Military Engineer Services Tender

S & F sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with locking system complete all as specified and directed by Engineer-in-charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 20 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

All as per ser item No. 5.00 above herein before but for 32 Amps SPN MCB

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth for Stone concrete block or slab walls complete all as specified and directed by Engineer-in-charge.

M&L for cutting holes into or through stone walls built in cement mortar or cement lime mortar and walls of cement concrete for insertion of pipe and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required for not exc 150 Sqcm complete all as specified and directed by Engineer-in-charge.

S&F 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.

All as per ser item No. 9.00 above here-in-before but 20mm bore tubes

S&F bib tap 15 mm dia cast copper alongwith crutch or butterfly handle screwed down CP 15 mm dia fixed complete all as specified and directed by Engineer-in-charge.

S&F stop valve 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engineer-in-charge.

S & F 450 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete all as specified and directed by Engineer-in-charge.

S&F MNRE registered / approved polyester powder coated Solar water heater Flat plate collector with high transmitive clear toughened glass glazing having absorber material as headers, risers and fins made up of 99.9% pure copper with selective black chrome coating with ultra sonic laser permanent bonding between copper fins & tubesell complete suitable for 200 LPD and 200 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with Thermostat and heater coil 3 KW with required PCC work 1:2:4 for foundation/fixing all as specified and minimum one year warranty ccomplete all as specified and directed by Engineer-in-charge. Make : Su Solertech (SSSPL) / Solar Hitech / Racold / Sudarshan as approved by AGE(I)

S&F hot water pipe 15 mm bore 'Medium' grade galvanised with all GI fitting duly insulated with glass wool and aluminium cladding with 15 mm complete all as specified and directed by Engineer-in-charge.

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,1000 ltr capacity including, 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.

M&L for cross arms bracings supports, clamps and back plates fabricated from structural steel sections incl nuts bolts washers welding, bending cold or hot, drilling holes for bolts in any shpae or size as indicated or directed and inclusive of one primer coat of red oxide zinc chrome primer and two coats of aluminium paint complete all as specified and directed by Engineer-in-charge.

S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed of size 20mm dia complete all as specified and directed by Engineer-in-charge.