valve ,wall mixture,WHB mixture,bib taps,two way bib taps, , etc of any description incl change of Rubber washer /Jumper sheet etc complete ( all items as washers , spindles , Rubber washer /Jumper sheet etc are included and would not be paid seprately.)
350
-
-
... More
S&F in replacement 500 litres capacity rotational moulded polythene water storage tanks white colour, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, including dismantling of old U/S PVC/RCC water tank & removing to store or outside MD land or credit to contractor, complete all as specified and as directed.
10
-
-
... More
All as per item No. 57.00 here-in-above, but tank capacity is 1000 ltrs
10
-
-
... More
S&F in replacement Tank cover (lid) for 500 liter /1000 liter water storage tank complete all as specified and directed by Engineer-In-Charge.
50
-
-
... More
S&F in replacement vitreous china wash down water closet (Pedestal pattern EWC) one piece, coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified and directed.
2
-
-
... More
S&F in replacement vitreous china wash down water closet EWC, floor mounted coupled with closet, including connection to drain (or outgoing pipe), including WC seat cover closed pattern with flat bottom and necessary fittings complete all as specified and directed.
2
-
-
... More
S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)
6
-
-
... More
S&F in repair Vitreous China bowl urinal flat back, full stall, with grating, spreader, waste pipe and union for discharge pipe complete all as specified
3
-
-
... More
Dismantling of cast iron of CI / PVC soil, waste & vent pipe jointed in cement mortar of size 75/ 110/100 mm bore, including all fittings, complete all as directed
65
-
-
... More
S & F PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints, laid in trenches/ floor or in fixed in wall, securing with clamp including all fitting etc tee, socket, bend complete all as specified and directed.
20
-
-
... More
S & F PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints, fixed on wall including, securing with clamp including all fitting etc tee, socket, bend, complete all as specified and directed.
10
-
-
... More
M&L for 75 mm Cast iron soil, sand cast pipe , waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including all fitting etc tee, socket, bend complete all as specified
10
-
-
... More
M&L for 100 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including all fitting etc tee, socket, bend, complete all as specified and directed.
5
-
-
... More
M&L for 75 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, fixed in walls including all fitting etc tee, socket, bend, complete all as specified and directed.
40
-
-
... More
M&L for 100 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, fixed in walls including all fitting etc tee, socket, bend, complete all as specified and directed.
40
-
-
... More
S&F in replacement PVC SWR bends of 110 mm bore, complete all as specified and directed.
5
-
-
... More
S&F in replacement PVC SWR bends of 75 mm bore, complete all as specified and directed.
5
-
-
... More
S&F in replacement PVC SWR tee of 75 mm bore, complete all as specified and directed.
1
-
-
... More
S&F in replacement Cast iron 100 mm vent cowl, complete all as specified and directed.
3
-
-
... More
M&L in replacement 75 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.
5
-
-
... More
S&F in replacement for Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110/ 75 mm bore pipe, complete all as specified and directed.
10
-
-
... More
Taking down of cement plaster from brick walls/ stone walls etc. of any description including racking out joints, hacking for key, scrubbing down with water etc and M&L for 15mm thick rendering in cement mortar (1:6) on stone masonary surfaces , finished even and smooth without using extra cement, complete all as specified and as directed.
450
-
-
... More
Taking down of cement plaster from ceiling/RCC roof projection/chajja/ facia/ lintel etc. of any description including racking out joints, hacking for key, scrubbing down with water etc and M&L for 10mm thick rendering in cement mortar (1:4) , finished even and smooth without using extra cement, complete all as specified and as directed.
200
-
-
... More
M&L for preparation of new wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying two coats of oil bound distemper over and including M&L for 1 mm thick wall care putty on wall, complete all as specified and directed by Engr-in-Charge.
450
-
-
... More
M&L preperartion of newly plastered surfaces and applying three coat of white wash on RCC chajja/ facia, ceiling etc complete all as specified and directed.
50
-
-
... More
M&L preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified & directed
150
-
-
... More
Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises , complete all as specified & directed
167
-
-
... More
M&L for glazed colour ceramic tiles as per IS-13712 Grade II(a) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:4) complete all as specified and directed.
150
-
-
... More
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.
24.85
-
-
... More
M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes/sub base for sunken floor etc., complete all as specified and as directed.
40
-
-
... More
M&L for non skid ceramic coloured tiles of 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
50
-
-
... More
M&L for non skid ceramic coloured tiles of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
150
-
-
... More
All as item no. 87.00 here-in-above but as in skirting including 10mm thick backing coat on stone masonry surfacs in CM 1:4 complete all as specified
2
-
-
... More
M&L for double charged / dark shade vitrified ceramic tiles, 10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 sqm, (size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
350
-
-
... More
All as item no. 89.00 here-in-above but as in skirting including 10mm thick backing coat on stone masonry surfacs in CM 1:4 complete all as specified
15
-
-
... More
M&L for 18 to 20 mm thick (telephone black shade) granite stone, as in steps (Single piece), jambs, pillars, window-cills, cooking platforms , oval type WHB counter, sink & etc. machine cut, (table rubbed and polished) best quality as per sample, including & over 15 mm thick screeding in CM 1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.
5
-
-
... More
M&L of 20-25mm thick machine cut KOTA stone slab as in shelves (Single piece) fixed in walls machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing all as specified.
5
-
-
... More
M&L for machine cut pre polished kota stone slab 20 to 25mm thick in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.
50
-
-
... More
M&L for machine cut pre-polished kota stone slab 20 to 25mm thick as in risers (Single piece) , dado, steps (Single piece) , tread (Single piece) , skirting & etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10mm thick screed bed in CM 1:4, complete all as specified and as directed.
3
-
-
... More
M&L 40 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring/hard standing laid in alternative bays using glass dividing strips including finishing cement concrete surface even and smooth without using extra cement complete all as specified & as directed.
10
-
-
... More
M&L 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.
90
-
-
... More
M&L 100 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base as in floor complete all as specified and as directed .
550
-
-
... More
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block (rubberised finish) of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified
550
-
-
... More
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block (rubberised finish) of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified
300
-
-
... More
M&L for Solid PVC Wall Lining consisting of 5mm thick wood grain colour PVC sheet inclusive of solvent cement and fixing at site over and including PVC frame work of 5mm thick and 35mm width fixed on walls as per specifications and drawing
248
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified
3
-
-
... More
Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land complete all as specified
950
-
-
... More
M&L for roof treatement in the following stages :-(a) Applying evenly a coat of bituminous primer conforming to IS-3384 @ 0.40 ltr per sqm over and including 10 mm thick cement mortoar (1:4) and surfaces finished even and smooth without using extra cement all as specified . (b) Second coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg/Sqm . (c) Third layer of APP modified polmeric membrane centre core of 20 micron HMHDPE outer film 20 micron both sides thickness 1.5 mm having weight 2.25 Kg/Sqm. (d) Fourth coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg per Sqm. (e) 40mm thick PCC padding in cement concrete 1:2:4 (12.5 mm graded aggregate finishing even and smooth complete all as specified
550
-
-
... More
Preparing & cleaning roof top surface with steel wire brushing, filling cracks with crack seal and M&L for 15mm thick cement mortar 1:4 on roof surfaces and applying (a) first coat of damp proof with mixing of water as per manufactures specification (b) second coat of damp proof without adding water or as per manufactures specification complete all as specified and directed by Engineer-In-Charge. Note : (i) Quated rate shall be deemed to be included for the work in building/ structure of any height. (ii) The procurement of material and execution of the work of water proofing treatment shall be got executed from one of the manufacturers approved by GE : M/S Asian paints Ltd (Damp proof ultra) or equivalent
400
-
-
... More
Supply only integral water proofing compound (ISI marked).
40
-
-
... More
M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings,levelling course, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete
1
-
-
... More
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for and complete removal to debris outside the defence land or low laying area complete all as specified and directed by Engineer-In-Charge
81.25
-
-
... More
M&L for 35mm thick pre-cast cement concrete louvres and jallies (measured solid) in cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate including all moulding and set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
30
-
-
... More
M&L for precast cement concrete Post in 1:3:6 type C1 using 20mm graded stone aggregate set in CM 1:4 complete all as specified and directed by Engineer-In-Charge.
0.2
-
-
... More
Demolition of stone masonry /block walling built in cement mortar complete all as specified and directed.
27
-
-
... More
M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.
20
-
-
... More
Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified
40
-
-
... More
M&L for precast cement concrete solid building blocks type B1 1:2:4 (20mm graded stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:6 cement mortar, complete, in walls complete all as specified
20
-
-
... More
M&L for Pre-cast cement concrete block masonry with solid blocks, type B1 1:2:4 (20mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.
5
-
-
... More
S&F in replacement stainless steel plate rack of size 30"x24"x10" size as per trade pattern fabricated with 0.50mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings complete all as per sample .
10
-
-
... More
S&F in replacement Decorative type curtain rod stainless steel finish MS pipe 22 to 25 mm dia as per sample superior quality complete and incl brackets and Decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for holding & end cover complete all as specified and as directed
200
-
-
... More
S&F in replacement PVC Cabinet mirror of size ( 355mmx 455mm ) of selected quality glass and fixed to plugs with chromium plated brass screws and cup washers complete all as specified and directed.
4
-
-
... More
Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area not exc 1.5 sqm each complete.
10
-
-
... More
Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area exc 1.5 sqm but not exc. 4 Sqm each complete.
22
-
-
... More
Taking down shutter of any description area exc 1 Sqm but n. exc 2 Sqm each complete.
10
-
-
... More
Taking down steel windows / ventilator with frame of any description and any size complete
10
-
-
... More
S&F solid PVC door frame(wooden finish) of size 50mmx47mm made out of 5mm wooden colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawings complete all as specified
45
-
-
... More
S&F Factory made solid panel PVC moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wooden colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wooden colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wooden colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified
14.8
-
-
... More
M&L for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410W (Gde-E-250) quality 'A' complete all as specified and directed.
90
-
-
... More
S&F 2nd class hard wood plain framed paneled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board upto commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated (Factory made shutters) complete all as specified
18.6
-
-
... More
S&F 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc divided into squares by Rails and styles , with plain chamfered or rounded mitered and rebated size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified
18.6
-
-
... More
S&F of factory made steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, with or without cooler opening, complete with glazing bars, dovetailed or welded complete all as specified
5.57
-
-
... More
All as per item No. 127.00 here-in-above but without glazing bars
5.57
-
-
... More
S&F factory made Steel ventilator with top hung shutters with glazed bars including hinges steel peg stay etc complete all as specified and directed by Engr-in-Charge.
2.16
-
-
... More
M&L for framed work such as grills, gratings, cooler stand etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
80
-
-
... More
S & F galvanised MS wire cloth 0.56 mm nominal dia of wire & 1.18 mm average width of apperture fixed complete all as directed & specified.
11.16
-
-
... More
S&F in replacement galvanised mild steel wire cloth 0.56mmm nominal dia of wire and average width of aperature 1.18mm complete all as specified
20
-
-
... More
S&F of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,Both face is covered with decorative face veneer with lipping/frame to match
3.4
-
-
... More
Dismantling of cast iron drain pipes (internal dia of pipe 75mm), jointed in cement
mortar and taking out of trenches & walls complete all as specified.
60
-
-
... More
S&F 100mm size SS butt hinges (ISI Marked) complete all as specified and directed.
30
-
-
... More
S&F 300mm long Mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on tapple plate and fixed complete all as specified and directed.
12
-
-
... More
S&F 200mm MS barral tower bolts stove enamelled black with bright bolt complete all as specified and directed.
44
-
-
... More
S&F in replacement 200mm MS barral tower bolts stove enamelled black with bright bolt complete all as specified and directed.
10
-
-
... More
S&F 150mm MS pressed handle oval type stove enamelled black complete all as specified and directed.
44
-
-
... More
S&F in replacement, 150mm MS pressed handle oval type stove enamelled black complete all as specified and directed.
15
-
-
... More
S&F in replacement 140 mm size best quality Floor door stopper of aluminium alloy body and tongue, anodised & hard rubber shoe complete all as specified and directed.
15
-
-
... More
M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
78.12
-
-
... More
S&F solar control film of 25 micron reflective type sticked with glass as per manufacturer instuction in any size in each pane
18
-
-
... More
S&F in replacement Aluminium Anodised extruded section ISI Marked tower bolt of size 200 mm complete all as specified and directed.
25
-
-
... More
S&F in replacement Anodised aluminium extruded section ISI marked door handles size 150 mm complete all as specified and directed.
30
-
-
... More
S&F in replacement MS sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a mini of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed.
5
-
-
... More
S&F in replacement mild steel 300mm ordinary rat tail rod pattern spring incl roller and roller plat complete all as specified and directed.
5
-
-
... More
S&F in replacement Mild Steel Butt hinges medium weight cold rolled 100mm size complete all as specified and directed.
30
-
-
... More
S&F in replacement Stainless Steel medium weight 100mm size Butt hinges complete all as specified and directed.
20
-
-
... More
S&F in replacement Mild steel body single action door spring hinge size 100 mm complete all as specified and directed.
15
-
-
... More
S&F in replacement cast iron body door closer hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
5
-
-
... More
S&F in replacement Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
2
-
-
... More
S&F in replacement 40mm dia cupboard knobs fixed the screw and washer of MS bright finished complete all as specified and directed.
5
-
-
... More
S&F in replacement Mild steel body peg stays 250 mm long (minimum) to steel windows & vents complete all as specified and directed.
30
-
-
... More
S&F in replacement Mild steel body window handles (Left or right) any size to steel windows & vents complete all as specified and directed.
80
-
-
... More
S&F in replacement Door seal as per trade pattern with powder coated aluminium strip 25-30 mm width having suitable dia holes (for fixing screws) & synthetic strip at bottom to avoid entry of dust etc fixed complete all as specified and directed.
20
-
-
... More
Hacking out old broken glass any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.
80
-
-
... More
S & F 3mm thick Plain sheet glass ordinary quality and glazing with oil putty in sqaure panes cut to size required, area not exc 0.50 sqm in each pane complete all as specified and directed.
60
-
-
... More
S & F 4mm thick figured glass pin headed type, ordinary quality and glazing with oil putty in sqaure area not exc 0.50 sqm in each pane complete all as specified & directed.
20
-
-
... More
S & F in repairs 18 mm thick prelaminated particle board exterior grade with decorative choice laminations on one side & the other balancing white complete all as specified & directed.
5
-
-
... More
Supply & fix continuous paino hinges 40 mm width of flap mild steel body electro galvanised finish all as directed & specified.
2
-
-
... More
S&F of 100 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws
2
-
-
... More
Resucuring /easing and adjusting shutters without taking down of any description and in any position area exc 1 sqm but n exc 2 sqm complete all as specified.
20
-
-
... More
Resucuring /easing and adjusting to steel windows / vents incl necessary welding rivetting etc.,complete all as specified and directed.
8
-
-
... More
S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (min thickness of powder coating 50 micron)
71
-
-
... More
S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. (min thickness of powder coating 50 micron) complete all as specified and directed.
15.74
-
-
... More
S&F power coated Anodised aluminium window and ventilator shutters(Thickness of powder coating not less than 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
12
-
-
... More
S&F 5.5mm thick Sheet glass ordinary quality glass and glazing in any size in each pane, complete all as specified and directed.
18
-
-
... More
S&F Anodised aluminium powder coated decogrill for doors, windows ventilators with one or more rebates including joining cleat for fixing etc.,complete all as specified and directed.
15
-
-
... More
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
12
-
-
... More
S & F in replacement steel rolling shutters,1.00 mm thick with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; but gear operated type with bevel gear box and crank handle complete all as specified.
5
-
-
... More
S & F Ball bearing for rolling shutters complete all as specified.
4
-
-
... More
S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified.
2
-
-
... More
S&F in replacement brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified and directed.
4
-
-
... More
Repair to joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repair such as tightening of screws/nails, minor adjustment of joinery, door etc. including petty repair material like screws/nails, plug etc. to make it functional complete all as specified and directed.
150
-
-
... More
Taking down carefully anodized aluminium door frame including glazed shutters & builder’s hardware complete of any size & any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified.
Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed.
(ii) Glazing, new aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately.
(iii) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º.
20
-
-
... More
M&L running welding in repair, thickness of metal to be welded not exc 6mm complete all as specified and directed.
20
-
-
... More
Supplying and fixing in replacement factory made PVC shutter of 18 mm thickness consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density with prelaminated sheet on one side cut in desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.The measured area shall be front elevation.
10
-
-
... More
Supplying and fixing in replacement factory made PVC shutter of 18 mm thickness consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density manufactured by an ISO 9000 certified company using for shutter celluca ply 18 mm thick cut in desired size of shutter and fixed with frame of kitchen accessory/cubboard at all four edges of shutter using 13/6 size self tapping steel screws. below cooking platform The thickness of the shutter is edfe painted by matching colour of PVC ink of plain colour of PVC sheet using complete all as specified and directed by Engineer-in-Charge. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.The measured area shall be front elevation.
5
-
-
... More
S&F Brass magic eye for door shutter etc. complete all as specified and directed.
5
-
-
... More
Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete all as specified and directed.
250
-
-
... More
M&L for fixing MS 12 mm dia TMT bars by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc complete all as specified and directed.
30
-
-
... More
M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 or equivalent to remove the loose rust particles etc & throughly cleaning the surface complete all as specified and directed.
250
-
-
... More
M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack complete all as specified and directed.
250
-
-
... More
M&L for 15 -20 mm thick rendering in CM 1:1:2 using 1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER or equivalent admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat complete all as specified and directed.
250
-
-
... More
M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth without using extra cement complete all as specified and directed.
150
-
-
... More
M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER or equivalent admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as specified and directed.
100
-
-
... More
M&L for providing steel scaffolding & formwork etc for supporting RCC Slabs etc for carrying out the rehabilitation works complete all as specified & directed . Note:- The steel scaffolding & formwork etc catered for in the items above is for supporting the RCC members during the period of their structural rehabilitation. The scaffolding & formwork shall not be removed until the RCC members have gained sufficient strength. The decision of GE shall be final conslusive & binding in respect of the extent to which the formwork is to be provided & time of its removal.
20
-
-
... More
M&L for providing steel scaffolding & formwork etc for supporting RCC Beams etc for carrying out the rehabilitation works complete all as specified & directed . Note:- The steel scaffolding & formwork etc catered for in the items above is for supporting the RCC members during the period of their structural rehabilitation. The scaffolding & formwork shall not be removed until the RCC members have gained sufficient strength. The decision of GE shall be final conslusive & binding in respect of the extent to which the formwork is to be provided & time of its removal.
10
-
-
... More
Makeup lost steel area due to corrosion by providing additional steel reinforcement, confirming to IS 1786:1786-2008, having a minimum yield strength of 500 N/mm2. Anchor the steel rebar in sound concrete body up to desired depth by structural GRADE pure Polyester resin based cartridge filled and applied adhesive like LockFix of FOSROC or equivalent of Dr. Fixit/BASF/ PIDILITE. Fixing of rebars is to be with pre left binding wires with existing steel at regular grid after aligning concrete profile with new mortar up to existing steel face.
200
-
-
... More
M&L for Drilling holes for pressure grouting of 25 mm dia., 50 to 75 mm deep in RCC structural members at the intervals of 350 mm in staggered manner or as directed by Engineer-in-charge, cleaning of holes by air blower prior to fixing nozzles, fixing Teflon perforated nozzles in RCC members in cleaned holes by applying thixotropic epoxy mortar to ensure complete sealing and cutting of nozzles by chisel after completion of grouting without damaging structural elements and Application of the products shall be by manufacturer’s authorized applicator and as per manufacturer's specifications.
60
-
-
... More
Supplying and injecting Low viscous epoxy injection resin for crack injection grouting with (Conbextra EP10 of FOSROC or equivalent) of Dr. Fixit/BASF/ PIDILITE having Flexural strength of 40N/mm² in 7 days and Compressive strength of 45N/mm² in 1 day, by pressure and using injector with accessories till nozzles refused to accept the grout, all tools and materials complete and as directed by the Engineer-in-charge. Application of the products shall be carried out by manufacturer’s authorized applicator and as per manufacturer's specifications.
30
-
-
... More
M&L for Providing and jacketing the distressed concrete elements in patches using Single component, shrinkage controlled, polymer modified cementitious micro concrete such as Rendrock LAxtra of Fosroc make or equivalent that achieves a compressive strength of 35 MPa in 3 days (BS 1881), Flexural Strength 09 MPa at 28 days as per BS 6319 Pt-3, Tensile Strength 3.5MPa in 28days as per BS 6319 Pt-7,by “Form & Pour” method inclusive of Manpower, Material and Equipment. Note:- The quoted rate shall be inclusive of providing necessary formwork all as specified & directed.
0.9
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
33.33
-
-
... More
M&L prefabricated, pre reinforced, 600mm dia POP moulded desiner circle dooms fixed on ceiling/wall complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
M&L Cement concrete in foundations, filling and mass-concrete Type B2 1:2:4 (40 mm graded aggregate) complete all as specified and directed
4
-
-
... More
M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde E-250) quality A, complete all as specified and directed
3333.3
-
-
... More
M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed
111.4
-
-
... More
Dismantling of plain or corrugated steel sheeting any guage, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed
508.5
-
-
... More
S&F Pre-laminated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as, complete all as specified and directed
500
-
-
... More
S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed
8.5
-
-
... More
Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc)/ wall panelling including frame work or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed
368
-
-
... More
S&F 18-19 mm thick Fissured board false ceiling system with ULTIMA RH99 board (regular) or equivalent mineral fiber acoustical suspended ceiling system, board size shall be 600mm X 600mm over and including Anodised aluminium snap grid (powder coated ) frame work for false ceiling all as specified ( Size of grid 605 x 605mm). The aluminium snap grid, tee section, L section , Hooks , wire assembly, anchor fasterners, (a) Size of main Tee & cross Tee -39 X24.7 X 0.80mm (b) Size of wall angle - 22.20 X 22.20X 0.65 mm, complete all as specified and directed
110
-
-
... More
M&L for 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including Gl frame work (Size of grid 605 x 605mm) for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed
10
-
-
... More
M&L prefabricated, 75mm wide POP moulded cornices, moulding fixed on ceiling/wall complete all as specified and directed.
2
-
-
... More
M&L for 25 to 30mm Jodhpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade - 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment, complete all as specified and directed
50
-
-
... More
Resecuring /easing and adjusting shutters without taking down of any description and in any position area n exc 1 sqm complete all as specified.
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%