Military Engineer Services Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 86,260Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Spl Repair To Toilet Blocks Of Bldg No P-119, P-120 And P-125 Alongwith Provn Of Fence And Gate In Swimming Pool Complex Under Zone-i Area At Jaipur Mil Stn
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_677247_1Bid Award Id
ViewTender No
GE/J- /2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M&L for brickwork with subclass ‘B’ bricks (using old size bricks) straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed.
11.52
-
-
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
1045.2
-
-
M&L 25mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in floor complete all as specified & directed.
295.8
-
-
M & L for WPT in sunken floors as described here under:- (i) Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 3 mm thick and weighing not less than 3.0 kg/ sqm of make super thermolay manufactured by STP ltd or Hyper Plas (Polyster) manufactured by M/S IWL Ltd or 'Shatiplas' (Polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or EMW Flate' of M/S Texas India Ltd) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface and filling lime concrete 1:5:10 type E2 with brick bats complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately Note : Slab area only will be measured for payment purpose.
50
-
-
Supply only liquid water proofing compund complete all as specified and directed.
12
-
-
M&L for non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed
295.8
-
-
M & L glazed coloured ceramic tiles 300x450x7 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed
689.4
-
-
M&L for light shade vitrified ceramic tiles 10mm thick (square / rectangular) polished, area of each tile exc 0.18 sqm but n exc .38 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed.
60
-
-
M&L Machine pressed precast concrete rubber moulded coloured interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M-35 Grade in floors/path/parking with grey cement and no pigmnent laid over and incl 25 mm thick sand cushioning complete all as specified and as directed.
Note : Sand cushioning shall not be measured and paid seperately
168
-
-
Taking down cement plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water complete all as specified and directed
1237.08
-
-
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth w/o using extra cement complete all as specified and as directed.
204.48
-
-
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 cfinished even and smooth w/o using extra cement complete all as specified and as directed.
877.32
-
-
M&L rendering 5 mm thick in CM 1:3 as on concerete surface of ceilings finished even and smooth without using extra cement complete all as specified and directed .
293.4
-
-
M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion (Ist quality) white or tinted by mechanical means over 1mm thick wall care putty to make smooth the undulated surfaces & a coat of primer complete all as specified and directed.
204.48
-
-
M & L for preparation of new surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/tr and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.9 litre/10 sqm over new surface complite all as specified and directed
739.2
-
-
M & L for preparation of newly plastered surfaces & applying three coats of white wash by mechanical means on ceilings complete as spd & directed
293.4
-
-
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
60
-
-
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
24
-
-
Taking down ventilator with frame complete n exc 1.0 sqm each complete all as specified and directed.
72
-
-
S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing given in SSR Part-I complete as directed and specified.
389.04
-
-
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing given in SSR Part-I complete as directed and specified.
123.4
-
-
S&F 100 mm size butt hinges, medium weight, stainless steel complete all as specified and directed.
252
-
-
S & F 200mm long SS barrel tower bolts not less than 12 mm dia of complete all as specified & as directed.
168
-
-
S & F 150mm size SS handles fixed with screws complete all as specified & as directed.
168
-
-
S & F Powder coated anodised aluminium window and ventilator shutters glazed type, aluminium section weighing 0.55 kg/m incl necessary joining cleats (like tower bolt, butt hinges and handle etc as per reqd specification) and rubber packing anodised aluminium snap beading screws etc complete all as specified Note : sheet glass, wire cloth shall be measured & paid separately.
44.56
-
-
S & F stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & as directed.
17.82
-
-
S & F 5.5mm thick plain sheet glass ordinary quality and glazing with aluminium beads and packed with rubber gasket in aluminium door / window in sqaures not exc 0.5 sqm in each pane complete all as specified & as directed.
44.56
-
-
S&F 5.00mm thick frosted or obscrued quality glass and glazing with aluminium beads and neoprene gasket fixed with metal panel pin in square n.exc 0.5 Sqm each pane complete all as specified and as directed.
20
-
-
S&F powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and as directed.
20
-
-
S&F powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating not less than 50 micron) complete all as specified & as directed.
20
-
-
S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe , provision of wash out pipe, incl 20 mm dia ball valve high pressure of PTMT with polythene flynut and aluminium rod etc incl dismantling of old existing tank complete all as specified in SSR Part I, complete all as specified and directed by Engineer-in-Charge.
12
-
-
S&F in repair 25mm bore gun metal gate valve with iron wheel head, screwed down, high pressure, screwed both ends for iron pipe or for union complete all as specified and directed.
12
-
-
S&F in repair 20mm bore gun metal gate valve with iron wheel head, screwed down, high pressure, screwed both ends for iron pipe or for union complete all as specified and directed.
12
-
-
S & F in repair 15mm bore GI tubing medium grade with all necessary fitting, fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed
108
-
-
S & F in repair 20mm bore GI tubing medium grade with all necessary fitting, fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed
144
-
-
S & F in repair 25mm bore GI tubing medium grade with all necessary fitting, fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed
48
-
-
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. complete all as specified and directed.
12
-
-
S&F as in repair 15 mm bore two way bib tap, cast copper alloy chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as directed.
12
-
-
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed.
12
-
-
S&F in repair toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
12
-
-
S&F in repair vitreous china Squatting pan 'Orissa' pattern water closet white size 580mm x 440 mm with integral foot rest (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphone pipe etc.
36
-
-
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level or high level 10 ltr capacity, white, with intel, ball valve, float and handle including brackets, flushing pipe complete all as specified & directed.
36
-
-
S & F in repair vitreous china wash basin, counter sunk, white of oval shape of size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP coupling etc complete all as specified & directed.
24
-
-
S&F bottle trap of Stainless steel of 32mm bore with 300mm long wall connection pipes with minimum weight 32 mm- 260 gms complete all as specified and directed by EIC.
24
-
-
S&F in repair pillar taps 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.
24
-
-
S & F in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white incl providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws with grating and union for discharge pipe including PVC waste pipe complete all as specified and directed.
12
-
-
S&F in repair brass CP towel rail 20mm dia, D type 60 cm long between flanges complete all as specified and directed.
24
-
-
S & F chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union 125 mm size complete all as specified and directed by EIC.
12
-
-
S&F in repair angle valve 15mm dia bore chromium plated cast copper alloy with long shank and cup complete all as specified and directed.
108
-
-
S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified & as directed.
108
-
-
S&F in repair soap dish, stainless steel, approx size 160x160x90 mm complete all as specified and as directed..
24
-
-
S&F in repair 5.50 mm thick of size 600X450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
24
-
-
S&F in repairs 15 mm bore bib tap fancy type chromium plated cast copper alloy with cruth or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by EIC.
72
-
-
Dismantling of cast iron drain pipes any dia, jointed in cement mortar and taking out of trenches if required complete all as specified and directed by EIC.
305
-
-
S&F 75mm UPVC ventilation and rain water pipes single socketed (type B conforming to IS-13592) in any length with rubber ring joints laid in trenches or floors complete all as specified & directed.
70
-
-
S&F 110 mm UPVC ventilation and rain water pipes single socketed (type B conforming to IS-13592) in any length with rubber ring joints laid in trenches or floors complete all as specified & directed.
35
-
-
S&F 75mm UPVC ventilation and rain water pipes single socketed (type A conforming to IS-13592) in any length with rubber ring joints fixed to wallls complete all as specified & directed.
110
-
-
S&F 110 mm UPVC ventilation and rain water pipes single socketed (type A conforming to IS-13592) in any length with rubber ring joints fixed to wallls complete all as specified & directed.
90
-
-
M&L concrete bed to drain pipes 75 mm to 100mm dia cement concrete 1:3:6, type C-2 including packing under, and haunching against the sides of pipes after they are laid and tested in all as specified
50
-
-
S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and directed.
24
-
-
S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed.
24
-
-
S&F 75mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.
24
-
-
S&F 110mm borePVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.
12
-
-
S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.
12
-
-
S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.
12
-
-
S&F in repair 75mm dia PVC (SWR) outlet nahani trap/floor trap with grating including jointing with solvent cement complete all as specified and as directed.
60
-
-
Supply & Fixing of Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt System for Two Pipelines (110mm+110mm) - running Vertical Fixed line with wall distance 3" (75 mm): Pipe Support Clamping made of : 1. Profile Bracket Wall Distance 75 mm (3") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 508mm (20") (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing : As per IS 2629 (1985) - 610 grams/m2 ( 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Quantity for one unit : 1. Profile Bracket of Wall distance 3" (75 mm) - 2 Nos. 2. Slotted C Channel of Size 20"(508mm) - 1 No.; 3. U Bolt Rubber mounted for 4" (110 mm) Pvc pipe Dia. - 2 nos. 5. Fixing Nail thickness 6.5 mm approx and length 62 mm (2 1/2") Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no. : TD/2022/01. Make: Shaivi or equivalent as approved by GE.
30
-
-
Supply & Fixing of Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt System for Three Pipelines (110mm+25mm+25mm) - running Vertical Fixed line with wall distance 3" (75 mm): Pipe Support Clamping made of : 1. Profile Bracket Wall Distance 75 mm (3") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 457mm (18") (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing : As per IS 2629 (1985) - 610 grams/m2 ( 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Quantity for one unit : 1. Profile Bracket of Wall distance 3" (75 mm) - 2 Nos. 2. Slotted C Channel of Size 18" (457 mm) - 1 No.; 3. U Bolt Rubber mounted for 4" (110 mm) Pvc pipe Dia. - 1 nos.4. U Bolt Rubber mounted for 1" (25 mm) Gi pipe Dia. - 2 nos. and 5. Fixing Nail thickness 6.5 mm approx and length 62 mm (2 1/2") Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no. : TD/2022/01. Make: Shaivi or equivalent as approved by GE.
30
-
-
Supply & Fixing of Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt System for Three Pipelines (75mm+25mm+25mm) - running Vertical Fixed line with wall distance 3" (75 mm): Pipe Support Clamping made of : 1. Profile Bracket Wall Distance 75 mm (3") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 457mm (18") (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing : As per IS 2629 (1985) - 610 grams/m2 ( 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Quantity for one unit : 1. Profile Bracket of Wall distance 3" (75 mm) - 2 Nos. 2. Slotted C Channel of Size 18" (457 mm) - 1 No.; 3. U Bolt Rubber mounted for 2 1/2" (75 mm) Pvc pipe Dia. - 1 nos.4. U Bolt Rubber mounted for 1" (25 mm) Gi pipe Dia. - 2 nos. and 5. Fixing Nail thickness 6.5 mm approx and length 62 mm (2 1/2") Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no. :TD/2022/01. Make: Shaivi or equivalent as approved by GE.
30
-
-
Supply & Fixing of Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt System for Single Pipeline (75mm) - running Vertical Fixed line with wall distance 3" (75 mm): Pipe Support Clamping made of : 1. Profile Bracket Wall Distance 75 mm (3") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 10" (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing : As per IS 2629 (1985) - 610 grams/m2 ( 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Quantity for one unit : 1. Profile Bracket of Wall distance 3" (75 mm) - 2 Nos. 2. Slotted C Channel of Size 10" - 1 No.; 3. U Bolt Rubber mounted for2 1/2" (75 mm) Pvc pipe Dia. - 1 nos. and 4. Fixing Nail thickness 6.5 mm approx and length 62 mm (2 1/2") Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no. : TD/2022/01. Make: Shaivi or equivalent as approved by GE.
15
-
-
Supply & Fixing of Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt System for Single Pipeline (75mm) - running Vertical Fixed line with wall distance 3" (75 mm): Pipe Support Clamping made of : 1. Profile Bracket Wall Distance 75 mm (3") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 10"(254mm) (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing : As per IS 2629 (1985) - 610 grams/m2 ( 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Quantity for one unit : 1. Profile Bracket of Wall distance 3" (75 mm) - 2 Nos. 2. Slotted C Channel of Size 10" - 1 No.; 3. U Bolt Rubber mounted for2 1/2" (75 mm) Pvc pipe Dia. - 1 nos. and 4. Fixing Nail thickness 6.5 mm approx and length 62 mm (2 1/2") Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no. : TD/2022/01. Make: Shaivi or equivalent as approved by GE.
15
-
-
Supply & Fixing of Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt System for Single Pipeline (110mm) - running Vertical Fixed line with wall distance 3" (75 mm): Pipe Support Clamping made of : 1. Profile Bracket Wall Distance 75 mm (3") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 10"(254mm) (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing : As per IS 2629 (1985) - 610 grams/m2 ( 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Quantity for one unit : 1. Profile Bracket of Wall distance 3" (75 mm) - 2 Nos. 2. Slotted C Channel of Size 10" - 1 No.; 3. U Bolt Rubber mounted for4" (110 mm) Pvc pipe Dia. - 1 nos. and 4. Fixing Nail thickness 6.5 mm approx and length 62 mm (2 1/2") Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no. : TD/2022/01. Make: Shaivi or equivalent as approved by GE.
30
-
-
Demolition of reinforced cement concrete (reinforcement cutas required to facilitate demolition) in roofs, floors (Other than ground floors), beams, staircases, landing, chajjas, slab & similar suspended work complete all as specified and directed incl removal all rubbish material outside of MD Land complete all as specified and as directed .
1.81
-
-
M&L for Hardcore of broken bricks of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as directed
18
-
-
M&L cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified and directed .
18.9
-
-
Dismantling of stone slab and tiles of any description or thickness in floor aprons etc laid beded and pointed in any mortar complete all as specified and directed .
18
-
-
M&L for precast concrete kerb stones of cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) solid blocks, exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.
4
-
-
M&L preparation of new concrete/ brick/stone surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of priming paint plaster complete all as specified and as directed.
32
-
-
M&L providing precast cement concrete, type B1, 1:2:4 (20 mm graded aggregate ) set in cement mortar 1:4 in landing, cover slabs (for manholes etc.) chullah hoods,chajjas,water troughs, mangers,shelves and similar articles with plain faces including chamfers, weathering, throating etc complete all as specified and directed
0.78
-
-
M&L reinforcement cement concrete (Nominal mix) type A1, 1:1.5:3 (using 20mm graded stone aggregate) as in slab support on walls, landing, balconies, deck slabs and in shelves and the like all as specified
1.04
-
-
M&L use and waste of formwork to sides and soffits of suspended slabs such as roof slab, floor slabs landing horizontal or slopping and similar workks thikness n.exc 200mm including neccesarry sufficient supports etc for flat and rough finished surfaces of concrete etc complete all as specified and directed by Engineer-in-Charge.
12.96
-
-
M & L use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide complete all as specified and as directed.
28.8
-
-
M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
145.15
-
-
M&L 15-16mm thick granite work (table rubbed & polished) (Rajasthan black) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 15 mm screed thick in CM 1:4 complete all as specified and directed .
14.75
-
-
M& L for Rounding to edges of granite or stones slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.
20
-
-
Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth for foundation, etc. or for laying of cables n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
24.3
-
-
Excavation in post holes (or similar holes) in soft / loose soil each n exc 0.5 cum getting out, returning, filling in and ramming earth around, in layers n.exc 25 Cm, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified.
25
-
-
M&L for Providing precast cement concrete louvers and jallies, 25 mm thick (measured solid) including all mouldings but excluding frame, type B-0 1:2:4 ( 12.5 mmgraded stone aggregate) set in CM 1: 4 complete all as specified and directed.
80
-
-
M & L preparing new plastered surfaces and applying two coats of cement base paint (Ist quality) of approved tint on wall all as specified and as directed
298.12
-
-
Returning, filling including spreading leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as directed.
6
-
-
Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as directed.
18.3
-
-
M&L PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
5.4
-
-
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary welding, drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.
Note : Embedded portion in concrete of posts or struts shall be treated with tar or coal tar black paint and cost of same shall be included in the quoted rate of this item.
742.05
-
-
S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to Fe410-W(Gde E-250) Quilaty A complete all as specified and directed.
420
-
-
Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed
Note :- Supply only chain link fencing shall be measured and paid for separately.
114
-
-
Supply only mild steel galvanized chain link fencing 4mm dia of mesh wire, mesh size 100x100mm including line wires complete all as specified and as directed.
433.2
-
-
S&F Mild Steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other end, and fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm and 5 mm to 10mm dia of bolt complete all as specified
20
-
-
S&F MS round bar 10mm dia and over, cut to length and bent to shape required and confirming to Gde-I, IS-432 for line wire to chain link fencing etc complete all as specified.
148.08
-
-
M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (Ist quality) over a coat of red oxide zinc chrome primer complete all as specified and as directed
41.32
-
-
M&L preparation of new steel surface of any description n. exc 10cm in width or girth when un connecting to other painting surface and applying two coats of synthetic enamel paint (Ist quality) over a coat of red oxide zinc chrome primer complete all as specified and as directed
24
-
-
S & F framed work as in doors or gates other places with angle, tee, channel or other section with gusset plates, rails, braces, etc, with ornamental and intricate design complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and pintal hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe-290 Gde-E-165 complete all as specified and directed
580
-
-
Taking down carefully surface aluminum /copper point wiring, casing capping /PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.
69
-
-
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concelled rigid non matalic PVC conduit medium grade size not less then 20mm dia ISI marked with all conduit fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with and including 3mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators etc for one light point controlled by one switch incl making good the disturbed portion complete all as specified and directed.
48
-
-
,---ditto--- all as per item No. 106 above but for one fan point controlled by one switch complete all as specified and directed.
6
-
-
,---ditto--- all as per item No. 106 above but for one 3 pin 5 Amp socket outlet controlled by one switch on same board with other switches complete all as specified and directed.
3
-
-
,---ditto--- all as per item No. 106 above but for one 3 pin 5 Amp socket outlet controlled by one switch on independent board with other switches complete all as specified and directed.
3
-
-
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concelled rigid non matalic PVC conduit medium grade size not less then 20mm dia ISI marked with all conduit fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with and including 3mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators etc for one 3 pin, 16 Amps socket outlet point controlled by one swith on independent board incl making good the disturbed portion complete all as specified and directed.
9
-
-
S&F angle holder, insulated polycarbonate body with back plate complete all as specified and directed.
3
-
-
S&F switch piano flush button single pole one way 6 Amp complete all as specified and directed.
60
-
-
S&F switch piano flush button single pole one way 16 Amp complete complete all as specified and directed.
9
-
-
S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps combined flush type compete complete all as specified and directed.
9
-
-
S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type compete complete all as specified and directed.
6
-
-
S&F ceiling rose 3 plates polycarbonate body complete all as specified and directed.
45
-
-
S&F MCBs Distribution board SPN, 8 ways, powder coated, CRCA steel sheet, degree of protection IP-43, IK-09 with reversible double door, 240V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed. Note : MCCB, MCBs and MCB DB shall be of the same make.
3
-
-
S&F MCBs of 'B' curve single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
18
-
-
S&F MCBs of 'B' curve double pole 40 to 63 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
3
-
-
S&F LED light fitting 1 X 10watt (2 feet), decorative ultra slim type with integral driver complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal complete all as specified and directed.
30
-
-
S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI80, THD10% and PF0.95 complete all as specified and directed. Make - Philips Cat part BN308C LED20S-6500 L120 PSU WH, Crompton Cat part CIS-305-40-57-SL-DP-NWH, Havells Cat no STOUTPLUS600BS20WLED840SPCWH.
15
-
-
M&L for sub main wiring with two run of 6 Sqmm single core, PVC insulated, unseathed, FRLS multistranded copper conductor cable alongwith one run of 6.0 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed PVC conduit of 20mm dia ISI marked ivory colour & accessories of suitable size including making connection as required complete all as specified and directed. NOTE - Two run of 6 sq.mm phase and neutral wire & One run of 6 sq.mm earth wire & One run of PVC conduit with accessories shall be measured as One length.
91
-
-
Taking down MCB distribution board with incoming and outgoing controls any make and capacity after disconnecting complete all as specified and directed.
3
-
-
Taking down carefully sub main wiring with PVC casing capping / PVC surface conduit and making good disturbed surfaces complete all as specified and directed.
91
-
-
S&F exhaust fan, 300mm sweep, 1440 RPM, heavy duty, metal body, ISI marked, AC single phase, 230V, 50 Hz complete with louvers, blade and frame complete with insulated 3 core copper cable of size 0.75sqmm complete all as specified and directed.
Note : Old U/S shall be returned to MES store
6
-
-
Taking down carefully storage type water heater (geyser) any make and capacity from clamp/bolts including disconnecting water and electric connection and re fixing the same and connecting up after cleaning of geyser and repair complete all as specified and directed. (Note - Repair work shall be measured and paid separately under respective items of BOQ ).
6
-
-
Opening up geyser of capacity 25/50 litre, checking defect, taking out u/s parts and re-assembling after carrying out repair / renewal work including nuts / bolts / washers / gaskets / fusible plug etc wherever required and minor parts complete all as specified and directed. (Note - U/s parts shall be measured separately under relevant item of schedule as supply only).
6
-
-
Supply only geyser apparatus plate (any make, any type) copper alloy chromium plated suitable for geysers 25/50 litre capacity including rubber gasket, nuts / bolts etc complete.
6
-
-
Supply only heating element 2.0 KW, 230 volts, ISI marked suitable for 25/ 50 litre capacity geysers of any type as required.
6
-
-
Supply only thermostat ISI marked suitable for 25/50 litres geysers as required complete.
6
-
-
Supply only stainless steel inner tank suitable for 25 litre capacity geysers housing complete.
2
-
-
M&L for repairing of inner copper tank of geysers 25/50 litre capacity with gas welding not exceeding 5 mm thick to make it leak proof complete all as specified and directed.
2
-
-
S&F in repair of brass chromium plated, flexible pipe connection 15 mm bore 450 mm long heavy duty suitable for hot water supply with two numbers brass chromium plated nuts at end complete all as specified and directed.
12
-
-
M&L for painting of geyser 25/50 litre with two coats of synthetic enamelled white paint after removing old paint and preparation of surface and writing MES No (Letters height 10 cm) complete all as specified and directed.
6
-
-
S & F in repair 20 amp single pole and neutral enclosure with 2 pole and earth metal enclosed plug top in powder coated CRCA steel sheet enclosre recess mounted with chained matel cover for socket out let with and incl one no single pole B curve MCB 20 Amps complete all as specified and directed.
6
-
-
S&F water heater 25 litre capacity BEE star rating 5, approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C, outer tank made of metal, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.
3
-
-
S&F in repair of PVC insulated over all PVC sheathed three core copper cable of size 2.5 sqmm complete all as specified and directed.
16
-
-
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements