Military Engineer Services Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 50,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_684991_1Bid Award Id
ViewTender No
CWE/HSR/ALW/45 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://defproc.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Removing unserviceable front rail and S & F the new wooden front rail in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable rear rail and S & F the new wooden rear rail in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable side rail and S & F the new wooden side rail in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable front frame of seat frame and S & F the new wooden front frame of seat in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable rear frame of seat frame and S & F the new wooden rear frame of seat in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable side frame of seat frame and S & F the new wooden side frame of seat in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable top frame of back frame and S & F the new wooden top frame of back frame in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable bottom frame of back frame and S & F the new wooden bottom frame of back frame in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable side frame of back frame and S & F the new wooden side frame of back frame in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable canning of seat and S & F the new canning of seat using polyethylene cane of Type-I as per IS 5378: 1994, 2 mm (width) X 0.40 mm (thick) polyethylene cane for seat and 3.5 mm (width) X 0.50 mm (thick) polyethylene cane for border, weaved in pre-woven pattern in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
75
-
-
... More
Removing unserviceable canning of back and S & F the new canning of back using polyethylene cane of Type-I as per IS 5378: 1994, 2 mm (width) X 0.40 mm (thick) polyethylene cane for back and 3.5 mm (width) X 0.50 mm (thick) polyethylene cane for border, weaved in pre-woven pattern in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
75
-
-
... More
Removing unserviceable PVC ring and S & F the new PVC ring in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
300
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (chair easy) as per drawing No: FD-201 complete all as specified and as directed.
150
-
-
... More
Removing unserviceable front leg and S & F the new wooden front leg in the furniture (chair writing) as per drawing No: FD-202 complete all as specified and as directed.
28
-
-
... More
Removing unserviceable rear leg and S & F the new wooden rear leg in the furniture (chair writing) as per drawing No: FD-202 complete all as specified and as directed.
28
-
-
... More
Removing unserviceable bottom wooden stiffener between stiffeners and S & F the new bottom wooden stiffener between stiffeners in the furniture (chair writing) as per drawing No: FD-202 complete all as specified and as directed.
33
-
-
... More
Removing unserviceable bottom wooden stiffener of leg and S & F the new bottom wooden stiffener of leg in the furniture (chair writing) as per drawing No: FD-202 complete all as specified and as directed.
35
-
-
... More
Removing unserviceable canning of seat and S & F the new canning of seat using polyethylene cane of Type-I as per IS 5378: 1994, 2 mm (width) X 0.40 mm (thick) polyethylene cane for seat and 3.5 mm (width) X 0.50 mm (thick) polyethylene cane for border, weaved in pre-woven pattern in the furniture (chair writing) as per drawing No: FD-202 complete all as specified and as directed.
125
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (chair writing) as per drawing No: FD-202 complete all as specified and as directed.
125
-
-
... More
Removing unserviceable PVC ring and S & F the new PVC ring in the furniture (chair writing) as per drawing No: FD-202 complete all as specified and as directed.
250
-
-
... More
Removing unserviceable wooden leg and S & F the new wooden leg in the furniture (Table 900 X 600 (For Havs & Ors)) as per drawing No: FD-223 complete all as specified and as directed.
15
-
-
... More
Removing unserviceable wooden stiffener of leg and S & F the new wooden stiffener of leg in the furniture (Table 900 X 600 (For Havs & Ors)) as per drawing No: FD-223 complete all as specified and as directed.
5
-
-
... More
Removing unserviceable wooden stiffener between stiffeners and S & F the new wooden stiffener between stiffeners in the furniture (Table 900 X 600 (For Havs & Ors)) as per drawing No: FD-223 complete all as specified and as directed.
5
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table 900 X 600 (For Havs & Ors)) as per drawing No: FD-223 complete all as specified and as directed.
62
-
-
... More
Removing unserviceable front leg and S & F the new front leg in the furniture (chair dining) as per drawing No: FD-228 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable rear leg and S & F the new rear leg in the furniture (chair dining) as per drawing No: FD-228 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable bottom wooden stiffener between stiffeners and S & F the new bottom wooden stiffener between stiffeners in the furniture (chair dining) as per drawing No: FD-228 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable bottom wooden stiffener of leg and S & F the new bottom wooden stiffener of leg in the furniture (chair dining) as per drawing No: FD-228 complete all as specified and as directed.
75
-
-
... More
Removing unserviceable front rail of seat and S & F the new front rail of seat in the furniture (chair dining) as per drawing No: FD-228 complete all as specified and as directed.
63
-
-
... More
Removing unserviceable rear rail of seat and S & F the new rear rail of seat in the furniture (chair dining) as per drawing No: FD-228 complete all as specified and as directed.
63
-
-
... More
Removing unserviceable side rail of seat and S & F the side rail of seat in the furniture (chair dining) as per drawing No: FD-228 complete all as specified and as directed.
63
-
-
... More
Removing unserviceable canning of seat and S & F the new canning of seat using polyethylene cane of Type-I as per IS 5378: 1994, 2 mm (width) X 0.40 mm (thick) polyethylene cane for seat and 3.5 mm (width) X 0.50 mm (thick) polyethylene cane for border, weaved in pre-woven pattern in the furniture (chair dining) as per drawing No: FD-228 complete all as specified and as directed.
750
-
-
... More
Removing unserviceable PVC ring and S & F the new PVC ring in the furniture (chair dining) as per drawing No: FD-228 complete all as specified and as directed.
1500
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (chair dining) as per drawing No: FD-228 complete all as specified and as directed.
750
-
-
... More
Removing unserviceable front leg and S & F the new wooden front leg in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable rear leg and S & F the new wooden rear leg in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable armrest and S & F the new wooden armrest in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable front rail and S & F the new wooden front rail in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable rear rail and S & F the new wooden rear rail in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable side rail and S & F the new wooden side rail in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable front frame of seat frame and S & F the new wooden front frame of seat in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable rear frame of seat frame and S & F the new wooden rear frame of seat in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable side frame of seat frame and S & F the new wooden side frame of seat in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable top frame of back frame and S & F the new wooden top frame of back frame in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable bottom frame of back frame and S & F the new wooden bottom frame of back frame in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable side frame of back frame and S & F the new wooden side frame of back frame in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
7
-
-
... More
Removing unserviceable canning of seat and S & F the new canning of seat using polyethylene cane of Type-I as per IS 5378: 1994, 2 mm (width) X 0.40 mm (thick) polyethylene cane for seat and 3.5 mm (width) X 0.50 mm (thick) polyethylene cane for border, weaved in pre-woven pattern in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
75
-
-
... More
Removing unserviceable canning of back and S & F the new canning of back using polyethylene cane of Type-I as per IS 5378: 1994, 2 mm (width) X 0.40 mm (thick) polyethylene cane for back and 3.5 mm (width) X 0.50 mm (thick) polyethylene cane for border, weaved in pre-woven pattern in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
75
-
-
... More
Removing unserviceable PVC ring and S & F the new PVC ring in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
300
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (chair easy) as per drawing No: FD-229 complete all as specified and as directed.
150
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Peg Table) as per drawing No: FD-236 complete all as specified and as directed.
556
-
-
... More
Removing unserviceable wooden leg and S & F the new wooden leg in the furniture (Peg Table) as per drawing No: FD-236 complete all as specified and as directed.
320
-
-
... More
Removing unserviceable top wooden long rail and S & F the new top wooden long rail in the furniture (Peg Table) as per drawing No: FD-236 complete all as specified and as directed.
200
-
-
... More
Removing unserviceable top wooden short rail and S & F the new top wooden short rail in the furniture (Peg Table) as per drawing No: FD-236 complete all as specified and as directed.
200
-
-
... More
Removing unserviceable PVC ring and S & F the new PVC ring in the furniture (Peg Table) as per drawing No: FD-236 complete all as specified and as directed.
556
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (Peg Table) as per drawing No: FD-236 complete all as specified and as directed.
556
-
-
... More
Removing unserviceable stiffener and S & F the new wooden stiffener in the furniture (Side Board) as per drawing No: FD-241 complete all as specified and as directed.
22
-
-
... More
Removing unserviceable back and S & F the new plywood back made of 6 mm thick, 3 ply, BWR grade, AA type plywood as per IS 303: 2024 and IS 848: 2006 in the furniture (Side Board) as per drawing No: FD-241 complete all as specified and as directed.
21
-
-
... More
Removing unserviceable top panel and S & F the new top panel made of prelaminated particle board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type II (Designation PLB-12 or PLB-22), made out of medium density particle board (flat pressed-three layer or multilayer and graded (grade I or grade II), bonded with BWR adhesive PVC edge banding made from thermoplastic resin in the furniture (Side Board) as per drawing No: FD-241 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable side and middle panel and S & F the new side and middle panel made of prelaminated particle board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type II (Designation PLB-12 or PLB-22), made out of medium density particle board (flat pressed-three layer or multilayer and graded (grade I or grade II), bonded with BWR adhesive PVC edge banding made from thermoplastic resin in the furniture (Side Board) as per drawing No: FD-241 complete all as specified and as directed.
40
-
-
... More
Removing unserviceable shutter and S & F the new shutter made of prelaminated particle board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type II (Designation PLB-12 or PLB-22), made out of medium density particle board (flat pressed-three layer or multilayer and graded (grade I or grade II), bonded with BWR adhesive PVC edge banding made from thermoplastic resin in the furniture (Side Board) as per drawing No: FD-241 complete all as specified and as directed.
40
-
-
... More
Removing unserviceable large drawer and S & F the new large drawer made of prelaminated particle board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type II (Designation PLB-12 or PLB-22), made out of medium density particle board (flat pressed-three layer or multilayer and graded (grade I or grade II), bonded with BWR adhesive PVC edge banding made from thermoplastic resin in the furniture (Side Board) as per drawing No: FD-241 complete all as specified and as directed.
20
-
-
... More
Removing unserviceable small drawer and S & F the new small drawer made of prelaminated particle board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type II (Designation PLB-12 or PLB-22), made out of medium density particle board (flat pressed-three layer or multilayer and graded (grade I or grade II), bonded with BWR adhesive PVC edge banding made from thermoplastic resin in the furniture (Side Board) as per drawing No: FD-241 complete all as specified and as directed.
20
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (Side Board) as per drawing No: FD-241 complete all as specified and as directed.
20
-
-
... More
Removing unserviceable wooden stiffener and S & F the new wooden stiffener in the furniture (Bed Plywood Top with MNF set) as per drawing No: FD-246 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable wooden long rail and S & F the new wooden long rail in the furniture (Bed Plywood Top with MNF set) as per drawing No: FD-246 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable wooden short rail and S & F the new wooden short rail in the furniture (Bed Plywood Top with MNF set) as per drawing No: FD-246 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable wooden head board leg and S & F the new wooden head board leg in the furniture (Bed Plywood Top with MNF set) as per drawing No: FD-246 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable wooden foot board leg and S & F the new wooden foot board leg in the furniture (Bed Plywood Top with MNF set) as per drawing No: FD-246 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable wooden bracket and S & F the new wooden bracket in the furniture (Bed Plywood Top with MNF set) as per drawing No: FD-246 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable plywood top and S & F the new plywood top, 12 mm thick plywood, 5 ply, boiling water resistance (BWR) Grade, AA type as per IS 303: 2024 and IS 848: 2006 of size 2020 mm X 900 mm (single piece) in the furniture (Bed Plywood Top with MNF set) as per drawing No: FD-246 complete all as specified and as directed.
30
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (Bed Plywood Top with MNF set) as per drawing No: FD-246 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Bed Side) as per drawing No. FD-248 complete all as specified and as directed.
100
-
-
... More
Removing unserviceable bottom and S & F the new bottom made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Bed Side) as per drawing No. FD-248 complete all as specified and as directed.
100
-
-
... More
Removing unserviceable side and S & F the new side made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Bed Side) as per drawing No. FD-248 complete all as specified and as directed.
100
-
-
... More
Removing unserviceable shelf and S & F the new shelf made of prelaminated MDF board (decorative lamination on one shelf and other shelf balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Bed Side) as per drawing No. FD-248 complete all as specified and as directed.
100
-
-
... More
Removing unserviceable backing and S & F the new plywood backing made of 6 mm thick, 3 ply, BWR grade, AA type plywood as per IS 303: 2024 and IS 848: 2006 in the furniture (Table Bed Side) as per drawing No. FD-248 complete all as specified and as directed.
100
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (Table Bed Side) as per drawing No. FD-248 complete all as specified and as directed.
100
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Dressing Ladies) as per drawing No: FD-251 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable drawer and S & F the new drawer made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Side Board) as per drawing No: FD-241 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable backing and S & F the new plywood backing made of 12 mm thick, 5 ply, BWR grade, AA type plywood as per IS 303: 2024 and IS 848: 2006 in the furniture (Table Dressing Ladies) as per drawing No: FD-251 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable mirror frame and S & F the new mirror frame made of timber and 6 mm thick, 5 ply, decorative plywood with ornamental veneers on one side, boiling water proof (BWR) Grade and Type 1 as per IS 303: 2024, IS 1328: 1996 and IS 848: 2006 in the furniture (Table Dressing Ladies) as per drawing No: FD-251 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable mirror and S & F the new mirror made of 5.5 mm thick glass, AA Quality or Special Selected Quality ( SSQ ) as per IS 2835: 1987 and silvering, copper coating, protective coating, reflectance as per IS 3438: 1994 and coating by using electroplating in the furniture (Table Dressing Ladies) as per drawing No: FD-251 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable sliding glass and S & F the new sliding glass made of 5 mm thick glass, AA Quality or Special Selected Quality ( SSQ ) as per IS 2835: 1987 in the furniture (Table Dressing Ladies) as per drawing No: FD-251 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable wooden leg and S & F the new wooden leg in the furniture (Table Dining for 6/8 Persons) as per drawing No: FD-273 complete all as specified and as directed.
21
-
-
... More
Removing unserviceable top wooden short rail and S & F the new top wooden short rail in the furniture (Table Dining for 6/8 Persons) as per drawing No: FD-273 complete all as specified and as directed.
21
-
-
... More
Removing unserviceable top wooden long rail and S & F the new top wooden long rail in the furniture (Table Dining for 8 Persons) as per drawing No: FD-273 complete all as specified and as directed.
11
-
-
... More
Removing unserviceable top wooden long rail and S & F the new top wooden long rail in the furniture (Table Dining for 6 Persons) as per drawing No: FD-273 complete all as specified and as directed.
10
-
-
... More
Removing unserviceable PVC ring and S & F the new PVC ring in the furniture (Table Dining for 6/8 Persons) as per drawing No: FD-273 complete all as specified and as directed.
100
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated particle board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type II (Designation PLB-12 or PLB-22), made out of medium density particle board (flat pressed-three layer or multilayer and graded (grade I or grade II), bonded with BWR adhesive including 4 mm thick teak wood lipping/edging in the furniture (Table Dining for 8 Persons) as per drawing No: FD-273 complete all as specified and as directed.
10
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated particle board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type II (Designation PLB-12 or PLB-22), made out of medium density particle board (flat pressed-three layer or multilayer and graded (grade I or grade II), bonded with BWR adhesive including 4 mm thick teak wood lipping/edging in the furniture (Table Dining for 6 Persons) as per drawing No: FD-273 complete all as specified and as directed.
10
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Dining for 8 Persons) as per drawing No: FD-273 complete all as specified and as directed.
15
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Dining for 6 Persons) as per drawing No: FD-273 complete all as specified and as directed.
15
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (table dining 6 persons) as per drawing No: FD-273 complete all as specified and as directed.
25
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (table dining 8 persons) as per drawing No: FD-273 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable wooden leg and S & F the new wooden leg in the furniture (Table Writing) as per drawing No. FD-275 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable top wooden long rail and S & F the new top wooden long rail in the furniture (Table Writing) as per drawing No. FD-275 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable back and S & F the new plywood back made of 6 mm thick, 3 ply, BWR grade, AA type plywood as per IS 303: 2024 and IS 848: 2006 in the furniture (Table Writing) as per drawing No. FD-275 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Writing) as per drawing No. FD-275 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable PVC ring/shoe and S & F the new PVC ring/shoe in the furniture (Table Writing) as per drawing No. FD-275 complete all as specified and as directed.
100
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (Table Writing) as per drawing No. FD-275 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable front leg and S & F the new front leg in the furniture (chair dining) as per drawing No: FD-279 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable rear leg and S & F the new rear leg in the furniture (chair dining) as per drawing No: FD-279 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable bottom wooden stiffener between stiffeners and S & F the new bottom wooden stiffener between stiffeners in the furniture (chair dining) as per drawing No: FD-279 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable bottom wooden stiffener of leg and S & F the new bottom wooden stiffener of leg in the furniture (chair dining) as as per drawing No: FD-279 complete all as specified and as directed.
75
-
-
... More
Removing unserviceable front rail of seat and S & F the new front rail of seat in the furniture (chair dining) as per drawing No: FD-279 complete all as specified and as directed.
63
-
-
... More
Removing unserviceable rear rail of seat and S & F the new rear rail of seat in the furniture (chair dining) as per drawing No: FD-279 complete all as specified and as directed.
63
-
-
... More
Removing unserviceable sie rail of seat and S & F the new side rail of seat in the furniture (chair dining) as per drawing No: FD-279 complete all as specified and as directed.
63
-
-
... More
Removing unserviceable canning of seat and S & F the new canning of seat using polyethylene cane of Type-I as per IS 5378: 1994, 2 mm (width) X 0.40 mm (thick) polyethylene cane for seat and 3.5 mm (width) X 0.50 mm (thick) polyethylene cane for border, weaved in pre-woven pattern in the furniture (chair dining) as per drawing No: FD-279 complete all as specified and as directed.
750
-
-
... More
Removing unserviceable PVC ring and S & F the new PVC ring in the furniture (chair dining) as per drawing No: FD-279 complete all as specified and as directed.
1500
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (chair dining) as per drawing No: FD-279 complete all as specified and as directed.
750
-
-
... More
Removing unserviceable front leg and S & F the new wooden front leg in the furniture (chair writing) as per drawing No: FD-280 complete all as specified and as directed.
28
-
-
... More
Removing unserviceable rear leg and S & F the new wooden rear leg in the furniture (chair writing) as per drawing No: FD-280 complete all as specified and as directed.
28
-
-
... More
Removing unserviceable bottom wooden stiffener between stiffeners and S & F the new bottom wooden stiffener between stiffeners in the furniture (chair writing) as per drawing No: FD-280 complete all as specified and as directed.
33
-
-
... More
Removing unserviceable bottom wooden stiffener of leg and S & F the new bottom wooden stiffener of leg in the furniture (chair writing) as per drawing No: FD-280 complete all as specified and as directed.
35
-
-
... More
Removing unserviceable canning of seat and S & F the new canning of seat using polyethylene cane of Type-I as per IS 5378: 1994, 2 mm (width) X 0.40 mm (thick) polyethylene cane for seat and 3.5 mm (width) X 0.50 mm (thick) polyethylene cane for border, weaved in pre-woven pattern in the furniture (chair writing) as per drawing No: FD-280 complete all as specified and as directed.
125
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (chair writing) as per drawing No: FD-280 complete all as specified and as directed.
125
-
-
... More
Removing unserviceable PVC ring and S & F the new PVC ring in the furniture (chair writing) as per drawing No: FD-280 complete all as specified and as directed.
250
-
-
... More
Removing unserviceable front leg of "sofa set" and S & F the new front wooden leg of "sofa set" as per drawing No. FD-281 complete all as specified and as directed.
5
-
-
... More
Removing unserviceable rear leg of "sofa set" and S & F the new rear wooden leg of "sofa set" as per drawing No. FD-281 complete all as specified and as directed.
5
-
-
... More
Removing unserviceable batten of seat frame of "sofa set" and S & F the new wooden batten of seat of "sofa set" as per drawing No. FD-281 complete all as specified and as directed.
4
-
-
... More
Removing unserviceable batten of back frame of "sofa set" and S & F the new wooden batten of back rest of "sofa set" as per drawing No. FD-281 complete all as specified and as directed.
4
-
-
... More
Removing unserviceable armrest of "sofa set" and S & F the new wooden armrest of "sofa set" as per drawing No. FD-281 complete all as specified and as directed.
5
-
-
... More
Removing unserviceable seat cushion of "sofa set" and S & F the new seat cushion for size of single seater (100 mm thick polyurethane flexible foam, 90 % open cell, minimum density 40 kg per cubic meter, IFD @25% deflection use (pounds/50 square inch on 20’’ X 20’’ X 4’’) more than 30) including covered with tapestry cloth of costing not less than ₹350/-, of "sofa set" as per drawing No. FD-281 complete all as specified and as directed.
100
-
-
... More
Removing unserviceable back cushion of "sofa set" and S & F the new back cushion for size of single seater (100 mm thick polyurethane flexible foam, 90 % open cell, minimum density 40 kg per cubic meter, IFD @25% deflection use (pounds/50 square inch on 20’’ X 20’’ X 4’’) more than 30) including covered with tapestry cloth of costing not less than ₹350/-, of "sofa set" as per drawing No. FD-281 complete all as specified and as directed.
100
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (sofa set to seat 1 person) as per drawing No: FD-281 complete all as specified and as directed.
13
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (sofa set to seat 3 persons) as per drawing No: FD-281 complete all as specified and as directed.
13
-
-
... More
Removing unserviceable PVC ring and S & F the new PVC ring in the furniture (sofa set) as per drawing No: FD-281 complete all as specified and as directed.
100
-
-
... More
Removing unserviceable wooden stiffener of leg and S & F the new wooden stiffener of leg of "Table with drawer" as per drawing No. FD-283 complete all as specified and as directed.
10
-
-
... More
Removing unserviceable wooden leg and S & F the new wooden leg of "Table with drawer" as per drawing No. FD-283 complete all as specified and as directed.
15
-
-
... More
Removing unserviceable drawer and S & F drawer made of 12 mm thick, 9 ply, BWR grade, AA type plywood as per IS 303: 2024 in bottom, sides and back of drawer, 19 mm thick, 11 ply, BWR grade, AA type plywood as per IS 303: 2024 in front of drawer mm thick of "Table with drawer" as per drawing No. FD-283 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (table with drawer) as per drawing No: FD-283 complete all as specified and as directed.
63
-
-
... More
Removing unserviceable front leg and S & F the new wooden front leg in the furniture (chair easy) as per drawing No: FD-358 complete all as specified and as directed.
15
-
-
... More
Removing unserviceable rear leg and S & F the new wooden rear leg in the furniture (chair easy) as per drawing No: FD-358 complete all as specified and as directed.
15
-
-
... More
Removing unserviceable armrest with cushion and S & F the new wooden armrest with cushion in the furniture (chair easy) as per drawing No: FD-358 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable front rail and S & F the new wooden front rail in the furniture (chair easy) as per drawing No: FD-358 complete all as specified and as directed.
8
-
-
... More
Removing unserviceable rear rail and S & F the new wooden rear rail in the furniture (chair easy) as per drawing No: FD-358 complete all as specified and as directed.
8
-
-
... More
Removing unserviceable side rail and S & F the new wooden side rail in the furniture (chair easy) as per drawing No: FD-358 complete all as specified and as directed.
15
-
-
... More
Removing unserviceable seat cushion and S & F the new seat cushion (75 mm thick polyurethane flexible foam, 90 % open cell, minimum density 40 kg per cubic meter, IFD @25% deflection use (pounds/50 square inch on 20’’ X 20’’ X 4’’) more than 30 including covered with tapestry cloth of costing not less than ₹350/-) in the furniture (chair easy) as per drawing No: FD-358 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable back cushion and S & F the new back cushion (50 mm thick polyurethane flexible foam, 90 % open cell, minimum density 40 kg per cubic meter, IFD @25% deflection use (pounds/50 square inch on 20’’ X 20’’ X 4’’) more than 30 including covered with tapestry cloth of costing not less than ₹350/-) in the furniture (chair easy) as per drawing No: FD-358 complete all as specified and as directed.
25
-
-
... More
Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax/wooden putty and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (chair easy) as per drawing No: FD-358 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable front leg of "sofa set" and S & F the new front wooden leg of "sofa set" as per drawing No. FD-373 complete all as specified and as directed.
5
-
-
... More
Removing unserviceable rear leg of "sofa set" and S & F the new rear wooden leg of "sofa set" as per drawing No. FD-373 complete all as specified and as directed.
5
-
-
... More
Removing unserviceable batten of seat frame of "sofa set" and S & F the new wooden batten of seat of "sofa set" as per drawing No. FD-373 complete all as specified and as directed.
4
-
-
... More
Removing unserviceable batten of back frame of "sofa set" and S & F the new wooden batten of back rest of "sofa set" as per drawing No. FD-373 complete all as specified and as directed.
4
-
-
... More
Removing unserviceable armrest of "sofa set" and S & F the new wooden armrest of "sofa set" as per drawing No. FD-373 complete all as specified and as directed.
5
-
-
... More
Removing unserviceable seat cushion of "sofa set" and S & F the new seat cushion for size of single seater (100 mm thick polyurethane flexible foam, 90 % open cell, minimum density 40 kg per cubic meter, IFD @25% deflection use (pounds/50 square inch on 20’’ X 20’’ X 4’’) more than 30) including covered with tapestry cloth of costing not less than ₹350/-, of "sofa set" as per drawing No. FD-373 complete all as specified and as directed.
100
-
-
... More
Removing unserviceable back cushion of "sofa set" and S & F the new back cushion for size of single seater (100 mm thick polyurethane flexible foam, 90 % open cell, minimum density 40 kg per cubic meter, IFD @25% deflection use (pounds/50 square inch on 20’’ X 20’’ X 4’’) more than 30) including covered with tapestry cloth of costing not less than ₹350/-, of "sofa set" as per drawing No. FD-373 complete all as specified and as directed.
100
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (sofa set to seat 1 person) as per drawing No: FD-373 complete all as specified and as directed.
13
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (sofa set to seat 3 persons) as per drawing No: FD-373 complete all as specified and as directed.
13
-
-
... More
Removing unserviceable PVC ring and S & F the new PVC ring in the furniture (sofa set) as per drawing No: FD-373 complete all as specified and as directed.
100
-
-
... More
Removing unserviceable wooden leg and S & F the new wooden leg in the furniture (Table dining 4 persons) as per drawing No. FD/MAP-II/03 sheet No. 1/1 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable top wooden long rail and S & F the new top wooden long rail in the furniture (Table dining 4 persons) as per drawing No. FD/MAP-II/03 sheet No. 1/1 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable top wooden short rail and S & F the new top wooden short rail in the furniture (Table dining 4 persons) as per drawing No. FD/MAP-II/03 sheet No. 1/1 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated particle board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type II (Designation PLB-12 or PLB-22), made out of medium density particle board (flat pressed-three layer or multilayer and graded (grade I or grade II), bonded with BWR adhesive PVC edge banding made from thermoplastic resin in the furniture (Table dining 4 persons) as per drawing No. FD/MAP-II/03 sheet No. 1/1 complete all as specified and as directed.
150
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (Table dining 6 persons) as per drawing No. FD/MAP-II/03 sheet No. 1/1 complete all as specified and as directed.
150
-
-
... More
Removing unserviceable leg and S & F the new wooden leg in the furniture (Bin Linen Multipurpose) as per drawing No: FD/E6/MAP/09 complete all as specified and as directed.
40
-
-
... More
Removing unserviceable stiffener and S & F the new wooden stiffener in the furniture (Bin Linen Multipurpose) as per drawing No: FD/E6/MAP/09 complete all as specified and as directed.
50
-
-
... More
Removing unserviceable back and S & F the new plywood back made of 12 mm thick, 5 ply, BWR grade, AA type plywood as per IS 303: 2024 and IS 848: 2006 in the furniture (Bin Linen Multipurpose) as per drawing No: FD/E6/MAP/09 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable top panel and S & F the new top panel made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Bin Linen Multipurpose) as per drawing No: FD/E6/MAP/09 complete all as specified and as directed.
18
-
-
... More
Removing unserviceable side and middle panel and S & F the new side and middle panel made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Bin Linen Multipurpose) as per drawing No: FD/E6/MAP/09 complete all as specified and as directed.
21
-
-
... More
Removing unserviceable bottom panel and S & F the new bottom panel made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Bin Linen Multipurpose) as per drawing No: FD/E6/MAP/09 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable large shutter and S & F the new large shutter made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Bin Linen Multipurpose) as per drawing No: FD/E6/MAP/09 complete all as specified and as directed.
20
-
-
... More
Removing unserviceable small shutter and S & F the new small shutter made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Bin Linen Multipurpose) as per drawing No: FD/E6/MAP/09 complete all as specified and as directed.
20
-
-
... More
Removing unserviceable drawer and S & F the new drawer made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Bin Linen Multipurpose) as per drawing No: FD/E6/MAP/09 complete all as specified and as directed.
55
-
-
... More
Removing unserviceable large shelf and S & F the new large shelf made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Bin Linen Multipurpose) as per drawing No: FD/E6/MAP/09 complete all as specified and as directed.
15
-
-
... More
Removing unserviceable small shelf and S & F the new small shelf made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Bin Linen Multipurpose) as per drawing No: FD/E6/MAP/09 complete all as specified and as directed.
15
-
-
... More
Removing unserviceable front leg and S & F the new front leg in the furniture (dining chair) as per drawing No: FD/E6/MAP/10 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable rear leg and S & F the new rear leg in the furniture (dining chair) as per drawing No: FD/E6/MAP/10 complete all as specified and as directed.
25
-
-
... More
Removing unserviceable front rail of seat and S & F the new front rail of seat in the furniture (dining chair) as per drawing No: FD/E6/MAP/10 complete all as specified and as directed.
12
-
-
... More
Removing unserviceable rear rail of seat and S & F the new rear rail of seat in the furniture (dining chair) as per drawing No: FD/E6/MAP/10 complete all as specified and as directed.
12
-
-
... More
Removing unserviceable side rail of seat and S & F the new side rail of seat in the furniture (dining chair) as per drawing No: FD/E6/MAP/10 complete all as specified and as directed.
40
-
-
... More
Removing unserviceable vertical stirrups and S & F the new vertical stirrups in the furniture (dining chair) as per drawing No: FD/E6/MAP/10 complete all as specified and as directed.
56
-
-
... More
Removing unserviceable seat cushion and S & F the new seat cushion (75 mm thick polyurethane flexible foam, 90 % open cell, minimum density 40 kg per cubic meter, IFD @25% deflection use (pounds/50 square inch on 20’’ X 20’’ X 4’’) more than 30 including covered with tapestry cloth of costing not less than ₹350/-) in the furniture (dining chair) as per drawing No: FD/E6/MAP/10 complete all as specified and as directed.
150
-
-
... More
Complete removal of all paints using paint remover or caustic soda solution and cleaning surface using turpentine or clean water with little acetic acid/vinegar and stopping holes and indentations on the surface with glazier’s putty (1 part white lead + 3 part fine powdered chalk + boiled linseed oil to form stiff paste) or ready made putty as per IS 419: 1967 and finishing with two coated of French polish and match with the colour with high class glossy finish in the furniture (dining chair) as per drawing No: FD/E6/MAP/10 complete all as specified and as directed.
150
-
-
... More
Removing unserviceable upper drawer and S & F the new upper drawer, front part made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23), other parts made of 12 mm thick, 5 ply, BWR grade, AA type plywood, including PVC edge banding made from thermoplastic resin, duly supported on one pair (2 Nos) high precision telescopic channel made of mild steel 1.25 mm thick of 45 kg capacity to be designed as per drawer size and to meet the weight requirement to ensure smooth movements of drawer with /without content weights in the furniture (Table Bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.
75
-
-
... More
Removing unserviceable lower drawer and S & F the new lower drawer, front part made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23), other parts made of 12 mm thick, 5 ply, BWR grade, AA type plywood, including PVC edge banding made from thermoplastic resin, duly supported on one pair (2 Nos) high precision telescopic channel made of mild steel 1.25 mm thick of 45 kg capacity to be designed as per drawer size and to meet the weight requirement to ensure smooth movements of drawer with /without content weights in the furniture (Table Bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.
75
-
-
... More
Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.
200
-
-
... More
Removing unserviceable side and S & F the new side made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.
200
-
-
... More
Removing unserviceable bottom and S & F the new bottom made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.
200
-
-
... More
Removing unserviceable backing and S & F the new plywood backing made of 12 mm thick, 5 ply, BWR grade, AA type plywood as per IS 303: 2024 and IS 848: 2006 in the furniture (Table Bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.
150
-
-
... More
Removing unserviceable PVC ring and S & F the new PVC ring in the furniture (Table Bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.
200
-
-
... More
Removing unserviceable long side of frame and S & F the new ong side of wooden frame in the furniture (Mirror Dressing (Gents)) as per drawing No: FD/E6/MAP/16 complete all as specified and as directed.
60
-
-
... More
Removing unserviceable short side of frame and S & F the new short side of wooden frame in the furniture (Mirror Dressing (Gents)) as per drawing No: FD/E6/MAP/16 complete all as specified and as directed.
60
-
-
... More
Removing unserviceable backing and S & F the new plywood backing made of 12 mm thick, 5 ply, BWR grade, AA type plywood as per IS 303: 2024 and IS 848: 2006 in the furniture (Mirror Dressing (Gents)) as per drawing No: FD/E6/MAP/16 complete all as specified and as directed.
35
-
-
... More
Removing unserviceable glass shelf and S & F the new glass shelf made of 5.5 mm thick glass, AA Quality or Special Selected Quality ( SSQ ) as per IS 2835: 1987 in the furniture (Mirror Dressing (Gents)) as per drawing No: FD/E6/MAP/16 complete all as specified and as directed.
75
-
-
... More
Removing unserviceable top and bottom side and S & F the new top and bottom side made of prelaminated particle board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type II (Designation PLB-12 or PLB-22), made out of medium density particle board (flat pressed-three layer or multilayer and graded (grade I or grade II), bonded with BWR adhesive PVC edge banding made from thermoplastic resin in the furniture (Mirror Dressing (Gents)) as per drawing No: FD/E6/MAP/16 complete all as specified and as directed.
30
-
-
... More
Removing unserviceable mirror and S & F the new mirror made of 5.5 mm thick glass, AA Quality or Special Selected Quality ( SSQ ) as per IS 2835: 1987 and silvering, copper coating, protective coating, reflectance as per IS 3438: 1994 and coating by using electroplating in the furniture (Mirror Dressing (Gents)) as per drawing No: FD/E6/MAP/16 complete all as specified and as directed.
30
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements