Military Engineer Services Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_675911_1Bid Award Id
ViewTender No
GE/JODH (A) NO 1- OF 2024-25 (9266/E8)Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Taking down shutters of any description area exceeding 1.0 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.
40
-
-
M&L for 35mm thick factory made 2nd class hard wood glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and directed.
72
-
-
S&F35 mm thick factory made second class hard wood plain framed panelled shutter (Two panel) with lock rail and pannel of 9 mm thicks BWP commercial ply or 12mm veneered particle board with commercial veneered on both faces the size of rails and style as per IS-1003 (Part-I) kiln seasond and chemicadly pressue treated all as specified and directed.
36
-
-
M&L factory Made flush shutters, 35 mm thick solid core construction with particle board both face covered with decorative face veneer, as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.
10
-
-
M&L for framed brackets for door frames and cooler stand made of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 and used for step/stairs, complete all as specified and as directed.
400
-
-
S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, all as specified.
42
-
-
M& L for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified.
150
-
-
S&F aluminium alloy fabricated type handle extruded section of size 150mm long complete all as specified and directed.
270
-
-
S&F aluminium anodised barrel tower bolts of extruded section of 200 mm size complete all as specified and as directed.
270
-
-
S&F aluminium alloy anodised sliding door bolt with hasp and staple [bolt type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
150
-
-
S&F butt hinge of size 100mm , medium weight, cold rolled mild steel, complete all as specified and as directed.
300
-
-
S&F stainless steel butt hinge of size 100mm, complete all as specified and as directed.
180
-
-
S & F 100mm size single action door spring hinge complete all as specified and directed.
150
-
-
S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm long complete all as specified and directed.
150
-
-
S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item, complete all as specified and as directed.
200
-
-
M&L for PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in coping/ benching, DPC, pier caps, bed blocks, for hold fast etc., including mixing with WPC and necessary form work, complete all as specified and as directed.
Note:- WPC shall be measured and paid separately.
5
-
-
M&L for powder coated Anodised aluminium frame for doors, windows , ventilators, partition, with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engr in charge.
80
-
-
Supply and fix rubber beading complete all as specified.
150
-
-
M&L 5mm Sheet glass, selected quality and glazing with oil putty in squares exc 0.5 sq. m in each pane
25
-
-
S & F Door closer hydraulically regulated, Aluminium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed complete all as speciied.
4
-
-
S&F brass body 2 levers mortice lock vertical type size 100 mm for aluminium door (as per sample) complete all as specified and directed.
4
-
-
M&L powder coated anodised aluminium shutter for door including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, screws etc. complete all as specified.
30
-
-
M&L for fabrication of glazed windows/louvered ventilators etc using powder coated anodised aluminium sections for frames with or without rebate for hinged/sliding windows (two track/three track), ventilators etc with louveres having suitable mechanism for tilting, U shaped fillets for securing jalies etc & the likes & fixed in position complete all as directed. Note : Glass panes & aluminium wiremesh shall be measured & paid for seperately.
25
-
-
S&F powder coated anodised aluminium deco grill as per sample fixed to aluminium frame work of windows & ventilators.
20
-
-
S&F aluminium alloy wire cloth 0.35 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.
20
-
-
S&F PVC wall lining consisting of 5mm thick wood grain printed PVC sheet including solvent cement and PVC frame complete all as specified and directed.
20
-
-
Dismantling of wall and ceiling board ( fiber , pulp , insulation , etc ) or insulation ,etc.) or insulation board/ slabs/ blankes , any thickness including over fillig.
125
-
-
S&F 10-12 mm thick PVC laminated gypsum board false ceiling size 595x595mm of relevant IS with powder coated aluminium snap grid of size (600 x 600 mm) by fixing of hanger 6 mm dia GI ( up to 2000 mm length) adjusting level fix to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long complete all as spacified
125
-
-
Taking down steel windows and ventilators ( glazed / fly proof) of any description complete all as specified and as directed.
100
-
-
S&F factory made box type windows (steel) (BWM) with side hung shutter including cooler opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed. Note : (i)-Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.
(ii)- Guard bar, Glass panes & wirecloth shall be measured and paid seperately.
20
-
-
All as per item No. 33.00 here-in-above, but without glazing bars
20
-
-
All as per item No. 33.00 here-in-above, but without cooler opening
25
-
-
All as per item No. 35.00 here-in-above, but without glazing bars
25
-
-
S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and as directed.
5
-
-
All as per item No. 37.00 here-in-above, but without glazing bars, complete all as specified and directed.
5
-
-
M&L for rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.
400
-
-
M & L for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over & including M&L single coat of pink primer complete all as specified and as directed.
300
-
-
M&L preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L single coat of red- oxide, zinc chrome primer complete all as specified and as directed.
150
-
-
M&L for preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .
50
-
-
Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and as directed.
100
-
-
M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and as directed.
90
-
-
S&F of 4mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty, complete all as specified and as directed.
10
-
-
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm, complete all as specified and as directed.
110
-
-
S&F continuous hinges mild steel bright finish or electrogalvanised width of flap 30mm, complete all as specified and directed.
100
-
-
M&L for 2nd class hard wood, plain ,solid ,straight chowkats and frames , wrought , framed rebated on the solid, rounded or chamfered , put together with glue pinned at joint, complete all as specified and directed.
0.05
-
-
M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,and cupboard shutter all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed .
30
-
-
S & F Auto hinges, stainless steel, complete assembly complete all as specified and directed.
30
-
-
S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters
15
-
-
S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers.
10
-
-
M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil as directed by Engineer-in-charge
50
-
-
S&F in repair 18 /19 mm thick pre laminted particle board exterior grade prelaminated both sides and decorative choice fixed for kitchen cupboard and shelving, complete all as specified and directed.
50
-
-
S&F magnetic catches for cabinet of size 50 mm complete with striking plate and magnetic stud complete all as per approved sample, complete all as specified and directed.
20
-
-
S&F 40mm dia cupboards knobs fixed with nuts screw and washer of aluminium anoised, complete all as specified and directed.
40
-
-
S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed.
500
-
-
M &L in repair for fabrication of pressed steel cupboard shutters using 0.80 mm thick MS plain sheet & with frame 1.00 to 1.25 mm thick bent to shape incl two coats of synthetic enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc., complete all as specified and as directed.
30
-
-
M&L for repair to pressed steel cupboard shutter including replacement of hinge, mortice lock, handle etc and fixed to wall making them in serviceable condition and refixing on same opening making the wall surface good condition as per directon of Engineer -in -Charge .
35
-
-
M&L for repair to window including taking down replacement of unserviceable hinges device box type handle making them serviceable condition and refixing on same opening making the soffit and jamb good condition as per directon of Engineer -in -Charge .
100
-
-
Repair to aluminium window/door and replacement of unserviceable hinging device, handles, loose glass , rubber gasket, making them in serviceable condition including taking down and re-fixing in same opening complete all as specified as directed.( Note: Hydrolic door closer, door spring,glass shall be measured and paid seperately.)
20
-
-
Resecuring or easing and adjusting shutters of any description and in any position,n exc 1 Sqm each with taking down of sutters and refixing in same opening after necessary repair complete all as specified and directed.
50
-
-
All as per Item No 62.00 HERE-IN- above but exc 1Sqm but not exc 2Sqm each.
100
-
-
M&L for powder coated aluminium doorseal 1000 mm long, 30 mm wide including dust/insect arrestor complete all as specified and directed.
80
-
-
Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed.
900
-
-
M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.
700
-
-
M&L for 10 mm thick Rendering in CM 1:3 on fair faces of brick work or conc surfaces as in ceilings/chajja/facia & finished even & smooth w/o using extra cement, complete all as specified and as directed.
150
-
-
M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.
150
-
-
M&L preperartion of newly plastered surfaces of wall and applying two wall putty & applying two coat of oil bound distemper complete
500
-
-
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.
35
-
-
M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring, path, foundation etc complete all as specified and directed.
25
-
-
M&L 40 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring/hard standing laid in alternative bays using glass dividing strips including finishing cement concrete surface even and smooth without using extra cement complete all as specified & as directed. Note:- Glass dividing strip shall be measured & paid separately.
200
-
-
M&L 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.
120
-
-
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
400
-
-
Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.
5
-
-
M & L chequered cement concrete tiles(laquer coated) 30cm x 30cm x 25 mm thick / 20cm x 20cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry as in floors/ path etc over and including screed bed or bedding layer of 15mm thick in CM 1:6 complete all as specified and as directed.
150
-
-
Dismantling, stone slab, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed.
40
-
-
M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), to receive floor finishes, complete all as specified & directed.
355
-
-
M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
50
-
-
All as per item No. 79.00 here-in-above, but size of tile exceeding 0.18 Sqm but n.exc. 0.38 sqm .
250
-
-
All as per item No. 80.00 here-in-above, but as in skirting over & including M&L 10 mm thick backing coat in CM 1:4 complete all as directed.
40
-
-
M&L for glazed colour ceramic tiles (premium quality) of size 250X450X6-7mm / 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 15mm thick backing coat in CM (1:6) complete all as specified and directed.
300
-
-
M&L for Machine cut kota stone slab flooring 20-25 mm thick as in floor over 15mm thick screed bed in CM 1:6 base laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition of stone or tiles laid bedded and pointed in any mortar.
30
-
-
M&L for machine cut kota stone slab 18 to 20mm thick as in risers, dado, steps, tread, skirting & etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10mm thick screed bed in CM 1:4 including dismantling of stone slabs of any description complete all as specified and as directed.
10
-
-
M&L for 16 to 18 mm thick Udaipur green stone in single piece as required, as in tread, cills, steps, risers, cooking platefoRM & etc., machine cut, (table rubbed and granite polished) best quality as per sample, over & including 15 mm thick screeding in CM1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone, complete all as specified and as directed.
20
-
-
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified.
5
-
-
M&L for rolled mild steel confiRMing Fe-290 (Gde E-165) in door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering ) and hanging also fastening and fixing complete all as specified and as directed.
500
-
-
Demolition, stone slab, floor, hearth or wall tiling laid dry or laid dry and pointed rubbish off the premises, complete all as directed.
0.5
-
-
M&L stone slab 5 cm thick dressed true and square, in one length not less than 60cm and n. exc 200cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints, exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and as directed
100
-
-
M&L for framed brackets for cooler stand as shown in Drg No CEJZ/TD/72/2015 sheet1/1 of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, confoRMing to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') and used for step/stairs, complete all as specified and as directed.
500
-
-
Demolition of stone / boulder masonry walling or brick or PCC block masonary, built in cement mortar including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed.
80
-
-
M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.
70
-
-
All as per item No. 92.00 here-in-above, but except stone
10
-
-
Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.
368.42
-
-
M&L precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in solid block masonry 10cm thick and setting in cement mortar 1:4 complete all as specified & directed by Engineer-in-charge.
20
-
-
Demolition of cement concrete of any description and in any position of any description and bedding in any type of location and removing rubbish to out side MD Land complete all as specified and as directed.
1
-
-
M&L for 15mm thick rendering in cement mortar 1:3 using sunken area, WPC @ 3% by weight of cement or with mixing liquid water proofing compound as per manufacturer instructions complete all as specified and as directed. Note : WPC shall be measured and paid seperately.
35
-
-
Supply only water proofing compound, complete all as specified.
10
-
-
M&L for 50mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregates with mixing liquid water proofing compound as per manufacturer instructions, as in subbase of sunken floors, laid in slope 1:40 to the surface of RCC slab shall be made even and smooth without using extra cement when concrete is still green complete all as directed. Note : WPC shall be measured and paid seperately.
35
-
-
M&L for applying a layer of APP membrane 3mm thick as specified above shall be laid by torch application method as per manufacturer instructions over and including one coat of cold emulsion bitumenous primer @ 0.25 Kg/sqm shall applied on plastered surface including side walls, including 25 mm thick cushion layer of coarse sand shall be provided over APP as in protecting layer for membrane, complete all as specified and directed.
35
-
-
M&L for PCC (1:5:10) lean cement concrete type E2 using 40 mm graded stone aggregate in mass concrete after carrying out satisfactory testing of CI pipe/ PVC pipe joints and slab /wall by filling water for 72 hours, complete all as specified and directed.
Note:- Nahani/ floor trap and pipe joints shall be embedded in PCC 1:3:6 type C1 complete.
3.5
-
-
S&F 32 mm dia bore light grade galvanised steel water tubing provided 30cm beyond wall surface to drain out leakage if any. The mouth of GI pipe shall have Gravel to avoided chocking. The top of sunken portion of RCC slab to be finished such that its slope towards spout.
5
-
-
S & F in replacement white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap, including M&L brackets, flush HDPE pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts & fixing arrangement of cistern, complete all as specified and as directed.
25
-
-
S&F in replacement vitreous ware wash down anglo-Indian type water closet [Semi-Pedestal Pattern], white [ETWC] including plastic water closet seat back soft closed pattern with flat bottom and cover & jet and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and directed.
10
-
-
S & F in repairs vitreous china ware wash hand basin, white, flat back of size 300 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long screwed for iron pipe complete all as specified and as directed
20
-
-
S & F in repairs vitreous china ware wash hand basin, white, flat back of size 300 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long, complete all as specified and as directed.
20
-
-
S & F in repairs stainless steel kitchen sink without drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
10
-
-
S & F in repairs stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
10
-
-
S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.
30
-
-
M&L replacement of internal flushing cistern fitting (accessories kit) for low level, make as per existing fitting all as specified and as directed.
30
-
-
S & F in repair 75mm dia out let, PVC ( SWR) floor trap with grating including jointing to waste pipe with solvent complete all as specified and as directed.
30
-
-
S & F in repair PVC connection of 15mm bore and 450mm long with PTMT nuts complete all as specified and as directed.
50
-
-
S & F in repairs fancy type chromium plated Bib tap, cast copper alloy, 15 mm dia, with crutch or butterfly handle, screwed down for iron pipe etc complete all as specified and as directed.
50
-
-
S & F in repairs fancy type chromium plated Bib tap, long body, cast copper alloy, 15 mm dia, with crutch or butterfly handle, screwed down for iron pipe etc complete all as specified and as directed.
50
-
-
S & F in repairs, stop valves, 15 mm dia, cast copper alloy , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe etc complete all as specified and as directed.
35
-
-
S&F as in repairs of stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20 mm dia all as specified specified.
20
-
-
S&F as in repairs of stop cock regular body with adujstable wall flange with fancy type chromium plated with (concealed type) 15mm dia for iron pipe etc complete all as specified and as directed.
15
-
-
S & F in repairs angle cock, 15 mm dia, cast copper alloy , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe etc complete all as specified and as directed.
20
-
-
S & F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed (minimum weight 15 mm 90gm), screwed both ends for iron pipe etc complete all as specified and as directed.
50
-
-
S & F in repairs pillar tap, cast copper alloy, chromium plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.
30
-
-
S&F in repairs PVC Flexible waste pipe 32 mm to 40 mm dia with socket for steel sink/WHB upto floor level and any length but not less than 0.85 Mtr, complete all as specified and as directed.
80
-
-
S&F in repair 15 mm bore CP brass two way angular stop cock, screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe complete all as specified and directed.
10
-
-
S&F in repairs shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats ( minium weight 300 gram, size 450x125x25mm) complete all as specified and directed.
5
-
-
S&F in repair CP brass health faucet with 1200 mm long flexible tube with wall hook and chromium plated two way angle valve, complete all as specified and as directed.
30
-
-
S&F in repairs plastic water closet seat cover white closed patteren with flat bottam and cover and mild steel chromium plated or al hinges device complete all as specified and as directed.
30
-
-
S&F in repairs of CP mild steel grating with or without hole 125 mm dia, complete all as specified and as directed
30
-
-
S&F in repairs of chromium plated swivel joint shower rose of 100 mm dia, cast copper alloy fixing with 15mm bore pipe, with Shower aRM 15 mm size, 195mm long with bend of 45degree with flange, complete all as specified and as directed
30
-
-
S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
50
-
-
S&F in repairs PVC Cabinet mirror of size ( 355mmx 455mm ) of selected quality glass and fixed to plugs with chromium plated brass screws and cup washers complete all as specified.
10
-
-
S&F stainless steel plate rack of size 750mm X 600mm X 200mm of approved pattern made out of stainless steel sheet 1 mm thick with round 8mm dia rods complete all as specified and directed.
5
-
-
S&F in replacement 500 ltrs capacity rotational moulded polythene water storage tanks, white coloured, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I, including demolition of existing RCC tank of internal size 1.20 m X 0.80 m X 0.60 m with 10 cm wall thickness, mounted on roof & removal unserviceable materials, debris and rubbish to a distance out side MD land and including M&L 100mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregates, as in platform over roof, size of plateform is more than 10 cm from tank dia and including M&L15mm thick plastering in cement mortar 1:4, finishing even & smooth without using extra cement with making good all existing disturb surfaces, and with fixing arrangement complete all as specified and directed.
10
-
-
S&F in replacement rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with including dismantling old tanks complete all as specified and as directed.
40
-
-
All as per item No. 132.00 here-in-above, but tank capacity 1000 Ltrs capacity
8
-
-
S & F in repairs ball valves 20mm dia bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms .
50
-
-
Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place of capacity exc 250 ltrs but n exc 500 ltrs complete all as specified and directed. Note :- If any accessories damaged occur during the cleaning of tank, the same shall be replaced by the contractor at his own arrangement and nothing extra shall be paid.
150
-
-
All as per item No. 135.00 here-in-above, but tank capacity exceeding 500 ltrs but not exceeding 1000 Ltrs.
3
-
-
M&L for cleaning of spot blockage of man holes,Gully trap, Nahani trap, floor trap etc of any type including cleaning of sludge & removing to out side of residential bldg man hole size 1.2x1.2 and up to depth of 1.5 metre with complete cleaning and removing of blockage by any means in between trap or manholes complete all as specified and directed.
50
-
-
M&L for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings to smooth flow of water from Bib taps/shower rose/WHB pillar tap/Stop valves complete by Air pressure/ water gravity pressure etc. Complete all as specified & directed.
120
-
-
Replacement of overhead tank lid of size suitable for 250 ltr to 500 ltr capacity tank
300
-
-
S&F in repairs to water tanks with cover, hoisted and fixing in position of capacity exc 500 and not exc 1000 Ltrs.
4
-
-
Replacement of hexagonal nipple of water tanks all as directed.
40
-
-
Taking down existing old tar felt from RCC roof ,stone roof etc .care fully including cleaning the roof surface by wire/coir brush and removing all girts ' stone fungus and finally washing down with water to the entire satisfaction of engineer in charge and remove debries and rubbish out side MD land all as specified and as directed.
500
-
-
M&L for plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in roof padding over roof for making good depression / undulation to make the existing as filling in depression of roof slab, complete all as specified & directed.
50
-
-
M&L plain cement concrete (1:2:4) type B-1using 20mm graded crushed stone aggregate as in roof kerbs or mud steps, rounded or chamfered on edge, fixing of holdfast etc complete all as specified & directed.
5
-
-
M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen confoRMing to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 2.00mm having weight not less than 3.00 Kg/Sqm, mineral gravel finish on top, using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen confoRMing to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.
400
-
-
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 100/110mm bore, complete all as specified and as directed.
100
-
-
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as specified and as directed.
85
-
-
S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
90
-
-
S&F 110mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor complete all as specified and directed
10
-
-
S&F 75mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor complete all as specified and directed
10
-
-
S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
75
-
-
S & F 110 mm bore PVC [SWR] branch piece, single [single "Y"] equal or unequal complete all as specified and as directed.
5
-
-
S&F 110 mm bore (SWR) PVC bends any radius complete all as specified and as directed.
5
-
-
S&F 75 mm bore (SWR) PVC bends with oval acess door, complete all as specified and as directed.
5
-
-
S&F PVC SWR vent cowl 110mm, complete all as specified and as directed.
5
-
-
S&F PVC SWR vent cowl 75mm, complete all as specified and as directed.
5
-
-
S& F in repairs 75mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed..
5
-
-
S& F in repairs 110 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed.
10
-
-
Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.
30
-
-
All as per item No 159.00 here-in-above, but size of pipe 20 mm bore.
100
-
-
All as per item No 159.00 here-in-above, but size of pipe 15 mm bore.
150
-
-
S&F GI water tubing medium grade, 25 mm bore size, galvanized, with all fittings fixed to wall, ceilings or laid in floors, complete all as specified and as directed.
30
-
-
All as per item No 162.00 here-in-above, but size of pipe 20 mm bore.
100
-
-
All as per item No 162.00 here-in-above, but size of pipe 15 mm bore. including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.
150
-
-
S&F 15/20 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engineer-in-charge.
15
-
-
M& L for Providing precast cement concrete Type B-0 1:2:4 (12.50mm graded aggregate) set in cement mortar 1:4 for louvres and jallie, cement grill any type moddle of Zafri 25/35mm thick (measured solid), including post and all mould- ingscomplete all as specified and directed.
200
-
-
Racking out joints/ pointing to squared rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed.
100
-
-
M&L keyed pointing in cement mortar (1:3) to squared rubble masonry regular coursed or un coursed complete all as specified & directed.
100
-
-
Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete
48
-
-
M&L for Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ( ISI Marked) passing in PVC cassing-N-capping 25/32 mm dia fixed on surface of wall/roof/ceiling withexisting/new sunken pressed steel terminal boxes including 3.00 mm thick plastic laminated sheet top cover and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly material and labour suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed
12
-
-
All as per item No 170.00 here-in-above but One socket outlet 3 pin 5/6 Amps on same board
4
-
-
All as per item No 170.00 here-in-above but One socket outlet 3 pin 5/6 Amp on independent board
3
-
-
All as per item No 170.00 here-in-above but with using 2.5 Sq mm single core multistanded copper conductor cable(FRLS) including 2.5 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) for common earth wire for 6 pin 16 Amp socket outlet on independent board .
3
-
-
M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates, suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed
12
-
-
All as per item No 174.00 here-in-above but One socket outlet 3 pin 5/6 Amps on same board
4
-
-
All as per item No 174.00 here-in-above but One socket outlet 3 pin 5/6 Amp on independent board
4
-
-
All as per item No 174 .00 here-in-above but with using 2.5 Sq mm single core multistanded copper conductor cable(FRLS) including 2.5 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) for common earth wire for 6 pin 16 Amp socket outlet on independent board .
3
-
-
Supply and fix switch piano flush type 6 amp single pole one way 230 Volts complete all as specified & directed .
38
-
-
Supply and fix switch piano flush type 16 amp single pole one way 230 V Complee all as specified & directed .
6
-
-
Supply and fix socket out let flush type 6 amp 3/5 pin suitable for 6 Amp plug top 230 V complete all as specified & directed.
14
-
-
Supply and fix socket out let flush type 3/6 pin suitable for 16 Amp plug top multipurpose 230 V complete all as specified & directed.
6
-
-
Supply and fix fan regulator electronic Switch/socket type complete all as specified and directed.
4
-
-
Supply and fixing lamp holder insulated body with back plate batten/angle type for batten fittings incl taking down old unserviceable holder complete all as specified and directed.
10
-
-
Supply and fixing in replacement ceiling rose 3 terminals complete incl taking down all as specified and directed.
14
-
-
S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete incl dismentaling of unservceable DB all as specified and directed by Engr-in-charge.
1
-
-
S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 10 MCB SP as out going SPN 12 way complete incl dismentaling of unservceable DB all as specified and directed by Engr-in-charge.
1
-
-
S&F replacement sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for one No 63 to 100 Amp 10 KA TPN MCCB as incoming complete incl dismentaling of unservceable DB all as specified and directed by Engr-in-charge.
1
-
-
Supply and Fix in replacement MCB Single pole"B" series 5-32 Amps ISI marked incl dismantaling old unserviceable MCB SP .
16
-
-
Supply and Fix in replacement MCB Single pole & neutral "B" series upto 63. Amps ISI marked incl dismantaling old unserviceable MCB SPN
4
-
-
Supply and fixing in replacement MCB TPN B Curve 63 to 100 Amps Make incl disntaling of old unserviceable TPN MCB
1
-
-
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified.
3
-
-
Supply and fixing in replacementLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
2
-
-
Supply and fixing replacement LED lights fitting 1x 20W, 220V, Cool White, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
70
-
-
Supply and fixing in replcement LED lights fitting 1x 20W, 220V, Warm White, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete
3
-
-
M&L in repairs sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. Note :- Two runs of cable 6 Sqmm (FRLS) and One run of 6 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length including taking down old UNSV submain wiring complete all as directed.
15
-
-
M&L in repairs sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit surface in walls with all required accesries of conduit ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. Note :- Two runs of cable 6 Sqmm (FRLS) and One run of 6 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length including taking down old UNSV submain wiring complete all as directed.
11
-
-
NOTE:- (i)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements