Military Engineer Services Tender

M & L for point wiring for one light/fan/bell/buzzer point controlled by one way switch with 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) including 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) as continues earth wire in green colour to coomon earth dolly laid/drawn into and including non metalic PVC concealed conduit (medium duty, ISI marked not less than 20 mm dia) with all fittings such as tee, bends etc all as per IS terminated in & including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular Switches, sockets, regulators etc with and including modular cover plates with frame of requisite modules all as specified and as directed: Notes:- (i) Cost of cutting/leaving forming chases for conduit, sinking for metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed for include for modular metal flush boxes of requisite module and modular cover plate with frame of requisite module of colour as approved by GE

(b)One pin 5 amps socket point on the same board with other switches complete

(c) One 3 pin 5 amps socket on independent board.

Ditto all as per item No 5 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 2.5 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.

S&F LED tube light fitting, 1 x 20 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-charge.

supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.

S&F sheet metal enclosure MCB DB, double door, TPN 4 way with 200 Amps rated busbar all as specified and as directed.

Sheet metal enclosure for distribution boards double door, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 8 ways, supplied and fixed in repair, including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge.Make ABB/Legrand/C&S

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. Make ABB/Legrand/C&S

MCB suitable for 6 to 32 Amps, 240 Volt AC supply single pole and neutral with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge.Make ABB/Legrand/C&S

S & F MCB TPN, 63 Amps, 415 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.

M&L for submain wiring using 2 runs of single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 2runs of 6 Sqmm of voltage rating 1100V for Single phase & neutral, drawn in and including concealed PVC conduit of dia not less than 25 mm dia with standard acessories, along with two run of FRLS PVC insulated, unsheathed, stranded copper conductor of size 2x 6.0 Sqmm as earth continuity conductor all as specified and directed(Note-2 runs of single core FRLS PVC cable 6sqmm for Single phase & neutral with one run of earth conductor as earth and conduit shall be measured as one unit)

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoorair quality with minimum 5 star rating and EER 3.2.of capacity 1 TR complete all as specified and directed by Engr-in-charge.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoorair quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR complete all as specified and directed by Engr-in-charge.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type &designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.

S & F double door, sheet metal enclosure, powder coated for MCB DB TPN 4 WAY fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-charge.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm as earthing lead dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed by Engr-in-Charge.

M&L for Air termination, single pointed aluminium rod 12mm dia and 300mm long all as specified and directed by Engr-in-Charge.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw all as specified and directed by Engr-in-Charge.

M&L for fixing Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and directed by Engr-in-Charge.

M&L for Plane cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in foundation, in roof kerbs or mud stops, rounded or chamfered on edges for Termination rod and test point treminals all as specified and directed by Engr-in-Charge.

S & F of 32 mm dia GI Tubes 'medium grade' with all fitting laid in trenches or wall complete all as specified and directed by Engr-in-Charge.

M & L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6mm galvanised iron strip all as specified and directed by Engr-in-Charge.

Supply & Laying & commissining of LT UG cable XLPE sheathed PVC insulated, screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade, laid in tranches, in GI pipe, including brass cable glands, clamps etc of size 3.5 core x 120 Sqmm complete all as specifed and as directed. Make : Polycab/KEI/Havells Note: Earthwork, sand cushioning, bricks, GI pipe, etc will be measured and pad under appropriate items.

Supply & Laying & commissining of LT UG cable XLPE sheathed PVC insulated, screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade, laid in tranches, in GI pipe, including brass cable glands, clamps etc of size 4 core x 16 Sqmm complete all as specifed and as directed. Make : Polycab/KEI/Havells Note: Earthwork, sand cushioning, bricks, GI pipe, etc will be measured and pad under appropriate items.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25sq mm 4 core complete all as specified and directed.

Excavation in trenches n. exc 1.5 m in depth and not exc 1.5 m wide for laying of UG cable / pole etc and getting out including forming bottom surface to required level and gradient in soft/dense soil complete all as specified and as directed.

Excavation in trenches n. exc 1.5 m in depth and not exc 1.5 m width for laying of cable lines etc and getting out in hard/ dense soil complete all as specified.

Returning filling in, excavated soil including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified.

Removing excavated materials/soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 above the starting point complete all as specified and as directed by Engr-in-charge.

Supplying and laying un-reinforced precast concrete cable cover, class Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed by Engr-in-charge.

M&L for Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 cm spread thickness (8 cm in depth before laying the cable and 15 cm in depth after laying the cable) and consolidated (punned) upto 180 mm thickness, complete all as specified and as directed. Note : For the purpose of payment, punned thickness of sand cushioning only shall be measured and paid for.

Supply and fixing GI Pipe light grade of Size 40 mm bore with all fittings for passing of cables fixed to pole/wall/laid under floor or roads including all fixing accessories complete for protection of cable all as specified and directed. Make: Jindal/ Bansl/Tata

Supply, laying and jointing GI tubes, medium grade 40mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches complete all as specified and directed by Engr-in-charge.

Supply, laying and jointing GI tubes, medium grade 25mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches complete all as specified and directed by Engr-in-charge.

Supply, laying and jointing GI tubes, medium grade 20mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches complete all as specified and directed by Engr-in-charge.

Cutting existing steel tubing for alterations or additions done in position without taking down for 10mm to 50 dia pipe (Each cut measured)

S&F Gun metal gate valve 40mm bore with iron wheel head screwed both ends for iron pipes complete all as specified and directed .

S&F Gun metal gate valve 20mm bore with iron wheel head screwed both ends for iron pipes complete all as specified and directed .

S&F ball brass valve high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed.

Rotational moulded polye thylene water storage tanks capicity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Materal and labour for construction of brick masonary valve pit chamber of size 900x900x600 mm (Internal dimension) using sub class ,B, bricks complete, earth work, PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation, brick masonary sub class bricks 23 cm build n cement mortar and below ground level PCC with 1:2:4 type B2 using 20mm grade stone aggregate, copng 50 mm thick including frame of size 75x75x6mm made of angles iron and chamber cover made of MS sheet of 4 mm thickness double leaf including MS hinges locking arrangement with provision of locks and keys, painting of the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation, returning & filling & removing of surplus soil etc complete all as specified and as dircted by Engineer in Charge.

Supply, installation, fixing and commissioning of Adjustable type Inverter AC, 02 Ton, 5 Star - 245 Volts Vectra Plus split type air conditioner of Cooling Capacity (2.0 TR) BEE & minimum 5 star rated, multi adjustable mode, High ambient cooling, supper dry, turbo cooling , Anti Microbial air filter, Eco friendly refrigent, 100 % copper, wide voltage range operation ,with cordless remote control unit Cooling Arrengement and, suitable for wall mounted single phase 230/250 volt AC including breaking necessary for fixing indoor and outdoor unit on stand and making good to distrubed surfaces with cement morter to match with existing colour after commissioning, making connection between indoor and outdoor unit with copper tubing with proper insulation and making necessary connection unplasticised PVC pipe medium duty 20 mm dia for draining out condensed water all as required including necessary connection complete. Note:- (i) Rate to be included cost of bracket, drain pipe, hole in brick wall etc.(ii) Cost of copper tubing for indoor and out door unit deemed shall be including quoted rate as per O.M. Make : Hitachi / Blue Strar / Voltas / L.G Note :- Air Conditioning Unit shall have following technical specification :- (a) Model Type Voltas 245 V Vectra Plus (b) Voltage range :- AC shall operate on voltage range from 110 V to 285 Volts (c)Min Coolong capacity - 3100 W (d) Max Cooling capacity - 6900 W (e) Rated Cooling capacity 100 % - 6200 W

(f) Electricity Consumtion (Annual Based on 1600 Hours BEE Norms ) - 959.19 KWH/Year (g) Nos of fan speed - Auto/turbo/High/Med/Low (h) Fan Motor Type - BLDC (j) Expansion Device - EVV (k) Valve Size - 15.87/6.35 mm Gas/Liquid (l) Refrigerant - R-32 (m) ODU Dimension (wxhxd) - 90x65x36.5 CM (n)Compressor Type - High EER Twin Rotary - BLDC (o) copper pipe - 3.5 Mtr (p) ODU code - 4513417 (q) IDU code - 4553359

Supply & Fix Voltage Stabilizer for automatic operation , single phase naturally air cooled indoor type & designed for input variation between 130 V to 300 V with output voltage stabilized at 230V with accuracy of +/- 2.5% and of capacity 5 KVA Make :- Voltas Cat NO. VA5130- 5KVA-130V-300V or Eqvilent make of V-Guard / LG

Supply, installation, fixing and commissioning of Adjustable type Inverter AC, 1.5 Ton, 5 Star - 185 Volts Vectra Elegant split type air conditioner of Cooling Capacity (1.5 TR) BEE & minimum 5 star rated, multi adjustable mode, High ambient cooling, supper dry, turbo cooling , Anti Microbial air filter, Eco friendly refrigent, 100 % copper, wide voltage range operation ,with cordless remote control unit Cooling Arrengement and, suitable for wall mounted single phase 230/250 volt AC including breaking necessary for fixing indoor and outdoor unit on stand and making good to distrubed surfaces with cement morter to match with existing colour after commissioning, making connection between indoor and outdoor unit with copper tubing with proper insulation and making necessary connection unplasticised PVC pipe medium duty 20 mm dia for draining out condensed water all as required including necessary connection complete. Note:- (i) Rate to be included cost of bracket, drain pipe, hole in brick wall etc.(ii) Cost of copper tubing for indoor and out door unit deemed shall be including quoted rate as per O.M. Make : Hitachi / Blue Strar / Voltas / L.G Note :- Air Conditioning Unit shall have following technical specification :- (a) Model Type Voltas 185 V Vectra Elegant (b) Voltage range :- AC shall operate on voltage range from 110 V to 285 Volts (c)Min Coolong capacity - 2425 W (d) Max Cooling capacity - 5300 W (e) Rated Cooling capacity 100 % - 4850 W

(f) Electricity Consumtion (Annual Based on 1600 Hours BEE Norms ) - 751.21 KWH/Year (g) Nos of fan speed - Auto/turbo/High/Med/Low (h) Fan Motor Type - BLDC (j) Expansion Device - EVV (k) Valve Size - 12.7 mm/6.35 Gas/Liquid (l) Refrigerant - R-32 (m) ODU Dimension (wxhxd) - 83.5 X55.5X29.5 CM (n)Compressor Type - High EER Twin Rotary - BLDC (o) copper pipe - 3.5 Mtr (p) ODU code - 4513350 (q) IDU code - 4553290

Supply & Fix Voltage Stabilizer for automatic operation , single phase naturally air cooled indoor type & designed for input variation between 90 V to 300 V with output voltage stabilized at 230V with accuracy of +/- 2.5% and of capacity 4 KVA Make :- Voltas Cat NO. VA4090 - 4 KVA-90V-300V or Eqvilent make of V-Guard / LG

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.Make ABB/Legrand/C&S

Sheet metal enclosure for distribution boards single door, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 2 ways, supplied and fixed in repair, including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge.Make ABB/Legrand/C&S

M&L sub main wiring with 2 single core, multi-stranded PVC insulated cable unsheathed 1100 volts grade with copper conductor of size 4 sq mm drawn and including PVC casing capping including earth continuity conductor cable of size 4 sq mm PVC insulated unsheathed copper conductor cable connected to common earth and earth dolly complete all as specified and as directed by Engineer-in-Charge.

Supply, installation, testing and commissioning desert cooler ( overall minimum size 26”x26”x39”) made out of 18 Gauge galvanised sheet, depth of water tank shall be 11” ( Min), electric driven, 230 volt , single phase, 50 Hz supply having nominal air existing platform / stand including provision of PVC braided connection heavy duty 750mm long with brass union at both end for necessary water connection, Desert cooler comprising of the following :- (a) Float valve shall be deemed to be inclusive with cost of desert cooler. (b) Cooler fan motor , 145 watt, 1400 RPM, Single phase, 500mm sweep, aluminium blades ( three number) Make : Crompton Greeeves Ltd/Khaitan/Cool home with standered clamps fixing to body of cooler. (c) ON/OFF switch for pump and motor along with three speed selector switch for fan. (d) Submersible pump 23 watt ( minimum) capacity, 220/240 volts, single phase, 50 Hz having lifting height 2 mtr of make Crompton/Bajaj as approved by GE. (e) Front adjustable grill both side i.e horizontally & vertically (f) Necessary cord with plug top for electric connection. (g) Three side slotted shutter with suitable pad as per standard practice. (h) Spray painting to external surface of cooler and anticorrosive rubber paint to internal surface of water tank portion.