Military Engineer Services Tender

S&F in replacement MCB, four Pole 63 Amps, having breaking capacity 10 KA, 'C' Curve complete all as specified and directed by Engineer-in-Charge. Make :- Legrand Cat Part No 408702 or equivalent in L & T / Crompton / Havells

S&F in replacement MCB 6 to 32 Amps, Single Pole & Neutral 240 Volts, 10 KA, ‘C’ Curve, complete all as specified and directed by Engineer-in-charge. Make :- Legrand Cat Part No 408609 to 408617 or equivalent in/ L&T / Crompton / Havells

Supply only electronic ballast 1x24 watt, 240 Volts suitable for fluoroscent light fittings complete all as specified and directed by Engineer-in-charge. Make :- Havells / Crompton / Philips

Supply only electronic driver 220/240 volts suitable for existing LED Street light fitting 45 watts complete all as specified and directed by Engineer-in-Charge. Make :- Crompton / Philips / Havells / Syska

Supply only electronic driver 220/240 volts suitable for existing LED Street light fitting 60 watts complete all as specified and directed by Engineer-in-Charge. Make :- Crompton / Philips / Havells / Syska

Supply only electronic driver 220/240 volts suitable for existing LED Street light fitting 72 watts complete all as specified and directed by Engineer-in-Charge. Make :- Crompton / Philips / Havells / Syska

Supply only electronic driver 220/240 volts suitable for existing LED Street light fitting 90 watts complete all as specified and directed by Engineer-in-Charge. Make :- Crompton / Philips / Havells / Syska

Supply only 10 KV surge protector suitable for LED fittings 45 / 60 / 72 / 90 watts complete all as specified and directed by Engineer-in-Charge. Make :- HPL Cat part No HPLLRFHPLSPD-10 KV or equivalent in Crompton / Syska / Havells / Polycab

S&F in replacement weather proof PVC insulated, sheathed three core stranded aluminium conductor cable of size 1.50 Sqmm, 1100 Volts grade conforming to IS:9968 (Part-I) 1988 or IS:694-1990 complete all as specified and directed by Engineer-in-Charge.

Disconecting and taking down existing unservicable street light fittings of any type and make along with accessories as directed by Engineer-in-charge. Notes:- (i) Any T & P and Ladder wheel required for the work shall be arranged by the Contractor. The rate of this aspect is included in this item and nothing extra shall be paid on this account. (ii) Serviceable Light fittings retrieved from taking down shall be shifted & installed in units under GE (A) Suratgarh. The rate of this aspect is included in the unit rate of this item and nothing extra shall be paid on this account. (iii) Old unserviceable street light shall Govt property and shall be deposited in store Yard of AGE E/M by the contractor without any extra cost to department.

Supply, fixing and testing LED Street / Security light fitting of 60 Watt, 5700K (including LED drive and internally prewired) complete with body robust, corrosion resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminum alloy. The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -65 / 66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 300 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distortion THD(I) less than 15% ,cool white colour and lamp starting time should  not be more than 10 second including 10 KV surge protection in built or external. Driver should be constant current constant voltage driver. Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection, no load , open circuit and short circuit protection .LED light fitting should be suitable for ambient temperature from -10 degree Centigrade to 50 degree Centigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 65 degree protection. Cover should not degrade due to heating and ageing. The efficiency of LED luminaries system shall be more than 100 lumens per watt and must be certified by the LM-79 test report and including connection for street light from pole box with 1.5 Sqmm, 3 core PVC insulated stranded copper conductor FRLSH cable, 1100 Volts grade ISI marked including addition / alteration in bracket (if required) for fixing light fitting complete all as specified and directed by Engineer-in- charge. Make :- Havells Cat part No. ENDURAPEARLPLUSSL60WLED757PASYTOPC or equivalent in Syska / Polycab / Crompton

All as per Srl item No 14 above but LED street / security light of 45 watt. Make :- Havells Cat part No. ENDURACITYLINERNEXGENSL45WLED757SASYBOPC or equivalent in Syska / Polycab / Crompton

All as per Srl item No 14 above but LED street / security light of 20 watt. Make :- Havells Cat part No. ENDURAPEARLSL20WLED757SASYTOPC or equivalent in Syska / Polycab / Crompton Note for srl item No 14 & 16:- (a) Tenderer shall submit test report of LED street light fitting from Government accredited test laboratory for LM - 79 and LM - 80 . (b) Contractor has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of CA. Contractor shall obtain warranty from the manufacturer of product on their letter head and submit the same to deparment alonwith his letter head. The product will be replaced free of cost in the following case :- (i) Manfacturing defects (ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries. (c) All LED light/luminare must meet the provision laid down in IS - 16101 , 16102 Part -I/II ,16103 Part -I , 16104 ,16105 ,16106 , 16108/2012 and 15885 Part -II / Section 13. (d) Scope of work shall include supply and fixing street light fittings on street light bracket fixed on poles, If street light fitting requires to fixed on existing street light bracket and any addition alterration required in bracket for fixing street light, In that case cost of additional / alteration is included in the unit rate of this item, which also includes needful T & P and required accessories such as 1.5 sqmm, 3 core PVC insulated stranded copper conductor cable for connection from pole box to light fitting etc complete including making connection, testing etc complete .No extra payment is admissible on this account. (e) Light fittings shall be provided with 10 KV surge protection as mentioned in description of item. If 10 KV surge protection is not provided in light fitting for which cat part is mentioned in BOQ. Contractor has to provide light fitting with 10 KV surge protection without any extra cost to department.

S&F in replacement Single phase automatic automatic street light switch suitable for 3 KW load complete with two numbers Infrared sensor based NATURE SWITCH for automatic switching of street / security lights with one number two pole power contractors 40 Amps (Type - MU40-2P, Cs90119) with coil voltage 220 / 240 V and incoming MCBs single pole - 01 No, outgoing MCBs single pole - 01 No of rating 32 Amps & circuit wiring with single core multi stranded of size 10 Sqmm. Lighting switch operation should be based on natural light lux level. Required illuminance level for switching ON is 30 Lux and for switching OFF 10 Lux. The sensor (one service & one stand by) should also have part night operation facility for 4,5,6,........11 & 12 hours. The sensor along with suitable power contactor (S), Incoming -outgoing MCB's should be enclosed in a pole / wall mountable enclosure made of Rust proof, Electric shock proof, termite proof and FR grade confirming to IP66 complete all as specified and directed by Engineer in charge. Make :- Swadeep 02EC3KW1P

S&F in replacement cable junction box of size not less then 225x295x122mm, made of high quality thermo plastic polystyrene, weather proof, dust, jet water proof, chemical, acid corrosion, impact, insulated & shock proof IP 66 / 67 for outdoor Installation with internallly embedded gasket (PUR) including the box fitted with connector 8 way 40 Amps 01 No incoming / outcoming cable at controlled with MCB SP 6 Amps 01 No & enclosed along pole with MS flat iron clamp of suitable size and including 40mm GI pipe light grade 60cm length for cable protection fixed along pole complete all as specified and directed by Engineer-in-Charge. Make :- Hensel Cat Part No KF 3500 G or equivalent in Legrand / Indokop Note :- (i) Cost of flat iron clamp is deemed to included in unit rate of this items. Nothing extra shall be paid on this account. (ii) Size of junction box for different mafufacturer may slightly varried from size mentioned in description of item. Contractor has to provide junction box as per cat No mentioned against make of junction box. where cat No is not mentioned against any make, in that case junction box of size mentioned in description has to provide, if exact size of junction box is not available, then next higher size junction box has to be provided. Nothing extra shall be paid on this account.

S&F in replacement street light bracket made out of 40mm dia GI pipe light grade 1.2m long , bent to shape at 120 degree angle from vertical fixed along pole with and including clamp made out of Flat iron 40mm x 6mm with nuts, bolts ,washers etc. duly painted with two coats of aluminium paint complete all as specified and as directed by Engineer-in-charge.

Cutting/ trimming of tree branches not exc 10cm girth touching/approaching the LT / HT overhead lines upto 3 metre width on each side with hacksaw/axe to clear the LT / HT line including disposal of trimmed branches 100 Metre away inside the cantonment area & clearing site complete all as specified and directed by Engineer-in-Charge. (Approximate length of span 40 to 50 metre) Note:-The contractor shall be responsible to maintain this item of work till the date of completion work. Nothing shall extra be paid on this account.

M&L for painting on steel tubular poles 9 metre long including attachments (cross arms, clamps GI pipes etc) complete with one coat of aluminium paint after preparation of steel surfaces with black & yellow strips 30cm each upto 1.5 metre height from top of PCC foundation block or PCC coping including numbering of poles with synthetic enamel paint (black) in 80mm high letters over 150mmx230mm yellow base complete all as specified and directed by Engineer-in-charge.

Supplying, laying, jointing, commissioning and testing in replacement XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade of cross sectional area 16 sq mm 4 core confirming to IS-7098 (Part-I-1988) laid in trenches, along poles through pipes etc complete all as specified and directed by Engineer-in-charge. Notes :- (i) Excavation, earth work, sand cushioning, cable protection and GI pipe shall be measured & paid for separately under respective items of BOQ (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall deemed to be inclusive of the above provisions.

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth, or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable and water supply / sewage pipe line etc. in soft / loose soil & getting out including taking out old brick or precast cable cover complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level n. exc 1.50 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for dry sand (Tibba sand) and punning for cushioning to underground cable complete all as specified and directed by Engineer-in-charge. Note: - For payment purpose thickness after punning shall be measured.

M & L for brick protection with old size sub class 'B' bricks laid flat, abutting each other with gap between adjacent bricks not exc. 10mm, length of bricks across the route of underground cable complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Galvanized iron tubing, 40mm bore light grade, ISI marked, including all fittings and laid in trenches / under road / drains, fixed to poles / walls with required numbers of clamps made out of 25x3mm flat iron, bolts, nuts and washers for protection of LT electric cable complete all as specified and as directed by Engineer-in-charge. Notes :- (i) Excavation & earthwork shall be measured & paid for separately under respective items of BOQ

S&F in replacement LED solar street light fittings water proof die cast aluminium body of capacity 9 watts (cool white) operating / suitable for 12 volts, 40 AH DC supply, IP 65 complete all as specified and directed by Engineer-in-Charge. Make :- HPL Cat Part No SOLSL09W12VICCWD or equivalent in Crompton / Havells / Syska

S&F in replacement power contactor two pole of capacity 40 Amps, coil voltage 220/ 240 volts, type MU-2P, wide band coil complete all as specified and directed by Engineer-in-Charge. Make:- L&T cat part No CS90119 or equivalent in Havells / GE / Legrand / Schneider ------------------------------------------------------------------------------------------------------------------------------------ Note :- A sum of Rs. 46880/- will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 21 (Schedule of Credit) of Tender documents.