Military Engineer Services Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Military Engineer Services - MES Tender
Eprocure
Opening Date29 Oct 2024
Closing Soon26 Nov 2024
Tender Amount₹ 30,00,000
Costs
EMD
₹ 60,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_681784_1Tender No
8935-23/GE/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position not otherwise specifically provided and removal of rubbish outside MOD land complete all as directed by Engineer-in-Charge.
3
-
-
M&L for dark shade double charged Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc. over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
90
-
-
M&L for dark shade double charged Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 Sqm but not exceeding 1.00 sqm, in floor etc. over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
16
-
-
M&L for dark shade double charged Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm and not exceeding 1.00 sqm,on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
41
-
-
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.
45
-
-
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.06 Sqm but not exc 0.18 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.
10
-
-
M&L for glazed ceramic coloured tiles of size 450 x 350 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
182
-
-
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
7
-
-
Rounding off edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed
35
-
-
M & L for mirror polishing on marble/granite/kota stone work where everr required to give high gloss finish complete all as specified and directed.
10
-
-
Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all specified and directed directed.
4
-
-
Taking down chowkhats or frames exc 1.5 sq. m but n.exc 4.0 sq. m each with shutters (without taking off shutters from the frame) complete all specified and directed directed.
38
-
-
S&F for 4.8 mm thick sheet glass n. exc 0.50 Sqm in each pane, ordinary quality and glazing with aluminium snap beading of any size of glass in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufaturers all as specified and directed.
7
-
-
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed with glavnised wire staple etc., complete all as specified
7
-
-
Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required colour of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood, frame shall be covered with fibre glass from all sides. MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.
130
-
-
Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled door shutter conforming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.
43
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension Grade),calcium carbonate and natural fibres (wood powder/rich husk/wheat husk) and non toxic additives (maximum toxicity index of 12 to 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) and 1100N (edge), minimum compressive strength 50 N/ mm ² ,modules of elasticity 850 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges (02 Nos in each shutter) of required size with necessary full body threaded star headed counter sunk S.S scrwes complete all as specified and directed.
3.2
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames / Chowkhat of size 45 x 70 mm comprising of virgin polymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.
9
-
-
S&F for 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.
15.12
-
-
S&F for 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by Engineer-in-Charge.
15.12
-
-
Supply only 300mm mild steel helical door spring rat tail type including roller plate complete all as specified and directed by Engineer in Charge
8
-
-
S&F for 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as directed.
8
-
-
M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as filling of sunken floors/bottom and side of drain complete all as specified & directed by Engr-in-charge.
3
-
-
S & F Pressed steel frames size 125 x 60 mm made out of 1.25 mm thick MS steel for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complet all as specified and directed by Engneer -in-Charge .
22.8
-
-
S&F 100 mm long butt hinge, extruded aluminium alloy with stain less steel hing pin, complete all as specified and directed by Engneer -in-Charge .
138
-
-
S&F 200 mm long aluminium anodised barrel tower bolt, of extruded sections complete all as specified and directed by Engneer -in-Charge .
92
-
-
S&F 150 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and directed by Engneer -in-Charge .
92
-
-
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests including P trap and concrete fixed complete all as specified and directed by Engineer-in-Charge.
7
-
-
S&F 300 mm long aluminium sliding bolt plate type stove enamelled black with bright bolt not less than 16 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified
20
-
-
Material & Labour for mild steel work conforming to Fe-290-0 grade E-165 as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, ladders, framed balusters, framed work of water tanks and similar works complete all as directed by Engineer-in- charge
45
-
-
S&F in repairs stainless steel curtain rods, standrad quality, not less than 28mm dia with heads , etc. complete all as specified and directed by Engr-in-Charge.
15
-
-
S & F anodised aluminium snap grid frame work size 605x605 mm for false ceiling complete all as specified and directed.
85
-
-
S & F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
85
-
-
M & L for perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size 12 mm thick, fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed.
85
-
-
S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Note : The sheet should b crimp curved and the ends.
100
-
-
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
11
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil complete all as specified and directed by Engneer -in-Charge
3
-
-
Returning filling in incl spreading, levelling watering and well ramming in layer n.exc 25cm thick complete all as specified and directed.
40.96
-
-
Removing surplus soil to a distance n. exc 50 m and depositing where directed at level n. exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge
31.26
-
-
Material and labour for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling & mass concrete complete all as specified and as directed by Engineer-in-charge.
4.5
-
-
Material and labour for PCC (1:3:6) type C1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edgs complete all as specified and as directed by Engineer-in-charge.
1
-
-
Demolition of brickwork or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge.
2.5
-
-
M&L for brick work with sub class 'B' bricks straight or curved on plan any radius half brick thick walls, built in cement mortar (1:4) all as specified & directed.
23.6
-
-
M&L for brick work with fly ash bricks straight or curved on plan any radius half brick thick walls, built in cement mortar (1:4) all as specified & directed.
8
-
-
M&L for old size brick work with sub class 'B' bricks bricks straight or curved any radius half brick thick walls, built in cement mortar (1:6) all as specified & directed.
2
-
-
Material and labour for brick work with Fly Ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge.
37
-
-
M&L for 40mm thick damp proof course in cement concrete 1:2:4, type B-0, 12.5 mm graded stone aggregate to horizontal or vertical surfaces including necessary formwork complete all as specfied and directed by Engr-in-Charge.
10
-
-
M&L for reinforced cement concrete type B1 1:2:4 using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, copings, bed plates,and the like including weathering, slightly rounded or chamfered angles and throating,incl formwork all as specified & directed.
Note :- Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
1.4
-
-
M&L for PCC 1 :3 : 6 type C-0 using12.5 mm graded stone aggregate in back fill of chowkhats and bed blocks for hold fasts etc complete all as specified and directed by Engneer -in-Charge
0.03
-
-
M & L for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc
33
-
-
M & L for Formwork to fair finished surfaces soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified & directed by Engineer-in- charge.
10
-
-
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like; all as specified and directed.
Note : Reinforcement shall be measured and paid seperately.
2
-
-
M & L for sand filling in floors or in foundations including watering and consolidation all specified and directed
8
-
-
M&L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge
5
-
-
M&L for 75 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.
10
-
-
Material and labour for 25 mm thick Cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in floor or laid under floor etc complete all as specified and as directed by Engineer-in-charge.
10
-
-
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
12
-
-
M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 on wall, finished fair even and smooth including mixing of WPC in mortar all as specified and directed.
280
-
-
M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:6 on wall, finished fair even and smooth all as specified and directed.
192
-
-
M & L rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finished fair and even without using extra cement complete all as specified & directed by Engr-in-charge.
58
-
-
M&L for two coats of acrylic distemper on newly plastered surfaces of walls over and including one coat of primer and 3mm thick wall care putty including preparation of surfaces complete all as specified and directed.
80
-
-
M&L for complete removal of existing treatment and finsh the wall with exterior paint or required shade, two or more coats applied @ 3.28 ltr/10 Sqm over and includign priming coat of exterior primer applied @ 2.20 Kg/10 Sqm on walls over 3 mm thick wall care putty on plastered surfaces of walls complete all as specified and directed by Engineer-in-Charge.
80
-
-
M & L preparing newly plastered or pointed surface of wall and finish the wall with textured exterior paint of required shade : New work, two or more coats applied @ 3.28 ltr/10 Sqm, over and including priming coat of exterior primer applied @ 2.20kg/10 Sqm on wall over a coate of primer 3 mm thick wall care putty complete all as specified and directed by Engineer-in-Charge.
120
-
-
Material and labour for preparing newly plastered surface of ceiling by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge
58
-
-
M&L for preparation of new plastered surface of walls and applying two coats of cement base paint complete all as specified & directed
242
-
-
M&L for complete removal of existing treatment with help of mechanically and applying two coats of acrylic distemper including a coat of primer and over 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
104
-
-
M&L for complete removal of existing treatment and applying two coats of cement base paint on wall surfaces including preparation of surface complete all as specified and directed by Engineer-in-charge.
220
-
-
Material and labour for preparing newly plastered or pointed surface of wall by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge
30
-
-
M&L for two coats of white wash on old plastered surfaces on ceiling incl preparation etc. complete all as specified and directed.
70
-
-
M&L for Reinforced Cement Concrete M-25 (Design mix) (using 20 mm graded crushed stone aggregates) as in beams, cantilever, lintels over 1.5 m,lintel bands etc complete all as specified and directed.
3
-
-
S&F for TMT bars (Fe-500D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
630
-
-
S&F for TMT bars (Fe-500D) 5 mm dia over upto including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
101
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge.
3
-
-
M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and conforming to Fe 290 (Gde- E- 165) quality- A complete all as specified and directed
1500
-
-
S&F for powder coated aluminium frame for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge.
336
-
-
S&F for powder coated anodised aluminium door shutters/ window and ventilator or shutter, aluminium sections weighing exc 0.55 Kg/m (1.50 to 1.80 mm thick) including necessary necessary joining cleats, glazing clips, rubber neoprene packing, handles 1 Nos in each door, hinges (03 Nos), anodised aluminium snap beading, screws, complete all as specified
9
-
-
S & F in repair 12 mm thick toughened glass with etching ( engraving pictures,names of figures of any type or any size) for glazed door fixed inculding aluminium frame wth necessary washer and locking arrangement, floor door hydroulic spring, stay peg, hinges, fixed filps, rubber gasket etc includign stainless steel locking arrangement, 250 mm stailess steel decorative door handle both side with all accessories complete all as speccified & directed by Engineer-in-Charge
38
-
-
S & F 10 mm toughened polish glass for urinal partition complete all as specified & directed by Engr-in- Charge
1
-
-
M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, with preparation of new or previously untreated surfaces priming with one coat of read oxide & finish with two coats of synthetic enamel paint ordinary tint all as spefified and directed by Engr-in-Charge.
100
-
-
S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
2
-
-
S&F mild steel mortice lock 4 lever vertical type, size 100mm brass complete all as specified.
2
-
-
S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and telescopic pipe flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern and connection to pipes all as directed.
4
-
-
S&F vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia and including plastic seat with cover white in colour, bottom recessed with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed
4
-
-
S & F vitreous china wash hand basin coloured counter top (bow type/oval shape) of size 560 x 450 x 140 mm, long screwed shank including 32 mm dia chromium plated waste coupling/ trap long screwed shank and fly nut, flanged end bedded in red led cement and other end fixed and PVC waste pipe including cutting for and pinning in ends of brackets in CM 1:3 all as specified . Make : Kohler Cat No B07V4ML1XY, Parryware Cat No B0C3RMVG1H, Cera Cat No B08KDVL7TC
19
-
-
Supply and fix plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, jet spray, seat and cover for water closet (European type) complete all as specified.
1
-
-
S & F in repair vitrieous china EWC cascade type white including cistern, seat cover, inlet accessories connection to drain (or outgoing piep) and to flushing pipe, antisyphonage pipe etc., all as complete all as specified & directed by Engineer-in-charge
1
-
-
M&L for PCC 1:2:4 type B2 using 40mm graded aggregates as in benching / haunching of manholes including forming channels including necessary formwork etc complete all as specified and directed by Engr-in-charge.
0.8
-
-
M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set cement mortar 1:6 as in cover slabs (for manholes etc,) chajjas, shelves and similar articles with plain faces complete all as specified and directed by Engr-in-charge.
0.6
-
-
Supply and laying DWCPE (SN8) 180 (OD)/163 (ID) mm diameter drain pipes as per IS-16098 (Part-II), laid in trenches on PCC bed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge.
Note : PCC and earth work shall be measured and paid separately.
20
-
-
M & L for size 1.8 m dia x 3.00 m effective depth of soakage well excavation in any type of soil, foundation in PCC 1:3:6, wall of honey combed mansory, with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick mansonry in CM, RCC cover slab in M-25, SFRC cover inter connection pipe of RCC/DWC complete filled with brick bats all as specified and directed (Ref Drg No BTD-804)
1
-
-
S & F in repairs Vitreous China urinals, half stall type, white with grating & union including spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe complete all as specified and directed.
6
-
-
Supply & fixing pillar tap swan neck type cast copper alloy with capstan head, chromium plated, fancy type screwed down, high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of tap shall be as given in SSR or in relevant IS
19
-
-
S&F bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.
40
-
-
S&F in repair two way bib cock 15mm bore with flange cast copper alloy chromium plated fancy type screwed for iron pipe brass ferrule etc complete all as specified and directed by Engneer -in-Charge
6
-
-
S&F angle valve/stop valve 15 mm bore fancy type, cast copper alloy, chromium plated screwed down high pressure , screwed both ends for iron pipe or for union, complete, all as specified & directed by Engineer-in charge
48
-
-
S&F in repair CP brass stop valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup (Concealed type) fixed complete all as specified and directed by Engineer-in-Charge.
8
-
-
Supply & fixing 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
47
-
-
S & F 8 mm looking mirror of selected quality with bevelled edge mounted on stainless steel stud complete all as specified and directed by Engr-in-charge.
12
-
-
S&F in repair tubular towel rail, Brass chromium plated 20 mm dia, 'D' type, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.
3
-
-
S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms
16
-
-
S&F in repair chromium plated stainless steel fancy type soap dish complete fixed to pluges with CP brass screws all as specified and directed by Engineer-in-Charge
22
-
-
S & F in repair Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)
10
-
-
M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer all as specified.
60
-
-
M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, with preparation of new or previously untreated surfaces priming with one coat of read oxide & finish with two coats of synthetic enamel paint ordinary tint all as spefified and directed by Engr-in-Charge.
8
-
-
M&L for preparation of old steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
25
-
-
S&F in repairs Toilet paper Holder stainless steel with flat recessed type finish glossy fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
2
-
-
S&F in repair chromium plated fancy type health faucet ABS body with 1.25 mtr tube & hook complete all as specified and directed by Engneer -in-Charge
10
-
-
S&F in repair stainless steel chromium plated jet spray (butter fly or ''L'' bend) suitable for EWC including 1m tube and necessary nut bolts complete all as specified and as directed by Engineer-in-charge.
10
-
-
Dismantling of water tanks of capacity exc 500 and n.exc 1000 ltrs and removing from site all as specified and directed.
2
-
-
Dismantling of water tanks of capacity exc 250 and n.exc 500 ltrs and removing from site all as specified and directed.
2
-
-
S&F for Rotational moulded polythene water storage tank 500 ltr capacity vertical with closed top, ISI marked hoisted and fixed in position all as specified in SSR part-I. complete all as specified and directed..
3
-
-
S&F for Rotational moulded polythene water storage tank 1000 ltr capacity vertical with closed top, ISI marked hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed..
2
-
-
S&F in repair Stop valve/angle ball, cast copper alloy,chromium plated, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.
4
-
-
Taking down 15 mm dia steel GI tubing including all connectious fittings in any position including cleaning for re fixing the serviceable pipe all as directed.
80
-
-
Taking down 20 mm dia steel GI tubing including all connectious fittings in any position including cleaning for re fixing the serviceable pipe all as directed.
70
-
-
Taking down 25 mm dia steel GI tubing including all connectious fittings in any position including cleaning for re fixing the serviceable pipe all as directed.
25
-
-
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as specified and directed by Engineer-in-Charge.
65
-
-
S&F 20 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as specified and directed by Engineer-in-Charge.
105
-
-
S&F 25 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as specified and directed by Engineer-in-Charge.
20
-
-
M& L for refixing old steel tubing 15 mm size and connection in new or old position (wall, ceiling, floor etc) including fitting like sockets, tees, elbow, reducer etc complete all as specified and directed by Engineer-in-Charge.
25
-
-
M& L for refixing old steel tubing 20 mm size and connection in new or old position (wall, ceiling, floor etc) including fitting like sockets, tees, elbow, reducer etc complete all as specified and directed by Engineer-in-Charge.
10
-
-
M& L for refixing old steel tubing 25 mm size and connection in new or old position (wall, ceiling, floor etc) including fitting like sockets, tees, elbow, reducer etc complete all as specified and directed by Engineer-in-Charge.
5
-
-
S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm dia pipe complete all as specified and directed.
Note: Minimum weight 20 mm - 210 gms
12
-
-
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overalll as fixed along the cente line over fittings and accessories) complete all as specified and directed by Engineer-in-Charge
710
-
-
S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints, laid in trenches or in floors all as directed.
716
-
-
S&F 75 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints, laid in trenches or in floors all as directed.
5
-
-
S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge
130
-
-
S & F 75 mm bore PVC (SWR) bends with access door any radius complete all as specified and directed by Engineer-in-Charge
3
-
-
S & F in repair mild steel/low carbon steel bands, straps, supports or stays for rainwater, pipes, including anchoring bolts, if required, hooks (Stay) similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
100
-
-
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed in repair all as specified.
14
-
-
Taking down cement plaster from brick wall or concrete surfaces or ceiling including raking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
278
-
-
S&F in repairs grating doom CP 100 mm dia of SS with waste hole complete all as specified and directed
28
-
-
S & F repairs grating doom 125 mm dia with waste hole or with out waste hole of stainless steel complete all as specified and directed. Note : Minimum weight 40gms
24
-
-
M&L in repair PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement all as specified and directed.
5
-
-
M & L in repairs 75 mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified and directed by Engineer-in-Charge.
26
-
-
S & F in repair 110 bore of spun cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and fixed to wall complete all as specified and directed by Engineer-in-Charge.
12
-
-
S & F in repair 75mm bore of spun cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and fixed to wall complete all as specified and directed by Engineer-in-Charge.
23
-
-
S & F in repair 110 bore of spun cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and flaid in trench/floor complete all as specified and directed by Engineer-in-Charge.
17
-
-
S & F in repair 75mm bore of spun cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast iron complete all as specified and directed by Engineer-in-Charge.
32
-
-
S&F in repair vent cowl 110 mm PVC (SWR) complete all as specified and directed by Engr-in-charge.
1
-
-
S&F in repair vent cowl 75 mm cast iron complete all as specified and directed by Engr-in-charge.
2
-
-
S & F in repair cast iron 100 mm bore branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge.
8
-
-
S & F in repair cast iron 100 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.
12
-
-
S & F in repair cast iron 75 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.
8
-
-
S&F in repair, shower rose, 125 mm size, brass chromium plated with sweivel joint complete all as specified and directed by Engineer-in-Charge.
8
-
-
S & F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.
10
-
-
M&L for water proofing treatment to RCC sunken slab as specified below and directed (a) Cleaning the surface with wire brush/coir brush, removing all loose materials like dust particles, dirt etc (b) Applying 15 mm thick plaster in CM 1:3 with WPC on vertical surfaces(c) Creating fillet coving of 50X50mm size with polymer modified mortar on the junction of slab and vertical surfaces (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces (e) Provn of glass fiber mesh of 2X2mm immediately on above coating (f) Apply second coat of two component modified polymer coating as per requirement (g) Cement concrete 1:5:10 over the coating as per requirement (h) Joining the sanitary pipes with the water proofing tape having ability of more than 1.5mm (i) Filling the gap between wall opening and sanitary pipe with non shrink cementanious grout complete all as specified
Note : (i) The treatment shall be carried out as per the manufacturers instructions and as directed by Engr-in-charge. The name of firm shall be got approved from GE before carrying out the work.
(ii) The plan area of floor and vertical surfaces shall be considered for payment (iii) PCC filling in sunken area will be measured and paid seperately
24
-
-
Supply only liquid water proofing compound complete all as specified and directed by Engr-in-charge.
10
-
-
S&F steel ventilator with top hung shutter incl hinges, handle, steel peg stay complete all as specified and directed by Engineer-in-Charge
2
-
-
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer and two coats of synthetic enamel paint including preparation of surface complete all as specified.
5
-
-
Supply & fixing, 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in- charge.
9.5
-
-
S & F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified & directed by Engineer-in- charge.
1
-
-
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engr-in-Charge.
8
-
-
S&7 F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door any radius all as directed
1
-
-
S&F in repair PVC (SWR) floor trap 75mm dia with grating including jointing with solvent cement complete all as specified and directed.
3
-
-
E/M Portion
Taking down carefully existing copper/aluminium point wiring for light, socket or power bell complete with fittings such as switches, sockets, ceiling roses, holders, call bells & manking good the disturbed surfaces of wall, matching the colour with existing surface complete all as specified and directed Note : Rate for making good shall be deemed to be included in above item rate
109
-
-
Taking down MCB with sheet metal enclosure, main switch, DB, etc and making good disturbed surfaces to match with existing surfaces.
24
-
-
Taking down carefully submain wiring/ service connection of any type complete with casing caping / conduit etc complete all as specified and directed.
130
-
-
M&L for concealed Point wiring for One light, one way switch controlled by one, oneway switch with single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FLRSH) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FLRSH) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washer complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.
91
-
-
All as per srl item No 162 above, but for ceilling/exhaust fan paint controlled by one switch and regulator complete all as specified and as directed.
6
-
-
All as per srl item No 162 above, but for 3 pin 5 Amp socket outlet on the same board with other switch, sockets complete all as specified and as directed.
8
-
-
All as per srl item No 162 above, but for one 3 pin 5 Amp socket outlet on independent board complete all as specified & directed
5
-
-
All as per srl item No 162 above, but wiring with 4 Sqmm multistranded cable and earth wire with copper conductor of size 4 Sq mm for 15 amps power point all as specified
4
-
-
Supply and fix Modular bell push 6 Amp, 1 Module complete all as specified and as directed.
4
-
-
Material and labour for concealed Point wiring for one socket out let 15/16 Amps point controlled by one switch (on independant board) (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches / socket, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switch, socket complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ)
2
-
-
Supply and fixed modular switch 6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.
129
-
-
Supply and fixed modular switch 6/16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixed modular Socket outlet multipurpose type 2in 1, 3 Pin 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.
13
-
-
Supply and fixed modular Socket outlet multipurpose type 2 in 1, 3 pin, 6/16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing lamp holder polycarbonate cased body (B22 base), top line series, with back plate complete all as specified and as directed.
10
-
-
Supply and fixing LED lamp minimum 3 star rated 9W LED B-22 base complete all as specified and directed by Engr-in-Charge with following specifications
(a) Lumen system efficacy of lamp should be minimum 100 Lumen per watt.
(b) Input Voltage range : 140 to 270 volts
(c) Temp operating range : Minus 10°C to Plus 45°C
(d) Power factor : Minimum 0.95
(e) CRI : More than 70
12
-
-
Supply and fixing LED tube light fitting polycarbonate housing 1 x 20 Watt, appx 4 feet long, with decorative box linear, housing environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) LED Driver of the same make as of the luminaire. (h) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6000K (l) CRI : Minimum 80 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)
33
-
-
Supply and fixing in repair LED Bulkhead fitting 1 x 10 Watt, complete with Standard LED lighting fixture with extruded polycarbonate housing environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting with all accessories and following specifications complete all as specified and directed by Engineer-in-Charge :-
(a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 5°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : 15%. (f) IP rating : IP-65. (g) CCT : Minimum 5400K (h) Polycarbonate housing white coloured (j) LED Driver of the same make as of the luminaire. (k) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection minimum 2.5 kV. (m) CRI : Minimum 80 (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)
4
-
-
Supply and fix LED 2 ft x 2 ft 1 x 40 watt LED luminaire recess mounting flat panels with fittings recess mounting complete all as specified and directed by Engineer-in-Charge
8
-
-
Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed by Engr-in-Charge.
70
-
-
S & F mirror light fitting, 01 x 10 watt durable & weather proof industrial lighting solution luminaire with IP-65 protection acomplete all as specified and directed
2
-
-
Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door complete all as specified and directed
2
-
-
Supply and fixing (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.
Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ.
2
-
-
Supply and fixing MCB ‘C’ curve suitable for 230 volts AC supply, 6 to 32 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge
3
-
-
Supply and fixing MCB ‘C’ curve suitable for 230 volts AC supply, 06 to 32 Amps, SP with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge
15
-
-
Supply and fixing blanking plate suitable for any type of DB complete all as specified and as directed by Engineer-in-charge.
4
-
-
Supply and fixing energy efficient LED security light fitting of 35W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street luminaire, with driver, including electric connection with using 2 core flexible copper conductor cable 1Sqmm from ceiling rose to light fitting, fixing the light fitting with new bracket made out of GI tubing light grade 32mm dia, 1.5 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Minimum 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)
4
-
-
Supply and fix V TPN DB 4 way double door including 125 Amps, 16 KA MCCB 4 pole complete with 200 Amps rated busbar flush mounting, double door, proction class IP-30, IK08 complete all as specified and directed
1
-
-
Supply and fix MCB SPN 'C' Curve 240 Volt 63 Amps 10 KA complete all as specified and directed
1
-
-
Supply and fix TP & N 63 Amps complete all as specified and directed
2
-
-
Material and labour for concealed sub main wiring (using colour coding such as red, black, white, green colour or as directed) with 6 Sqmm single core (03 run i.e 2 runs for main phase and neutral, 01 run for continues as earth wire) FRLSH PVC insulated unsheathed multistrand copper conductor cable drawn through and including PVC conduit 25mm dia (medium quality ISI marked), for independent circuit including all fitting arrangement i.e. PVC clamp, rawl plug, screw, PVC junction box, tee, bend etc. and including cutting of chases in wall and making good disturbed surfaces of walls as per original complete all as specified and as directed.
Note :- Three runs of copper conductor cable and one run of PVC conduit including accessories shall be measured and paid as one unit (one RM length) for payment and extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.
230
-
-
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber. (ii) GI wire upto DBs earth connection is included in this item. (iii) Water pipe shall be provided in slanting position
4
-
-
Supply and fixing single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge.
10
-
-
Supply and laying and testing cable LT XLPE insulated, screened, PVC bedded, glavanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volt grade with stranded aluminium condutor size 16 Sqmm 4Core including making necessary electrical connections by using AI thimbles of appiropriated size complete all as specified and directed Note : Excavation, earthwork will be measured and paid separately under respective item respective item of BOQ..
50
-
-
Supply and fixing LED light fitting 1 x 10 Watt, appx 2 feet long with decorative ultra ceiling square profile linear LED lighting fixture with extruded polycarbonate environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) CRCA pre coated housing with plastic end cap. (h) LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection minimum 2.5 kV. (l) CCT : Minimum 6000K (m) CRI : Minimum 80 (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)
8
-
-
Supply and fixing in repair LED light fitting as building security lights of 45 Watt Cap 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover, incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-In-Charge
4
-
-
Supply and hanging /fixing ceiling fan 1200 mm sweep AC Supply (Input Voltage Range ; 120 to 280V), BLDC type, 5 star rated, BEE and ISI Marked super enamelled, copper winding of 'B' class insulation, single phase, maximum 30W (± 10%), Temperature rise 40 degree maximum without remote with and including capacitive regulator, 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable size from ceiling rose to fan complete all as specified.
Note :- (i) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on fan with red colour permanent marker and fixing of regulator on switch board, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account
20
-
-
Supply and laying and commissioning LT XLPE cable 1100 Volt grade 50 Sqmm 3.5 Core with stranded aluminium conductor PVC sheathed armoured confirming to IS 7098 (Part-I) laid in trenches/along poles/ through pipe/through duct complete including taking out of existing cablel all as specified and directred.
Excavation and earthwork shall be paid and measured separately
50
-
-
Supply and laying and commissioning LT XLPE cable of size 6 Sqmm, 1100 Volt grade 4 Core with stranded aluminium conductor PVC sheathed armoured confirming to IS 7098 (Part-I) laid in trenches/along poles/ through pipe/through duct complete including taking out of existing cablel all as specified and directred.
Excavation and earthwork shall be paid and measured separately
60
-
-
Supply and laying and testing cable LT XLPE insulated, screened, PVC bedded, glavanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volt grade with stranded aluminium condutor size 70 Sqmm 3.5 Core including making necessary electrical connections by using AI thimbles of appiropriated size complete all as specified and directed Note : Excavation, earthwork will be measured and paid separately under respective item respective item of BOQ..
100
-
-
Supply and laying well brunt clay brick old size class 'B' laid dry flat for protection over the cable, width equal to length of cable complete all as specified and directed.
2.08
-
-
Suply and fixing medium grade glavnized pipe 25 mm dia with all fitting laid in trenches complete all as specified and directed by Engr-in-Charge.
152
-
-
Supply and fix stop valve , screwed 25mm (1") dia pipe complete all as specified and directed by Engr-in-Charge.
2
-
-
Cutting exisiting DI pipe 150 mm dia, opening the dead plate and fixing of new GI pipe complete all as specified and directed by Engr-in-Charge.
2
-
-
Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50Hz, 900RPM, size 300mm sweep with blades and frame including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc mounted in suitable opening arrangement in wall and electric connection with and including three core PVC Insulated PVC Sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge.
Note :- (i) Serial Number as issued by Engr-In-Charge of fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account
18
-
-
Supply and fixing ventilating Air fresher Fan of size 250 mm sweep, AC single phase 230V 50Hz, 1200RPM, copper winding, made of sturdy Engineering plastic complete with louvers shutter, including provision of cutting of wall for suitable opening as per fan and making good the disturbed surface as per existing, including electric connection with PVC Sheathed copper conductor flexible cable of suitable size drawn in flexible PVC conduit from ceiling rose to fan complete all as specified and as directed by Engineer-in-charge.
Note:- (i) Serial Number as issued by Engr-In-Charge of fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
2
-
-
Supply, installing, commissioning and testing of electric water heater (Geyser, vertical type) storage type ABS body with 3 level safety, capacity 25 litre, BEE approved 5 Star rating, 230 V , single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet with feroglas coated (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) complete with all accessories such as safety valve, thermostate, NRV, connection piece PVC connection for hot and cold water of suitable length, three core PVC insulated PVC Sheathed copper conductor flexible cable, including 04 no Nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed by Engr-in-Charge.
8
-
-
M&L sand cushioning with dry and clean locally available sand for under ground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified.
(Note : Punned thickness shall be considered for payment purpose)
18.96
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%