Military Engineer Services Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 96,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_676253_2Tender No
8272/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://defproc.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.
250
-
-
Refixing old steel tubing and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 20mm dia.
20
-
-
S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified.
70
-
-
S&F in repair rotational moulded polyethylene water storage tanks (white colour) (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position incl all necessary fittings (nipple, socket, union etc) complete all as specified in SSR Part I and removing to store with and including 20mm bore float valve with rod and ball complete all as specified and directed.
8
-
-
S&F in repairs vitreous china squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed
24
-
-
S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed. Make: JAQUAR/CERA/HINDWARE
16
-
-
S&F in repair vitreous china urinal half stall type white excluding flushing cistern , but including CP urinal spreader and waste pipe complete all as specified and directed
Make : JAQUAR/CERA /HINDWARE
8
-
-
S&F Vitreous china urinal partition of size 300mmx700mm of specified thichness fixed in position complete all as specified and directed
8
-
-
S&F repair vitreous china wash basin counter dual type white of size 550mmx400mm fixed in granite etc including 32mm dia CP brass waste coupling fitting and union complete all as specified and as directed Note: pillar tap shall be measured as supply only under respective items.JAQUAR/CERA/HINDWARE
16
-
-
S&F in repair PVC flushing cistern low level 10 ltr capacity with inlet ball valve float and handle syphonic action type including brackets and flush pipe of polythene of low or high density. Make ; JAQUAR/CERA/HINDWARE
40
-
-
S&F in repair PVC connection of 15mm bore with 2 Nos. PTMT nuts, 600mm long fixed with adapter and washers at both the ends complete all as specified and as directed
32
-
-
S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed
16
-
-
S&F in repair Floor Drainer with Collar and Cockroach Trap/Jali with or without waste hole all as specified and directed
24
-
-
S&F in repair brass chromium plated soap dish, complete all as specified.
16
-
-
S&F in repair 15mm dia bore cast copper alloy chromium plated fancy type pillar tap with out cold & hot water complete all specified and as directed. Make : JAQUAR Cat part No CON-021KN or equivalent of CERA/HINDWARE
16
-
-
S&F in repair 32 mm dia PVC flexible waste pipe for WHB/Sink 600 mm long with PVC coupling complete all specified and as directed
16
-
-
S&F in repair over head shower (fancy type) chromium plated 100mm round shape single flow (ABS body) with or without swivel joints, , including fixing to steel pipe or union all as specified and directed. Make : JAQUAR Cat part No OHS-1989
16
-
-
S&F in repair sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide chromium plated bracket guard and railing 60cm long complete all as specified & as directed.
10
-
-
S&F in repair 6 to 8mm thick looking mirror of selected quality frameless single piece fixed with chromium plated screws & cup washers & fixed complete all as specified & as directed.
15
-
-
S&F in repair 15 mm bore fancy type long body bib tap with wall flange chromium plated with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.JAQUAR Cat part No CON-107KN or equivalent of CERA/HINDWARE
40
-
-
S&F in repair 15 mm bore fancy type short body bib tap with wall flange, chromium plated with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.JAQUAR Cat part No CON-047KN or equivalent of CERA/HINDWARE
20
-
-
S&F in repair Stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make : JAQUAR Cat part No CON-053KN or equivalent of CERA/HINDWARE
50
-
-
S&F in repair 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed. Make : JAQUAR Cat part No CON-083FTK or equivalent of CERA/HINDWARE
16
-
-
S&F in repair stop valves 20mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
16
-
-
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed
1400
-
-
M&L rendering 10mm thick in CM (1:6) on fair faces of brick/stone masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.
500
-
-
M&L 15 mm thick rendering on fair faces of brick/stone masonary in CM (1:4) mixed with integral water proofing compound finished with even and smooth complete all as specified and directed.
Note : Water proofing compound shall be measured and paid separately under relevant item of this schedule.
298
-
-
M&L rendering 5mm thick in CM (1:3) on concrete surfaces in ceiling, soffits and the likes; finished even & smooth without using extra cement complete all as specified.
310
-
-
M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar (1:3) not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed
600
-
-
M&L preparing newly plastered surfaces & applying two coats of oil emulsion distemper (OBD) over with and including 2mm thick wall care putty complete all as specified and directed
448
-
-
Complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil grease spots etc using grinding machine on wall surfaces and preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper ( OBD) of approved shed/tint over and including a coat of white wall care putty 2mm thick and over a coat of primer complete all as specified and directed.
350
-
-
M&L preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer complete all as specified and dircted
1458
-
-
M&L preparation of old surrfaces of ceiling and applying two coats of white wash on ceiling.
175
-
-
Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.
10
-
-
Demolition of cement concrete (reinforced) in landing slab, chullah hoods, manhole covers, roofs, floors, beams, stair case, landing, chajja and similar suspended work complete all as specified and as directed.
2.5
-
-
Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed
850
-
-
M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.
250
-
-
M&L 75 mm thick PCC(1:3:6), Type C2 (using 40mm graded stone aggregate ) as in plinth protection finished fair and even, path laid in panel surface finished even and fair using extra cement and joints of panel shall be filled by bitumenous primer complete all as specified & directed.
160
-
-
M&L glazed coloured ceramic tiles in vertical surface 300mm x 600mm x 7 mm thick laid over with and including 10 mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified & directed.
680
-
-
M&L 15-18 mm thick Granite(of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the likes; in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over with and including 15 mm thick screed bed or bedding layer in CM (1:3), including grinding of edges to curved surface finish complete all as specified and directed.
25
-
-
M&L 75 mm thick PCC (1:4:8), Type D-2 (using 40 mm graded stone aggregate) as in sub base of floor/pavings complete all as specified and directed.
120
-
-
M&L PCC (1:4:8), Type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed
2
-
-
Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed
10
-
-
Taking down Chowkats or frames with shutters ( without taking off shutters from the frame) n.exc. 1.5 Sqm each & removing to store complete all as specified and as directed.
48
-
-
Taking down Chowkats or frames with shutters ( without taking off shutters from the frame exc 1.5 Sqm but n.exc 4 Sqm each & removing to store complete all as specified and as directed.
8
-
-
S&F in repair factory made PVC shutter of 18 mm thickness consisting of panel of 18 mm thick celluca ply of density 600 Kg/Cum density with prelaminated sheet on one side cut in desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted under shelves including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing. The measurement area shall be from elevation only.
25
-
-
S&F in repair continuous piano hinges, mild steel 30mm width of flaps, bright finish or electrogalvanised complete all as specified and directed
4
-
-
S&F 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed
120
-
-
S&F 125mm size extruded aluminium alloy handles, fabricated type anodized, ISI marked and fixed complete all as specified & directed
120
-
-
S&F extruded aluminiu alloy with galvanised mild steel hing pin butt hinges 100mm long
180
-
-
S&F rolled mild steel section as in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and directed.
320
-
-
Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed
34
-
-
S&F Aluminium window/ventilator made of aluminium powder coated section half fixed and half louvers type and small window single leaf cut to size, jointed together with cadium plated steel screwes including rubber packing aluminium beading or gasket for aluminium section for fixing of glass sheet and necessary fittings complete screwews plugs complete all as directed Note : Weight of aluminium section shal only measured (ii) The supply only rate for glass sheet will measured separately
25
-
-
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.
40
-
-
S&F sheet glass, ordinary quality 4.80 mm thick fixed with rubber beading and clips size of glass n.exc 2 sqm in each pane complete all as spd & directed.
15
-
-
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour (Glossy/Lacquer) design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
105
-
-
M&L PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) for 100 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed
128
-
-
Excavation in trenches n.exc. 1.5 Mtr wide and n.exc. 1.5 Mtr in depth for foundation and getting out in soft/loose soil complete all as specified and directed.
121.44
-
-
Excavation in trenches n.exc. 1.5 mtr wide and depth exc 1.5 mtr but n.exc 3.00 mtr for foundation and getting out in soft/loose soil complete all as specified and directed.
5
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
76.48
-
-
Removing excavated material, n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.
50
-
-
Cutting Chases exc 10 cm but n.exc 20cm in girth in brick/stone wall for fixing of PVC Pipe/GI pipe of 15 & 20 mm bore (concealed in wall) including making good disturbed surface in CM (1:4) and to match with the existing surfaces complete all as specified and directed.
150
-
-
M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.
3
-
-
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.
6
-
-
M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius built in CM (1:4) as in half brick thick wall complete all as specified and as directed.
120
-
-
M&L design mix M-25 (using 20mm graded stone aggregate) as in foundation including footing, plinth beam, base for column, etc complete all as specified and directed.
5.5
-
-
M&L design mix M-25 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.
15
-
-
M&L design mix M-25 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers and lintels over 1.5m span complete all as specified and directed.
3
-
-
M&L design mix M-25 (using 20mm graded stone aggregate) as in slabs sopported on walls, beams and columns in floors, roofs etc complete all as specified and directed.
5.4
-
-
M&L design mix M-25 (using 20mm graded stone aggregate) as in chajjas and the likes; complete all as specified and directed.
0.75
-
-
M&L 50mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
20
-
-
M&L PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in landing, cover slabs (for manholes etc) chajjas, water troughs, mangers, shelves and similar article with plain faces complete all as specified and directed.
3
-
-
Providing PCC (1:2:4), type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamferred on edges complete all as specified and directed.
0.55
-
-
M&L mild steel (TMT bar)10mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for hooping for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia.
3475
-
-
M&L mild steel (TMT bar) 6mm to 8mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for hooping for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia as in stirrups, spacers, binders etc.
30
-
-
M&L mild steel (TMT bar) 5mm to 10mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for hooping for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia as in stirrups, spacers, binders etc.
415
-
-
M&L form work to side of concrete foundation , footing, bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and as directed
20
-
-
M&L form work to side of pillar, posts, struts, piers, columns etc complete all as specified and as directed
102.4
-
-
M&L form work to sides and soffits of floor or roof beam, beam haunching, griders, bressummers lintels, cantilevers, shelves including supprots, overhangs etc also splays between floors and beams etc complete all as specified and as directed
20
-
-
M&L form work as in suspended slab, such as roof slabs, floor slabs, landings and similar work, not exceeding 20mm thick(Horizonal or sloping) complete all as specified and as directed
55
-
-
M&L form work to cullaah hoods, chajjas, throughs and similar items including edges comlete all as specified and as directed
2
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
4
-
-
M&L cutting into existing manholes / Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 100mm bore pipe.
3
-
-
Taking up cast iron 75/80mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead.
75
-
-
Taking up cast iron 100mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead.
95
-
-
M&L 75mm bore cast iron spun pipe, any length with or without ears, with lead joints fixed to walls or in floors complete all as specified and directed.
75
-
-
M&L 100mm bore cast iron spun pipe, any length with or without ears, with lead joints fixed to walls or in floors complete all as specified and directed.
95
-
-
S&F in repair CI floor trap size 75mm dia out let with CP grating including connection to waste pipe with lead jointing including taking down existing trap complete all as specified and directed
15
-
-
S&F in repair CI floor trap size 100mm dia out let with CP grating including connection to waste pipe with lead jointing including taking down existing trap complete all as specified and directed
15
-
-
S&F in repair cast Iron P or S trap 100mm dia out let waste pipe with jointed in CM (1:1) complete all as specified and directed
8
-
-
S&F in repair CI bends any radius 75mm bore complete all as specified and directed
8
-
-
S&F in repair CI bends any radius 100mm bore complete all as specified and directed
8
-
-
S&F for Pipe Supporting Clamping - 2 Nos for 20mm & 2 Nos for 15mm bore GI pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 ( 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 3" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE. complete all as specified and directed
24
-
-
M&L taking down and removal of loose / disintegrated old concrete up to 50mm depth/ plaster and cleaning all loose dust washing with water and epoxy bondsmaterilas of pidilite/Dr fixit with new cement plaster /polymer modified plaster/concrete /screed concrete wth old surface etc complete all as specified and directed.
150
-
-
M&L applying 15mm thick plaster with polymer modified mortar in proportion 1:3 by weight 5 litres SBR 45 to added to 50kg cement with 13 litre water addition finished surface to match with existing adjoining surface of ceiling, beams and alike complete all as specified and directed. Make : Nitobond/Fosroc/Dr fixit
150
-
-
M&L applying two coats of 2 component zinc based epoxy rust preventer on corroded reinforcement after cleaning and removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughly cleaning washing air blowing brushing etc complete.
Note : Qty of zinc based epoxy rust prevent or only shall be taken into account for payment purpose on the basis of actual consumption.
40
-
-
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X100mm mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardanand fixed in position with MS hold fast/ugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately). →
Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra
payment on this account shall be made
250
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
80
-
-
Demolition and breaking up drain pipes (Salt glazed stone ware, AC, or Reinforced concrete) or 100mm dia set in cement mortar including PCC bed to drain pipe, packing under & haunching against the sides of drain pipes complete all as specified & directed
130
-
-
S&F 75mm thick steel fibre reinforced concrete (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.
5
-
-
M&L 150mm bore reinforced concrete pipe, class NP2, laid and jointed in CM (1:1) complete with collars including demolition and breaking up old existing pipe all as specified & as directed.
130
-
-
M&L 25mm thick precast cement concrete louvers and jalies (measured solid) including all mouldings but excluding frame complete all as specified and directed.
50
-
-
Treatment of sunken portion as per following courses :-
(a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion including vertical wall surface complete as directed. (b) Maintain the Sunken to a slope of 1:40 outward with 32mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (c) Top of the sunken floor slabs shall be laid to a slope 1:40. The surface of RCC slab shall be made even and smooth by using extra cement while the concrete is still green. Concave fillet in PCC (1:2:4) type B0 of radius 75 mm shall be provided at the junctions of RCC slab and adjoining walls. (d) Floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight of cement. Over plastered surfaces, a layer of APP based polymeric membrane not less than 3mm thick, weighing not less than 3 kg per sqm, reinforced with polyster non- woven fabric (weighing not less than 150 gm per square metre) shall be laid by torch application. Side overlaps shall be 100mm and the ends laps shall be 150 mm and overlap joints shall also be sealed by torch application. (e) The sunken portion shall be filled with lean cement concrete (1:5:10), type E2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes / joints and slabs / walls by filling water for 72 hours. The sunken portion of Nahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks. (f) 32 mm dia GI spout shall be provided to drain out leakage, if any.
105
-
-
Taking down carefully copper/Aluminium point wiring for light/fan/socket/light fitting/power point and taking down of teak wood batten / PVC casing caping/PVC conduit/steel conduit and making good disturbed surfaces of walls/ceilings /floors etc with and including dismantling of fittings complete all as specified and directed.
148
-
-
M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one way switch all as specified & directed.
84
-
-
All as per serial item No. 108.00 here-in-before but for one exhaust fan point controlled by one switch and regulator
16
-
-
All as per serial item No. 108.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
16
-
-
All as per serial item No. 108.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
16
-
-
All as per serial item No. 108.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.
16
-
-
S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts
132
-
-
S&F switch piano, flush type, single pole, two way, 5/6 Amp, 230 Volts, modular type.
2
-
-
S&F switch piano, flush type, single pole, one way, 15 Amp, 250 Volts, modular type.
16
-
-
S&F socket outlet, 3 pin (with 2 pin outlet also), 5/6 Amps, flush type, 240 Volts, ISI marked.
32
-
-
S&F socket outlet, 2 in 1, 3 pin, 5/15 Amps flush type multipurpose with fuse & neon indicator, 240 volts, ISI marked.
16
-
-
S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.
52
-
-
S&F decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16 to 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed.Make : Havells cat part No. LHEXBHP71N1W018 or equivalent of philips/Crompton Greaves/ bajaj/Wipro/GE
52
-
-
S&F LED type street-DRACO SERIES light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed. Make: C&S Cat Part no. LTESS20WLED or equvalent Crompton Greaves /Wipro
8
-
-
S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.
24
-
-
S&F LED Bulb energy saving 10/11 W complete all as specified and directed Make :- Havells/Crompton/Syska
24
-
-
S&F sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar, 8 way, 240 Volts.
8
-
-
S&F MCB 63 Amp TPN, three pole & neutral, 415 Volt complete all as specified & directed.
4
-
-
S&F MCB 32/40 Amp, single pole & neutral,240 Volt complete all as specified & directed.
12
-
-
S&F MCB 6-40 Amp, single pole 240 Volt complete all as specified & directed.
72
-
-
S&F Sheet metal enclousure double door type ,suitable for fixing TPN with 200 Amps rated bus bar ,vertical DB 4 way TPN 415 Volts complete all as specified & directed.
Make : Havells/Phillips/Bajaj
4
-
-
Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 Sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed.
Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid separately under relevant items.
90
-
-
M&L brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.
0.6
-
-
M&L dry sand and punning for cushioning to under ground cable all as directed.
Note :- For the purpose of payment only punned thickness shall be measured.
5.83
-
-
S&F in repair 40mm dia GI pipe, Light grade for protection of LT cable fixed to walls/ poles/road crossing including clamps complete all as specified and directed.
12
-
-
S&F exhaust fan AC single phase 230/240 Volts of size 300 mm sweep with louver with and including cutting holes in brick/stone wall of required size carefully with and including taking out old exhaust fan of any description and making good the disturbed surfaces to match with the existing in CM (1:3) complete all as specified and directed.
16
-
-
S&F 25mm bore GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittings laid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion to match with the existing with and including taking down of old unserviciable pipe complete all as specified and directed. Note :-Excavation and earth work will be measured and paid separately under relevant items.
128
-
-
S&F sub main wiring on and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 with and including taking down existing unserviceable sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)
250
-
-
Disconnecting from electric connection and taking down carefully the existing ceiling fan/exhaust fan/Geyser of any capacity, any make , any size and depositing the same to the store yard of AGE E/M Alwar and refixing the old serviceable ceiling fan/exhaust fan/Geyser including electric connection complete all as specified and directed.
16
-
-
M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%