Military Engineer Services Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 94,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_694196_1Tender No
GE/JODH (A) NO 1- OF 2024-25 (9233/E8)Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any description, ( colour, design & pattern, & size/ shape, as approved by GE) as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
225
-
-
... More
Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.
7
-
-
... More
Demolition of brick / block or stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed.
14
-
-
... More
M&L for cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6 complete all as specified and directed.
2.5
-
-
... More
M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complate all as specified and directed.
121
-
-
... More
All as per item No 8.00 here-in-above but except stone
3
-
-
... More
M&L precast cement concrete block masonry using PCC 1:2:4, type B-1 solid blocks, 10 cm in width and setting in cement mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.
20
-
-
... More
Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete to squared rubble walling, regular coursed, Jodhpur typeall as specified and directed.
547
-
-
... More
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
280
-
-
... More
M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), as in base course, to receive floor finishes, complete all as specified & directed.
190
-
-
... More
M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
100
-
-
... More
All as per item No. 14.00 here-in-above, but area of tile exc 0.11Sqm but not exc. 0.18 Sqm
120
-
-
... More
M&L for glazed colour ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:4), (including Highlighter pattern), complete all as specified and directed.
300
-
-
... More
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
6.5
-
-
... More
Dismantling of wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed.
201
-
-
... More
M&L for machine cut kota stone slab 20 to 25mm thick as in floor, cooking plateform, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:4 including dismantling of stone slabs of any description complete all as specified and as directed.
55
-
-
... More
All as per item No. 19.00 here-in-above, but as in skirting/dado, riser/tread of step in single piece or similar type of work, with 10mm thick backing coat in CM 1:4
5
-
-
... More
M&L for GI frame work for seamless ceiling comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2M length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel at 457mm c/c and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and including M&L for applying 02 mm thick plaster of paris over and including S&F gypsum board 12mm thick in ceiling fixed with screws as per manufacturers instructions over the frame work and preparation of ceiling board and applying two coats of oil bound distemper over & including M&L a coat of wall / ceiling care putty, complete all as specified and as directed.
201
-
-
... More
M&L for 18 to 20 mm thick (telephone black shade) granite stone, as in cooking plateform, oval type WHB counter, sink & etc. machine cut, (table rubbed and polished) best quality as per sample, including & over 20 mm thick screeding in CM1:3 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.
5
-
-
... More
Taking down cement plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified and as directed.
360
-
-
... More
M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified & directed.
10
-
-
... More
M&L Rendering 5 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete
40
-
-
... More
M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified & directed.
250
-
-
... More
M&L for 15 mm thick rendering in CM 1:4 finished even and smooth without extra cement on stone wall surface complete all as specified & directed.
216
-
-
... More
Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified
15
-
-
... More
M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.
99
-
-
... More
M&L for preparation of new plastered or unplastered surfaces of wall and applying with 1.5-2.0 mm thick wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper (shade or tint as approved by GE) over & including one coat of primer on walls complete all as specified and as directed
96
-
-
... More
M&L for complete removal of existing treament of old painted wall surafces and applying with 1.5-2.0 mm thick wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper (shade or tint as approved by GE) over & including one coat of primer on walls complete all as specified and as directed.
240
-
-
... More
M&L for Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash on wall surfaces complete all as specified and as directed.
75
-
-
... More
M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.
50
-
-
... More
M&L for preparation of newly plastered surface of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.
Note -Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures.
ii)- Paint shall be in one or more colours/ shades all as approved by GE.
400
-
-
... More
M&L for preparation of old decorated ceiling surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on ceiling, complete all as specified and directed.
150
-
-
... More
M&L Preparation of new plastered or un-plastered surfaces or old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc of walls and applying two coats of cement base paint over & including M&L single coat of chalk white complete all as specified and as directed.
280
-
-
... More
M & L for preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (First quality) of any tint complete all as specified and as directed .
5
-
-
... More
M&L preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and as directed.
10
-
-
... More
M&L preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L single coat of red- oxide, zinc chrome primer complete all as specified and as directed.
13
-
-
... More
Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.
12
-
-
... More
Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.
12
-
-
... More
Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm, refing in the same opening, each complete all as specified and directed.
2
-
-
... More
S&F rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars barred iron doors; chowkhat, doors with MS sheet, ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge
180
-
-
... More
M & L for mild steel framed work as in brackets etc for cooler stands etc framed steps/stairs etc complete, of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified & directed .
100
-
-
... More
M & L for preparation of old painted steel surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (First quality) of any tint complete all as specified and as directed .
10
-
-
... More
M&L Pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed.
5.2
-
-
... More
M& L for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.
75
-
-
... More
M&L factory Made modular shutters, 40 mm thick solid core with block board core construction as per IS 2202(part-I, 1999), both side decorative type. The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 40mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.
8.4
-
-
... More
M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.
2
-
-
... More
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per spec & drawing, complete all as specified and directed.
19.8
-
-
... More
M&L for fabrication of Pre powder coated (powder coating min 50 micron) Anodised aluminium frame work suitable for aluminium door, windows with or without rebate or for sliding windows(two track/three track ) , ventilators with louvers & decogril, having suitable mechanism for tilting , U shaped fillets for securing Jallies etc & the likes complete all as per sample kept in GE Office & fixed in position complete all as directed Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately.
215
-
-
... More
M&L for Pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators.
70
-
-
... More
M&L for pre powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised
aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as directed & specified.
Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately.
24
-
-
... More
M&L for factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified
3.5
-
-
... More
M&L for factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified
3.5
-
-
... More
S&F of aluminium anodized,tower bolt 150/200 mm long complete all as specified and directed.
35
-
-
... More
S&F aluminum anodised handle extruded section of size 150mm long complete all as specified and directed.
37
-
-
... More
S&F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.
2
-
-
... More
S &F of stainless steel butt hinges 100 mm size complete all as specified and directed.
48
-
-
... More
S &F of mild steel butt hinges 100 mm size complete all as specified and directed.
16
-
-
... More
S&F Pre powder coated aluminium door shutters using section weighing 0.55 kg/RM including necessary joinng cleats, glazing clips, rubber packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as directed & specified.
Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately.
25
-
-
... More
M & L for fabrication of anodized aluminium curtain wall with frame of section 63.5mm x 38.1mm x 1.50 mm thick partly panelled and partly glazed, centre to centre distance not more than 1M each panel with necessary jointing cleats, glazing clips, rubber packing snap beading, angle cleats, screws, including 6mm thick ACP (Aluminium Composite Panel) sheet approved shade best quality on bottom panel and 5 mm thick float tinted glass on top panel complete all as specified and as directed.
6
-
-
... More
S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long complete all as specified and directed.
8
-
-
... More
S&F of 4 mm thick Figured glass, pinheaded panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed.
3
-
-
... More
S&F for sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
38
-
-
... More
S&F in replacement galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm with necessary fitting on steel/ wooden surface complete all as specified and directed.
35
-
-
... More
M&L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast iron fixing,coping, chamfered edges including necessary form work all as specified.
0.2
-
-
... More
S&F in replacement Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3 universal type,suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.
12
-
-
... More
S&F SS decorative fancy type 25mm curtain rod with fixing brackets, knob etc as in replacement complete all as specified and directed.
40
-
-
... More
S & F in replacement stainless steel kitchen sink without drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
2
-
-
... More
S&F in replacement soap dish of CP fixed with screws complete all as specified and directed.
11
-
-
... More
S&F in replacement CP Brass towel rail 600mm long fiexd to wall with chromium plated brass screws and woodn cleats Min weight 170gms approved make complete all as spcified and directed.
11
-
-
... More
S&F in replacement 600x450mm bevelled edge mirror of selected quality glass mounted on PVC frame fixed to wooden plugs with chromium plated brass screws and cup washres, complete all as specified and directed.
3
-
-
... More
S&F in replacement MS chromium plated peg set of five fixing with wall complete all as specified and directed.
6
-
-
... More
S&F in replacement Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges, 15mm dia complete all as specified and as directed.
2
-
-
... More
S&F as in replacement of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, modular pipe of 32mm dia HDPE pipe etc., complete all as specified and directed.
8
-
-
... More
S & F as in replacement vitreous china wash down water closet Anglo Indian Type pedestal pattern with seat & cover complete incl fixing of modular pipe etc complete all as specified and directed.
1
-
-
... More
S&F in replacements Wash Basins,Vitreous China pedestal Ivoery,flat back,size 550 x 400mm including brackets and cutting for and pinning in ends of brackets or erecting stand includuing swan neck Piller tap cast copper alloy chromium plated fancy type, with capstan heads,, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed including fixing and supply of Waste fittings, brass, chromium plated and waste pipe Complete all as spd.
9
-
-
... More
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 100/110mm bore as directed
35
-
-
... More
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed
30
-
-
... More
S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed
5
-
-
... More
S&F 75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed
4
-
-
... More
S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed
5
-
-
... More
S&F in replacement vitreous ware wash down water closet [Pedestal Pattern], white [ETWC] including plastic water closet seat back soft closed pattern with flat bottom and cover & jet and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and modularing pipe etc., complete all as specified and directed.
4
-
-
... More
S&F100 mm CI branch pieces single socketed Y equal or unequal, complete all as specified and directed.
4
-
-
... More
S&F75 mm CI branch pieces single socketed Y equal or unequal, complete all as specified and directed.
4
-
-
... More
S&F100mm CI bends any radius complete all as specified and directed
4
-
-
... More
S&F 75 mm dia CI bend with oval acess door fixed to pipe complete all as specified and directed.
4
-
-
... More
S&F in replacements Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including wate coupling and waste pipe of sitable diameter and length complete all as specified and as directed.
5
-
-
... More
S&F 100 mm dia CI floor trap plain grating including jointing with solvent cement 100mm dia
4
-
-
... More
S&F in replacements Pillar taps, fancy type Cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot" or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.
7
-
-
... More
S&F in replacements over head Shower rose 100/125 mm dia of ABS Body chromium plated brass body (Nickel 10 microns and chrome 0.3 microns) with grey face plate & with arm having swivel joint cromium plated best quality, complete all as specified and directed.
4
-
-
... More
S & F in replacement 15 mm dia angular stop cock with chromium plated brass body fancy type long thread with flange, complete all as specified and directed.
38
-
-
... More
S & F in replacement 15 mm dia two way angular stop cock with chromium plated brass body fancy type long thread with flange, complete all as specified and directed.
2
-
-
... More
S & F in replacement chromium plated brass body fancy type Bidet spray (Health faucet) with 1 meter SS tube and holder, complete all as specified and directed.
9
-
-
... More
S&F PVC connections 15mm size with PTMT nuts of length 450/600mm, complete all as specified and directed.
22
-
-
... More
S&F in replacements chromium plated brass body fancy type 15 mm dia bib, cock long body with flange with chromium plated fixed with iron pipe complete all as specified and directed.
19
-
-
... More
Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed.
20
-
-
... More
S&F in replacement of PVC valve less, syphonic action type, modularing cistern, low level of 10 ltrs capacity, white with inlet, ball valve, float and handle including brackets, modular pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts including cuttings of floor / wall and making good in CM (1:3) and fiishig the surfaces to match with existing complete all as specified and as directed.
13
-
-
... More
S&F in replacement 500 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, including dismantling old u/s existing tank, complete all as specified and as directed.
5
-
-
... More
Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed .
25
-
-
... More
Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in wall/ceiling/floor of suitable size complete all as specified and as directed .
20
-
-
... More
Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in wall/ceiling/floor of suitable size complete all as specified and as directed .
30
-
-
... More
S&F 110 mm bore (SWR) PVC bends any radius with oval access door complete all as specified and directed.
16
-
-
... More
S&F of PVC (SWR) 110mm bore vent cowl complete all as specified and directed.
7
-
-
... More
S&F in replacement PVC SWR bends of any radius of 75 mm bore, complete all as specified and as directed.
16
-
-
... More
S&F of PVC (SWR) 75mm bore vent cowl complete all as specified and directed.
5
-
-
... More
S&F in replacements of CP mild steel grating with or without hole 125 mm dia, complete all as specified and as directed
15
-
-
... More
Demolition and breaking up drain pipe 150mm dia (Salt glazed ware, AC or Reinforced Concrete) set in cement mortar
15
-
-
... More
Supply & laying jointing and testing 150mm bore reinforced cement concrete pipes class NP-2 laid and jointed in cement mortor 1:1 complete, with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed.
283
-
-
... More
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm bore of pipe, complete all as specified and as directed.
5
-
-
... More
S&F in replacement rotational moulded polythene water storage tanks of 1000 ltrs capacity, white, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with including dismantling old tanks complete all as specified and as directed.
2
-
-
... More
S &F in repair 25/20 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25/20mm bore pipe all as specified specified.
20
-
-
... More
M&L PCC (1:2:4)Type B-1 using 20 mm graded stone aggregate for water tank plinth, complete all as specified and directed.
0.5
-
-
... More
Supplying and laying of CPVC pipes, 16 mm outer dia of pipe, SDR 11 & Plain CPVC SDR 11 including all brass fittings, laid in trenches or ceiling or fixed to wall complete all as specified.
60
-
-
... More
Supplying and laying of CPVC pipes, 20 mm outer dia of pipe, SDR 11 & Plain CPVC SDR 11 including all brass fittings, laid in trenches or ceiling or fixed to wall complete all as specified.
15
-
-
... More
M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 5 to 7.5cm, complete all as specified and directed.
30
-
-
... More
Supply only Integral water proofing compound, ISI Marked, complet all as specified.
40
-
-
... More
Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out in any type soil, complete all as specified and directed.
67
-
-
... More
Supplying and laying of CPVC pipes, 25 mm outer dia of pipe, SDR 11 & Plain CPVC SDR 11 including all brass fittings, laid in trenches or ceiling or fixed to wall complete all as specified.
20
-
-
... More
Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.
20
-
-
... More
All as per item No 121.00 here-in-above, but size of pipe 20 mm bore.
55
-
-
... More
All as per item No 121.00 here-in-above, but size of pipe 15 mm bore.
120
-
-
... More
Demolition of cement concrete as removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, padding,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . modularing at junction of parapets complete and removing the same to the places where as directed.
320
-
-
... More
M&L for plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in roof padding over roof for making good depression / undulation to make the existing as filling in depression of roof slab, complete all as specified & directed.
14
-
-
... More
Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed.
30
-
-
... More
M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface,complete all as specified and as directed.
30
-
-
... More
Supply & Fixing 20mm Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors fixed on wall, ceiling or laid to floor,complete all as specified and as directed.
42
-
-
... More
Supply & Fixing 15mm Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.
63
-
-
... More
Demolition of reinforced cement concrete of any description for roof,colums ,beam of any type etc complete all as specified and directed.
1.2
-
-
... More
Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and directed.
55
-
-
... More
From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces complere all as specified and directed.
35
-
-
... More
Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces, complere all as specified and directed.
10
-
-
... More
M & L RCC design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chijja and in shelve etc complete all as specified and directed.
7.2
-
-
... More
M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack.,complete all as specified and as directed.
30
-
-
... More
S & F HYSD steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.
1110
-
-
... More
M&L for 15 -20 mm thick rendering in CM (1:1:2) using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand over the bond coat applied surfaces with cement mixed including GI chicken wire mesh of 1.40 mm dia wire and 12 mm mesh size with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat. ,complete all as specified and as directed.
30
-
-
... More
S & F HYSD steel TMT bar 5 dia and over upto and including 10 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.
400
-
-
... More
M& L for roof treatment in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 2.25Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm
448
-
-
... More
Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc., complere all as specified and directed.
142
-
-
... More
Taking down carefully sub-main wiring (with DB & isolator any type) of any size and making good to ther disturbed surfaces to match the existing all as specified and as directed by EIC.
45
-
-
... More
M&L for modular point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, fan regulators, suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed.
Note- Quoted Rates is deemed to be inclusive of chasing/cutting & making good of disturbed surface match as per existing.
119
-
-
... More
All as per item No 142.00 here-in-above, but suitable for one socket outlet 3 pin 6 Amps on same board
25
-
-
... More
All as per item No 142.00 here-in-above, but suitable for one socket outlet 3 pin 6 Amp on independent board
24
-
-
... More
All as per item No 142.00 here-in-above, but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .
29
-
-
... More
All as per item No 142.00 here-in-above, but with 4 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .
9
-
-
... More
S&F switch modular type single pole one way 6 Amp ISI Marked, complete all as specified & directed.
167
-
-
... More
Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.complete all as specified and directed.
12
-
-
... More
S & F Bell, ding dong type AC, 230 volts, single pole complete all as directed.
1
-
-
... More
S & F Bell push 5/6 Amps, modular type complete all as directed.
1
-
-
... More
S&F switch modular type single pole one way 16 Amp ISI Marked.Make:
7
-
-
... More
S&F socket outlet 2 in 1, 5 pin, 6 Amp modular type ISI Marked, complere all as specified and directed.
49
-
-
... More
S&F socket outlet 2 in 1, 6 pin, 6 and 16 amp modular type ISI Marked, complere all as specified and directed.
36
-
-
... More
M & L for Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body, complere all as specified and directed.
93
-
-
... More
M & L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting including LED lamp 9 W, complere all as specified and directed
19
-
-
... More
Supply and fix socket type electonic fan regulator modular type ISI Marked, complere all as specified and directed
15
-
-
... More
Taking down and refixing / Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan, complere all as specified and directed
10
-
-
... More
S&F sheet metal enclosures, SPN 8 way, 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going, complere all as specified and directed
4
-
-
... More
S&F sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door DB's suitable for provn for a MCB One TPN 63 Amps as incoming and 4 Nos of SPN 40 Amps outgoing complete all as specified and directed by Engr-in-charge. Note : MCB/RCCB shall be measured and paid seperately.
2
-
-
... More
Supply and Fix MCB Single pole"B" series 5-32 Amps ISI marked, complere all as specified and directed
37
-
-
... More
Supply and Fix MCB Single pole & neutral "B" series 63 Amps ISI marked, complere all as specified and directed
6
-
-
... More
Supply and fixing MCB TPN C Curve 63 Amps,, , complere all as specified and directed
1
-
-
... More
Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complere all as specified and directed
30
-
-
... More
S & F in replacement ceiling fan 1400mm sweep, min air delivery 210 CFM with service value 6.00 BEE 5 star rating, brushless direct current motor (BLDC), suitable for single Phase 230 volts and connected with twin core twisted flexible copper conductor cable from ceiling rose to fitting complete all as specified and as directed. .
4
-
-
... More
S&F in replacement LED light fitting 1 X 10 watt (2feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed.
6
-
-
... More
Supply and fixing in replacement LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable, complere all as specified and directed
10
-
-
... More
M&Lfor sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor FRLSH cable passing through in and including PVC conduit of 25 mm dia, concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor FRLSH cable PVC insulated and unsheathed as earth wire, complere all as specified and directed Note :- Two runs of cable 6 Sqmm FRLSH Cable and One run of 6 Sqmm FRLS Cable along with 25 mm dai conduit shall be measured as one unit length.
80
-
-
... More
Taking down and re-fixing only incl connecting Tube light and keep in safe custody, complere all as specified and directed
10
-
-
... More
S&F of Heavy duty, metal body Exhaust fan 300 mm sweep, 900 RPM, including louvers with cutting chases/drilling on brick wall and grounting with nut bolts and making distrubed surface, complere all as specified and directed
4
-
-
... More
M & L in replacement Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to and including earthing test point all as specified or indicated including testing on completion, complere all as specified and directed. Note : Rates are deemed to be included for necessary earth work , earth pit with RCC cover of size 300X300 x25 mm etc complete
7
-
-
... More
Supply, laying testing in replacement, in trenches LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 16 sqmm 4 core all as diredted by Engr - in - charge Note : Earth work and brick work measured and paid separately
350
-
-
... More
M & L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed.
45
-
-
... More
M & L removing excavated materials to a distance not exceeding 50m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed .
16
-
-
... More
Supply and laying Un reinforced Precast concrete cable cover, flat size 300 mm x 180 mm x 40mm all as directed
660
-
-
... More
Supply and spreading clean dry sand in trenches for cushioning to PVC cable and punning to provide required cover to UG cable complete all as specified and directed .
Note :- Punned thickness shall be measured for the purpose of payment.
11
-
-
... More
S&F in replacement of GI tubing , medium grade of 40mm bore with fittings as in road crossings for cable protection complete all as specified and as directed.
12
-
-
... More
S&F and testing factory made sheet metal enclosure for MCB DB SPN 12 way 240 volt with double door, IP - 42 DB's suitable for one MCB SPN as incoming and two MCB SP as out going protection duly fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type, complete all as specified and as directed.
1
-
-
... More
M&L single pole and neutral enclosure with two pin earth industrial plug and socket with one MCB SP 20 Amps, 'C' curve, complete all as specified and as directed.
4
-
-
... More
M&L MCB TPN ‘C’ Curve 10KA, 100 amps, 415 Volts, with over load and short circuit protection, complete all as specified and directed .
1
-
-
... More
M&L submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLSH PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including 25mm dia PVC rigid conduit with wall thickness not less than 1.8 mm, accessories concealed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed.
Note :- Three runs of 4 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.
70
-
-
... More
S&F Vertical Distribution Board, double Door, suitable for 'A' Frame FP MCCB 100A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Note : MCCB & MCB shall be measured and paid for separately.
2
-
-
... More
S&F in replacement MCCB, 'A' Frame, thermal adjustable magnectic setting, Ics = 75%, 25 KA, 415V, 100 Amp, 4 Pole with over load and short circuit protection, (ISI marked), as in replacement, complete all as specified and as directed.
2
-
-
... More
Supply, laying, testing & commissioing of cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core including taking out old unserviceable cable if required., complete all as specified and as directed.
35
-
-
... More
Supply, laying, testing & commissioing of cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core including taking out old unserviceable cable if required., complete all as specified and as directed.
90
-
-
... More
Taking down old serviceable window type AC complete including voltage stabilizer any size and capacity and take in safe custody and refix in same position complete all as directed by EIC.
1
-
-
... More
M&L for 10 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement ,complete all as specified and as directed.
30
-
-
... More
M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as directed at site ,complete all as specified and as directed.
30
-
-
... More
M&L for double charged / dark shade vitrified ceramic tiles, 10 mm thick (square/ rectagular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, (size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
100
-
-
... More
M&L for double charged / dark shade vitrified ceramic tiles, 10 mm thick (square/ rectagular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, (size & shape, shade and pattern as approved by GE), as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 10mm thick rendering in CM 1:4 complete all as specified and directed.
5
-
-
... More
M&L for applying Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
150
-
-
... More
M&L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh any sunk or raised moulding (Fillets, metal frame work and G.I. wire mesh paid separately)
51
-
-
... More
M&L decorative type plaster of paris work of size100 mm x 100 mm, as in cornice or junction of wall and ceiling complete all as specified and directed.
20
-
-
... More
S&F for lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing PVC Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet thickness of insulated insulated PVC wall PVC wall lining 25 mm complete all as specified.
50
-
-
... More
M & L for fabrication of anodized aluminium curtain wall with frame of section 63.5mm x 38.1mm x 1.50 mm thick partly panelled and partly glazed, centre to centre distance not more than 1M each panel with necessary jointing cleats, glazing clips, rubber packing snap beading, angle cleats, screws, including 6mm thick ACP (Aluminium Composite Panel) sheet approved shade best quality on bottom panel and 5 mm thick float tinted glass on top panel complete all as specified and as directed.
6
-
-
... More
M&L for stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc ccomplete.
4
-
-
... More
S&F in replacements of 12 mm thick toughened glass as in door/window or partition complete including design etching work/sun control film as directed and all necessary stainless steel fittings, locking arrangement and arrangement like hinges, clips, handle etc, complete all as specified & directed by Engineer-in-charge.
10
-
-
... More
S&F stainless steel body bottom floor spring machine screwed suitable for glass door complete all as specified and as directed
2
-
-
... More
S&F 5 - 6 mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and as directed
4
-
-
... More
S&F in replacements Corner Glass shelf 300mm (as per sample) superior quality with CP tubular framing & brackets complete all as specified and directed.
2
-
-
... More
Cutting openings, through brick walls built in CM or cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing & removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m
1.5
-
-
... More
M&L for 75mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and directed.
2
-
-
... More
S&F in replacements PVC Flexible waste pipe 32 mm to 40 mm dia with socket for steel sink/WHB upto floor level and any length but not less than 0.85 Mtr, complete all as specified and as directed.
2
-
-
... More
S & F 110 mm bore PVC [SWR] branch piece, single [single "Y"] equal or unequal complete all as specified and as directed.
2
-
-
... More
S & F 75 mm bore PVC [SWR] branch piece, single [single "Y"] equal or unequal complete all as specified and as directed.
2
-
-
... More
Removing excavated material at a level exc. 250 m but n exc. 500 m and depositing where directed starting point complete all as specified.
22
-
-
... More
M&L for cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested, suitable for 150 mm bore pipe, complete all as specified and directed.
268
-
-
... More
Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in any type of soil complete all as specified and directed.
63
-
-
... More
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard rock all as specified and directed.
95
-
-
... More
M&L for dry clean fine river sand as in sand filling to under floor including spreading levelling of sand layer not more than 25 mm thicknesss each layer, complete all as specified and as directed.
40
-
-
... More
M&L for hard core broken stone of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface, complete all as specified and as directed.
8
-
-
... More
M&L 40 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring/hard standing laid in alternative bays using glass dividing strips including finishing cement concrete surface even and smooth without using extra cement complete all as specified & as directed.
14
-
-
... More
M&L for applying two coats of exterior emulsion paint on wall surfaces as per manufacturer’s instruction over and including M&L alkali resistant primer, complete all as specified and directed.
84
-
-
... More
S&F 20 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engineer-in-charge.
2
-
-
... More
S&F 25 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engineer-in-charge.
2
-
-
... More
S&F in replacements two way angle bib cock chromium plated brass body, (Nickel 10 microns and chrome 0.3 microns) fancy type 15 mm bore /size, complete all as specified and directed.
4
-
-
... More
S & F in replacement toilet paper holder chromimum plated fancy type complete all as specified and as directed.
4
-
-
... More
M&L writing or repainting of existing letters or figures ( Block, Roman, Italian or Indian) n. exc. 30 cm high complete all as specified and directed.
2
-
-
... More
S&F in replacement CI connector of length 30 cms including cutting of holes with lead joints suitable for 100 mm bore pipe, complete all as specified and directed.
4
-
-
... More
S&F in replacement CI branch pieces double socketed Y equal or unequal suitable for 100 mm bore pipe, complete all as specified and directed.
4
-
-
... More
S&F in replacement CI branch pieces double socketed Y equal or unequal suitable for 75 mm bore pipe, complete all as specified and directed.
4
-
-
... More
S&F in replacement Cast iron nahani trap with CP grating out let diameter 100mm including jointing to waste pipe fixed in cement mortar 1:1, complete all as specified and directed.
4
-
-
... More
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed.
60
-
-
... More
Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.
6
-
-
... More
Taking down steel / Aluminium windows/ vents & remove from site, complete all as specified and directed.
26
-
-
... More
NOTE:- (i)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 58 to 62 of tender document. (ii)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%