Military Engineer Services Tender

Excavating in post holes (or similar holes) (Hard rock) each n.exc 0.5 cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25 cm watering and removing surplus soil to a n.exc 50m and maing good surface distance complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete type C2 1:3:6 in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out Hard/dence soil complete all as specified and directed by Engr-in-Charge.

Material and labour for brick work with using old size sub class 'B' bricks straight or curved on plain exceeding 6 metre mean radius built in cement mortar (1:4), complete all as specified and directed by Engr-in-Charge

material and labour for Hard core of Guage n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface with broken stone boulders complete all as specified and directed by Engr-in-Charge

Material and labour 40mm thick PCC 1:2:4 type B1 using 20mm graded stone agg as in flooring finsihed even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for two coats of synthetic enamel painting to new steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surface over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge

M&L for Rotational moulded polyethylene water storage tanks 1000 Ltr Capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge

Material and labour for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charge

Material and labour for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

Material and labour Hardcore of broken stone or boulders of gauge exc 63mm but n exc. 100mm, deposited spread and levelled in layers nexc. 15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engr-in-Charge.

Supply, installation, testing, & commissioning of Automatic ORGANIC WASTE CONVERTER Capacity 100 Each Kgs/Day which shreds and homogenizes organic waste with appropriate Bioculture and organic media. The output from OWC machine is a Raw Compost having uniform coloured and soil structured coarse powder, free of bad odour. The treated waste does not attracrt flies, mosquitoes, rats, animals and birds. The OWC operation is 15-20 minutes batch cycles. In addition curing system for maturing of raw compost is also necessary to provide conducive atmosphere to micro organisims to multiple and degrade the raw compost Curing system maintains required mosture level and proper aeration Raw compost stored in Curing system gets matured and forms compost in 7-10 days process complete all as specified and directed by Engr-in-Charge. Make : Envicare Solution Pvt Ltd or its equivalent make with ISI Mark. The Technical date are as under :-

(i) Equipment Data requirement (a) Power connection 2.5HP (Main Motor &Chopper Motor). (b) Brim Capacity 30 Liters. (c) waste Batch Size 10 Kg. (d) Batch Duration : 15 minute, (e) material of Construction. All contract parts of SS-304, (f) MOC of outer cover MS

(ii) Curing System Data Requirement :- Capacity 100 Kg of Organic Waste per day. (a) 50 No of HDPE crates of size 54x36x26 cm, laminated with aerating net, (b) One number of four shelf folding storage rack of size 365x120x255 cm, (c) 2 Nos of Leach at collection tray of GI of size 150x55x7 cm, (d) Double Fogger Moisture control fogging system consisting of 700 foggers, Disc Filter, Ball Valve, 1 No of Laxmi Make Pump, Time Control unit for spray and frequency control, One number of pressure gauge and other accessories like piping, valves etc.

M&L for SMDB Box outdoor Horizontal type 3 phase and neutral to distribute LT Aerial Bunched Cable and fixed in RCC Pole complete all as specified and directed by Engr-in-Charge.

Material & labour for XLPE insulated, armoured heavey duty electric cables with aliminium concductor, 1100 volts grade cross-sectional area 50 sqmm 3½ core complete with lugs and clamps complete all as specified and directed by Engr-in-Charge.

Material & labour for XLPE insulated, armoured heavey duty electric cables with aliminium concductor, 1100 volts grade cross-sectional area 25 sqmm 3½ core complete with lugs and clamps complete all as specified and directed by Engr-in-Charge.

S & F 40mm bore mild steel tubing, "light grade" galvanized protection of under ground cable, on poles/walls/under road crossing etc with clamps/all fittings for holding the pipes including cutting and making good distrubed surgace complete all as specified and directed by Engr-in-Charge.

Supply and install, testing and commissioning of Bus bar chamber of size 30 cm x 30cm x 40 cm outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer complete all as specified and directed by Engr-in-Charge. The panel board shall be comprising of the following accessories

(a) Incomming MCCB 63A - 01 No with suitable aluminum bus bar arrangement system for out going.

(b) Digital Voltmeter-96 x 96 mm flush secure Panel mounting type 0-500V

(c) Digital Amp meter 96 mm X 96 mm flush secure Panel mounting type 0-100 Amps

(d) RYB neon indicating lamp set of three- 01 Nos

M&L for renewal of plate earthing for LT panel with galvanised mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate electrode at one end and connected to metallic bodies of HT/LT equipments etc at the other, earth strip encased in and including 40mm bore GI medium grade pipe with all fittings from top of electrode to body of equipment fixed with and including 40 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-O using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work , etc complete all as specified and directed by Engr-in-Charge and shown in electrical plate No 3 of SSR Pt-I.

Supply and laying new GI pipe medium grade including all GI fittings of size 25 mm dia complete all as specified and directed by Engr-in-Charge.

Supply and laying new GI pipe medium grade including all GI fittings of size 20 mm dia complete all as specified and directed by Engr-in-Charge.

Supply & Fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 25 mm dia complete all as specified and directed by Engr-in-Charge.

Supply & Fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 20 mm dia complete all as specified and directed by Engr-in-Charge.

M&L for AMC for 02 x Automatic Fully Mechanized Organic Waste Machine for 4 years (02 year free and next 02 year payable) complete all as specified and directed by Engr-in-Charge. Note :- 2 years Free AMC as per defect liability period of 24 month has been considered.