Military Engineer Services Tender

M&L for repair to pot holes not exceeding 30mm depth not exceeding 1.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, etc., cutting around edges to at least 30mm in depth, making good by applying tack coat using paving bitumen VG-10 grade @ 5 kg per 10 Sqm, putting in premix bituminous macadam with binder 9.8kg per 10Sqm bonded with 0.09cum of stone chipping of 6.3mm, filled up to the top level of existing road, well rammed (including supply of bitumen, premix and chippings) and compacted with power roller complete all as specified and directed.

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with paving bitumen VG-10 grade at the rate of 5.0Kg per 10Sqm and laying bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.50% binder content by weight of total mix using paving bitumen VG-40 grade, mixed in computerized hot mix plant, laying with mechanical paver, rolled and compacted to required camber or gradient using 8 to 12 ton power roller complete all as directed and specified.

M&L for preparing bituminous road surfaces and marking/painting lines, dashes, arrows, letters etc. on roads, pavements and the like not exceeding 10cm wide, 2.5mm thick with retro reflective Thermoplastic road marking Paint of approved colour, all as per BS-3262-1989 specifications, with 8% glass beads laid in 160 degree centigrade by special applicator machine complete all as per manufacturer's instructions including removing old paint complete all as specified and as directed.

S&F Solar cat eye aluminum alloy shell (100% water proofing design according to IP65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono-crystalline solar panel 2.4V/ 0.3 watt one Ni-ed rechargeable battery (1.2V/ 1600MA) and consisting of super bright LED with 10,000 to 18,000 mcd fixed with and including MS stud of suitable size as per manufactures instructions etc. including taking out old unserviceable one complete all as specified and directed

S&F Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions including taking out old unserviceable one complete all as specified and directed.

S&Fin repair metal tubular delineator made out of ABS round body fitted with 2 Nos of 65mm dia highly reflective reflectors made of PMMA and mounted on 45'50mm dia MS Pipe medium weight of 600mm height, duly powdered coated and thermoplastic elastomer 3 bands of green, red and yellow reflector, radium tape of 25mm wide strips with anti theft metal net for reflector protection, including embedded in PCC 1:2:4, type B1 using 20mm graded stone aggregate foundation of size 150 x 150 x 300mm complete all as specified and directed.

S&F in repair Road safety polycarbonate convex traffic mirror 80cm dia, encased in ABS materials, highly visible orange colour/visor for outdoor type, weather proof, brackets with horizontal and vertical angle adjustment fixed in and including 2.10m high and 75mm dia GI pipe as stand, fixed in ground with 60cm x60cm x75 cm PCC block with cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and including necessary form work, earth work excavation, removal of excess soil to a distance not exceeding 50m etc., complete all as specified and directed.

Manufacturing, supplying and fixing retro reflective Overhead informatory road signage and boards of size 1.50 sqm, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat incluidng taking out / down old road signage & removing from site of work. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.

S&F in repairs Speed breakers (Road bump) made of ABS plastic, of size 750x250x75mm per piece with two reflectors of size 70mmx23mm on each piece fixed on road surface with appropriate nos of mild steel pins and epoxy adhesive complete all as per manufactures instructions including taking out old unserviceable one complete all as specified and directed.

M & L Marking strip and painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow complete all as specified and as directed by Engineer-in-Charge.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes channels, plates etc, including welding, grinding, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangements complete all as specified and as directed by Engineer-in-Charge including dismantling old stainless steel Railing.

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing from site complete all as specified and as directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for cement concrete 1:2:4, type B1 using 20mm graded stone aggregate cement concrete as in kerbs or benching, mud stops, rounded or chamfered on edges including necessary form work etc complete all as specified and directed.